Proform 831297643 User Manual SPACE SAVER 580 SI Manuals And Guides 99020106
PROFORM Treadmill Manual 99020106 PROFORM Treadmill Owner's Manual, PROFORM Treadmill installation guides
User Manual: Proform 831297643 831297643 PROFORM PROFORM SPACE SAVER 580 SI - Manuals and Guides View the owners manual for your PROFORM PROFORM SPACE SAVER 580 SI #831297643. Home:Fitness Equipment Parts:Proform Parts:Proform PROFORM SPACE SAVER 580 SI Manual
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
PRO.FORM SEARS Model No. 831.297643 Serial No. The serialnumbercan be foundin the locationshownbelow.Writetheserial numberin the spaceabove. Number Decal _____.X _" R C I S, F_. EQUIPMENT HELPLINE! 1-800-736_6879 USER'S MANUAL SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179 PRO.FORM TABLE OF CONTENTS 3 IMPORTANT PRECAUTIONS ................................................................. BEFORE YOU BEGIN ....................................................................... ASSEMBLY ............................................................................... OPERATION AND ADJUSTMENT ............................................................. 4 5 7 HOW TO FOLD AND MOVE THE TREADMILL .................................................. TROUBLE-SHOOTING AND STORAGE ........................................................ CONDITIONING GUIDELINES ............................................................... ORDERING REPLACEMENT PARTS .................................................. FULL 90 DAY WARRANTY ........................................................... 10 12 14 Back Cover Back Cover Note: An EXPL(JDED DRAWING and a PART LIST are attached to the center of this manual. Save the EXPLODED DRAWING and PART LIST for future reference. per .:::.: ReEd all ::::_'amage. ....s_stalned by:p_" through the use of this product. _:...r ,, _>, ". _....: : . .:..:* : : .: . _:_'i:_:_.:,.-. .[: BEFORE YOU BEGIN Thank you for selecting the unique PROFORM ° 580si treadmill. The 580si treadmill blends advanced technology with innovative styling to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. The 580si offers an impressive array of features to make your workouts more enjoyable and effective. And when you're not exemising, the 580si can be folded up, requiring less than half the floor please call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays). To he!p us assist you, please note the product model number and seriai number before-calling. The model number of the treadmill is 831.297643. The sedal number can be found on a decal attached to the treadmill (see the front cover of this manual for the location). • space of other treadmills. For your benefit, reacl this manual carefully before using the treadmill. If youhave additional questions, Towel Rack Before reading further, please review the drawing below and familiarize yourself with the parts that are labeled. CoNsole Storage Latch Tray *A Water Bottle is not included Handrails" Walking Belt Breaker On/Off Padded Walking Platform FRONT BACK Leg Rear Roller Adjustment Bolt 4 RIGHT SIDE ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Tools required for assembly: The included allen wrench _ and your phillips screwdriver _ and two adjustable wrenches _ . i. See drawing 1A. Attach six Base Pads (95) to the bottom of the Base (73) in the indicated locations (see drawing 1B). Note: One additional Base Pad will be used in assembly step 6, and one extra Base Pad is included. 1A 1B I 9i f:::_>95 2. Firmly hold the Uprights (6. 88) as shown. Raise the Uprights until the Base (73) and the front Wheels (66) are resting on the floor. 2 P 3. Loosen the Crossbar Bolts (1) in the ends of the Console Crossbar (9). Pivot the Console (10) to the angle shown. Look under the Left and Right Crossbar Brackets (3, 36) and find the two small holes in each end of the Console 3 1,,,A_ 3 f"_ f -88 10 "i Crossbar (9). Tighten Crossbar Screws (84) into all four holes. Rotate the Console (10) upward until it stops. Using the 7/32" end of the Allen Wrench (83), tighten the Crossbar Bolts (1) in the ends of the Console Crossbar (g). 183 9 4. Next, the treadmill should be raised to the storage position. Hold the treadmill with your hands in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position. J 38 5. Move your right hand to the position shown at the right, and hold the treadmii_ firmly. Using your left hand. !iff the storage latch. Raise the treadmill until the locking pin snaps into the storage latch. Make sure that the locking pin is inside the storage latch, and that the storage latch is fully closed. See drawing 6B. Attach a Base Pad (95) to the bottom of the Stabilizer Plate (98) in the indicated location. . torage Latch_ 6A 6B See drawing 6A. Stand behind the treadmill. Hold the Left Crossbar Bracket (3) and the Right Crossbar Bracket (not shown). Place one fobt on the Base (73) in the indicated location. Tip the treadmill back slightly. While the treadmill is held in this position, a second person should slide the Stabilizer Plate (98) onto the Base (see drawing 6C). Keeping your foot on the Base, carefully tip the treadmill up until it is resting on the Base. Make sure that the Stabilizer Plate (98) stays on the Base. 95----_ 98 See drawing 6C. Attach the Stabilizer Plate (98) to the Base (73) with a Stabilizer Plate Bolt (91), two Stabilizer Plate Washers (70), and the Stabilizer Plate Nut (71) as shown. ,..._)/ Refer to assembly drawing 5 at the top of this page. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, lift the storage latch. Pivot the treadmill slightly until the locking pin is out of the storage latch. . 71,70" 7 ° Hold the treadmill firmly with both hands, and lower the treadmill to the floor, To decrease the possibility of injury, bend your legs and keep your back straight. 8: Remove the paper backing from the Adhesive Clip (26). Press the Adhesive Clip onto the Frame (49) in the indicated location. Press the Allen Wrench (83) into the Adhesive Clip. The use of the Allen Wrench is described on page 12. Make sure that all parts are tightened before you use the treadmill. Note: To protect the floor or carpet, place a mat under the treadmill. 49 OPERATION THE PERFORMANT AND ADJUSTMENT LUBE TM WALKING BELT electric shock. This product is equipped with a cord having an equlpment-grounding conductor and a grounding plug. Plug the power cord into a surge protector, and plug the surge protector into an appropriate outlet that Is properly installed and grounded in accordance with all local codes and ordinances. Your treadmill features a walking belt coated with PERFORMANT LUBE TM, a high-performance lubdcant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. They will deteriorate the walking belt and cause excessive wear. HOWTO This product is for use on a ilomina1120-volt circuit, and has a grounding plug that looks like the plug illustrated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge protector to a 2-pole receptacle as shown in drawing 2 if _apropedy grounded outlet is not available. PLUG IN THE POWER CORD The temporary adapter should be used only until a properly grounded outlet (drawing 1) can be installed by a qualified electrician. The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place by a metal screw. Some 2-pole receptacle outlet box covers are not grounded, Contact a qualified electrician to determine If the outlet box cover is grounded before using an adapter. Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your home's power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances being turned on or off. To decrease the possibility of your tread1 jGrounded Outlet Box mill being damaged, always use a surge protector (not InGrounding Pin cluded) with your treadmill. "_unding Surge protectors are sold at most hardware stores and department stores. Use only a ULlisted surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of Treadmill Power Cord-- Gmunding Plug _Grounded Outlet €_,/Grounded Outlet Box _.,/_Adapter _. (_. _ /.,,,:_ , Meta Screw /Grounding Pin Grounding Plug Surge Protector DIAGRAM OF THE CONSOLE Mode Indicators f _ FAT L \ _M e u_u_i I A V IIIli CD O \ \ 'Note: If there is a thin sheet of clear plastic on the face of the console, remove it. the power cord is propedy plugged in. (See HOW TO PLUG IN THE POWER CORD on page 7.) Next, step onto the foot rails of the treadmill. Find the clip attachedto the key (see the drawing above), and slide the clip onto the waistband of your clothing. Follow *.'_ ._t_s be!_.,.vto operate the console: g Insert the key fully into the power switch. The four displays and the green MANUAL mode indicator will light. It _=_i setting. Reset the speed control and select a speed STEP BY STEP CONSOLE OPERATION The treadmill console features a manual mode and six preset workout programs. In the manual mode, the speed of the walking belt can be changed with the electronic speed control. When oneof the workout programs is selected, the console will automatically controlthe speed as it guides you through an effective workout. console, make sure that the on/off switch Before the near theoperating power cord is in the =on" position, 8 "On" Position I if the key is in the console, remove it. Make sure that Slide the speed control down to the "RESET" position. Note: Each time the walklno belt is Stopoed. the speed control must be moved to the "RESET" oositlon before the walkina belt can be restarted. •ii,4 =a m II i i ,, H Next, slide the speed control upward to select a speed setting. Note: If the key was just RF.$&'_'/ inserted, or if the walking belt 2 $_='t,_DtJED was stopped with the START/STOP button, the walking belt will not begin to move yet. [_1 Press SELECT MODE button to select the desiredthemode. L_ Follow your progress with themonitor displays. The four monitor displays provide instant feedback: When the key is inserted, the console will be in the MANUAL mode. if you want to select one of the six preset programs, press the SELECT MODE button. The red PROGRAM A indicator SELECT MODE , will light. To select PROGRAM B, C, D, E, or F, repeatedly press the SELECT MODE button. Note: PROGRAMS A, B, and C are twenty-minute programs; PROGRAMS D, E, and F are thirtyminute programs. The speed profiles in the center of the console show how the speed of the walking belt will change during the programs. Dudng PROGRAM A, for example, the speed will gradually increase during the first ten minutes, and then gradually decrease during the last ten minutes. Each program will begin with a two-minute warm-up period, and end with a two-minute cool-down period. a Press the START/STOP START/STOP button is pressed, the walking belt After thewill begin to move. Hold the handrails and care- • CAL/FAT CAL display--Displays the approximate numbers of Calories and Fat Calodes you have burned (see BURNING FAT on page 14). Every seven seconds, the display will change from one number to the other (an "F" will appear when the number of Fat Calories is shown). Note: The actual r_umber of Calories you have burned may differ slightly from the number shown if the speed or incline is near the lowest or highest setting. • TIME display-When the console is in the manual mode, the elapsed time will be shown. When one of the preset programs is selected, the time remaining in the program will be displayed. button. I START /STOP fully begin walking on the walking belt. If the console is in the manual mode, change the speed of the walking belt as desired by sliding the speed control. To stop the walking belt, slide the speed control to the "RESET" position. The walking belt can also be stopped by pressing the START/ STOP button; however, this will reset the displays. • SPEED display-Displays the speed of the walking belt, in miles per hour (MPH) or kilometers per hour (KPH). Note: To change the unit of measurement, hold down the START/STOP button while inserting the key into the console. An "15"(for English system---rniles per hour) or "M" (for Metric system-kilometers per hour) will appear in the DISTANCE/PULSE display. Press the SELECT MODE button to select the desired setting. Remove and then reinsert the KEY. An MPH or a KPH will appear in the SPEED display to show which unit of measurement you have selected. If one of the preset programs is selected, the speed setting you selected will be the minimum speed setting for the program. The speed of the walking belt will then change automatically during the program as shown by the speed profiles in the center of the console. When the program is completed, the walking belt will automatically slow to a stop. Note:.lfibe_Jn_ .............. _DISTA_N_CFJ ....... tensity level of the program is too easy or too difficult, adjust the speed control to select a new minimum speed setting. To stop the program temporarily, slide the speed control to the "RESET" position. To restart the program, slide the speed control up to the desired position. To terminate the program before the program is completed, press the START/STOP button. If you select a different program while a program is running, the walking belt will slow to a stop. -t PULSE display-IT1 Displays the dis_;I tance you have i-" walked or run. If an / MPH appears in the SPEED display, the distance will be displayed in miles. If a KPH appears, the distance will be displayed in kilometers. This display also shows your pulse when the pulse sensor is used (see step 6). r_ Measure your pulse, if desired. B To use the Change the incline of the treadmill, if desired. To change the incline, hold down one of the incline buttons until the desired incline is reached. puls6 3ansor, stand on the foot rails and place your thumb on [] the pulse sensor as shown. The pulse sensor is pressure-activated, Fully press down the pulse sensor. Do not press too hard, or the clrculaUon In your thumb will be restdcted, and your pulse will not be detected. Next, slightly raise your thumb until the heart in the-DISTANCE/ PULSE display flashes steadily. Hold your thumb at this level. After 5 to 10 seconds, your pulse will be displayed. Hold your thumb on the sensor for another 15 seconds for the most accurate reading. If the displayed pulse appears to be too high or too low, or if your pulse is not displayed, lift your thumb off the sensor and allow the display to reset. Press down again on the sensor as described above. Make sure that your thumb is positioned as shown, and that you are applying the proper amount of pressure to the pulse sensor. Try the sensor several times until you become familiar with it. Remember to stand stillwhile measuring your pulse. V INCUNE When you are finished, remove the key. Step onto the foot rails and remove the key from the console. Store the key in a secure place. In addition, move the on/off I I switch to the =off" position. (See the drawing near the bottomof page 8.) THE INFORMATION MODE The console features an information mode that keeps track of the total time and distance accumulated on the treadmill. To access this mode, hold down the START/STOP button while inserting the key into the console. The TIME display will show the total time. The SPEED display will show the total distance (if the total distance exceeds 999, the thousands and ten thousands digits will be shown in the CAUFAT CAL display). The DISTANCE/PULSE display will show an =E" or an =M," indicating miles or kilometers (see SPEED DISPLAY on page 9). To exit the information mode, remove the key from the console. HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL A FOR STORAGE Before folding the treadmill for storage, unplug the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) In order to raise, lower, or move the treadmill. 1. Hold thetreadmiil widthyour Ilands in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position. 2. Move your right hand to the position shown at the right, and hold the treadmill firmly. Using your left hand, lift the storage latch. Raise the treadmill until the locking pin snaps into the storage latch. Make sure that the locking pin is inside the storage latch, and that the storage latch is fully closed. Storage Latch, To protect the f!oor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85 ° Fahrenheit. HOW TO MOVE THE TREADMILL Before moving the treadmill, convert the treadmill to the storage position as described above. 1. Make sure that the locking pin is inside the storage latch, and that the storage latch is fully closed. 2: Hold one crossbar bracket with each hand. Place one foot on the base as shown. 3. Tilt the treadmill back until it rolls freely on the front wheels. Carefully move the treadmill to the desired location. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface. 4. Place one foot on the base, and carefully lower the treadmill until it is resting in the storage position. HOW TO FOLD THE TREADMILL DOWN FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, lift the storage latch. Pivot the treadmill slightly until the locking pin is out of the storage latch. Make sure that the storage latch is fully closed. Storage Latch \ 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the possibility of injury, bend your legs and keep your back straight. 11 TROUBLE-SHOOTING AND STORAGE Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at 1-800-7366879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays). 1. SYMPTOM: THE POWER DOES NOT TURN ON a. Make sure that the power cord is plugged into a surge protector, and that the surge protector is plugged into a properly grounded outlet. (See HOW TO PLUG IN THE POWER CORD on page 7.) Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. After the power cord has been plugged in, make sure that the key is fully inserted into the console. Vadous indicators on the console should light. (See step 1 page 8.) c. Check the circuit breaker located on the treadmill near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in. Tripped Reset d. Check the on/off switch located at the front of the treadmill near the power cord. The switch must be in the "on" position. "On" "_ Position 2. SYMPTOM" THE POWER TURNS OFF DURING USE a. Check the circuit breaker located on the treadmill frame near the power cord. If the circuit breaker has tripped (see the drawing above), wait for five minutes and then press the switch back in. b. Make sure that the power cord is plugged in. c. Remove the key from the console. Reinsert the key fully into the console. (See step 1 on page 8.) d. Check to make sure that the on/off switch is in the =on" position. (See 1. d. above.) e. If the treadmill still will not run, please call our toll-free HELPLINE. 3. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. If the walking belt still slows when walked on, please call our toll-free HELPLINE. 4.. SYMPTOM: THE WALKING BELT IS OFF-CENTER OR SLIPS WHEN WALKED ON a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using the 3/16" end of the allen wrench, turn the left rear roller adjustment bolt clockwise 1/4 of a turn. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered. 12 a b. If the walking be!t has shifted to the right, first remove the key and UNPLUG THE POWER CORD. Using the 3/16" end of the allen wrench, turn the left rear roller adjustment bolt counterclockwise 1/4 of a turn. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered. 13 CONDITIONING GUIDELINES Training Zone (Beats/Min.) Age Unconditioned Conditioned 20 138-167 133-162 25 136-166 132-160 30 135-164 130-158 35 134-162 129-156 40 132-161 127-155 •45 131-159 125-153 50 129-156 124-150 The following guidelines will help you to plan your exercise program. Remember--these are general guidelines. For more detailed information about exercise, 55 127-155 122-149 60 126-153 121-147 obtain a reputable book or consult your physician. 65 125-151 119-145 7O 123-150 118-144 75 122-147 117-142 80 120-146 115-140 85 118-144 114-139 EXERCISE iNTENSITY Whether you want to bum fat, strengthen your cardiovascular system, or increase your athletic performance, you can tailor your exercise to your specific goals. The key to achieving the desired results is to exercise with the proper intensity. Burning Fat To bum fat effectively, you must exercise at a relatively low intensity level for a sustained period of time. During the first few minutes of exemise, your body uses easily accessible carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to bum fat, set the speed control on the console to FAT BURN to help you maintain the proper intensity level. (See pages 8 and 9.) Aerobic Exercise If your goal is to strengthen your cardiovascular system, your exercise must be "aerobic." Aerobic exercise is activitythat requires large amounts of oxygen for prolonged pedods of time. This increases the demand or_the heart to pump blood to themuscles, and on the lungs to oxygenate the blood. The proper intensity level for aerobic exercise can be found by using your pulse as a guide. As you exercise, your pulse should be kept at a level between 70% and 85% of your maximum possible heart rate. This is known as your training zone. You can find your training zone in the table at the top of this page. Training zones are listed accordingto age and physical condition. 14 During the first few months of your exercise program, keep your pulse near the low end of your training zone as you exercise. After a few months of regular exercise, your pulse can be gradually increased until it is near the middle of your training zone as you exercise. You can measure your pulse using the pulse sensor. Exercise for about four minutes, and then measure your pulse immediately. If your pulse is too high or too low, adjust the intensity of your exercise. It may also be helpful to set the speed control on the console to AEROBIC to help you maintain the proper intensity level. (See pages 8 and 9.) Performance Training If your goal is high performance athletic conditioning, set the speed control on the console to PERFORMANCE to help you maintain the proper intensity level. (See pages 8 and 9.) WORKOUT GUIDELINES Each workout should include three pads: (1) a warmup, (2) training zone exercise, and (3) a cool-down. Warm-up Warming up prepares the body for exercise by increasing circulation, delivering more oxygen to the muscles and raising the body temperature. Begin each workout with 5 to 10 minutes of stretching and light exercise to warm up (see SUGGESTED STRETCHES on page 15). T,_aining Zone Exercise After warming up, increase the intensity of your exercise until your pulse is in your training zone for 20 to 60 minutes. (During the first few weeks of your exer-. cise program, do not keep your pulse in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exercise-never hold your breath. to cool down. This will increase the flexibility of your muscles and will help to prevent post-exercise problems. Exercise Frequency To maintain or improve your condition, complete three workouts each week, with at least one day of rest between workouts. After a few months, you may complete up to five workouts each wee_: if desired. Cool-down Finish each workout with 5 to 10 minutes of stretching SUGGESTED The key to success is to make exercise a regular and enjoyable part of your everyday life. STRETCHES The correct form for several basic stretches is shown in the drawings below. Move slowly as you stretch--never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees and back. 2 2. Hamstring Stretch Sit with one leg extended. Bdng the sole of the opposite foot toward you and rest it against the inner thigh of your extended leg. Reach toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times for both legs. Stretches: Hamstrings, lower back and groin. 3, Calf/Achilles Stretch With one leg in front of the other, reach forward and place your hands against a wall. Keep your back leg straight and your back foot flat on the floor. Bend your front leg, lean forward and move your hips toward the wall. Hold for 15 counts, then relax. Repeat 3 times for both legs. To cause further stretching of the achilles tendons, bend your back leg as well. Stretches: Calves, achilles tendons and ankles. 4. Quadriceps 3 4 Stretch With one hand against a wall for balance, reach back and grasp one foot with your other hand. Bring your heel as close to your buttocks as possible. Hold for 15 counts, then relax. Repeat 3 times for both legs. Stretches: Quadriceps and hip muscles. 5. Inner Thigh Stretch Sit with the soles of your feet together and your knees outward, Pull your feet toward your groin area as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Quedriceps and hip muscles. 15 SEARS The model number and serial number of your PROFORM ®580si treadmill are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal. Model No. 831.297643 QUESTIONS? All replacement parts are available for immediate purchase or special order when you visit your nearest SEARS Service Center. To request service or to order parts by telephone, call the toU-free numbers listed at the left. If you find that: • you need help assembling or operating the PROFORM* 580sl treadmill • a part Is missing When requesting help or service, or ordering pads, please be prepared to providethe following information: • The NAME OF THE PRODUGT (PROFORM = 580si treadmill) • or you need to schedule repair service call our toll-free HELPLINE • The MODEL NUMBER OF THE PRODUCT (831.297643) • The PART NUMBER OF THE PART (see the EXPLODED DRAWING and PART LIST attached to the center of this manual) 1-800-736-6879 Monday-Saturday, 7 am-7 pm Central Time (excluding holidays) • The DESCRIPTION OF THE PART (see the EXPLODED DRAWING and PART LIST attached to the center of this manual) REPLACEMENT PARTS If parts become worn and need to be replaced, call the following toll-free number 1-800-FON-PART (1-800-366-7278) I FULL 90 DAY WARRANTY I For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this SEARS TREADMILL EXERCISER, contact the nearest SEARS Service Center throughout the United States and SEARS will repair or replace the TREADMILL EXERCISER, free of charge. This warranty does not apply when the TREADMILL EXERCISER is used commercially or for rental purposes. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179 • Part No. 129598 F00445-C R0396A Printed in USA © 1996 Sears, Roebuck and Co.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 16 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Mon Apr 02 11:11:59 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools