Proform 831297793 User Manual J6SI EKG Manuals And Guides L0802678

PROFORM Treadmill Manual L0802678 PROFORM Treadmill Owner's Manual, PROFORM Treadmill installation guides

User Manual: Proform 831297793 831297793 PROFORM PROFORM J6SI EKG - Manuals and Guides View the owners manual for your PROFORM PROFORM J6SI EKG #831297793. Home:Fitness Equipment Parts:Proform Parts:Proform PROFORM J6SI EKG Manual

Open the PDF directly: View PDF .
Page Count: 22

Download
Open PDF In Browser	View PDF

Model No. 831.297793
Serial No.
Find the serial number in the location
shown below. Write the serial number
in the space above for reference.

Serial
Decal

EXERCISE

HELPL|NE!

1-800-736-6879

kCAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.

SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179

TABLE OF CONTENTS
IMPORTANT PRECAUTIONS .................................................................
BEFORE YOU BEGIN .......................................................................
ASSEMBLY ...............................................................................
OPERATION AND ADJUSTMENT
.............................................................
HOW TO FOLD AND MOVE THE TREADMILL ..................................................
MAINTENANCE AND TROUBLE-SHOOTING
...................................................
CONDITIONING GUIDELINES ...............................................................
PART LIST ...............................................................................
ORDERING REPLACEMENT PARTS ..................................................
FULL 90-DAY WARRANTY ...........................................................
Note: An EXPLODED DRAWING is attached in the center of this manual.

3
5
6
9
14
15
17
19
Back Cover
Back Cover

iMPORTANT PRECAUTIONS
DANG ER: Toreduce
theriskofburns,
fire,electric
shock,
orinju topersons,
read
the
following

important precautions and information before operating the treadmill.

It is the responsibility of the owner to ensure
that all users of this tread mill are adequately
informed of all warnings and precautions,

of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor
must be electrically rated for 120 volts AC and
15 amps.

2. Use the treadmill only as described in this
manual.

12. Keep the power cord and the surge suppressor away from heated surfaces.

3. Place the treadmill on a level surface, with at
least eight feet of clearance behind it. Do not
place the treadmill on any surface that blocks
air openings. To protect the floor or carpet
from damage, place a mat under the treadmill,
4.

13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 5 if the treadmill is not working properly.)

Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

14. Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.

5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.

15. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.

6. Keep children under the age of 12 and pets
away from the treadmill at all times.
7.

16. The pulse sensor is not a medical device.
Various factors, including the user's movemerit, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.

The treadmill should not be used by persons
weighing more than 250 pounds.

8. Never allow more than one person on the
treadmill at a time.
9. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose clothing that could become caught in the treadmill,
Athletic support clothes are recommended for
both men and women. Always wear athletic
shoes. Never use the treadmill with bare feet.
wearing only stockings, or in sandals.

17. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 5 for the Iocation of the on/off switch.)
18. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6. and HOW TO MOVE
THE TREADMILL on page 14.) You must be
able to safely lift 45 pounds (20 kg) in order to
raise, lower, or move the treadmill.

10. When connecting the power cord (see page
9), plug the power cord into a surge suppressor (not included) and plug the surge suppressor into a grounded circuit capable of
carrying 15 or more amps. No other appliance
should be on the same circuit. Do not use an
extension cord.

19. Do not change the incline of the treadmill
placing objects under the treadmill.

11. Use only a single-outlet surge suppressor
that is UL 1449 listed as a transient voltage
surge suppressor (TVSS). The surge suppressot must have a UL suppressed voltage rating

20. When folding or moving the treadmill, make
sure that the storage latch is fully closed.

21. Inspect and tighten all parts of the treadmill
regularly.
22. Never drop or insert any object into any
e pening.

23.DAN G ER: Always

thepower

unplug
cord immediately after use, before cleaning
the treadmill, and before performing the maintenance and adjustment procedures de-

scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.
24. This treadmill is intended for in-home use
only. Do not use this treadmill in any commercial, rental, or institutional setting.

_WARNING:

Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. SEARS assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS
The decals shown at the right and below
have been placed on your treadmill. If a
decal is missing, or if it is not legible,
please call our toll-free HELPLINE to
order a free replacement decal (see the
back cover of this manual). Apply the
decal in the location shown.

ACAUTiON
KEEP HANDSAND FEETAWAY

FROMTHiSAREAWHILETHE
TREADMILLiS iN OPERATION.

, Never allow children on
or around treadmill,
• Storage latch must be
fully engaged before
treadmill
is moved or
stored,
• incline must be set at
lowest level before folding
treadmill
into storage
position.

BEFORE YOU BEGIN
Thank you for selecting the new PROFORM ®J6si
treadmill. The J6si treadmill combines advanced tech-

Monday through Saturday, 7 a.m. until 7 p.m. Central
Time (excluding holidays). To help us assist you,
please note the product model number and serial number before calling. The model number of the treadmill
is 831.297793. The serial number can be found on a

nology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience
and privacy of your home. And when you're not exercising, the unique J6si can be folded up, requiring less
than half the floor space of other treadmills.

decal attached to the treadmill (see the front cover of
this manual for the location).

For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
please call our toll-free HELPLINE at 1-800-736-6879,

Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.

Book Holder
Water Bottle
Holder (Bottle
not included)

Console

Pulse Sensor
Handrail
Storage Latch

LEFT SIDE

RIGH

SIDE

On/Off Switch

Walking Belt

Circuit
Breaker

Front
Wheel

Foot Rails

Power Cord
Cushioned Walking Platform
r Roller
Adjustment Bolts

ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips

screwdriver

@_C]_,

adjustable

With the help of a second person, carefully raise the
treadmill to the upright position. While the other person
tips the treadmill to one side and holds it, insert one of the
Extension Legs (103) into the treadmill. Make sure that
the Extension Leg is turned so the Warning Decal (20) is
on top. Tighten two of the four Short Screws (101) into the
treadmill and the Extension Leg.

wrench

and scissors

___.

Next, tip the treadmill to the other side and attach the other
Extension Leg (not shown) in the same way. Lower the
side of the treadmill so that both Extension Legs (103) are
resting flat on the floor.
Refer to HOW TO LOWER THE TREADMILL

FOR USE

on page 14. Follow step 2 to lower the treadmill.
Attach the latch support to the center hole in the left Upright
(82) with a 3/4" Screw (81) as shown. Make sure that the
Screw is tight, but do not overtighten it; if the Screw
is overtightened,
the latch will not slide smoothly.
Remove the tape from the Latch Assembly (77). Be careful to hold the parts together. Inset drawings A and B
show how the parts fits together. Make sure that the tabs
on the latch are touching one side of the bracket and the
back end of the latch is flush with the other side of the

82_
77 81

Bracket

....°

II_'_"_._'_ [

Support
Latch

Tabs

Flush,_ _7,
Spring._

i!_.

Spring-- _._

bracket. Then, insert the two springs into the bracket.
Attach the Latch Assembly (77) to the left Upright (82)
with two 3/4" Screws (81).

Cut the plastic tie off the bracket on the base of each
Upright (82).

Pla

Next, cut the plastic tie off the Left Handrail (74).
Position the Left Handrail on the left Upright (82). The
bracket on the base of the left Upright should be inside
of the lower end of the Left Handrail, as shown in the
inset drawing.

Tie

_)/_

While a second person holds the Right Handrail (85) and
the Console Base (87) near the right Upright (82), cut the
indicated plastic ties off the Right Handrail. Do not cut
the other plastic tie off the Right Handrail, Next, cut
the plastic tie off the Upright Wire Harness (34) in the
right Upright (82). Do not drop the Upright Wire
Harness into the right Upright,

Do not

Refer to the inset drawing. Connect the Upright Wire
Harness (34) to the Console Wire Harness (48). The
latch on the Console Wire Harness should snap onto the
Upright Wire Harness. If the Wire Harnesses do not fit
together easily, turn them; do not force the Wire
Harnesses together,

85
Cut Plastic Tie

Next, connect the right pulse wire, the left pulse wire and
the ground wire to the corresponding connectors on the
Console Wire Harness (48); make sure that the wires
with tags are connected to each other,

Note that there is still a wire tie in the Right
Handrail (85); do not remove this wire tie,

Do not
Remove
Wire Tie

87
Set the left side of the Console Base (87) on the Left
Handrail (74). Insert as much of the wires as possible into the Right Handrail (85) and down into the
right Upright (82).

Next, set the right side of the Console Base (87) on the
Right Handrail (85). Insert all excess Console Wire
Harness (48) into the Right Handrail,

6. Position the Right Handrail (85) on the right Upright (82)
as shown; be careful not to damage the wires, The
bracket on the base of the right Upright should be inside
of the lower end of the right Handrail, as shown in the
inset drawing.
Thread two Handrail Bolts (78) with Washers (36) into the
Left Handrail (74) and the left Upright (82) as shown. Do
not tighten the Handrail Bolts yet. Next, thread two
Handrail Bolts (78) with Washers (36) into the Right
Handrail (85) and the right Upright (82). Do not tighten
the Handrail Bolts yet. Be careful to avoid damaging
the wires,

"ket

7. AttachtheConsoleBase(87)totheLeftandRight
Handrails
(74,85)withfourLongScrews(114).

7
87

Refer to assembly step 6. Tighten the four Handrail
Bolts (78) used in assembly step 6,

8. Press two Small Upright Plugs (79) into the holes near
the upper ends of the Uprights (82).

9. Remove the backing from the Adhesive Clip (99). Press
the Adhesive Clip onto the base of the right Upright (82)
as shown. Press the Allen Wrench (100) into the
Adhesive Clip.

S O
99

10. Make sure that all parts are tightened before you use the treadmill, To protect the floor or carpet, place a
mat under the treadmill.

OPERATION AND ADJUSTMENT
THE PERFORMANT

LUBE TM WALKING BELT

This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illustrated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available.

Your treadmill features a walking belt coated with
PERFORMANT LUBE TM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking platform. Such substances will deteriorate the walking
belt and cause excessive wear,
HOW TO PLUG IN THE POWER CORD

Outlet Box

Jk DANG ER:

Improper

Suppressor

connection

Grounding Pin

of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug p rovided with the product--if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.

Grounding Pin
Grounded Outlet

Grounding Plug

Grounded Outlet Box
Adapter

Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances
being turned on or off. To decrease the possibility of
your treadmill being damaged, always use a surge
suppressor with your treadmill (see drawing 1 at
the right).

Metal Screw

Surge suppressors are sold at most hardware stores
and department stores. Use only a single-outlet surge
suppressor that is UL 1449 listed as a transient voltage
surge suppressor (TVSS). The surge suppressor must
have a UL suppressed voltage rating of 400 volts or
less and a minimum surge dissipation of 450 joules.
The surge suppressor must be electrically rated for
120 volts AC and 15 amps.

The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified electrician to determine if the outlet box cover is

This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug. Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances,

grounded before using an adapter,

CONSOLE DIAGRAM
Incline Display

LED Track

Displays

SI'_ED

mODE

Note: If there is a thin sheet of clear plastic
on the face of the console, remove it.

STEP-BY-STEP

CONSOLE OPERATION

CAUTION: Before
operating the
Note: The treadmill console can display speed and
distance in either miles or kilometers (see SPEED
DISPLAY on page 12). For simplicity, all instructions
in this section refer to miles.

console, read the following precautions.
• Do not stand on the walking belt when turning on the power.

Before operating the
console, make sure that
the on/off switch, located near the power
cord, is in the on position.

• Always wear the cli p (see the drawing above)
while operating the treadmill.
• Adjust the speed in small increments to
avoid sudden jumps in speed.
• To reduce the possibility of electric shock, keep
the console dry. Avoid spilling liquids on the
console, and place only sealed water
bottles in the water bottle holders.

Position

Next, plug in the power cord (see HOW TO PLUG IN
THE POWER CORD on page 9). Note: If the key is in
the console, remove it before plugging in the power
cord.
Step onto the foot rails of the treadmill. Find the clip
attached to the key (see the drawing above), and slide
the clip onto the waistband of your clothing. Follow the
steps below to operate the console.

FEATURES OFTHECONSOLE
The treadmill console offers an impressive array of features designed to help you get the most from each
workout. When the manual mode of the console is selected, the speed and incline of the treadmill can be
changed with a touch of a button. As you exercise, an
LED track and four displays will provide continuous
exercise feedback. With the built-in pulse sensor, you
can even measure your heart rate. In addition, the console offers four workout programs. Each program will
automatically control the speed of the treadmill as it
guides you through an effective workout.

Insert the key into the console.
A moment after the
key is inserted, the
four displays and
various indicators
will light.

Press the START/STOP
walking belt.

Press the MODE button to select the desired
mode,
When the key is
inserted, the manual
mode will be
selected, as shown
by the MANUAL indicator. The manual
mode can also be
selected by repeatedly pressing the
MODE button.

SPEED

A moment after the START/STOP button is
pressed, the walking belt will begin to move.
Hold the handrails and carefully begin walking.

PROGRAMS

__A ROBIC 1

if the manual mode is selected: As you exercise,
change the speed of the walking belt as desired by
pressing the SPEED buttons.

MANUAL

To stop the walking belt, press the START/STOP
button. The TIME/PACE display will begin to flash.
To restart the walking belt, press the START/STOP
button again. To stop the walking belt and reset
the displays, press the START/STOP button, remove the key from the console and then reinsert
the key.

MODE

To select one of the
four workout programs, press the MODE button
repeatedly until the AEROBIC 1, AEROBIC 2, FAT
BURN 1 or FAT BURN 2 indicator lights.
Note: The two AEROBIC programs are twenty
minutes long; the two FAT BURN programs are
thirty minutes long. The graphs on the right side of
the console show how the speed of the walking
belt will change during the programs. During the
AEROBIC 1 program, for example, the speed will
gradually increase during the first ten minutes and
then gradually decrease during the last ten minutes. Each program begins with a warm-up period
and ends with a cool-down period.

If a preset program is selected: The speed of the
walking belt will change automatically during the
program as shown by the graphs on the right side
of the console. The time remaining in the program
will be shown in the TIME/PACE display. When the
program is completed, the walking belt will slow to
a stop.
If the program is too
difficult or too easy, the
difficulty level of the
program can be adjusted. Press the
SPEED J_,or '_:'button.

Set the desired maximum speed setting.
If you selected the manual mode, go to step 4.
If a workout program is selected, a
number will flash in

button to start the

A number will begin to
flash in the SPEED display. This number is the
maximum speed that the walking belt will reach
during the program. Press the SPEED J%or V button repeatedly to change the maximum speed setting. If the maximum speed setting is increased, the
difficulty level of the entire program will increase, tf
the maximum speed setting is decreased, the difficulty level of the entire program will decrease.

A, _L

...........

MA_

the SPEED display.
This number is the
maximum speed that
the walking belt will
reach during the selected program. If you want to
change the maximum speed setting, press the
SPEED/_ button. The maximum speed setting can
be from 4 mph and 10 mph. If the maximum speed
setting is increased, the difficulty level of the entire
program will increase, tf the maximum speed setting is decreased, the difficulty level of the entire
program will decrease.

To stop the program for a moment, press the
START/STOP button. The TIME/PACE display
will begin to flash. To restart the program, press
the START/STOP button again. To stop the program and reset the displays, press the START/
STOP button, remove the key from the console
and then reinsert the key. Note: Pressing the
MODE button will also stop the program, reset the
displays and select a different mode.

9
11

_.'t

SPEEOd"
I '11

Change the incline of the treadmill as desired.

display shows the speed
of the walking belt, in

To change the incline of the treadmill, press the
incline buttons. Each time one of the buttons is
pressed, the incline will change by 0.5%. The buttons can be held down to change the incline rapidly.

miles per hour or kilome_] SPE_
ters per hour. The letters
"MPH" or "KPH" will appear to show which unit of measurement is selected.
To change the unit of
measurement, hold down
the START/STOP button

GRADE

INCLINE

Note: In the incline display, the first indicator will
light when the incline is set at 1.5%. The second
indicator will light when the incline is set at 2% or
2.5%, the third indicator will light when the incline
is set at 3% or 3.5%, and so forth. After the incline
buttons are pressed, it will take a moment for the
treadmill to reach the selected incline setting.

[ E

while inserting the key
DISTANCE
LAPS
into the console. An "E,"
for english miles, or an
"M," for metric kilometers, will appear in the DISTANCE/LAPS display. Press the SPEED _ button
to change the unit of measurement. Remove and
then reinsert the key.

POWER

MPH

CALS/FAT CALS/
PULSE display--This
display shows the approximate numbers of
calories and fat calories

PULSE

122
CALS.

EAT CALS.

you have burned (see
FAT BURNING on page 17). Every seven seconds, the display will change from one number to
the other, as shown by the arrows in the display.
This display will also show your heart rate when
the pulse sensor is used (see step 7).

Follow
progress with the LED track and
the fouryour
displays.
The LED Track-The LED track represents a distance

of 1/4 mile. As you
exercise, the indicators around the

Measure your heart rate, if desired.
Stand on the
foot rails and

track will light one
at a time until you
have completed 1/4 mile. A new lap will then begin.

place your
hands on the
metal contacts
on the handrail.
Your palms
must be resting
on the upper
contacts, and
your fingers must
be touching the
lower contacts--

DISTANCE/LAPS

Arrow
display--This display
shows the distance that
v
you have walked or run
DISTANCE
LAPS
and the number of laps
you have completed (one
lap equals 1/4 mile). The display will alternate
between one number and the other every seven
seconds, as shown by the arrows in the display.

Metal Contacts

PULSE

-t29
CALS.

FAT CALS.

avoid moving
your hands while measuring your heart rate. After
a moment, the heart-shaped indicator in the
CALS/FAT CALS/PULSE display will flash
steadily and a "P" will appear in the display. After
a few seconds, three dashes (- - -) will appear in
the display and your heart rate will be shown. For
the most accurate heart rate reading, continue to
hold the contacts for about 15 seconds.

TIME/PACE display-This display shows the
elapsed time and your current pace (pace is meaTIME
PACE
sured in minutes per mile).
The display will alternate
between one number and the other every seven
seconds, as shown by the arrows in the display.

PULSE SENSOR TROUBLE-SHOOTING
When
key. you are finished exercising, remove the
Make sure to stand on the foot rails and avoid
moving your hands while measuring your heart
rate. Excessive movement may interfere with heart
rate readings. If the pulse sensor is not used correctly,
your heart rate will not be shown.

Step onto the foot rails and remove the key from
the console. Keep the key in a secure place.
In addition, move the on/off switch to the off position and unplug the power cord. (See the drawing
on page 10.)
THE INFORMATION

Do not hold the metal contacts too tightly; doing so
may interfere with heart rate readings.

MODE
For the most accurate heart rate reading, wait for
about 15 seconds.

To access the information mode, hold down the START/
STOP button while inserting the key into the console.
An "Ei' for english miles, or
an "M," for metric kilometers,
will appear in the DISTANCE/
LAPS display. If you want to
change the unit of measurement, press the SPEED _
button.

For optimal performance of the pulse sensor, keep
the metal contacts clean. The contacts can be
cleaned with a soft cloth--never use alcohol,
abrasives, or chemicals.

......
! E
DISTANCE

LAPS

The TIME/PACE display will
show the total number of
hours the treadmill has been
used.
TiME

PACE

The SPEED display will
show the total number of
miles that the walking belt
has moved.

To exit the information
console.

mode,

remove

the key from the

HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL

FOR STORAGE

Before folding the treadmill, adjust the incline to the
lowest position. If this is not done, the treadmill may be
permanently damaged. Next, unplug the power cord.
CAUTION: You must be able to safely lift 45 pounds (20
kg) in order to raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight. As
you raise the treadmill, make sure to lift with your legs
rather than your back. Raise the treadmill about halfway
to the vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left thumb, slide the storage
latch to the left and hold it. Raise the treadmill until the

Open

storage latch closes over the catch. Make sure that the
storage latch is fully closed over the catch,
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85 ° Fahrenheit.

Closed

Storage
_

Latch_
--_ Catch --

i_
uff=_.

HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the storage latch is closed fully over the catch.

- Book Holder

1. Hold the handrails as shown and place one foot against a
wheel. Do not hold or push on the book holder or the
book holder may be damaged,
2. Tilt the treadmill back until it rolls freely on the front wheels.
Carefully move the treadmill to the desired location. Never
move the treadmill without tipping it back. To reduce
the risk of injury, use extreme caution while moving
the treadmill, Do not attempt to move the treadmill
over an uneven surface,
Base
3. Place one foot on the base, and carefully lower the treadmill until it is resting in the storage position.
HOW TO LOWER THE TREADMILL

- Front Wheels

FOR USE

1. Refer to drawing 2 above. Hold the upper end of the treadmill with your right hand as shown. Using your left
thumb, slide the storage latch to the left and hold it. Pivot the treadmill down until the frame is past the storage
latch.
2. Refer to drawing 1 above. Hold the treadmill firmly with both hands, and lower the treadmill to the floor.
CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight,
14

MAINTENANCE

AND TROUBLE-SHOOTING

Most treadmill problems can be solved by following the simple steps below. Find the symptom that
applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at
1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays).
1. SYMPTOM: THE POWER DOES NOT TURN ON
a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged
into a properly grounded outlet (see page 9). Use only a single-outlet surge suppressor that is UL 1449
listed as a transient voltage surge suppressor (TVSS). The surge suppressor must have a UL suppressed
voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor
must be electrically rated for 120 volts AC and 15 amps.
b. After the power cord has been plugged in, make sure that the key is inserted into the console as far as it will
go. See step 1 on page 10.
c. Check the circuit breaker located on the treadmill near the
power cord. If the switch protrudes as shown, the circuit
breaker has tripped. To reset the circuit breaker, wait for five
minutes and then press the switch back in.
d. Check the on/off switch located on the treadmill near the
power cord. The switch must be in the on position.

Reset

Tripped

Position

2. SYMPTOM: THE POWER TURNS OFF DURING USE
a. Check the circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If the circuit
breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Reinsert the key fully into the console. See step 1 on page 10.
d. Make sure that the on/off switch is in the on position.
e. If the treadmill still will not run, please call our toll-free HELPLINE.
3, SYMPTOM: THE DISPLAYS OF THE CONSOLE DO NOT FUNCTION PROPERLY
a. Remove the key and unplug the power cord, Remove the
screws from the hood. Carefully remove the hood. Locate the
Reed Switch (21) and the Magnet (43) on the left side of the
Pulley (42). Turn the Pulley until the Magnet is aligned with the
Reed Switch. Make sure that the gap between the Magnet and
the Reed Switch is about 1/8". If necessary, loosen the Reed
Switch Screw (76) and move the Reed Switch slightly. Retighten
the Screw. Re-attach the hood, and run the treadmill for a few
minutes to check for a correct speed reading.

4, SYMPTOM: The walking belt slows when walked on
a. Use only a UL-listed surge suppressor, rated at 15 amps, with a 14-gauge cord of five feet or less in length.
b. If the walking belt is overtightened, treadmill performance may
decrease and the walking belt may be permanently damaged.
Remove the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened,
you should be able to lift each side of the walking belt 3 to 4
inches off the walking platform. Be careful to keep the walking
belt centered. Plug in the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.
c. If the walking belt still slows when walked on, please call our tollfree HELPLINE.
5, SYMPTOM: The walking belt is off-center
a. If the walking belt has shifted to the left, first remove the key and
UNPLUG THE POWER CORD. Using the allen wrench, turn the
left rear roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each. Be careful not to overtighten the
walking belt. Plug in the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is centered.

b. If the walking belt has shifted to the right, first remove the key
and UNPLUG THE POWER CORD. Using the allen wrench, turn
the left rear roller adjustment bolt counterclockwise, and the right
bolt clockwise, 1/4 of a turn each. Be careful not to overtighten
the walking belt. Plug in the power cord, insert the key and run
the treadmill for a few minutes. Repeat until the walking belt is
centered.
6, SYMPTOM: The walking belt slips when walked on
a. If the walking belt slips when walked on, first remove the key and
UNPLUG THE POWER CORD. Using the allen wrench, turn
both rear roller adjustment bolts clockwise, 1/4 of a turn. When
the walking belt is correctly tightened, you should be able to lift
each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the
power cord, insert the key and carefully walk on the treadmill for
a few minutes. Repeat until the walking belt is properly tightened.

o,, A"

Rear Roller Adjustment Bolts

CONDITIONING
_WARNING:

GUIDELINES
uses easily accessible carbohydrate calories for energy. Only after the first few minutes does your body
begin to use stored fat calories for energy. If your goal
is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in
your training zone. It may also be helpful to use one of
the console's FAT BURN programs (see pages 10 to 13).

Before beginning this

or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with preexisting health problems.
The pulse sensor is not a medical device.
Various factors, including your movement,
may affect the accuracy of heart rate readings,
The sensor is intended only as an exercise aid
in determining heart rate trends in general.

For maximum fat burning, adjust the speed and incline
of the treadmill until your heart rate is near the middle
number in your training zone.
Aerobic Exercise
If your goal is to strengthen your cardiovascular system, your exercise must be "aerobic." Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the speed and incline of the treadmill until your
heart rate is near the highest number in your training
zone. It may also be helpful to use one of the console's
AEROBIC programs (see pages 10 to 13).

The following guidelines will help you to plan your exercise program. Remember--these are general guidelines only. For more detailed exercise information, obtain a reputable book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recommended heart rates for fat burning and aerobic exercise.

HEART
•

RATE

TRAiNiNG
165

155

145

140

130

125

115

MAX

145

138

130

125

118

110

103

125

120

115

110

105

FAT BURN
•

Age

Each workout should include the following three parts:
A Warm-up--Start
each workout with 5 to 10 minutes
of stretching and light exercise. A proper warm-up increases your body temperature, heart rate and circulation in preparation for exercise.

ZONES

AEROBIC
FAT 8URN

WORKOUT GUIDELINES

Training Zone Exercise--After warming up, increase
the intensity of your exercise until your pulse is in your
training zone for 20 to 60 minutes. (During the first few
weeks of your exercise program, do not keep your
pulse in your training zone for longer than 20 minutes.)
Breathe regularly and deeply as you exercise--never
hold your breath.

To find the proper heart rate for you, first find your age
near the bottom of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age. The three numbers define your "training zone." The lower two numbers are recommended
heart rates for fat burning; the higher number is the
recommended heart rate for aerobic exercise.

A Cool-down--Finish
each workout with 5 to 10 minutes of stretching to cool down. This will increase the
flexibility of your muscles and will help prevent post-exercise problems.

To measure your heart rate during exercise, use the
pulse sensor on the console. If your heart rate is too
high or too low, adjust the speed and incline of the
treadmill.

Exercise Frequency
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest between workouts. After a few months, you may complete up to five workouts each week if desired. The key
to success is to make exercise a regular and enjoyable
part of your everyday life.

Fat Burning
To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time.
During the first few minutes of exercise, your body

17
17

SUGGESTED

STRETCHES

The correct form for several basic stretches is shown at the right. Move slowly as you stretch--never

bounce.

1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings,
back of knees and back.
2. Hamstring

Stretch

Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back and groin.
3. Calf/Achilles

Stretch

With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your
back foot flat on the floor. Bend your front leg, lean forward and
move your hips toward the wall. Hold for 15 counts, then relax.
Repeat 3 times for each leg. To cause further stretching of the
achilles tendons, bend your back leg as well. Stretches:
Calves, achilles tendons and ankles.
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as close
to your buttocks as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Quadriceps and hip
muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold
for 15 counts, then relax. Repeat 3 times. Stretches:
Quadriceps and hip muscles.

PART LIST--Model

No. 831.297793

RO299A

To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual.
Key
No,

Qty,

Description

Key
No,

Qty,

Description

Key
No,

Qty,

Description

Motor Belt

Platform Screw

Console Base

2
3
4*
5

1
4
1
3

Pulley/Flywheel/Fan
Motor Nut
Motor/Pulley/Fly./Fan
Incline Motor Bolt

45
46
47
48

4
4
17
1

Isolator
Isolator Screw
Belly Pan Fastener
Console Wire Harness

88
89
90
91

1
4
1
1

Console
Pulse Sensor Plate
Key/Clip
Incline Motor Plate

6
7

1
1

Incline Motor Spacer
Incline Motor

49
50

2
1

Belt Guide
Console Cover

92
93

2
4

Pulse Bar Bolt
Hood Screw

8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38

1
1
2
1
1
1
1
8
16
4
2
2
2
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
7
1
4

Stop Bracket
Small Nut
Star Washer
Optic Switch
Frame
Small Bolt
Incline Optic Disk
Incline Motor Nut
Screw
Plastic Stand-Off
Hood Bracket (short)
Hood Bracket (long)
Warning Decal
Reed Switch
Reed Switch Clip
Motor/Controller Wire
Controller
Electronics Bracket
Circuit Breaker
Power Cord
Power Cord Grommet
On/Off Switch
Inlet Bracket
Incline Leg
Frame Pivot Bolt
Frame Pivot Spacer
Upright Wire Harness
Front Roller Adj. Bolt
Washer
Choke
Motor Bolt

51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81

1
1
2
1
1
2
1
2
2
11
1
3
1
1
2
1
1
2
1
1
1
5
4
1
2
7
1
4
2
4
4

Front Belly Pan
Power Supply
Cable Tie Clamp
Cable Tie
Walking Belt
Roller Guard
Rear Roller
Rear Isolator
Rear Foot
Rear Foot Screw
Ground Wire
Ground Wire Screw
Belly Pan
Rear Endcap
Rear Roller Bolt
Motor
Latch Decal
Rear Platform Screw
Access Plate
Latch Catch
Walking Platform
8" cable Tie
4" cable Tie
Left Handrail
Handrail Endcap
Reed Switch Screw
Storage Latch
Handrail Bolt
Small Upright Plug
Cage Nut
Motor Star Washer

94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
#
#
#
#
#
#
#
#

1
2
1
4
8
1
1
8
1
2
2
1
1
1
1
1
1
2
1
1
4
1
1
1
1
1
1
1
1
1
1

Motor Hood
Front Wheel
Pulse Bar
Base Pad
Console Screw
Wrench Clip
Allen Wrench
Short Screw
Front Roller Adj. Nut
Extension Leg
Extension Leg Cap
Shock
Incline Spacer
Incline Motor Shield
Book Holder
Right Foot Rail Cap
Plastic Shield
Foot Rail Insert
Motor Tension Nut
Motor Tension Bolt
Long Screw
Motor Tension Bushing
Motor Tension Washer
8" Blue Wire, 2 F
4" Blue Wire, 2 F
10" White Wire, 2 F
4" White Wire, M/F
9" Wire Harness
4" Black Wire, 2 F
4" Green Wire
8" Green/Yellow Wire

39
40
41
42
43

4
1
2
1
1

Cap Screw
Left Foot Rail Cap
Foot Rail
Front Roller/Pulley
Magnet

82
83
84
85
86

1
2
2
1
2

Upright
Incline Pivot Bolt
Incline Pivot Washer
Right Handrail
Wheel Bolt

User's Manual

* Includes all parts shown in the box
# These parts are not illustrated

/
/

I/
i

o_
co
oJ
o
CK

,\/
//\\

6
"0

/
/
/

8
_J

i,i

/
/
/

/
/

\
(5)
0")
0
n"

i \'\

_S
/
/
/

'\ ,_ \

The model number and serial number of your PROFORM _"J6si
treadmill are listed on a decal attached to the frame. See the front
cover of this manual to find the location of the decal.

Model No, 831,297793

QUESTIONS?

All replacement parts are available for immediate purchase or
special order when you visit your nearest SEARS Service Center.
To request service or to order parts by telephone, call the toll-free
numbers listed at the left.

If you find that:
• you need help assembling or
operating the PROFORM J6si
treadmill
• a part is missing

When requesting help or service, or ordering parts, please be
prepared to provide the following information:
• The NAME OF THE PRODUCT (PROFORM _ J6si treadmill)

• or you need to schedule repair
service
call our toll-free HELPLINE

• The MODEL NUMBER OF THE PRODUCT (831.297793)
• The KEY NUMBER AND DESCRIPTION OF THE PART (see the
EXPLODED DRAWING and PART LIST included in this manual)

1-800-736-6879
Monday-Saturday, 7 am-7 pm
Central Time (excluding holidays)

REPLACEMENT
PARTS
If parts become worn and need
to be replaced, call the following
toll-free number

1-800-FON-PART
(1-800-366-7278)

FULL 90 DAY WARRANTY
For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this
SEARS TREADMILL EXERCISER, contact the nearest SEARS Service Center throughout the United
States and SEARS will repair or replace the TREADMILL EXERCISER, free of charge.
This warranty does not apply when the TREADMILL EXERCISER is used commercially or for rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
SEARS, ROEBUCK AND CO,, DEPT, 817WA, HOFFMAN ESTATES, IL 60179

Part No. 152906 J00352-C

RO299A

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 22
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 4, 0, 0, 13
Create Date                     : Sun Jul 20 23:56:39 2008
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Proform 831297793 User Manual J6SI EKG Manuals And Guides L0802678

PROFORM Treadmill Manual L0802678 PROFORM Treadmill Owner's Manual, PROFORM Treadmill installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation