Proform 239351 475 E Elliptical Users Manual

2015-04-13

: Proform Proform-239351-475-E-Elliptical-Users-Manual-697135 proform-239351-475-e-elliptical-users-manual-697135 proform pdf

Open the PDF directly: View PDF .
Page Count: 24

Download
Open PDF In Browser	View PDF

Model No. 831.23935.1
Serial No.
Write the serial number in the space
above for reference.

Serial Number Decal

• Assembly
• Operation
• Maintenance
• Part List and Drawing

Sears, Roebuck and Co.
Hoffman Estates, IL 60179

CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.

ELLIPTICAL EXERCISER
User’s Manual

TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
HOW TO USE THE ELLIPTICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
90 DAY FULL WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning
decal(s). If a decal is missing or illegible, call
1-888-533-1333 and request a free replacement
decal. Apply the decal in the location shown.
Note: The decal(s) may not be shown at actual size.

IMPORTANT PRECAUTIONS
WARNING:

To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your elliptical before using your elliptical. Sears
assumes no responsibility for personal injury or property damage sustained by or through the use of
this product.
1. It is the responsibility of the owner to ensure
that all users of the elliptical are adequately
informed of all precautions.

9. The elliptical should not be used by persons
weighing more than 250 lbs. (113 kg).
10. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the elliptical. Always wear athletic
shoes for foot protection while exercising.

2. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons with pre-existing health problems.

11. Hold the handlebars or the upper body arms
when mounting, dismounting, or using the
elliptical.

3. Use the elliptical only as described in this
manual.
4. The elliptical is intended for home use only.
Do not use the elliptical in a commercial,
rental, or institutional setting.

12. The heart rate monitor is not a medical
device. Various factors may affect the accuracy of heart rate readings. The heart rate
monitor is intended only as an exercise aid
in determining heart rate trends in general.

5. Keep the elliptical indoors, away from moisture and dust. Do not put the elliptical in a
garage or covered patio, or near water.

13. The elliptical does not have a freewheel; the
pedals will continue to move until the flywheel stops. Reduce your pedaling speed in
a controlled way.

6. Place the elliptical on a level surface, with at
least 3 ft. (0.9 m) of clearance in the front and
rear of the elliptical and 2 ft. (0.6 m) on each
side. To protect the floor or carpet from damage, place a mat under the elliptical.

14. Keep your back straight while using the elliptical; do not arch your back.

7. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.

15. Over exercising may result in serious injury
or death. If you feel faint, if you become short
of breath, or if you experience pain while
exercising, stop immediately and cool down.

8. Keep children under age 12 and pets away
from the elliptical at all times.

BEFORE YOU BEGIN
Thank you for selecting the revolutionary PROFORM®
475 E elliptical. The 475 E elliptical provides an
impressive selection of features designed to make your
workouts at home more effective and enjoyable.

manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.

For your benefit, read this manual carefully before
you use the elliptical. If you have questions after
reading this manual, please see the back cover of this

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Length: 5 ft. 8 in. (173 cm)
Width: 2 ft. 2 in. (66 cm)
Upper Body Arm
Speaker

Console

Handlebar

Heart Rate Monitor

Accessory Tray

Pedal

Wheel

Roller

Track

Leveling Foot

PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included. If a part is missing, please call 1-888-533-1333.

M8 Washer
(63)–6

M8 x 20mm
Screw (61)–6

M8 x 38mm Bolt
(59)–6

M10 Curved
Washer (62)–2

M6 Bolt Set (67)–2

M4 x 16mm
Screw (56)–4

M10 Locknut
(77)–1

M8 Locknut
(60)–6

M10 Split
Washer (80)–2

M10 Washer
(64)–6

M10 x 20mm
Screw (74)–5

M10 x 39mm Screw (75)–2

M10 x 60mm Bolt (72)–1

M10 x 53mm Screw (73)–1

M10 x 70mm Screw (76)–2

ASSEMBLY
• Assembly requires two persons.

• In addition to the included tool(s), assembly
requires the following tools:

• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.

one Phillips screwdriver
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.

• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 5.
1. Go to www.proformservice.com/registration
on your computer and register your product.

• activates your warranty
• saves you time if you ever need to contact
Customer Care
• allows us to notify you of upgrades and offers
Note: If you do not have Internet access, call
1-888-533-1333 and register your product.

2. With the help of a second person, place some
of the packing materials (not shown) under the
front of the Frame (1). Have the second person hold the Frame to prevent it from tipping
while you complete this step.

Attach the Front Stabilizer (12) to the Frame (1)
with two M10 x 70mm Screws (76).
Remove the packing materials from under the
Frame (1).
12
1

3. With the help of a second person, place some of
the packing materials (not shown) under the rear
of the Frame (1).

Attach the Track (11) to the Frame (1) with four
M10 x 20mm Screws (74), two M10 x 39mm
Screws (75), and six M10 Washers (64) as
shown; start all six Screws, and then tighten
them.

11
64

Remove the packing materials from under the
Frame (1).
75

4. Have a second person hold the Upright (2) near
the Frame (1).

Wire Tie

Locate the wire tie in the Upright (2). Tie the
lower end of the wire tie to the Main Wire (32).
Then, pull the upper end of the wire tie until the
Main Wire is routed through the Upright.
Tip: Secure the Main Wire (32) to the Upright
(2) with the wire tie to prevent it from falling
into the Upright.

Wire
Tie
1

5. Tip: Avoid pinching the Main Wire (32). Slide
the Upright (2) onto the Frame (1).

Attach the Upright (2) with an M10 x 53mm
Screw (73), an M10 x 20mm Screw (74), two
M10 Split Washers (80), and two M10 Curved
Washers (62) as shown; do not fully tighten
the Screws yet.

Avoid pinching
the Main Wire
(32)

Finish attaching the Upright (2) with an M10 x
60mm Bolt (72) and an M10 Locknut (77); do
not fully tighten the Bolt yet. Make sure that
the Locknut is in the hexagonal hole.

2
62
72

Hexagonal Hole
77

62
80

32
1

6. Insert the Upright Axle (18) into the Upright (2)
and center it.

Using a plastic bag to keep your fingers clean,
apply some of the included grease to both ends
of the Upright Axle (18).
Grease

18
2

Grease

7. Identify the Right Upper Body Arm (4) and the
Right Upper Body Leg (5), and orient them as
shown.

Insert the Right Upper Body Arm (4) into the
Right Upper Body Leg (5). Attach the Right
Upper Body Arm with three M8 x 38mm Bolts
(59) and three M8 Locknuts (60); make sure
that the Locknuts are in the hexagonal holes.
Do not fully tighten the Bolts yet.

4
3

Attach the Left Upper Body Arm (3) to the
Left Upper Body Leg (6) in the same way.

Hexagonal
Holes

6
5

8. Slide the Right Upper Body Arm (4) onto the
right side of the Upright Axle (18).

8
3

Slide the Left Upper Body Arm (3) onto the left
side of the Upright Axle (18).
Tighten an M8 x 20mm Screw (61) with an Axle
Cover (44) and an M8 Washer (63) into each
end of the Upright Axle (18) at the same time.

18
44

9. Apply grease to the right Crank Arm (13).

Identify the Right Roller Arm (7) and orient it as
shown.
Attach the Right Roller Arm (7) to the right Crank
Arm (13) with an M8 x 20mm Screw (61), an
Axle Cover (44), and an M8 Washer (63).

Grease

Attach the Left Roller Arm (8) in the same
way.

10. Apply grease to axle on the Right Roller Arm (7).

Then, identify the Right Pedal Arm (9), orient
it as shown, and slide it onto the Right Roller
Arm (7).

Attach the Right Pedal Arm (9) with an M8 x
20mm Screw (61), an Axle Cover (44), and an
M8 Washer (63).
7

Attach the Left Pedal Arm (10) to the Left
Roller Arm (8) in the same way.

Grease
63

11. Apply grease to an M6 Bolt Set (67).

Attach the Right Pedal Arm (9) to the Right
Upper Body Leg (5) with the M6 Bolt Set (67).

6
5

Attach the Left Pedal Arm (10) to the Left
Upper Body Leg (6) in the same way.
10

Grease
9

12. The Console (30) can use four D batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batteries together. IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before inserting
batteries. Otherwise, you may damage the
console displays or other electronic components. Remove the battery covers from the
back of the Console, and insert batteries into the
battery compartments. Make sure to orient the
batteries as shown by the diagrams inside
the battery compartments. Then, reattach the
battery covers.

Battery
Cover
30

Battery
Cover

To purchase an optional power adapter, call
the telephone number on the cover of this
manual. To avoid damaging the console,
use only a manufacturer-supplied regulated
power adapter. Plug one end of the power
adapter into the receptacle inside the battery
compartment on the console; plug the other end
into an outlet installed in accordance with all
local codes and ordinances.

Receptacle

13. Remove and discard the wire tie on the Main
Wire (32).

Have a second person hold the Console (30)
near the Upright (2).

Connect the wires on the Console (30) to the
Main Wire (32) and to the Pulse Wire (31).

Avoid pinching
the wires
31

Insert the excess wire into the Upright (2).

2
56

Tip: Avoid pinching the wires. Attach the
Console (30) to the Upright (2) with four M4 x
16mm Screws (56).
See step 5. Tighten the M10 x 53mm Screw
(73), the M10 x 20mm Screw (74), and the M10
x 60mm Bolt (72).
See step 7. Tighten the M8 x 38mm Bolts (59).

14. Make sure that all parts are properly tightened before you use the elliptical. Note: Extra parts may be
included. Place a mat beneath the elliptical to protect the floor.

HOW TO USE THE ELLIPTICAL
HOW TO MOVE THE ELLIPTICAL

HOW TO EXERCISE ON THE ELLIPTICAL

Due to the size and weight of the elliptical, moving
it requires two persons. Stand in front of the elliptical,
hold the upright, and place one foot against one of the
wheels. Pull on the upright, and have a second person
lift the track until the elliptical will roll on the wheels.
Carefully move the elliptical to the desired location, and
then lower it to the floor.

To mount the elliptical, hold the handlebars or the
upper body arms and step onto the pedal that is in the
lower position. Then, step onto the other pedal. Push
the pedals until they begin to move with a continuous
motion. Note: The pedals can turn in either direction. It is recommended that you turn the pedals
in the direction shown by the arrow; however, for
variety, you can turn the pedals in the opposite
direction.

Pull on the
upright
Upper
Body Arms
Handlebars
Place
your foot
here

Lift
here

Pedals

HOW TO LEVEL THE ELLIPTICAL
If the elliptical rocks
slightly on your
floor during use,
turn one or both
of the leveling feet
beneath the rear of
the frame until the
rocking motion is
eliminated.

To dismount the elliptical, wait until the pedals come to
a complete stop. Note: The elliptical does not have
a free wheel; the pedals will continue to move until
the flywheel stops. When the pedals are stationary,
step off the higher pedal first. Then, step off the lower
pedal.

Leveling
Feet

CONSOLE DIAGRAM

FEATURES OF THE CONSOLE

resistance of the pedals as it guides you through an
effective workout.

The advanced console offers an array of features
designed to make your workouts more effective and
enjoyable.

You can even connect your MP3 player or CD player
to the console sound system and listen to your favorite
music or audio books while you exercise.

When you use the manual mode of the console, you
can change the resistance of the pedals with the touch
of a button.

To use the manual mode, see page 15. To use a
preset workout, see page 16. To use the sound
system, see page 17.

As you exercise, the console will provide continuous
exercise feedback. You can even measure your heart
rate using the handgrip heart rate monitor.

Note: Make sure that batteries are installed in the console (see assembly step 12 on page 11). If there is a
sheet of plastic on the display, remove the plastic.

The console offers a selection of preset workouts.
Each preset workout automatically changes the

HOW TO USE THE MANUAL MODE

Profile—When a workout is selected, this display
mode will show a profile of the resistance settings
of the workout.

1. Turn on the console.

Pulse—This display mode will show your heart rate
when you use the handgrip heart rate monitor (see
step 5).

Press any button or begin pedaling to turn on the
console.
When you turn on the console, the display will turn
on. A tone will sound and the console will be ready
for use.

Resistance (Res)—This display mode will show
the resistance level of the pedals for a few seconds
each time the resistance level changes.

2. Select the manual mode.

Speed—This display mode will show your pedaling
speed in revolutions per minute.

When you turn on the console, the manual mode will
be selected automatically.

Time—When the manual mode is selected, this
display mode will show the elapsed time. When a
workout is selected, this display mode will show the
time remaining in the workout.

If you have selected a
workout, reselect the manual
mode by pressing the Wt.
Loss Workouts button or
the Perform. Workouts button repeatedly until a track
appears in the upper display.

Track—When the manual mode is selected, this
display mode will show a track representing 1/4
mile (400 m). As you exercise, indicators will
appear in succession around the track until the
entire track appears. The track will then disappear
and the indicators will again begin to appear in
succession.

3. Begin pedaling and change the resistance of
the pedals as desired.
As you pedal, change the
resistance of the pedals by
pressing the Resistance
increase and decrease
buttons.

Press the Display Mode
button repeatedly to view the
desired workout information.
When the word SCAN
appears in the display, the
display will show the calories, distance, speed, and
time display modes in a
repeating cycle.

Note: After you press the
buttons, it will take a moment
for the pedals to reach the
selected resistance level.
4. Follow your progress with the display.

To reset the display to zero, press the On/Reset
button.

The display can show the following workout
information:

Change the volume level of the
console by pressing the volume
increase and decrease buttons.

Calories—This display mode will show the approximate number of calories you have burned.
Distance—This display mode will show the distance that you have pedaled in revolutions.

5. Measure your heart rate if desired.

HOW TO USE A PRESET WORKOUT

If there are sheets
of plastic on the
metal contacts
on the handgrip
heart rate monitor,
remove the plastic.
In addition, make
sure that your
Contacts
hands are clean.
To measure your
heart rate, hold the
handgrip heart rate monitor with your palms resting
against the contacts. Avoid moving your hands
or gripping the contacts tightly.

1. Turn on the console.
Press any button or begin pedaling to turn on the
console.
When you turn on the console, the display will turn
on. A tone will sound and the console will be ready
for use.
2. Select a preset workout.
To select a preset workout,
press the Wt. Loss Workouts
button or the Perform.
Workouts button repeatedly until the number of the
desired workout appears in
the lower display.

When your pulse is detected, a heart-shaped
symbol will flash in the display and then your heart
rate will be shown. For the most accurate heart rate
reading, hold the contacts for at least 15 seconds.

Profile

When you select a preset
workout, a profile of the
resistance levels of the
workout will scroll across
the upper display, the duration of the workout will
appear in the center display, and the number of the
workout will appear in the lower display.

If your heart rate is not shown, make sure that your
hands are positioned as described. Be careful not
to move your hands excessively or to squeeze the
contacts tightly. For optimal performance, clean
the contacts using a soft cloth; never use alcohol,
abrasives, or chemicals to clean the contacts.
6. When you are finished exercising, the console
will turn off automatically.

3. Begin pedaling to start the workout.
Each workout is divided into several one-minute
segments. One resistance level is programmed for
each segment. Note: The same resistance level
may be programmed for consecutive segments.

If the pedals do not move for several seconds, a
series of tones will sound, the console will pause,
and the time will flash in the display.
If the pedals do not move for several minutes, the
console will turn off and the display will be reset.

During the workout, the workout profile will show
your progress (see the drawing above). The flashing segment of the profile represents the current
segment of the workout. The height of the flashing
segment indicates the resistance level for the current segment.
At the end of each segment of the workout, a
series of tones will sound and the next segment of
the profile will begin to flash. If a different resistance level is programmed for the next segment,
the resistance level will appear in the display for
a few seconds to alert you. The resistance of the
pedals will then change.

6. When you are finished exercising, the console
will turn off automatically.

If the resistance level for the current segment is too
high or too low, you can manually override the setting by pressing the Resistance buttons. However,
when the current segment ends, the pedals will
automatically adjust to the resistance level for the
next segment.

See step 6 on page 16.
HOW TO USE THE SOUND SYSTEM

If you stop pedaling for several seconds, a series of
tones will sound and the workout will pause.

To play music or audio books through the console
sound system while you exercise, plug a 3.5 mm male
to 3.5 mm male audio cable (not included) into the jack
on the console and into a jack on your MP3 player,
CD player, or other personal audio player; make sure
that the audio cable is fully plugged in. Note: To
purchase an audio cable, see your local electronics
store.

To resume the workout, simply resume pedaling.
The workout will continue until the last segment
of the profile flashes and the last segment of the
workout ends.
4. Follow your progress with the display.
See step 4 on page 15.

Next, press the play button on your
personal audio player. Adjust the volume level using the volume increase
and decrease buttons on the console
or the volume control on your personal audio player.

5. Measure your heart rate if desired.
See step 5 on page 16.

FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, try to correct the interference by one or more of the following measures:
•
•
•
•

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting to
computer or peripheral devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

MAINTENANCE AND TROUBLESHOOTING
Inspect and tighten all parts of the elliptical regularly.
Replace any worn parts immediately.

Next, locate the Reed Switch (33). Turn the Pulley (15)
until a Magnet (65) is aligned with the Reed Switch.

To clean the elliptical, use a damp cloth and a small
amount of mild soap. IMPORTANT: To avoid damage
to the console, keep liquids away from the console
and keep the console out of direct sunlight.
CONSOLE TROUBLESHOOTING
Most console problems are the result of low batteries. To replace the batteries, see assembly step 12 on
page 11.
If the console does not display your heart rate when
you use the handgrip heart rate monitor, see step 5 on
page 17.

15
65

HOW TO LEVEL THE ELLIPTICAL

If the elliptical rocks slightly on your floor during use,
see HOW TO LEVEL THE ELLIPTICAL on page 13.

HOW TO GREASE THE ROLLERS
See the EXPLODED DRAWING near the end of this
manual. If the Rollers (16) squeak when moving on the
Track (11), apply a small amount of the included PTFE
grease to a paper towel. Next, spread a thin layer of
grease evenly along the Track where the Rollers move.
Then, wipe off any excess grease.

Loosen, but do not remove, the indicated M4 x 12mm
Screw (57). Slide the Reed Switch (33) slightly closer
to or away from the Magnet (65), and then retighten
the Screw. Then, rock the Pulley (15) forward and
backward just enough that the Magnet passes the
Reed Switch repeatedly.

HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted.
To adjust the reed
switch, first use a
flat screwdriver and
carefully pry the
Accessory Tray (50)
upward off the Right
and Left Shields
(48, 49).

Repeat these actions until the console displays correct
feedback. When the reed switch is correctly adjusted,
reattach the accessory tray.

48
49

HOW TO ADJUST THE DRIVE BELT

See EXPLODED DRAWING A on page 22. Remove
the M4 x 25mm Screw (68) and the M4 x 16mm
Screws (56) from the Right and Left Shields (48, 49);
make sure to note the location of each screw. Then,
gently remove the Right Shield.

If the pedals slip while you are pedaling, even while
the resistance is adjusted to the highest level, the drive
belt may need to be adjusted.
To adjust the drive
belt, first use a flat
screwdriver and
carefully pry the
Accessory Tray (50)
upward off the Right
and Left Shields
(48, 49).

Locate and loosen the M6 x 20mm Screw (25). Next,
tighten the M10 x 50mm Screw (20) until the Drive Belt
(55) is tight. Then, retighten the M6 x 20mm Screw.

48
49

Next, remove the
M6 Bolt Set (67) from the Right Upper Body Leg (5)
and the Right Pedal Arm (9). Then, gently move the
Right Pedal Arm out of the way.

52, 53

7
9

44
61

Reattach the right shield, the outer and inner crank
covers, the right roller arm, the right pedal arm, and the
accessory tray.

Next, remove the M8 x 20mm Screw (61), the Axle
Cover (44), and the M8 Washer (not shown) from
the Right Roller Arm (7) and the right Crank Arm (not
shown). Gently move the Right Roller Arm out of the
way. Then, use a flat screwdriver and gently remove
the Outer and Inner Crank Covers (52, 53) from the
right Crank Arm.

EXERCISE GUIDELINES
Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.

WARNING:

Before beginning this
or any exercise program, consult your physician. This is especially important for persons
over age 35 or persons with pre-existing
health problems.
The heart rate monitor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.

Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.

These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.

WORKOUT GUIDELINES

EXERCISE INTENSITY

Warming Up—Start with 5 to 10 minutes of stretching and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.

Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.

Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise; never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.
EXERCISE FREQUENCY

To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.

To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exercise, you may complete up to five workouts each week,
if desired. Remember, the key to success is to make
exercise a regular and enjoyable part of your everyday
life.

PART LIST
Key No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
2
4
1
4
1
3
2
1
1
1
1
1
2
1
1
1
1
1
2
1
10
4
2
2
2
2
2
2

Model No. 831.23935.1 R0714A

Description

Key No. Qty.

Frame
Upright
Left Upper Body Arm
Right Upper Body Arm
Right Upper Body Leg
Left Upper Body Leg
Right Roller Arm
Left Roller Arm
Right Pedal Arm
Left Pedal Arm
Track
Front Stabilizer
Crank Arm
Crank
Pulley
Roller
Small Roller Spacer
Upright Axle
Bushing C
M10 x 50mm Screw
Crank Spacer
Pulse Sensor
Eddy Mechanism
Idler
M6 x 20mm Screw
M6 Washer
M6 x 20mm Shoulder Screw
M8 Nut
Resistance Motor
Console
Pulse Wire
Main Wire
Reed Switch/Wire
Bearing
Clamp
Bushing A
Bushing B
Leveling Foot
Foot
Small Round Cap
Foam Grip
Dome Cap
Wheel

44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
*
*
*

6
2
1
1
1
1
1
1
2
2
2
1
10
7
1
6
10
10
2
6
6
2
2
2
1
4
2
1
1
1
5
2
2
1
1
10
2
2
2
–
–
–

Description
Axle Cover
Large Round Cap
Right Pedal
Left Pedal
Right Shield
Left Shield
Accessory Tray
V-clip
Outer Crank Cover
Inner Crank Cover
Angle Cap
Drive Belt
M4 x 16mm Screw
M4 x 12mm Screw
M4 x 12mm Bright Screw
M8 x 38mm Bolt
M8 Locknut
M8 x 20mm Screw
M10 Curved Washer
M8 Washer
M10 Washer
Magnet
5/16" x 25mm Screw
M6 Bolt Set
M4 x 25mm Screw
M8 Split Washer
M5 Bolt Set
Collar
M10 x 60mm Bolt
M10 x 53mm Screw
M10 x 20mm Screw
M10 x 39mm Screw
M10 x 70mm Screw
M10 Locknut
M5 x 10mm Screw
#10 x 14mm Screw
M10 Split Washer
Track Cap
Pedal Arm Cap
Assembly Tool
Grease Packet
User’s Manual

Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. If a part is missing, call 1-888-533-1333. *These parts are not illustrated.

62
80

78
34

36
80
62

21
14

61 13

EXPLODED DRAWING A
Model No. 831.23935.1 R0714A

23
54

61 44
63

21
19

EXPLODED DRAWING B
Model No. 831.23935.1 R0714A

90 DAY FULL WARRANTY
If this Sears Elliptical Exerciser fails due to a defect in material or workmanship within 90 days of the
date of purchase, call 1-800-4-MY-HOME® (1-800-469-4663) to arrange for free repair (or replacement if
repair proves impossible). The frame is warranted for 5 years.
This warranty does not apply when the Elliptical Exerciser is used commercially or for rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179

Part No. 363317 R0714A

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 24
Producer                        : Mac OS X 10.9.4 Quartz PDFContext
Create Date                     : 2014:07:23 21:17:56Z
Modify Date                     : 2014:07:23 21:17:56Z

EXIF Metadata provided by EXIF.tools

Proform 239351 475 E Elliptical Users Manual

Navigation menu

Versions of this User Manual:

Views

Navigation