Proform 285820 225C Stepper Users Manual *285820 152065

Proform-285820-Owner-S-Manual proform-285820-owner-s-manual

831.285820 744d21c2-a3b1-4af4-abea-f21f54ec5de8

831.285820 to the manual 744d21c2-a3b1-4af4-abea-f21f54ec5de8

2015-04-13

: Proform Proform-285820-225C-Stepper-Users-Manual-697275 proform-285820-225c-stepper-users-manual-697275 proform pdf

Open the PDF directly: View PDF .
Page Count: 12

USERÕS MANUAL

CAUTION

Read all precautions and

instructions in this manual

before using this equipment.

Keep this manual for future

reference.

Serial

Number

Decal

Model No. 831.285820

Serial No.

Write the serial number in the

space above for future reference.

SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

HOW TO USE THE STEPPER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

FULL 90 DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precautions before

using the stepper.

1. Read all instructions in this manual before

using the stepper. Use the stepper only as

described.

2. It is the responsibility of the owner to ensure

that all users of the stepper are adequately

informed of all precautions.

3. Use the stepper indoors, away from mois-

ture and dust. Place the stepper on a level

surface, with a mat beneath it to protect the

floor or carpet from damage.

4. Inspect and tighten all parts regularly.

Replace any worn parts immediately.

5. Keep children under the age of 12 and pets

away from the stepper at all times.

6. The stepper should not be used by persons

weighing more than 250 pounds.

7. Wear appropriate clothing when exercising;

do not wear loose clothing that could become

caught on the stepper. Always wear athletic

shoes for foot protection.

8. Always keep your back straight when using

the stepper. Do not arch your back.

9. The resistance cylinders may become hot

after a period of use. Allow the cylinders to

cool before touching them.

10. If you feel pain or dizziness at any time

while exercising, stop immediately and

begin cooling down.

11. The stepper is intended for in-home use

only. Do not use the stepper in a commer-

cial, rental, or institutional setting.

12. The decal shown below has been placed on

the weight bench. If the decal is missing, or

if it is not legible, please call our toll-free

HELPLINE at 1-800-736-6879, Monday

through Saturday, 7 a.m. until 7 p.m. Central

Time, to order a replacement decal. Apply

the replacement decal to the location shown.

WARNING: Before beginning this or any exercise program, consult your physician. This is especial-

ly important for persons over the age of 35 or persons with pre-existing health problems. Read all

instructions before using. SEARS assumes no responsibility for personal injury or property damage

sustained by or through the use of this product.

BEFORE YOU BEGIN

Thank you for selecting the new PROFORM¨225c

stepper. The 225c blends advanced engineering with

contemporary styling to provide you with a low-impact

workout in the convenience and privacy of your own

home.

For your benefit, read this manual carefully before

using the 225c. If you have additional questions,

please call our toll-free HELPLINE at 1-800-736-6879,

Monday through Saturday, 7 a.m. until 7 p.m. Central

Time (excluding holidays). To help us assist you,

please note the product model number and serial

number before calling. The model number is

831.285820. The serial number can be found on a

decal attached to the PROFORM¨225c stepper (see

the front cover of this manual).

M8 Lock Washer (23)Ð2

M10 Locknut (15)Ð8

M10 x 82mm Carriage Bolt (24)Ð2

M4 x 16mm Screw (27)Ñ4

M4 x 10mm Screw (28)Ñ8

M4 x 12mm Console

Screw (22)Ð4

M10 x 40mm Bolt (25)Ð2

M8 x 19mm Button

Head Bolt (21)Ð2

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts used in assembly. The number in parenthesis below each

drawing refers to the key number of the part, from the PART LIST on page 10. The second number refers to the

quantity used in assembly. Note: If a part is not found in the parts bag, check to see if it has been

preassembled.

ASSEMBLY

Place all parts of the stepper in a cleared area and remove the packing materials. Do not dispose of the packing

materials until assembly is completed. Assembly requires the included allen wrench , a phillips

screwdriver , two adjustable wrenches and a rubber mallet .

1. Attach the Stabilizer (8) to the Base (2) with two

M10 x 82mm Carriage Bolts (24) and two M10

Locknuts (15).

Slide the Upright (1) onto the threaded bolts in the

Base (2). Make sure that the Upright is angled in

the direction shown. Attach the Upright with four

M10 Locknuts (15).

2. Refer to drawing 2a. Identify the Right Pedal Leg (7)

and the Left Pedal Leg (6). Note the positions of the

welded tubes and the Magnet (26).

Refer to drawing 2b. Attach a Pedal (11) to each

Pedal Leg (6, 7) with four M4 x 10mm Screws (28).

3. Slide a Metal Cap (30) onto the indicated shaft on

the Base (2). Make sure that the open side of the

Metal Cap is facing the Base.

Next, apply grease to the shaft on the Base (2).

Apply grease to the Pedal Leg Bushings (16) that

are in the Right Pedal Leg (7).

Slide the Right Pedal Leg (7) onto the shaft on the

Base (2). Tap a 3/4Ó Axle Cap (17) onto the shaft.

Repeat this step to attach the Left Pedal Leg (6).

716

Apply Grease

to Shaft

Apply

Grease

6, 7

Tubes

6. Plug the Reed Switch Wire (12) into the socket in

the back of the Console (10). Next, insert the

excess Reed Switch Wire down into the Upright (1).

Attach the Console to the Upright with four M4 x

12mm Console Screws (22). Be careful to avoid

pinching the Reed Switch Wire.

The Console (10) requires two ÒAAÓ batteries (not

included). Alkaline batteries are recommended.

Refer to the inset drawing. To install batteries, first

slide off the battery cover and carefully remove the

battery clip from the Console. Insert two batteries

into the battery clip. Make sure that the negative

ends of the batteries (marked ÒÐÓ) are touching

the springs in the battery clip. Insert the battery

clip into the Console and reattach the battery cover.

Arrow

7. Make sure that all parts are properly tightened before you use the stepper.

4. Apply grease to the lower shafts on the Upright (1).

Slide a Cylinder Spacer (19) and a Resistance

Cylinder (9) onto each of the lower shafts on the

Upright (1). Make sure that the Resistance

Cylinders are turned so the arrows are on the

side shown. Tap a 5/8Ó Axle Cap (18) onto each

shaft.

Attach the lower ends of the Resistance Cylinders

(9) to the brackets on the Right and Left Pedals (6,

7) with the M10 x 40mm Bolts (25) and two M10

Locknuts (15).

5. Insert the Handlebar Bushings (20) into the Right

and Left Handlebars (4, 5). Slide the Handlebar

Bushings and the Handlebars onto the upper shafts

on the Upright (1). While another person holds the

Handlebars, slide the Top Handlebar (3) into the

Right and Left Handlebars. Loosely thread four M4 x

16mm Screws (27) into the Handlebars and the Top

Handlebar. Do not tighten the Screws yet.

Insert the Reed Switch Wire (12) through the Top

Handlebar (3). Attach the Top Handlebar to the

Upright (1) with two M8 x 19mm Button Head Bolts

(21) and two M8 Lock Washers (23).

Tighten the four M4 x 16mm Screws (27).

Cover

Clip

Apply

Grease

Bracket

HOW TO USE THE STEPPER

The innovative console offers a manual mode and

three pacer programs. The pacer programs are

designed to help you achieve your exercise goals by

pacing your exercise. The console also features six

monitor modes that provide continuous exercise feed-

back.

HOW THE PACER PROGRAMS OPERATE

When you use a

pacer program,

two columns of

bars will appear in

the display. The

left column will

show a target

pace, which is

determined by the

program you have

selected; the right

column will show your actual pace. The target pace

will change periodically during the program; as the tar-

get pace changes, simply adjust your pace to keep

both columns at the same height. Important: The tar-

get pace is a goal pace. Your actual pace may be

slower than the target pace, especially during the

first few months of your exercise program. Be

sure to exercise at a pace that is comfortable for

you.

The three graphs on the console show how the target

pace will change during the pacer programs (see the

drawing above). Each graph is divided into ten

columns, and each column represents a two-minute

time period. The bars in each column show what the

target pace will be during that two-minute period. For

example, in the first column of graph 2, there is one

bar. This shows that during the first two minutes of

program 2, the target pace will be 40 repetitions

(steps) per minute (see the scale at the right end of

the graph). In the second column, there are three

bars. This shows that during the second two-minute

period, the target pace will be 60 repetitions per

minute. Each pacer program is twenty minutes long.

DESCRIPTION OF THE MONITOR MODES

The six monitor modes provide continuous exercise

feedback. The modes are described below.

¥ Reps/MinÑThis mode shows your pace, in repeti-

tions (steps) per minute.

¥ TimeÑIf you select one of the three pacer pro-

grams, this mode will count down the time remain-

ing in the program. If you select the manual mode,

this mode will count up the length of time you have

exercised. Note: If you stop exercising for ten sec-

onds or longer, the time mode will pause.

Note: If there is a thin sheet of clear plastic on

the face of the console, remove it.

Target Pace

Actual Pace

¥ DistanceÑThis mode shows the total number of

repetitions (steps) you have completed, up to 999.

The display will then reset to zero and continue

counting.

¥ Fat calories (FAT CALS)ÑThis mode shows the

approximate number of fat calories you have

burned. (See BURNING FAT on page 9 for an

explanation of fat calories.)

¥ Calories (CALS)ÑThis mode shows the approxi-

mate number of calories you have burned. (This

number includes both fat calories and carbohydrate

calories.)

¥ ScanÑThis mode displays the calories, fat calories,

reps/min, time, and distance modes, for five sec-

onds each, in a repeating cycle.

STEP-BY-STEP CONSOLE OPERATION

Before the console can be operated, two ÒAAÓ bat-

teries must be installed. (See assembly step 6 on

page 5 for installation instructions.) Follow the steps

below to operate the console.

Turn on the power

To turn on the

power, press

the on/reset

button or sim-

ply begin

exercising on

the stepper. When the power is turned on, the

entire display will appear for two seconds. The

console will then be ready for use. Note: If batter-

ies were just installed, the power will already be on.

Select one of the three pacer programs or the

manual mode

To select one

of the pacer

programs,

repeatedly

press the pro-

gram button.

The program

indicator will

show which

program you

have selected. To select the manual mode, press

the program button until the program indicator dis-

appears. The programs will be selected in the fol-

lowing order: program 1, program 2 , program 3,

manual mode.

Begin your workout

If you selected

the manual

mode, go to

step 4. If you

selected one of

the pacer pro-

grams, two

columns of

bars will

appear in the

display. The left column will show one bar, show-

ing that the target pace is 40 repetitions per

minute. The right column will show your actual

pace. Adjust your pace until only one bar appears

in the right column. As the program progresses,

the target pace will change periodically; as the tar-

get pace changes, adjust your pace to keep both

columns at the same height. Remember, the tar-

get pace is a goal pace. Your actual pace may

be slower than the target pace, especially dur-

ing the first few months of your exercise pro-

gram. Be sure to exercise at a pace that is

comfortable for you.

Follow your progress with the monitor modes

When the

power is turned

on, the scan

mode will auto-

matically be

selected. One

mode indicator

will show that

the scan mode

is selected, and

a flashing mode indicator will show which mode is

currently displayed. Note: If you select a different

mode, you can select the scan mode again by

repeatedly pressing the mode button.

If desired, you can select the reps/min, time, dis-

tance, fat calories or calories mode for continuous

display. To select one of these modes, repeatedly

press the mode button. The mode indicators will

show which mode is selected. (Make sure that the

scan mode is not selected.)

If desired, the display can be reset by pressing

the on/reset button.

Turn off the power

To turn off the power, simply wait for about six

minutes. If the pedals are not moved and the

console buttons are not pressed for six minutes,

the power will turn off automatically.

Mode Indicators

Actual PaceTarget Pace

Program Indicator

HOW TO EXERCISE ON THE STEPPER

Place the stepper on a level surface and place a mat

under the stepper. (The stepper features precision

hydraulic cylinders. However, there is a possibility of

slight oil leakage due to the nature of hydraulic cylin-

ders.)

Hold the handlebars and step onto the pedals. Begin

stepping, alternately depressing the right and left ped-

als with a smooth, continuous motion. Because the

pedals move independently of each other, you must

maintain a continuous motion or both pedals will sink

to the floor. Change the height of your step or the

stepping pace until you can comfortably maintain a

continuous motion.

As you step, you can exercise your upper leg mus-

cles by keeping your feet flat on the pedals. To focus

on your calf muscles, rise on your toes as you step.

Stand erect or lean forward slightly as you exercise.

Always keeping your back straight in order to avoid

injury.

HOW TO ADJUST THE RESISTANCE

To change the stepping resistance, simply turn the

resistance collars on the upper ends of the Resistance

Cylinders (9) (see the inset drawing). The arrows on

the Resistance Cylinders and the markings on the

resistance collars show which resistance level has

been selected. Make sure that both Resistance

Cylinders are at the same resistance setting.

WARNING: The resistance cylinders become very

hot during use. Touch only the resistance collars

when changing the stepping resistance.

MAINTENANCE AND TROUBLE-SHOOTING

Inspect and tighten all parts each time you use the

stepper. The stepper can be cleaned using a soft cloth

and mild, non-abrasive detergent.

To prevent damage to the

console, use only a

sealed water bottle in the

water bottle holder. In

addition, keep liquid away

from the console, keep

the console out of direct

sunlight, and remove the

batteries when storing the stepper.

REED SWITCH ADJUSTMENT

If the console does not function properly, or if the dis-

play becomes faint, the batteries should be replaced.

See assembly step 6 on page 5.

If the console still

does not function

properly, the Reed

Switch (12) should

be adjusted. Hold

down the Right Pedal

Leg (7) so that the

Magnet (26) is level

with the Reed Switch

(12). Slide the Reed

Switch (12) in or out

slightly. The gap

between the Reed

Switch and the Magnet should be about 1/8Ó. Make

sure that the Magnet will not hit the Reed Switch when

the Right Pedal Leg is moved. Repeat until the con-

sole displays correct feedback.

Resistance

Collar

Water Bottle

Holder

CONDITIONING GUIDELINES

The following guidelines will help you to plan your

exercise program. Remember that proper nutrition

and adequate rest are essential for successful results.

EXERCISE INTENSITY

Whether your goal is to burn fat or to strengthen your

cardiovascular system, the key to achieving the

desired results is to exercise with the proper intensity.

The proper intensity level can be found by using your

heart rate as a guide. The chart below shows recom-

mended heart rates for fat burning, maximum fat

burning, and cardiovascular (aerobic) exercise.

To find the proper heart rate for you, first find your age

on the left side of the chart (ages are rounded off to

the nearest ten years). Next, find the three numbers

to the right of your age. The three numbers are your

Òtraining zone.Ó The lowest number is the recommend-

ed heart rate for fat burning; the middle number is the

heart rate for maximum fat burning; the highest

number is the heart rate for aerobic exercise.

Burning Fat

To burn fat effectively, you must exercise at a rela-

tively low intensity level for a sustained period of time.

During the first few minutes of exercise, your body

uses easily accessible carbohydrate calories for ener-

gy. Only after the first few minutes of exercise does

your body begin to use stored fat calories for energy.

If your goal is to burn fat, adjust the intensity of your

exercise until your heart rate is near the lowest num-

ber in your training zone as you exercise.

For maximum fat burning, adjust the intensity of your

exercise until your heart rate is near the middle num-

ber in your training zone as you exercise.

Aerobic Exercise

If your goal is to strengthen your cardiovascular sys-

tem, your exercise must be Òaerobic.Ó Aerobic exer-

cise is activity that requires large amounts of oxygen

for prolonged periods of time. This increases the

demand on the heart to pump blood to the muscles,

and on the lungs to oxygenate the blood. For aerobic

exercise, adjust the intensity of your exercise until

your heart rate is near the highest number in your

training zone.

HOW TO MEASURE YOUR HEART RATE

To measure your

heart rate, first exer-

cise for at least four

minutes. Then, stop

exercising and place

two fingers on your

wrist as shown. Take

a six-second heart-

beat count, and mul-

tiply the result by 10

to find your heart rate. For example, if your six-second

heartbeat count is 14, your heart rate is 140 beats per

minute. (A six-second count is used because your

heart rate will drop rapidly when you stop exercising.)

WORKOUT GUIDELINES

Each workout should include the following three parts:

A warm-up, consisting of 5 to 10 minutes of stretch-

ing and light exercise. A proper warm-up increases

your body temperature, heart rate, and

circulation in preparation for exercise.

Training zone exercise, consisting of 20 to 30 min-

utes of exercising with your heart rate in your training

zone. (During the first few weeks of your exercise pro-

gram, do not keep your heart rate in your training

zone for longer than 20 minutes.)

WARNING: Before beginning this or any exer-

cise program, consult your physician. This is

especially important for persons over the age

of 35 or persons with pre-existing health

problems.

PART LISTÑModel No. 831.285820 R1298A

Note: Ò#Ó refers to a non-illustrated part. Specifications are subject to change without notice. See the back cover

of this manual for information about ordering replacement parts.

Key No. Qty. Description Key No. Qty. Description

A cool-down, with 5 to 10 minutes of stretching. This

will increase the flexibility of your muscles and will

help to prevent post-exercise problems.

EXERCISE FREQUENCY

To maintain or improve your condition, plan three work-

outs each week, with at least one day of rest between

workouts. After a few months of regular exercise, you

may complete up to five workouts each week, if

desired. Caution: Be sure to progress at your own

pace and avoid overdoing it. Incorrect or excessive

training may result in injury to your health.

Remember, the key to success is make exercise a

regular and enjoyable part of your everyday life.

1 1 Upright

2 1 Base

3 1 Top Handlebar

4 1 Right Handlebar

5 1 Left Handlebar

6 1 Left Pedal Leg

7 1 Right Pedal Leg

8 1 Stabilizer

9 2 Resistance Cylinder w/Bushing

10 1 Console

11 2 Pedal

12 1 Reed Switch w/Wire

13 4 Endcap

14 1 Grommet

15 8 M10 Locknut

16 4 Pedal Leg Bushing

17 2 3/4Ó Axle Cap

18 2 5/8Ó Axle Cap

19 2 Cylinder Spacer

20 2 Handlebar Bushing

21 2 M8 x 19mm Button Head Bolt

22 4 M4 x 12mm Console Screw

23 2 M8 Lock Washer

24 2 M10 x 82mm Carriage Bolt

25 2 M10 x 40mm Bolt

26 1 Magnet w/Holder

27 6 M4 x 16mm Screw

28 8 M4 x 10mm Screw

29 2 Plastic Bumper

30 2 Metal Cap

31 2 Foam Grip

# 1 UserÕs Manual

# 1 Grease Packet

# 1 Allen Wrench

EXPLODED DRAWINGÑModel No. 831.285820 R1298A

17 18

QUESTIONS?

If you find that:

¥ you need help assembling or

operating the PROFORM¨225c

stepper

¥ a part is missing

¥ or you need to schedule repair

service

call our toll-free HELPLINE

1-800-736-6879

MondayÐSaturday, 7 amÐ7 pm

Central Time (excluding holidays)

REPLACEMENT

PARTS

If parts become worn and need to

be replaced, call the following toll-

free number

1-800-FON-PART

(1-800-366-7278)

The model number and serial number of your PROFORM¨225c

stepper are listed on a decal attached to the frame. See the front

cover of this manual to find the location of the decal.

All replacement parts are available for immediate purchase or

special order when you visit your nearest SEARS Service Center.

To request service or to order parts by telephone, call the toll-free

numbers listed at the left.

When requesting help or service, or ordering parts, please be pre-

pared to provide the following information:

¥ The MODEL NUMBER of the product (831.285820).

¥ The NAME of the product (PROFORM¨225c).

¥ The KEY NUMBER and DESCRIPTION of the PART (see the

PART LIST and EXPLODED DRAWING on pages 10 and 11).

FULL 90 DAY WARRANTY

For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this

STEPPER EXERCISER, contact the nearest SEARS Service Center throughout the United States and

SEARS will repair or replace the STEPPER EXERCISER, free of charge.

This warranty does not apply when the STEPPER EXERCISER is used commercially or for rental pur-

poses.

This warranty gives you specific legal rights, and you may also have other rights which vary from state

to state.

SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179

Proform 285820 225C Stepper Users Manual *285820 152065

Proform-285820-Owner-S-Manual proform-285820-owner-s-manual

831.285820 744d21c2-a3b1-4af4-abea-f21f54ec5de8

831.285820 to the manual 744d21c2-a3b1-4af4-abea-f21f54ec5de8

Navigation menu

Versions of this User Manual:

Views

Navigation