Proform Pfvb29070 Vibration Bench Users Manual PFEL39031 208048
Proform-Pfvb29070-Owner-S-Manual proform-pfvb29070-owner-s-manual
2015-04-14
: Proform Proform-Pfvb29070-Vibration-Bench-Users-Manual-702254 proform-pfvb29070-vibration-bench-users-manual-702254 proform pdf
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
Model No. PFVB2907.0 Serial No. Write the serial number in the space above for reference. USER’S MANUAL Serial Number Decal 7 QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE DO NOT CONTACT THE STORE; please contact Customer Care. IMPORTANT: You must note the product model number and serial number (see the drawing above) before contacting us: 1-888-533-1333 CALL TOLL-FREE: Mon.–Fri. 6 a.m.–6 p.m. MST Sat. 8 a.m.–4 p.m. MST ON THE WEB: www.proformservice.com CAUTION Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference. 7 Visit our website at www.proform.com new products, prizes, fitness tips, and much more! TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 HOW TO USE THE VIBRATION PLATFORM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover WARNING DECAL PLACEMENT The warning decal shown here has been applied in the location shown. If the decal is missing or illegible, call the telephone number on the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decal may not be shown at actual size. 7 PROFORM is a registered trademark of ICON IP, Inc. 2 IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your vibration platform before using your vibration platform. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. 12. The following is a list of factors and conditions that may make exercising on the vibration platform inadvisable (this list is not exhaustive; it is intended only for reference). If one or more factors or conditions apply to you, consult your physician before using the vibration platform. • Knee or hip implant • Pacemaker • Recently placed screws, pins, bolts, or spirals • Acute hernia, discopathy, or spondylitis • Serious heart or vascular disease • Acute thrombosis • Tumor • Serious migraine • Epilepsy • Serious diabetes • Recent wound due to operation • Fresh inflammation • Pregnancy 2. It is the responsibility of the owner to ensure that all users of the vibration platform are adequately informed of all precautions. 3. Your vibration platform is intended for home use only. Do not use your vibration platform in a commercial, rental, or institutional setting. 4. Keep your vibration platform indoors, away from moisture and dust. Place your vibration platform on a level surface, with a mat beneath it to protect the floor or carpet. Do not place the vibration platform in a garage or covered patio, or near water. 5. Inspect and properly tighten all parts regularly. Replace any worn parts immediately. 13. If you feel pain or dizziness while exercising, stop immediately and cool down. 6. Keep children under age 12 and pets away from your vibration platform at all times. 14. Use your vibration platform only as described in this manual. 7. Your vibration platform should not be used by persons weighing more than 250 lbs. (113 kg). 15. When connecting the power cord, follow the instructions on page 7. 8. Never allow more than one person on the vibration platform at a time. 16. Do not modify the power cord or use an adapter to connect the power cord to an improper receptacle. Keep the power cord away from heated surfaces. 9. Keep your back straight while using your vibration platform; do not arch your back. When standing on the vibration platform, bend your knees slightly and balance your weight on the balls of your feet. 17. Never leave the vibration platform unattended while it is running. 18. 10. It is recommended that you use the vibration platform no more than 15 minutes per day and no more than 3 times per week. 11. Be careful when stepping down from the vibration platform; your muscles will feel different after you exercise on the vibration platform. 3 DANGER: Always unplug the power cord when the vibration platform is not in use and before cleaning the vibration platform. Servicing other than the procedures in this manual should be performed by an authorized service representative only. BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM® BIOVIBE vibration platform. The vibration platform offers whole body vibration options that will make your workouts effective and enjoyable. serial number decal are shown on the front cover of this manual. To avoid a registration fee for any service needed under warranty, you must register the vibration platform at www.proformservice.com/registration. For your benefit, read this manual carefully before you use the vibration platform. If you have questions after reading this manual, please see the front cover of this manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the Before reading further, please familiarize yourself with the parts that are labeled in the drawing below. Right Handlebar Left Handlebar Control Front Post Handlebar Frame Mat Knob 7 Adapter 4 Casing ASSEMBLY Place all parts of the vibration platform in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. 1. Lift the Handlebar Frame (28) and the Front Post (26) to the position shown. Attach the Handlebar Frame to the Bottom Frame (18) with the two M8 Knobs (27). Then, insert the Control (54) into the Control Holder (32). 1 54 32 26 28 27 27 18 7 2. Attach the Left Handlebar (36) to the Handlebar Frame (28) with two M8 x 16mm Screws (6) and two M8 Arc Washers (31). 2 Attach the Right Handlebar (37) to the Handlebar Frame (28) in the same way. 36 6 5 37 31 31 28 3. Plug the Adapter (24) into the indicated jack. 3 Make sure that all parts of the vibration platform are properly tightened. 24 Jack 7 MAINTENANCE Make sure that all parts are properly tightened each time you use the vibration platform. Replace any worn parts immediately. Outer surfaces of the vibration platform can be cleaned with a damp cloth and a mild, non-abrasive detergent; do not use solvents to clean the vibration platform. STORING THE VIBRATION PLATFORM To store the vibration platform, unplug the Adapter (not shown). Next, remove the two M8 Knobs (27) from the Handlebar Frame (28). Then, lower the Handlebar Frame and the Front Post (26). 26 28 27 27 7 6 HOW TO USE THE VIBRATION PLATFORM DIAGRAM OF THE CONTROL other end of the adapter into an appropriate outlet that is properly installed in accordance with all local codes and ordinances. HOW TO TURN ON THE POWER A B C D E IMPORTANT: If the vibration platform has been exposed to cold temperatures, allow it to warm to room temperature before turning on the power. If you do not do this, the electronic components may become damaged. Plug in the adapter as described above. Next, press the On/Off button on the control. The power indicator will light and the vibration platform will begin to vibrate. Note: The vibration platform will automatically turn off after 10 minutes. HOW TO CHANGE THE VIBRATION FREQUENCY F When the power is turned on, the lowest vibration frequency will be selected and the lowest frequency indicator will light. If a different vibration frequency is desired, press the High or Low button repeatedly until the desired vibration frequency indicator lights. HOW TO USE THE AUTO MODES Press the Auto button repeatedly to select one of the three auto modes. The Auto indicator will light to show which auto mode is selected. When the first mode is selected, the third, fourth, and fifth vibration frequencies will be selected in a repetitive sequence. A. On/Off Button—This button turns the power on and off. B. Power Indicator—This indicator lights when the power is on. When the second mode is selected, the first, second, third, fourth, and fifth vibration frequencies will be selected in a repetitive sequence. C. Auto Button—This button selects the three auto modes that automatically change the vibration frequency. When the third mode is selected, the second, third, and fourth vibration frequencies will be selected in a repetitive sequence. D. Auto Indicator—This indicator shows which auto mode is selected. HOW TO TURN OFF THE POWER E. Frequency Indicators—These indicators show which of the five vibration frequencies is selected. F. High and Low Buttons—These buttons increase and decrease the vibration frequency. To turn off the power, press the On/Off button. The power indicator will darken. Unplug the adapter when the vibration platform is not in use. Plug one end of the included adapter into the vibration platform (see assembly step 3 on page 6). Plug the If the control does not function properly, make sure that the adapter is fully plugged into a 120-volt outlet. HOW TO PLUG IN THE ADAPTER CONTROL TROUBLESHOOTING 7 NOTES 8 NOTES 9 PART LIST—Model No. PFVB2907.0 Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 1 4 13 10 1 12 12 4 1 18 2 2 4 1 1 4 1 1 6 2 1 3 1 1 2 1 2 1 Description Mat M8 x 60mm Bolt M8 Spring Washer M8 Flat Washer Casing M8 x 16mm Screw M4.2 x 13mm Self-tapping Screw Cable Tie Vibration Frame M4.2 x 16mm Self-tapping Screw Flat Block Bushing M8 Nylon Locknut Motor Cover Motor Damping Mat 13mm x 12mm Endcap Bottom Frame Small Foot M6 x 12mm Screw Bottom Cover M2.2 x 6.5mm Self-tapping Screw Connector Board Adapter Upright Endcap Front Post M8 Knob Handlebar Frame Key No. Qty. 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 * * 2 2 4 1 2 1 2 1 1 2 1 1 1 1 – – – – – – 1 1 1 4 1 1 – – Description R1107A Handlebar Frame Cover M8 x 25mm Screw M8 Arc Washer Control Holder M3.5 x 32mm Self-tapping Screw Motor Pad Handlebar Cover Left Handlebar Right Handlebar Handlebar Endcap Motor Base Front Post Cover M8 Nut Front Post Pad (not used) (not used) (not used) (not used) (not used) (not used) Control Cord Pad Front Post Endcap M8 x 60mm Bolt Casing Pad Front Post Clamp Control User’s Manual Tool Note: Specifications are subject to change without notice. See the back cover of this manual for information about ordering replacement parts. *These parts are not illustrated. 10 EXPLODED DRAWING—Model No. PFVB2907.0 38 1 38 54 35 5 6 29 31 10 31 27 25 25 24 40 21 50 51 4 19 10 11 19 10 15 39 20 7 7 4 3 7 13 14 11 4 3 13 16 16 18 7 3 6 3 19 10 3 6 10 20 7 4 3 41 16 8 7 11 22 10 8 7 8 23 26 28 27 53 17 10 34 30 12 12 29 42 32 6 3 6 3 9 49 4 4 36 33 10 2 2 37 6 52 52 35 31 R1107A 6 19 10 10 19 6 3 10 ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) • the name of the product (see the front cover of this manual) • the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING near the end of this manual) LIMITED WARRANTY ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for which warranty claims are made must be pre-authorized by ICON. If the product is shipped to a service center, freight charges to and from the service center will be the customer’s responsibility. For in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON authorized service center; products used for commercial or rental purposes; or products used as store display models. No other warranty beyond that specifically set forth above is authorized by ICON. ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you. The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state. ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813 Part No. 260571 R1107A Printed in China © 2007 ICON IP, Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No XMP Toolkit : 3.1-701 Create Date : 2007:11:09 12:28:46Z Creator Tool : QuarkXPress(tm) 6.5 Modify Date : 2007:11:09 12:29:54-07:00 Metadata Date : 2007:11:09 12:29:54-07:00 Producer : QuarkXPress(tm) 6.5 X Press Private : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%DocumentCustomColors: (PANTONE Cool Gray 7 C).%%+ (PANTONE 368 C).%%CMYKCustomColor: 0 0 0 .37 (PANTONE Cool Gray 7 C).%%+ .57 0 1 0 (PANTONE 368 C).%%EndComments Format : application/pdf Title : PFEL39031-208048 Document ID : uuid:26233236-8efa-11dc-9475-0017f2050332 Instance ID : uuid:26233fda-8efa-11dc-9475-0017f2050332 Page Count : 12 Creator : QuarkXPress(tm) 6.5EXIF Metadata provided by EXIF.tools