Pronto Networks PN-CPP-A-1422 802.11 b/g Wireless Router User Manual

Pronto Networks, Inc 802.11 b/g Wireless Router

Contents

User Manual 3 of 3

Schedule Rules
To do New Scheduler Entry
In the button line,
a New Time Segment Entry shall be entry
to enter New… again to do Hour Range Edit
Firmware upgrade /
Now the service has not on going. So upgrade firmware from Internet is
unavailable.
But you can upgrade it from Computer by Wired, Ethernet. Please do not
use wireless LAN to do upgrading processing!
Universal Plug and Play
System settings
MAC cloning
You can hide your true MAC address in the WAN side to the NET, press
Clone My MAC Address, it will be changeable to what’s your type in.
(CAUTION: Some NET application environment is required your true
MAC or your networking will be unstable or unusable.)
Diagnostics
Remote Administration
File server
Printer server
Restore defaults
Restart
Technical information
3-7. SYSTEM Monitoring ITEM
3-8. Logout ITEM
If you press item Logout, you will be logout directly. And the window
will show that.
Warring notice:
Our Products are followed CE and FCC regulation by Laws or
requirement in rules by local country Government.
Please use this product in normal condition.
AVOID water or liquid and other (unmoral vapor, solid something) in or
into or on product.
AVOID steam into product.
Be careful Product where the place is. Considering that to keep off
“Fire accident”, especially the Power Adapter.
Keep product in adequately ventilated condition in operating.
Tested to comply with FCC standards.
For Home or Office use.
FCC Caution
1. The device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference
that may cause undesired operation.
2. FCC RF Radiation Exposure Statement: The equipment complies with
FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance
of 20 centimeters between the radiator and your body.
3. This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
4. Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user authority to operate the
equipment.
FCC statement in User's Manual (for class B)
"Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.

Navigation menu