Proscan 19LB30QD User Manual LCD TELEVISION/DVD Manuals And Guides L0807673

PROSCAN TV/VCR or DVD Combo Manual L0807673 PROSCAN TV/VCR or DVD Combo Owner's Manual, PROSCAN TV/VCR or DVD Combo installation guides

User Manual: Proscan 19LB30QD 19LB30QD PROSCAN LCD TELEVISION/DVD - Manuals and Guides View the owners manual for your PROSCAN LCD TELEVISION/DVD #19LB30QD. Home:Electronics Parts:Proscan Parts:Proscan LCD TELEVISION/DVD Manual

Open the PDF directly: View PDF .
Page Count: 120

Download
Open PDF In Browser	View PDF

PRO

CAN *

Model: 19LB30QD

CAUTION:

To reduce the risk of eFectric shock,
do no_ remove cover or back.
No user- serviceabJe
Refer Servicing
personnel.

CAUTION:

Changes

parts inside.

to quaJified

or modifications

expressly

approved

responsible

service

not

by the party

for compliance

with the

FCC Rules could avoid the users'
authority

CAUTION:

The monitor
dripping
filled

this equipment.

shall not be exposed

or splashing.

with liquids,

be placed

CAUTION:

to operate

No objects

such as vases,

shall

on the Monitor

Do Not Place This TV on an
Unstable

cart,

stand,

TV may fall, causing
to a child or adult,

or table.
serious

The
injury

and serious

damage

to the TV. Use only with a cart or stand
recommended

by the manufacturer,

sold with the TV

CAUTION:

Installation
UL safety

on concrete
test.

wall

has passed

WARNING: TO REDUCE THE RISK OF FIRE OF ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE

TO RAIN OR MOISTURE. DANGEROUS

INSIDE THE ENCLOSURE.DO
QUALIFIED

PERSONNEL

WARNING: THE APPARATUS
SPLASHING

HIGH VOLTAGES ARE PRESENT

NOT OPEN THE CABINET. REFER SERVICING TO

ONLY.

SHALL NOT BE EXPOSED TO DRIPPING OR

AND THAT NO OBJECTS

FILLED WITH LIQUIDS,

SUCH AS VASES SHALL BE PLACED ON THE APPARATUS.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT.

CAUTION: THESE SERVICING INSTRUCTIONS

ARE FOR USE BY QUALIFIED SERVICE

PERSONNELONLY.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT PERFORM ANY SERVICING
ACTIVITIES,

BUT CALL QUALIFIED ELECTRICIAN

PERSONNEL.

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
WITH THE SAME OF EQUIVALENT

TYPE

REPLACED, PERLACE ONLY

READ THESE INSTRUCTIONS

CONVENIENCE

KEEP THESE INSTRUCTIONS

WHERE THEY EXIT FROM THE APPARATUS.

HEED ALL WARNINGS

DO NOT USE THIS APPARATUS

11.

ALL INSTRUCTIONS

AND THE POINT

ONLY USE ATTACHMENTS/ACCESSORIES

SPECIFIED

BY THE MANUFACTURER.
NEAR

12.

WATER

RECEPTACLES,

USE ONLY WITH CART, STAND, TRIPOD, BRACKET,
TABLE SPECIFIED

BY THE MANUFACTURER,

Do not use this TV near water. For example, do not use near

WITH THE APPARATUS.

a bathtub, washbowl,

CAUTION

kitchen sink or laundry tub, in a wet

OR SOLD

WHEN A CART IS USED, USE

WHEN MOVING THE CART/

basement, or near a swimming pool, and the like. The TV set

APPARATUS

shall not be exposed to dripping or splashing.

INJURY FROM TIP-OVER.

No objects

COMBINATION

TO AVOID

filled with liquids, such as vases, shall be placed on the TV

Do not place this TV on an unstable cart, stand, tripod,

(_ttEAN ONLY WITH DRY CLOTH

bracket, or table. The TV may fall, causing serious injury to
someone, and serious damage to the appliance.

A TV and

Unplug the TV from the wall outlet before cleaning. Do
cart combination

should be moved with care. Quick stops,

not use liquid cleaners or aerosol cleaners. Use a
excessive force, and uneven surfaces may cause the TV and
damp cloth for cleaning.
7.

DO NOT BLOCK

cart combination

ANY VENTILATION

13.
INSTALL

IN ACCORDANCE

to overturn.

OPENINGS.
UNPLUG THIS APPARATUS

DURING LIGHTNING

WITH THE
STORMS OR WHEN UNUSED FOR LONG PERIODS

MANUFACTURER'S

INSTRUCTIONS.
OF TIME.

Slots and openings in the cabinet back or bottom are
For added Protection for this TV receiver during a lightning
provided for ventilation,

to ensure reliable operation of the TV
storm, or when it is left unattended and unused for long

and to protect it from overheating.

These openings must not
period of time, unplug it from the wall outlet and disconnect

be blocked or covered. The openings should never be
the antenna or cable system. This will prevent damage to the
blocked by placing the TV on a bed, sofa, rug, or other
TV due to Lightning and power line surges.
similar surface. This TV should never be placed near or over
a radiator or heat resource. This TV should not be placed in a

14.

built-in installation such as a bookcase or rack unless proper
ventilation

is provided or the manufacturer's

instructions

REFER ALL SERVICING
PERSONNEL.

SERVICING

APPARATUS

HAS BEEN DAMAGED

AS POWER-SUPPLY

have been adhered to.

TO QUALIFIED
IS REQUIRED

DO NOT INSTALL

NEAR ANY HEAT SOURCES

HEAT REGISTERS,

APPARATUS

(INCLUDE AMPLIFIERS)

IN ANY WAY, SUCH

OR OBJECTS

HAVE

SUCH AS
FALLEN INTO THE APPARATUS,

RADIATORS,

WHEN THE

CORD OR PLUG IS DAMAGED,

LIQUID HAS BEEN SPILLED
8.

SERVICE

STOVES, OR OTHER

BEEN EXPOSED

THAT PRODUCE

OPERATE

THE APPARATUS

TO RAIN OR MOISTURE,

NORMALLY,

HAS

DOES NOT

OR HAS BEEN DROPPED.

HEAT.
15.
9.

DO NOT DEFEAT THE SAFETY

Wet Location

Marking -CANADA

PURPOSE OF THE
Worded: The TV shall not be exposed to dripping or splashing.

GROUNDING-TYPE

PLUG. A GROUNDING

TYPE PLUG

HAS TWO BLADES

AND A THIRD GROUNDING

No objects filled with liquids, such as vases, shall
PRONG.
be placed on the TV.
THE THIRD PRONG IS PROVIDED

FOR YOUR SAFETY.
Note: All figures in the manual are for reference only, please

IF THE PROVIDED

PLUG DOES NOT FIT INTO YOUR

OUTLET, CONSULT

AN ELECTRICIAN

refer to the actual units to determine their

FOR
appearance.

REPLACEMENT
10.

OF THE OBSOLETE

OUTLET.

PROTECT THE POWER CORD FROM BEING WALKED
ON OR PINCHED

PARTICULARLY

AT PLUGS,

The front of the display
specially

treated.

Wipe the panel surface

using only a cleaning

of the same type, until the surface

panel has been
gently

Do not scratch or hit the surface

cloth or a soft, lint-free

fingernails

cloth.
If the surface

is particularly

cloth in a weak detergent

with volatile

sprays,

solvents

Welcome

substances

Furthermore,

avoid

such as insect

dirty, soak a soft, lint-free
solution

and thinner;

otherwise,

the quality

and then remove

liquid. Use this cloth to wipe the surface

the display

of the panel with

or other hard objects.

contact

of the surface
excess

is dry.

may be adversely

affected.

panel, and then wipe it with a dry cloth,

to the bright

and vivid world

enjoyment

from your new select.

To obtain

maximum

retain them together

benefit from
with purchase

of Proscan

your set. Please

TV set. We hope that you will have

read this manual

before

receipt for future reference,

Please read all the safety and operating

instructions

carefully

before

begin.

making

many years

any adjustments

and

CAUTION

AND WARNING .............................................................................

IMPORTANT
CLEANING

SAFTY INSTRUCTIONS
AND MAINTENANCE

DEAR PROSCAN

CUSTOMER

SAFETY PRECAUTIONS

.............................................................

1
3

...................................................................

.......................................................................

...............................................................................

INSTALLATION ...............................................................................................................

Preparation

for using your new TV ....................................................................................

FRONT PANEL ............................................................................................................
REAR PANEL ...............................................................................................................
CONNECTIONS AND EXTERNAL INPUT SETTINGS .........................................................

Using the Remote control ............................................................................

8
9
10

LEARNING ABOUT REMOTE CONTROL ........................................................................

REMOTE CONTROL INSTRUCTIONS ..............................................................................

Basic operation ..........................................................................................

TURNING ON AND OFF THE TV ....................................................................................

CHOOSING TV CHANNEL ............................................................................................

SELECTING

INPUT SOURCE ........................................................................................

VOLUME ADJUSTMENT. ................................................................................................................

Setup menu operation .................................................................................

ADJUST THE OSD SCREEN .........................................................................................

SELECT ON SCREEN LANGUAGE ...............................................................................

PICTURE MENU OPTIONS ..........................................................................................

AUDIO MENU OPTIONS ..............................................................................................

SETUP MENU OPTIONS ...............................................................................................

FEATURE MENU OPTIONS ..........................................................................................

VGA MENU OPTIONS ..................................................................................................

YPBPR MENU OPTIONS .............................................................................................

HDMI MENU OPTIONS ................................................................................................

THE DVD PLAYER ......................................................................................................

APPENDIX-TROUBLE

SHOOTING .................................................................

Wall Mounting Specification ........................................................................................

Universal Remote Controlk Code List ...........................................................................

TV Specification ........................................................................................................

Safety Precautions

,_WARNING
KEEP UNNEEDED

SMALL PARTS AND OTHER OBJECTS OUT OF THE REACH OF

SMALL CHILDREN.

THESE OBJECTS CAN BE ACCIDENTALLY

BE CAREFUL ABOUT PACKAGING

SWALLOWED.

ALSO,

MATERIALS AND PLASTIC SHEETS.

Set up
Do not place the TV set on sloped or unstable surfaces.
Do not place any objects on top of the TV set. If water spills onto the TV set or foreign objects get inside it,
short-circuiting

may occur which could result in fire or electric shock. If any foreign objects get inside the TV set,

please consult an Authorized
Do not cover the ventilation

Service Center.
holes. Doing so may cause the TV set overheated and can cause fire or damage to the

TV set.
Avoid installing this product near electronic equipment
It may cause interference

that is readily affected by electromagnetic

waves.

in image, sound, etc. In particular, keep video equipment away from this

product.

AC Power Supply Cord
Securely insert the power cord plug as far as it will go. If the plug is not fully inserted, heat may be generated which
could cause fire. If the plug is damaged or the wall socket plate is loose, they should not be used.
Do not handle the power cord plug with wet hands. Doing so may cause electric shocks.
Do not do anything that might damage the power cable. When disconnecting

the power cable, hold the plug, not the

cable.
Do not make any modifications

to, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull

the power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage
to the cable is suspected,

have it repaired at an Authorized

Service Center.

If the TV set will not be used for a long period of time, unplug the power cord from the wall outlet.

If Problems

Occur During Use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the TV set,
unplug the power cord immediately.

Continued

use of the TV under these conditions might cause fire or permanent

damage to the unit. Have the TV evaluated at an Authorized

Service Center. Service to the TV by any unauthorized

personnel is strongly discouraged due to its high voltage dangerous

nature. If water or foreign objects get inside the

TV set, if the TV set is dropped, or if the cabinet becomes damaged, disconnect
Contact an Authorized

Service Center for any repairs that need to be made

the power cord plug immediately.

Safety Precautions
When using the TV set
Do not bring your hands, face or objects close to the ventilation holes of the TV set. Top of the TV set is usually
very hot due to the high temperature

of exhaust air being released through the Ventilation

holes. Burns or personal

injuries can happen if any body parts are brought too close. Placing any object near the top of the TV could also
result in heat damage to the object as well as to the TV if its ventilation
Be sure to disconnect

holes are blocked.

all cables before moving the TV set. Moving the TV with its cables attached might damage

the cables which, in turn, can cause fire or electric shock.
Disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning.
electric shocks can result if this is not done.
Clean the power cable regularly to prevent it from becoming dusty. Built-up dust on the power cord plug can
increase humidity which might damage the insulation and cause fire. Unplug the cord from the wall outlet and
clean it with a dry cloth.
This TV set radiates infrared rays; therefore,

it may affect other infrared communication

equipment.

Install your

infrared sensor in a place away from direct or reflected light from your TV set.

Selecting

a location for the TV

Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen.

Place the TV far enough from the walls to allow proper ventilation.

overheating,

may cause

which may damage the TV.

Note: Please contact

Optional

Inadequate ventilation

local dealer for wall mounting.

External

For best performance,

Equipment

video cables should utilize 75 ohm coaxial shielded wire. Cables are available from your

dealer or electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors
components

require. Also determine the length of cable you will need.

your various

Preparation for using your new TV

Familiarizing

Yourself

with the Main Hardware

(The picture of the product may vary depending

on the model)

b cde

f g

TV buttons:
a.

Select signal input. (It changes to "ENTER" function when main menu displays )

Main Menu display and menu selection

Channel up

Channel down

Volume up

Volume down

POWER ON/OFF button

DVD buttons:
A.

STOP button

STEP button

EJECT button

ZOOM: Zoom the size of the screen

PREV button in DVD mode

NEXT button in DVD mode

Preparation for using your new TV

Rear panel
(The

picture

of' the

product

may w_ry

depending

the

model)

A
B
C
O
E
F
G
H

J
K
L
M

HDMI Input
-

S-Video Input

Input :J

Component

Input 1

Video: E, F, G

Audio:

Composite

C, D

Input

Video: L

Audio : C,D

Video

Audio

C,D

VGA input
-

Video

Audio

H (3.5m plug)

Others
Power Input: A
Earphone out: B
External Antenna: M

Preparation for using your new TV

1: Checking

Items before Connecting

Please check the list below before

connecting

< Check

items before

Check the instruction
buttons
1

connecting.
manual

when connecting

the product

external

to other devices.

devices.

External

products

sometimes

have different

and locations.

Do not connect

the power unless every connection

is well connected.

The product

may be damaged

turned
on while still in the process
2

Connect

Check the terminals

the left (white) and right (red) cables correctly

2: Connecting
There are internal
< Connecting

of being connected.

to connect the product

to the sound cable.

to on the rear panel.

an Antenna
and external

types of antenna.

an Antenna>

The rear of LCDTV

Cable TV network

Use a coaxial

cable to connect

mount or external
2

the rear panel of the TV's [AIR] or [CABLE]

terminals

and the wall

antenna.

When an Air signal is required,

connect

to the [AIR] terminal.

If a Cable signal is required,

connect

the
[CABLE]

terminal.

If both Air and Cable are available,

and then connect

both [AIR] and [CABLE]

terminals.
3

Connect the TV power cord when connecting

< Caution

everything

else.

Avoid bending

the copper

tip at the center of the coaxial

cable.

Using the remote control

1.
2.

POWER:Power
MUTE:Press

on/off

to temporarily

switch the sound

off.
3.

Numeric

Buttons:Press

to change the channel

directly using the numeric buttons.
4.

-/--:When

selecting

a digital broadcast

channel,

press the number, followed by "-" button, followed by
sub channel number.
5.

RECALL:Press

to select between current channel

and the last channel.
6.

Volume

+:Press

to increase

or decrease

the

volume.
7.

RMODE:Change

following:User-

8. Channel+:Channel
9.

Volume

the

picture

Standard-Mild-Vivid-

effect

Hi-bright

up button

-:Press

to increase

or decrease

the

volume.
10. S.MODE: Change the sound effect as following:
Standard-POP-Rock-News
11. Channel1 .Push the back of the remote

ensuring

the correct

polarity (+/-).3.Close

Inserting

Caution:

Use only Alkaline

If the remote

Are the polarities

of the batteries

•

Are the batteries

worn out?

•

Is there an AC power failure?

•

Is the power cable plugged

•

Is any special fluorescent

Use the Remote

Reception

Change

both batteries

should

see the checkpoints

below.

(+, -) correct?

in?

Angle>

control within

batteries

the lid.

or neon sign board turned on?

Remote

Caution-Used

two

the batteries

control is not working,

Control

slightly.2.1nsert

Batteries.

•

< Remote

control and pull forward

a range of 7~10m

Control

and at an angle of 30 °

to either side of the receiver.

TV Ang|e

be recycled and kept out of children's

reach.-Do

NOT use new and old batteries

together.

at the same time.

-When not using the remote

control over a long time, remove

the batteries

from the unit. Use only Alkaline

batteries

Basic operation

TURN ON LCD TV
1.

Connecting to the AC input cable to switch on LCD TV. At this time the TV will enter standby mode and indicator show
red.

User POWER button or

button on the remote control can turn on LCD TV from standby mode.

TURN OFF LCD TV

Press

POWER

Wait 5 second

button or

button on the remote control to enter standby

mode. The indicator is red.

after switch off LCD TV then you can turn on LCD TV again.

Using the OH A / CH T on the front panel or on the remote control.
•

Press CH ,= to increase channel number.

•

Press CH v

to decrease channel number.

Using 0-9 digital buttons

and - button

You can select the channel number by pressing 0 to 9
3.

Example:
IN ANALOG SIGNAL:
To select channel (e.g. Channel 22): Press 2 -> 2 ->ENTER,It will jump to 22-0 directly
IN DIGITAL SIGNAL:
To select digit channel (e.g. Channel 22-1 ): Press 2 -> 2 -> - > 1 ->ENTER,the
NOTE: Sub channel number

of analog

channel is always

physical channel number and not end with "ENTER",

program will appear immediately

zero. But when you in the digital signal, if you enter

channel selection will be made if there is no operation within

a few seconds.

Basic operation

You can select the input source by pressing the INPUT on the remote control or on the front panel.

INPUT

Press VOL+/- to adjust the volume.

If you want to switch the sound OFF, press the MUTE, will turn on CC display at the same time.

You can cancel this function by pressing MUTE or VOL+

Setup menu operation

Press the MENU button to display the main menu.
Use <

/ D. / A / v

buttons to select and adjust the available menus.

NOTE:

The

OSD

(On

Screen

Display)

function

enables

you

adjust

the

screen

status

conveniently
since it provides

graphical presentation.

Setup menu operation

NOTE: If you use your LCD TV for the first time, you should select the language
for displaying

which

will be used

menus and indications

•

Press MENU to display the main menu.

•

Press A / v repeatedly to select the SETUP MENU.

•

Use <

/ _ and •

/ T to select MENU LANGUAGE.

Press ENTER button to select your desired language.

NOTE: In this manual, the OSD (On Screen Display) may be different from your TV's in colors.

Press the MENU on the front panel or on the remote control and then use A / T to select the PICTURE menu.

Use A / v

to select what you want to adjust in the PICTURE MODE.

Press ENTER button to adjust.

When you are satisfied with your adjustment. Press MENU to exit the main menu.

Picture Mode
Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in PICTURE menu.
You may select the picture mode directly by pressing the PICTURE button on the remote control.

Setup menu operation
Contrast
Press ENTER button to select it and then use _

/ _ to adjust the contrast of picture.

Brightness
Press ENTER button to select it and then use <

/ k, to adjust the brightness of picture.

Sharpness
Press ENTER button to select it and then use <

/ _, to adjust the sharpness level of picture.

Color
Press ENTER button to select it and then use ,_ / _. to adjust the color saturation

Tint ( NTSC Input only)
Press ENTER button to select it and then use <

Aspect

/ D. to adjust the tint of picture

Ratio

Press ENTER button to select the ratio of picture display such as Normal/Zoom/Wide

Press MENU on the front panel or on the remote

and Cinema.

control and then use A / T to select the AUDIO menu.

Use A / T to select what you want to adjust in the AUDIO menu.

Press ENTER button to select it and then use ,i. / _, to adjust

When you are satisfied with your adjustment,

press MENU to exit the main menu.

Audio Mode
You can select the type of sound which best corresponds to your listening requirements

by selecting sound in SOUND menu.

You may select the sound mode directly by pressing the SOUND button on the remote control.

Setup menu operation
Audio Language
Press ENTER to one of the audio language such as English/French

and Spain, but the condition is that the program system

has included the language code.

Bass
Press ENTER button to select it and then use ,i. / =, to increase or decrease the level of the lower-pitched

sounds.

Treble
Press ENTER button to select it and then use ,i. / _ to increase or decrease the level of the higher-pitched

sounds.

Balance
Press ENTER button to select it and then use ,i. / _ to adjust the audio output between left and right speakers.

Digital Audio Output
Press ENTER button to select the one of mode of the digital audio output such as PCM and RCW.

Auto Volume Adjust
Press ENTER button to adjust the volume automatically.(TV

Press MENU on the front panel or on the remote

and HDMI input only)

control and then use A / v to select the SETUP menu.

Use A / T to select what you want to adjust in the SETUP menu.

Press ENTER button to select it and then use ,_. / _ to adjust

When you are satisfied with your adjustment,

press MENU to exit the main menu.

Tuning Band
Press ENTER button to select Air, Cable, Cable HRC, Cable IRC or Cable Auto.

DTV-Signal
In DTV mode, you can tune manually and adjust the angle. Orientation of the antenna etc.

Setup menu operation
Auto Ch Search
Press A / v to move the cursor to the item to be selected (item selected highlighted in yellow). Press ENTER key to enter
your selection and scan. After the scan is finished, the following menu will display. The channels found the automatically
saved as below:

Note: If you want you exit the Auto Oh Search during the Auto search process, press MENU twice to exit.

Add On Oh Search
When the channels are found, use ENTER to add it to the cannel list

Manual Ch Set
Press ENTER

Channel

button to display a channel list that you can select channel as below:

Labels

Allows you to name the channel that is selected. Use A / v to move and use ,i. / _, to change.

Setup menu operation

Manual Language
To select language of the OSD such as English! French and Spain.

Reset
Press ENTER to return to the factory setting.

Press MENU on the front panel or on the remote

control and then use <. / _ to select the FEATURE menu

Use A / T to select what you want to adjust in the FEATURE menu.

Press ENTER button to select it and then use ,i. / _, to adjust

When you are satisfied with your adjustment,

press MENU to exit the main menu.

Time Set
Press ENTER button to select it and then use <. / b to select the amount of time before your TV turn off automatically
press the ENTER that can select the 30min/60min/90min

and

and OFF.

Time Set Mode

Setup menu operation
You can select one of auto and manual to set the time. When selected auto, the item of year/date and time will be disabled
and can not to adjust. When select the manual mode, you can press A / v

/ ,4 / D, to set the corresponding

functions.

Time Zone
Press ENTER button to select it and then use <. / b. to select the time zone such as Pacific/Alaska/Hawaii/Eastern/
Central/Mountain

Advance Video Menu
Press ENTER to enter the advance video menu as below

Noise Reduction- Spatial: press <. / _. to select on or off.
Noise Reduction -Speaker :press <. / _. to select on or off.
Noise Reduction-Temporal:
Auto Contrast Enhancement:

press <. / _
press <

/ _.

to select on or off.
to select on or off.

Color Temperature: press <. / _. to select one of Normal/Cool

and Warm.

3D Y/C: press <. / _. to select on or off.

Password

Set

Press the ENTER to enter old password menu, and then input the number of 0-9 as below, and you can change the password
when you input the new on twice.

Parental

Control

Press ENTER to enter the sub-menu and then uses the 0-9 to enter the correct password and the Parental Control Menu will
display.

Setup menu operation

US Ratings
Press ENTER to enter the Parental Control Menu as below

M PAA
Press ENTER to lock or unlock one of None! G/PG/PG-13/R/NC-17

and X

None - No restrictions
G - General Audience. This contains little or no violence, no strong language, and little or no sexual dialog or situations.
PG - Children under 13 should be accompanied

by an adult.

PG-13 - Parental guidance suggested. Children under 13 should be accompanied

by an adult.

R - Restricted. Viewers should be 17 or older.
NC-17 - not classified. Viewers should be 17 or older.

TV Rating
Press ENTER to lock or unlock one of TV-MA/TV-14/TV-PG/TV-G!TV-Y7
TV-MA-

and TV-Y.

Mature audiences only. This program may contain mature themes, profane language, graphic violence and explicit

and explicit sexual content.
TV-14 - Parents strongly cautioned.

This program may contain sophisticated

themes, sexual content, strong language and

more intense violence.
TV-PG -

Parents guidance

suggested.

The program

may contain

infrequent

coarse language,

limited violence,

some

suggestive sexual dialog and situations.
TV-G - General audience. This contains little or no violence, no strong language, and little or no sexual dialog or situations.
TV-V7 - Directed for older children. Themes and elements in this program may include mild physical or comedic violence, or
may frighten children under the age of seven.
TV-Y - All children. The themes and elements in this program are specifically

designed for a very young audience, including

children from ages two six.

Setup menu operation
Advanced Parental Lock
When select the ON for Advance Rating, the Advanced Parental Lock will display.

Canadian

English

Press ENTER to lock or unlock one of E/C/C8+/G/PG/14+/18+.
E - Expect No restriction.
C - Children
C8+ - Viewers should be 8 or order.
G - General Audience.
PG - Parental guidance suggested.
14+ - Restricted. Viewers should be 14 or older.
18+ - Restricted. Viewers should be 18 or older.

Canadian

French

Press ENTER to lock or unlock one of E/G/8

arts+/13 arts+/16 arts+ and 18 arts+.

E - Expect No restriction.
G - For all.
8 ans+-

Restricted. Viewers should be 8 or older.

13 ans+-

Restricted. Viewers should be 13 or older.

16 ans+-

Restricted. Viewers should be 16 or older.

18 ans+ - Restricted. Viewers should be 18 or older.

Digital Closed Captions

Setup menu operation
This menu allows you to set the closed

Style: press ,_.

caption,

and press

ENTER to enter Closed

Caption Options

menu as below:

_ to select one of Automatic and Custom, when you select automatic, the other are disable and can not be

adjusted.
Size: press ,q.

_. to select one of Normal/Large

Font: press 4.

_- to select one of Default and from Front 1 to Font 7.

and Small.

Text Color: press ,q. ! _. to select one of Red/Green/Yellow!

Magenta/Cyan/Black

and White.

Text Opacity: press 4. / _- to select one of the Solidi Flashing/Transparent/Translucent
Background

Color: press ,q. / _.

to select one of Red/Green/Yellow/Magenta/Cyan/Black

Background

Opacity: press _. / _. to select one of the Solidi Flashing! Transparent/Translucent

Edge Effect: press ,4. / _. to select one of the None/Raised/Depressed/Uniform!
Edge Color: press _. / _, to select one of Red/Green/Yellow/Magenta/Cyan/Black

and White.

Left Shadow! Right Shadow.
and White.

Press MENU on the front panel or on the remote control and then use .4 / _- to select the Feature menu in VGA
mode.

Use A / T to select what you want to adjust in the FEATURE menu.

Press ENTER button to select it and then use ,4. / _, to adjust

Setup menu operation
3.

When you are satisfied with your adjustment,

press MENU to exit the main menu.

VGA Set
Press A / T button and then press ENTER to enter the VGA set menu as below

H-Pos
Press ENTER button to select it and then use ,4 / _ to adjust the horizontal position of the picture.

V-Pos
Press ENTER button to select it and then use ,q / _, to adjust the vertical position of the picture.

Phase
Press ENTER button to select it and then use ,4 / b. to adjust the phase of the picture.

Clock
Press ENTER button to select it and then use ,4. / _ to adjust the clock of the picture.

Note:
Phase- This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Clock- This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen
size also will change.
Position- This function is to adjust the picture to Left/Right

and Up/Down

as you prefer.

Auto Adjust
Press ENTER button to select it and then use ,t

/ _ to do auto adjust that automatically

adjusts the available options for the

best viewing configuration.

Setting
Press ENTER to do preset that can return to the factory setting.

Press MENU on the front panel or on the remote

control and then use <

/ _ to select the Feature menu in Ypbpr

mode.

Setup menu operation

Use ,= / v

Press ENTER button to select and then use <. / _. to adjust

When you are satisfied with your adjustment,

Component
Press ,L / v

to select what you want to adjust in the FEATURE menu.

press MENU to exit the main menu.

Set
button and then use ENTER to enter the VGA Set menu as below

Press MENU on the front panel or on the remote

control and then use 4. / =, to select the Feature menu in HDMI

mode.

Time Set
Press A / v button and then use ENTER the time set menu that allows you to set the time the TV will display.

Sleep timer
Press ENTER button to select it and then use .4 / b. to adjust the amount of time before your TV turn off automatically

and

Setup menu operation
press the ENTER that can select the 15min/30min/45min/60min/90min/120min/180min/240min and OFF.
Advance Video Menu
Press ENTER to enter the advance video menu.

Title: DVD Video discs are usually divided into several numbered sections called titles.
Chapter:
i

A title comprises

Playing

smaller numbered

sections called chapters.

the DVD Player

1. Press the 'INPUT' button to select 'DVD' mode, if no disc is inserted yet, the display shows 'No Disc'.
2.Insert a DVD with the printed side facing towards the rear of the TV/DVD Player (see below)
CORRE_

INCORRECT

disc MUST face
backside
of TV

Note: The picture of the product may vao_ depending

3.The TV will first display 'Loading',
information

on the model

then change to 'DVD-video'.

Most DVDs will show some preliminary

then stop at a main menu screen.

4. Press PLAY/PAUSE

to play it directly. Or press the DVD-MENU

button to access the disc menu during

playback.
5.Use the direction

button on the remote control to select the desired option. Press ENTER to select the

option or press the I_ button. Playback will now commence.
&After

playback,

press the EJECT button on remote control or EJECT button on TV/DVD

to remove the

disc.

Note: No function"

will sometimes

appear on the screen after a button is pressed.

This indicates

that the

function is not supported at the current time.

Setup menu operation
Getting Started
Carefully

remove

the TV / DVD and all other items from the box. You may wish to store the

packaging for future use.
Please read these instructions

Compatible

thoroughly

before use.

Discs

The DVD player supports the following disc formats:
12cm DVD Video Discs.

12cm Compact Disc Audio Discs.

12cm Still High Resolution
WARNING!

DO NOT INSERT OR PLAY 8CM DISCS, THEY WILL

GET STUCK.

•

Basic

Control

Function

Play/Pause
1.Press the I_ button to play/pause

the DVD. The screen will freeze its current picture when paused.

2. For resume play, press the I_ button.
Stop
•

After pressing the •

button to stop playback.

left on the screen, also '!i'
Press thel_
•

Press the'i'button

'Press Play Key To Continue' will be displayed on the top

on the top right.

button to resume playback.
twice to stop playback completely.

'i'

Will be displayed on the screen.

Fast Playback
You can search either forwards or backwards for a particular part of the DVD.
•

To search forwards,

press the I_

buttons.

The playback speed is doubled and 'FORWARD
Each subsequent

X2' is displayed.

press of the i_1_ button toggles

among

different

speeds

(1_1_2X - I_1_ 4X -

t_1t_8X - P-I_ 16X - I_1_ 32X -PLAY),up to 32 times the normal speed.
Pressing the I_b, buttons after"
•

To resume normal playback

•

To search backwards,

limb, 32X' reverts to normal playback speed.

at any time, press thel_ buttons.

press the _11

button. This operates

in the same way as the _1_ button but in

the reverse direction.
Subtitles
Most DVDs are recorded with subtitles and some have the subtitles available in different languages.
•

To select subtitles,

press the SUB-T button.
29

Setup menu operation
•

If different languages

are available, repeatedly

press the SUB-T button until the language you require is

displayed.
Chapter

Selection

During playback you can select different chapters of the DVD.
Press

DVD-M to the root menu.

Press

direction

buttons

or Next,

buttons to choose different

chapters.

Note: It is just for

reference.
Press

ENTER

button to confirm.

Audio Configuration
Some DVDs are recorded with multiple audio channels.

These can be used for different languages

for commentaries.
Repeatedly

press the AUDIO button to select the desired audio channel.

Repeat Chapter/Title
•

To repeat playback of a chapter, press the REPEAT button while the chapter is playing. 'Chapter'

will be

displayed.
•

To repeat playback of the title, press the REPEAT button twice.
'Title' will be displayed.

•

To repeat playback of the title, press the REPEAT button three times.
'All' will be displayed.

•

Press the REPEAT button four times to cancel repeat playback.

Note: Some discs do not support the repeat function, different disc shows different information.

General Setup Page
a. Press SETUP button on remote control during playing DVD, it will show following menu:
(When the DVD menu displayed

,the DVD system will auto pause. Press SETUP again, it will go on)'

Setup menu operation

b. Press "_'/A'to

choose the items, then enter the desired

already when the desired item becomes

item with ENTER

button.

It has been set

red.

Note: Press Left button to get back the previous

menu.

c. Press SETUP to exit the menu.
d. The items of the menu as below:

TV Shape:

set the Picture Shape:

OSD Lang.: Set the language of OSD menu. Default setting is English.
Last Memory:

set it on to memorize the last stop point. During playing the DVD, you change to other mode.

When you come back to DVD mode, it can play automatically

Audio

from the last stop point.

Setup Page

a. Press SETUP button on remote control during playing

DVD, Press "1_ / _1" until it will show following

menu:
(When the DVD menu displayed

,the DVD system will auto pause. Press SETUP again, it will go on)'

Setup menu operation

b. Press "v/A'to

choose the items, then enter the desired

already when the desired item becomes

item with ENTER

button.

It has been set

red.

Note: Press Left button to get back the previous

menu.

c. Press SETUP to exit the menu.
d. The items of the menu as below:
Downmix:

Preference

choose the downmix mode. There is only one item--stereo.

Page

a. Press SETUP button on remote control during playing DVD, Press "1_ / ,"

until Preference

will show

following menu:
(When the DVD menu displayed

b. Press "_'/A'to

,the DVD system will auto pause. Press SETUP again, it will go on)'

choose the items, then enter the desired

already when the desired item becomes

item with ENTER

button.

It has been set

red.

Note: Press Left button to get back the previous

menu.

c. Press SETUP to exit the menu.
d. The items of the menu as below:

Setup menu operation
TV Type: Choose the TV system that is compatible
Audio:

with the color system of the TV.

Choose the default language you would prefer to for DVD titles.

Subtitle:

Set the language of subtitle menu or turn off the Subtitle.

Note: not all DVD discs are recorded or offer subtitles in multiple language.
Disc Menu: set the default language of Disc menu.
Parental:

movies rated higher than the level set will not be played by selecting

a certain access level. The

parental lock can only be changed after input the correct password.
Note: This function is available only when the discs have rating encoded
It will ask a password

on.

when you select a level except for Adult. The factory

setting of the password

136900.
Press Down button to the 'OK' after finishing input of the password,

then press ENTER button to confirm

and go back to the previous menu.
Password:

Reset the password.

The password

should be 4-digit, and the initial password

is 136900(It

also the supercode).
Note: Press Down button to the 'OK' after finishing

input of the password,

then press ENTER

button to

confirm and go back to the previous menu.
If you forget the old password,
Default:

you can always use the factory setting password

'136900'.

Default the factory' settings EXCEPT the password.

Appendix

Identifying

Problems

If there are any problems
Customer

Setup

Service

using the product,

the list below. If the list below does not solve the problem,

call our

Center immediately.

and Connection

The -IV won't turn on. Check

your power cable connection.

•

I can't view the Basic channels.

•

I want to view cable channels.

•

I want to view satellite

•

Digital broadcasting
connected

The Remote
Change

Check the connection

of the antenna

cable.

channels.

Setup your Satellite

is not functioning.

to your antenna

Menu and Remote
•

please first consult

parabola

Check your antenna

then connect their receiver

antenna

then connect

cable connection.

Check

your satellite

to your TV.
receiver

to the -IV.

if the digital channel

selection

is correctly

between

control and the

cable.

Control
Control

isn't functioning

well.

the batteries.

Check the polarity of the batteries.
Check the angle of the remote

control from the product or if there are any obstacles

the remote

product.
Check if you have pressed

the correct

key for the correct option.

Try to a bright light position near TV's which
•

I cannot change
Press [TV/AV]

channels

External
Check

•

a strong

light source on TV

window.

with the remote control.

and select .

Try to use the remote
•

transmit

control for the cable or satellite

input channels
your external

A Menu cannot

the channel.

cannot be selected.

input connection

cable.

be selected.

Check if the menu is grayed out, and if it is, that menu cannot

be selected.

Screen
•

Poor picture
Is the power cord unplugged?

Make sure the power cable is plugged

in correctly,

and then press the power of the remote

control.
•

Black picture
Check

if external

Press [external
•

input mode is selected
input selection]

Lined and flickering

and select TV

picture.

Try to finely adjust the channel.

Appendix
Are there any TV waves

flowing

or cordless

radio transmitting

stations?

Avoid using cordless

phones,

hairdryers

or electrical

drills.
•

Disfunctioning
Check

if the channel

Try changing
•

channels.
has been selected

correctly.

the position of the antenna.

Picture with white and black dots.
Check

if your antenna

is damaged

or any connections

are broken.

Replace your antenna.
•

Only certain channels
Check

are in black and white

if the program

is being broadcast

in black and white.

Try to check the hue or contrast.
•

The Sub-Screen
Check

is black.

the power of the external

If the power cord is disconnected,
•

Automatic

device connected

to the TV.

the screen will be black.

turn-on is inactive.

When turning

off your TV, you need to use the remote

control or press the power button on the TV. (If you putt the plug on the

TV, the settings will be deleted.)

Sound
•

Poor quality sound
Check

•

if the program

is in stereo. Stereo may not work well in areas with bad reception.

Sound is malfunctioning

while using a cable.

Check your sound connecting
Check
•

if other channels

cable.

also have no sound

I can see images,

but there is no sound.

Press the volume

buttons

Try watching

to increase

the sound.

a video (if the video has sound,

call our customer

Try using Mono for these areas.

check your cable company).

If there

is no problem

with the cable receiver,

then

service.

Check if press MUTE on the remote control..
•

There is a malfunction

after the volume

Try to adjust the external

devices

is increased

connected

to the TV (Digital channel

If you can adjust your sound, try to balance

receiver,

the volume of the TV and the external

DTV, DVD, Cable channel

receiver,

video)

device.

Channel
•

The channels
Connect

are not functioning.

the antenna

Set to memorize

channels

Query the particular
•

A limited number
Change

connectors

in the automatic

broadcasting

of channels

the location

Try to select a few channels

•

Only UHF (14~69)
Check

setting again.

of the antenna.

using numbers

and memorize

them using the add/delete

button.

station.

Channels

if the antenna

channel

station.

are not functioning.

or direction

Query the broadcasting

again.

are unavailable.

is able to receive

UHF.

Appendix
Monitor
•

The PC Screen continually
Check the connection

•

appears

between

the TV and the computer

A "There is no signal "message
This happens
maximum

and disappears.

or frequency

The screen looks like there is water flowing
Check

•

the connector

The screen is unclear
Change

•

Unstable

and flickering

or frequency

of the TV. Try to set the

is deactivated

when any key is pressed

or the mouse is moved)

on it.

to the TV.

Change

the Resolution

and frequency

to the standard

limit.

screen.
of the PC's Graphics

Card should

be set within the TV's range. Check the TV menu's current

mode and set it up again.

Some modes in standard
Check the compatibility
If it is not working

properly.(This

and phase adjustment.

and frequency

mode and standard

resolution

and blurry.

the frequency

The resolution

•

connected

for the maximum

for the TV.

See if power save mode of the PC functions
•

is locked.

appears.

if the signal from the video card is exceeded

resolution

and see if the connector

mode are not working.
of the video card.

for compatible

hardware,

try to upgrade

the driver of the graphics

card.

Appendix

Wall Mounting
Wall mounting(unit:

mm)

Screw Diameter(unit:

100Xl00

Remark: The specification

NOTE:

mm)

Screw Length(unit:

mm)

of screw is just used on the back unit.

Wall mount bracket

vary depending

Specification

is not included

with TV and mounting

on brand and size of bracket.

that came with wall mount for specific

Customer

information

of wall mount bracket

should consult

bracket

on how to mount bracket

mounting

to wall may
instructions

to wall.

100mm

E
E
o
O

Appendix
UNIVERSAL

REMOTE

For Universal
and

refer to your Universal

operate

Remote

Proscan

CONTROL
Control
Remote

CODE

LIST

brands

listed

below,

Control

User

Manual

please

use accompanying

for basic

instruction

Proscan

for changing

codes
TV code

model.

Proscan

codes for Sony TV=8003,8012

Proscan

codes for Philips TV= 1005,1006,1007,1035,1064,1216

Proscan

codes for other universal

remotes=272,132,134,116,040,016,024,056,019,262

Appendix
TV SPECIFICATION
Model

19LB30QD

Diagonal display size

19 inches

Television system

American TV standard ATSC/NTSC

Audio multiplex

BTSC system

Channel coverage
PC mode

VHF: 2-13 UHF: 14-69 CATV:l~125

system, Built in DVD Combo

-6 -1 Digital Terrestrial Broadcast

(8VSB): 2 9 Digital cable (641256 QAM): 1 35
640x480160Hz,800x600160Hz,lO24x768160Hz

YPbPdYCbCr

mode

4801160Hz,480PI60Hz,720PI60Hz,lO801160Hz

HDMI Mode

4801160Hz,480PI60Hz,720PI60Hz,lO801160Hz

Resolution

1440x900

Power source

AC 100 - 240 V ,50 - 60 Hz

Power consumption

Less than 60W

Audio power

3W+3W

Supported Media

DVD, SVCD, JPEG, MP3
RF input: Cable/Antenna

VIDEO input: VIDEO xl
S-VIDEO xl
COMPONENT

HDMIxl

Conection Interface

GRAPHIC input: Analog RGB 15pin xl
AUDIO Input: AV Audioxl
Component Audiox 1
PC Audio Inputxl
AUDIO output: Earphone outputxl

Dimensions

Weight

Length:

19 inches

Width:

9 inches

Height:

16.5 inches

26.7 Ibs

Supplied accessories

User Manual, Warranty Card, Remote control, AC cord, Batteries, QSG,
Warranty Register Card

Design and specifications
CUSTOMER

NOTICE:

are subject

to change without

Use carefully when operating

notice.

to prevent damage

to the screen.