Proscan 40LC45Q User Manual LCD TELEVISION Manuals And Guides L0907507

PROSCAN LCD Television Manual L0907507 PROSCAN LCD Television Owner's Manual, PROSCAN LCD Television installation guides

User Manual: Proscan 40LC45Q 40LC45Q PROSCAN LCD TELEVISION - Manuals and Guides View the owners manual for your PROSCAN LCD TELEVISION #40LC45Q. Home:Electronics Parts:Proscan Parts:Proscan LCD TELEVISION Manual

Open the PDF directly: View PDF PDF.
Page Count: 37

DownloadProscan 40LC45Q User Manual  LCD TELEVISION - Manuals And Guides L0907507
Open PDF In BrowserView PDF
C A N°

L

USER'

NUAL
Model:: 40LC45Q
UM No.: RN0340B0901

Class

B digital

This equipment

device
has been tested and found to comply with the limits for a class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed
interference
frequency
interference
a particular
reception,

in a residential

installation.

energy and, if not installed

This equipment

However,

If this equipment

which can be determined

to correct the interference

generates,

and used in accordance

to radio Communications.
installation.

to provide reasonable

there is no guarantee

harmful

may cause harmful

that interference

interference

by turning the equipment

against

uses and can radiate radio

with the instructions,

does cause harmful

by one or more of the following

protection

will not occur in

to radio or television

off and on, the user is encouraged

to try

measures:

- Reorient or relocate the receiving antenna.
- Increase the separation

between the equipment

- Connect

into an outlet on a circuit different

the equipment

and the receiver.
from that to which the receiver

is

connected.
- Consult the dealer or an experienced

radio/TV technician

for help.

Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE

TO RAIN OR MOISTURE. DANGEROUS

INSIDE THE ENCLOSURE.
QUALIFIED PERSONNEL

HIGH VOLTAGES ARE PRESENT

DO NOT OPEN THE CABINET. REFER SERVICING TO
ONLY.
J

WARNING:

THE APPARATUS
SPLASHING

SHALL NOT BE EXPOSED TO DRIPPING OR

AND THAT NO OBJECTS

FILLED WITH LIQUIDS,

SUCH AS VASES SHALL BE PLACED ON THE APPARATUS.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT IN
OUTLET.

CAUTION: THESE SERVICING INSTRUCTIONS
PERSONNEL

ARE FOR USE BY QUALIFIED SERVICE

ONLY.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT PERFORM ANY SERVICING
ACTIVITIES, BUT CALL QUALIFIED ELECTRICIAN

PERSONNEL.

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
WITH THE SAME OF EQUIVALENT

TYPE.

REPLACED, REPLACE ONLY

CAUTION:

1o reduce the riskof electric shock,
do not remove cover or back.
No user- serviceable parts insTde.
Refer Servicing to qualified service
personnel.

CAUTION:

Changes or modifications not
expressly approved by the party
responsible for compliance with the
FCC Rules could avoid the users'
authority to operate this equipment.

CAUTION:

The TV shall not be exposed to
dripping or splashing. No objects
filled with liquids, such as vases, shall
be placed on the TV.

CAUTION:

Do Not Place This TV on an
unstable cart, stand, or table. The
TV may fall, causing serious injury
to a child or adult, and serious damage
to the TV. Use only with a cart or stand
recommended

by the manufacturer,

or

sold with the TV.

CAUTION:

Installation on concrete wall has passed
UL safety test.

1.

READ THESE INSTRUCTIONS.

10.

2.

KEEP THESE INSTRUCTIONS.

3.

HEED ALL WARNINGS.

CONVENIENCE

4.

FOLLOW ALL INSTRUCTIONS.

WHERE THEY EXIT FROM THE APPARATUS.

5.

DO NOT USE THIS APPARATUS

ON OR PINCHED

NEAR WATER.

11.

6.

kitchen sink or laundry tub, in a wet

PARTICULARLY
RECEPTACLES,

AT PLUGS,
AND THE POINT

ONLY USE ATTACHMENTS/ACCESSORIES

SPECIFIED

BY THE MANUFACTURER.

Do not use this TV near water. For example, do not use near
a bathtub, washbowl,

PROTECT THE POWER CORD FROM BEING WALKED

12.

USE ONLY WITH CART, STAND, TRIPOD, BRACKET, OR

basement, or near a swimming pool, and the like. The TV set

TABLE SPECIFIED

shall not be exposed to dripping or splashing.

WITH THE APPARATUS.

No objects

BY THE MANUFACTURER,

OR SOLD

WHEN A CART IS USED, USE

filled with liquids, such as vases, shall be placed on the TV

CAUTION WHEN MOVING THE CART/

set.

APPARATUS

COMBINATION

TO AVOID

INJURY FROM TIP-OVER.

CLEAN ONLY WITH DRY CLOTH.

Do not place this TV on an unstable cart, stand, tripod,
Unplug the TV from the wall outlet before cleaning. Do
bracket, or table. The TV may fall, causing serious injury to
not use liquid cleaners or aerosol cleaners. Use a
someone, and serious damage to the appliance.

A TV and

damp cloth for cleaning.
cart combination
7.

DO NOT BLOCK
INSTALL

ANY VENTILATION

IN ACCORDANCE

MANUFACTURER'S

OPENINGS,

should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the TV and

WITH THE

cart combination

to overturn.

INSTRUCTIONS.
13.

UNPLUG THIS APPARATUS

DURING LIGHTNING

Slots and openings in the cabinet back or bottom are

STORMS OR WHEN UNUSED FOR LONG PERIODS

provided for ventilation,

OF TIME.

to ensure reliable operation of the TV

and to protect it from overheating.

These openings must not
For added Protection for this TV receiver during a lightning

be blocked or covered. The openings should never be
storm, or when it is left unattended and unused for long
blocked by placing the TV on a bed, sofa, rug, or other
period of time, unplug it from the wall outlet and disconnect
similar surface. This TV should never be placed near or over
the antenna or cable system. This will prevent damage to the
a radiator or heat resource. This TV should not be placed in a
TV due to Lightning and power line surges.
built-in installation such as a bookcase or rack unless proper
ventilation

is provided or the manufacturer's

instructions

have been adhered to.
8.

DO NOT INSTALL NEAR ANY HEAT SOURCES

14,

REFER ALL SERVICING
PERSONNEL.

SERVICING

APPARATUS

HAS BEEN DAMAGED

HEAT REGISTERS,

APPARATUS

(INCLUDE AMPLIFIERS)

SERVICE

IS REQUIRED

WHEN THE

IN ANY WAY, SUCH

SUCH AS
AS POWER-SUPPLY

RADIATORS,

TO QUALIFIED

STOVES, OR OTHER
THAT PRODUCE

CORD OR PLUG IS DAMAGED,

LIQUID HAS BEEN SPILLED OR OBJECTS HAVE
FALLEN INTO THE APPARATUS,

THE APPARATUS

HAS

HEAT.
BEEN EXPOSED
9.

TO RAIN OR MOISTURE,

DOES NOT

DO NOT DEFEAT THE PURPOSE OF THE POLARIZED
OPERATE
OR GROUNDING-TYPE

PLUG. A POLARIZED

NORMALLY,

OR HAS BEEN DROPPED.

PLUG HAS
Note: All figures in the manual are for reference only, please

TWO BLADES WITH ONE WIDER THAN THE OTHER. A
refer to the actual units to determine their appearance.
GROUNDING

TYPE PLUG HAS TWO BLADES AND A

THIRD GROUNDING

PRONG. THE WIDE BLADE OR THE

THIRD PRONG IS PROVIDED
THE PROVIDED

PLUG DOES NOT FIT INTO YOUR

OUTLET, CONSULT
REPLACEMENT

FOR YOUR SAFETY. IF

AN ELECTRICIAN

OF THE OBSOLETE

FOR
OUTLET.

of the same type, until the surface

The front of the display panel has been
specially

treated.

Wipe the panel surface

using only a cleaning

gently
Do not scratch or hit the surface

cloth or a soft, lint-free

fingernails

cloth.
If the surface

is particularly

cloth in a weak detergent

or other hard objects.

contact

with volatile

sprays,

solvents

Furthermore,

avoid

such as insect

and thinner;

otherwise,

the quality

and then remove

liquid. Use this cloth to wipe the surface

the display

substances

of the panel with

dirty, soak a soft, lint-free
solution

of the surface
excess

is dry.

may be adversely

affected.

of

panel, and then wipe it with a dry cloth,

Welcome

to the bright

enjoyment

from your new select.

To obtain

maximum

Product

and

vivid

benefit from

world

of Proscan

your set. Please

TV set. We hope

read this manual

that you will have many

before

making

years

any adjustments

of

and

Registration

Please till out the oroduct

registratbncardand

returr ;t immediately.

Returning the card allows usto contact

you if needed. Keep your sales rece;ot to obtain warranty parts and serviceand
for oroof of purchase. Attach
it nere and record the serial Gqd model numbers in case you need them. The numbers are located on the
back of the television.
Model No.
Serial No.
Purchase Date:
Dealer/Address/Phone:

retain them together

with purchase

receipt for future reference.

Please read all the safety and operating

Toll free call center
www.proscanus.com

1-888-977-6722

instructions

(888-9PROSCAN)

carefully before

begin.

Tableof contents
FCC NOTICE .............................................................................................

1

WARNING

1

AND CAUTION ...........................................................................

IMPORTANT

SAFETY

CLEANING
DEAR

AND

MAINTENANCE

PROSCAN

SAFETY

INSTRUCTIONS

CUSTOMER

PRECAUTIONS

Preparation

for

using

.................................................................
.....................................................................

3
4
4

.............................................................................

6

........................................................................

8

INSTALLATION

TV STAND

...........................................................

your

new

TV .............................................................

9

FRONT PANEL .........................................................................................

9

REAR PANEL ............................................................................................

10

CONNECTIONS

11

Using

the

AND EXTERNAL

Remote

LEARNING

control

INPUT SETTINGS ..............................................

..........................................................................

ABOUT REMOTE CONTROL ...........................................................

REMOTE CONTROL INSTRUCTIONS ...............................................................

12

12
13

Basic operation .........................................................................................

14

TURNING ON AND OFF THE TV ......................................................................

14

CHOOSING TV CHANNEL .............................................................................

14

SELECTING

15

VOLUME
Setup

INPUT SOURCE ..........................................................................

ADJUSTMENT ..............................................................................................

menu

operation

................................................................................

15
16

ADJUST THE OSD SCREEN ...........................................................................

16

SELECT ON SCREEN LANGUAGE ...................................................................

17

VIDEO MENU OPTIONS ................................................................................

17

AUDIO MENU OPTIONS ................................................................................

19

TV MENU OPTIONS .....................................................................................

20

SETUP MENU OPTIONS ...............................................................................

21

PARENTAL MENU OPTIONS ...........................................................................

23

COMPONENT

27

MENU OPTIONS ........................................................................

VGA MENU OPTIONS ..................................................................................

28

HDMI MENU OPTIONS ...................................................................................

29

APPENDIX

................................................................................................

Troubleshooting

.........................................................................................

30
30

Removing TV Stand .......................................................................................

33

Wall Mounting Unit Specification ......................................................................

34

Safety Warnings

35

Universal

.......................................................................................

Remote Control

Code List .................................................................

35

TV Specification ........................................................................................................

36

SafetyPrecautions

,_WARNING
KEEP UNNEEDED

SMALL PARTS AND OTHER OBJECTS OUT OF THE REACH OF

SMALL CHILDREN.

THESE OBJECTS CAN BE ACCIDENTALLY

BE CAREFUL ABOUT PACKAGING

SWALLOWED.

ALSO,

MATERIALS AND PLASTIC SHEETS.

Set up
Do not place the TV set on sloped or unstable surfaces.
Do not place any objects on top of the TV set. If water spills onto the TV set or foreign objects get inside it,
short-circuiting

may occur which could result in fire or electric shock. If any foreign objects get inside the TV set,

please consult an Authorized
Do not cover the ventilation

Service Center.
holes. Doing so may cause the TV set overheated and can cause fire or damage to the

TV set.
Avoid installing this product near electronic equipment
It may cause interference

that is readily affected by electromagnetic

waves.

in image, sound, etc. In particular, keep video equipment away from this

product.

AC Power Supply

Cord

Securely insert the power cord plug as far as it will go. If the plug is not fully inserted, heat may be generated which
could cause fire. If the plug is damaged or the wall socket plate is loose, they should not be used.
Do not handle the power cord plug with wet hands. Doing so may cause electric shocks.
Do not do anything that might damage the power cable. When disconnecting

the power cable, hold the plug, not the

cable.
Do not make any modifications

to, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull

the power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage
to the cable is suspected,

have it repaired at an Authorized

Service Center.

If the TV set will not be used for a long period of time, unplug the power cord from the wall outlet.

If Problems

Occur During Use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the TV set,
unplug the power cord immediately.

Continued

use of the TV under these conditions might cause fire or permanent

damage to the unit. Have the TV evaluated at an Authorized

Service Center. Service to the TV by any unauthorized

personnel is strongly discouraged due to its high voltage dangerous

nature. If water or foreign objects get inside the

TV set, if the TV set is dropped, or if the cabinet becomes damaged, disconnect
Contact an Authorized

Service Center for any repairs that need to be made.

the power cord plug immediately.

SafetyPrecautions
When using the TV set
Do not bring your hands, face or objects close to the ventilation holes of the TV set. Top of the TV set is usually
very hot due to the high temperature

of exhaust air being released through the Ventilation

holes. Burns or personal

injuries can happen if any body parts are brought too close. Placing any object near the top of the TV could also
result in heat damage to the object as well as to the TV if its ventilation
Be sure to disconnect

holes are blocked.

all cables before moving the TV set. Moving the TV with its cables attached might damage

the cables which, in turn, can cause fire or electric shock.
Disconnect

the power plug from the wall outlet as a safety precaution before carrying out any cleaning.

electric shocks can result if this is not done.
Clean the power cable regularly to prevent it from becoming dusty. Built-up dust on the power cord plug can
increase humidity which might damage the insulation and cause fire. Unplug the cord from the wall outlet and
clean it with a dry cloth.
This TV set radiates infrared rays; therefore,

it may affect other infrared communication

infrared sensor in a place away from direct or reflected light from your TV set.

equipment.

Install your

TV STANDINSTALLATION

Place the TV faced

down on a soft cloth or cushion

to protect

the LCD panel

from damage.
Note: The 5 screws
1.

Put the stand body into the stand base.

2.

Insert into 5 black screws

Selecting
1.

a location

(signed

the same.

in picture below) tighten.

for the TV

Place the TV on the floor or on a sturdy
not directly

2.

shown below are completely

platform

in a location where

hit the screen.

Place the TV far enough from the walls to allow proper ventilation.
ventilation

light does

may cause overheating,

which may damage

Inadequate

the TV.

Wall Mounting
Please refer to the page 34 and contact a local dealer or professional for wall mounting.

Preparationfor usingyour newTV- Frontpanel

Familiarizing

Yourself

with the Main Hardware

(The picture of the product may vary depending

on the model)

A. Select signal

input.

(It changes to "ENTER"

function

when main menu displays )

B.Main Menu display and menu selection
C. Channel up
D. Channel down
E. Volume up
F. Volume down
G.ON/OFF

button

Preparationfor usingyour newTV- Rearpanel

Rear panel
(The picture of the product

may vary depending

HDMI Input
Input1: B

on the model)

AV2 Input
Video: M1
Audio: N1, O1

Input2: C
Input3: D
Component

S-Video

Input 1

Video: H, I, J
Audio: K, L
Component

Input 2

Audio: N, O
VGA Input
Video: E

Video: H1, I1 , J1
Audio: K1, L1

Audio: P (3.5mm plug)
AUDIO Output

AV1 Input
Video: M
Audio: N, O

Input
Video: G

Headphone:

Q (3.5mm plug)

COAX Digital Out: F
OTHERS
Power Input: A
External Antenna:

R
]0

Preparationfor usingyour newTV - Connections

1. Checking

Items before Connecting

Please check the list below before
< Check

items before connecting

Check the instruction
different
A.

buttons

connecting

external

the power unless every connection

if turned on while

Connect

C.

Check the terminals

devices.

External

still in the process

is well connected.

products

sometimes

have

to connect

the product

The product

may be

of being connected.

the left (white) and right (red) cables correctly

to the sound cable.

to on the rear panel.

an Antenna

There are internal
< Connecting

to other devices.

and locations.

B.

2. Connecting

the product

>

manual when

Do not connect
damaged

connecting

and external

an Antenna

types of antenna.

>

The rear of LOB TV

Cable TV network

A.

Use a coaxial

cable to connect

mount or external
B.

connect to the [AIR] terminal.

Connect

and the wall

If a Cable signal is required,

connect

terminal.

If both Air and Cable are available,
C.

terminals

antenna.

When an Air signal is required,
to the [CABLE]

the rear panel of the TV's [AIR] or [CABLE]

and then connect

the TV power cord when connecting

both [AIR] and [CABLE]

everything

terminals.

else.

CAUTION
Avoid bending

the copper

tip at the center of the coaxial

cable.

]]

Usingthe remotecontrol- Learningaboutremotecontrol

1.

POWER: Power on/off.

2.

SLEEP: Press to select a preset time interval

POWER

to automatically

--® ®
®

shut the TV.

3.

ASPECT: Press to adjust the screen size.

4.

DISPLAY: Press to Check your current mode.

5.

MTS: Press to select your favorite language
in digital broadcasting.

6.

CC: Press to select closed caption.

7.

FAV.: Add/delete

the current channel to your

favorite channel.
8.

FAV.+:

Press

to

view

the

next

favorite

FAV.-: Press to view the previous

favorite

channel.

@

@

PI_T_JR_ $@g_0

9.

channel.
10. Numberic

Buttons:

Press

to

change

the

channel directly using the numberic buttons.
11. RECALL:

Press

to

switch

between

the

current channel and the last channel.
12. -: When selecting a digital broadcast channel,
press the number,

followed

by "-" button,

followed by sub channel number.
F_£EZE

E×_T

13. EPG: One of signal channel

EPG or Multi

channel EPG.
14. PICTURE:

Press

to

change

to a preset

picture mode.
15. SOUND: Press to change to a preset sound
mode.
ZOOM

Ao8

DVDM

TITLE

SUB-T

AUDIO

16. INPUT:

Press

to

display

a menu

of

all

available input sources. Also used to confirm
@£TUP

REPEAT

your choice in the on-screen menu.
17. ENTER: Enter and confirm button.

PR () S ( A N

18. UP/DOWN

LEFT/RIGHT

Also used to control

: The direction keys.
channel

(UP/DOWN)

and volume (LEFT/RIGHT).
19. MENU: Press to display main menu.
20. MUTE: Press to temporarily switch the sound
Note: The remote control may differ from the above picture.

off.
21. FREEZE: Press to freeze the current picture.
22. EXIT: Exit the current menu.
23. VOL+/-: Volume control buttons.
24. CH+/-: Channel control buttons.
]2

Usingthe remotecontrol- Remotecontrolinstructions

Inserting the batteries

into the remote control

1.

Open the cover of battery cabin on the back of the remote

2.

Insert two AAA 1.5V batteries,

3.

Close the cover.

ensuring

the correct polarity

0

If the remote

0

Are the polarities

of the batteries

®

Are the batteries

worn out?

®

Is there an AC power failure?

®

Is the power cable plugged

o

Is any special fluorescent

control is not working,

control.
(+/-).

see the checkpoints

below.

(+, -) correct?

in?
or neon sign board turned on?

Remote Control Reception Angle
Use the Remote

control within

a range of 7~10m

and at an angle of 30 ° to either side of the receiver.

i 0 r_°
CAUTION
0

Used batteries

0

Kept out of children's

0

Do NOT use new and old batteries

0

Change

0

When not using the remote control over a long time, remove the batteries

should be recycled

both batteries

reach.
together.

at the same time.
from the unit.
]3

Basicoperation- ChoosingTV channel

TURN ON LCD TV

1.

2.

1.

Connect the AC input cable to power the LCD TV. At this time the TV will enter standby mode and indicator show red.

2.

User POWER button or

3.

Wait 5 second after switch off LCD TV then you can turn on LCD TV again.

button on the remote

control.

Using the CH + / CH - on the side panel or on the remote control.
•

Press CH + to increase channel number.

•

Press CH - to decrease channel number.

•

When no OSD menu is used, the arrow keys A / v can also work as CH + / CH - buttons.

Using 0-9 digital buttons and - button
Enter the channel's number with 0-9 digital buttons and - button, then press ENTER button to switch the channel.

3.

For example:
•

To play channel 4: Press digital button 4, then press ENTER button.

•

To play channel 45: Press digital button 4, and then press 5, press ENTER button at last.

•

To play channel 121: Press digital button 1 and 2, and then press 1, press ENTER button at last.

•

To play channel 13-4: Press digital button 1, 3, follow by" -" button, and then press 4, press ENTER button at last.

]4

Basicoperation- Selectinginputsource

Press the INPUT button to select TV, AV, S-Video, Component,

VGA, HDMI inputs. Use the A / v to move

the cursor and ENTER button to confirm the source.

1.

Press VOL+/- to adjust the volume.

2.

If you want to switch the sound OFF, press the MUTE.

3.

You can cancel this function by pressing MUTE or VOL+/-.

4.

When OSD menu is not used, the arrow keys .q. / _ can also work as VOL - / VOL + buttons.

]5

Setupmenuoperation-Adjust the OSDscreen

Press the MENU button to display the main menu.
Use _

/ _- / A / v

buttons to select and adjust the available menus.

NOTE: The OSD (On Screen Display) function
since it provides

enables you to adjust the screen status conveniently

graphical presentation.

When the cursor stays on a main menu function
use ENTER or _ button to activate

it. After activating,

which you can use to choose the concrete

The images in this document
the instrucion

manual

functions

understanding

you need to

the cursor will go forward into the submenu,
with A / v button.

may vary from your TV' menu depending

for better

pictures here are for reference

(Video, Audio, TV, Setup or Parental),

and operation

on the model. We provide

to the TV set. Therefore,

all the

only.

]6

Setupmenuoperation- Videomenuoptions

NOTE: If you use your LCD TV for the first time, you should select the language
for displaying

which will be used

menus and indications

1.

Press MENU to display the main menu.

2.

Press A / v

3.

Use _- button to select OSD Language.

4.

Press b. button to select your favorite language

repeatedly to select the SETUP MENU.

NOTE: In this manual, the OSD (On Screen Display) may be different from your TV's in colors.

Press the MENU on the side panel or MENU on the remote control and then use A / T to select the Video menu,
press ENTER button to enter it (see the picture below),

1.

Use A / v to select what you want to adjust in the VIDEO menu.

2.

Press ENTER or _. button to adjust (according to the guiding sign in the bottom right corner of the menu).

3.

When you are satisfied with your adjustment. Press MENU to exit.

Picture Mode
Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in PICTURE menu.
You may select the picture mode directly by pressing the PICTURE button on the remote control.
In only User mode, user can change the Brightness / Contrast / Color / Tint / Sharpness / Color Temperature.

]7

Setupmenuoperation- Videomenuoptions
Brightness
Press _, / •

button to select it and then use ,q. / b to adjust the brightness of picture.

Contrast
Press _, / •

button to select it and then use ,q. / b to adjust the contrast of picture.

Color
Press _, / •

button to select it and then use ,q. / b to adjust the color saturation

Tint
Press _, / •

button to select it and then use ,q. / b to adjust the tint of picture.

Sharpness
Press _, / •

button to select it and then use <. / b to adjust the sharpness level of picture.

Color Temperature
Press ENTER to enter the submenu.

Color Temperature: To select the mode ...... Standard, Warm, User, Cool.
And the "R Gain, G Gain, B Gain" numbers in "User" mode is set by yourself.

DNR (Dynamic

Noise Reduction)

To remove unwanted artifacts in video, user can adjust DNR mode: Medium, Strong, Auto, Off, Low.

]8

Setupmenuoperation- Audio menuoptions

Press MENU on the side panel or on the remote control and then use A / v to select the AUDIO menu, press ENTER
button to enter it (see the picture below).

1.

Use A / v to select what you want to adjust in the AUDIO menu.

2.

Press ENTER or _ button to adjust (according to the guiding sign in the bottom right corner of the menu).

3.

When you are satisfied with your adjustment.

Press MENU to exit.

Balance
Press A / v button to select it and then use ,t

/ _ to adjust the audio output between left and right speakers.

Bass
Press A / v button to select it and then use _

/ =, to increase or decrease the level of the lower-pitched sounds.

Treble
Press A / v button to select it and then use _

/ =, to increase or decrease the level of the higher-pitched

sounds.

Sound Mode
You can use the presetting sound (User / Voice / Concert / Jazz)
You may select the sound mode directly by pressing the SOUND button on the remote control.

Sound Surround
Press A / v button to select it and then use to select the sound surround on or off.

Digital Audio Output (Coaxial Out )
Press A / v button to select it and then use to select the one of mode of the digital audio output such as PCM and RAW or
off.

]P

Setupmenuoperation- TV menuoptions

Press MENU on the side panel or on the remote control and then use A / T to select the TV menu, press ENTER
button to enter it(see the picture below),

1.

Use A / T to select what you want to adjust in the TV menu.

2.

Press ENTER or b. button to adjust(according

3.

When you are satisfied with your adjustment.

to the guiding sign in the bottom right corner of the menu).
Press MENU to exit.

Tuner Mode
You can select the signal input mode: Antenna, Cable.

Channel Scan
Select "Channel Scan", press ENTER button to start the channel scan. Press MENU to stop or it will not stop until the scan is
finished.

Channel Skip
Select "Channel Skip", press ENTER button to enter the submenu.
Press ,4 / _ button to select the channel you want set, and press ENTER to set.

20

Setupmenuoperation- Setupmenuoptions

Press MENU on the side panel or on the remote control and then use A / T to select the SETUP menu.

1.

Use ,i, / T to select what you want to adjust in the SETUP menu.

2.

Press ENTER or _ button to adjust (according to the guiding sign in the bottom right corner of the menu).

3.

When you are satisfied with your adjustment.

Press MENU to exit.

OSD Language
Press _

/ b. button to select language of the OSD menu as English, Spanish or French.

OSD Transparency
Press _

/ b. button to select transparency of the OSD menu as Medium, Low or High.

Time Setup
Select "Time Setup", press ENTER button to enter the submenu.

Time Zone
To select time zone.

Time
Select "Time", press ENTER button to enter the submenu.

Sleep Timer
You can also set up the Sleep Timer and Auto sleep.

2]

Setupmenuoperation- Setupmenuoptions
Auto Synchronization
Press _ / b. button to set auto synchronization

On/Off.

Timer
Press _ / b. button to set the auto power on and off timer.

Sleep Timer
To select the sleep timer as 5/10/15/30/45/60/90/120/180/240

minutes/off.

Caption
Select "Caption", press ENTER button to enter the submenu (digital functions are only available under DTV signal).

Analog Closed Caption,

Digital Closed Caption

To selectt the analog closed caption and digital closed caption options.

Digital Caption

Style

Select "Digital Caption Style", press ENTER button to enter the submenu.

22

Setupmenuoperation- Parentalmenuoptions
0

Caption Style: press to select one of As Broadcast and Custom, when you select broadcast,

the others

are disable and can not be adjusted.

®

Font Size: press

o

Font Color: press

®

Font Opacity: press <

o

Background Color: press <. / _, to select one of the Black / White / Red / Green / Blue / Yellow / Magenta

,I
<

/ b to select one of Medium/Large

and Small.

/ _, to select one of RedlGreenlBtuelYellowlMagentalCyanlBlack

and White.

/ _, to select one of the Solid/Transparent/Translucent.

/ Cyan.

o

Background Opacity: press <. / _, to select one of the Solid/Transparent/Translucent.

0

Window Color: press ,4

b to select one of the Black / White / Red / Green / Blue / Yellow / Magenta /

Cyan.

0

Window Opacity: press ,4 / b to select one of the Solid / Transparent / Translucent.

Reset Default
Every TV has its original setting before leaving the factory. So the function helps you restore these settings.

Press MENU on the side panel or on the remote control and then use A / v to select the PARENTAL menu.
Enter the original password 0000 to enter the parental menu (see the picture below).

1.

Use _, / v

to select what you want to adjust in the PARENTAL menu.

2.

Press ENTER or _, button to adjust (according to the guiding sign in the bottom right corner of the menu).

3.

When you are satisfied with your adjustment.

Press MENU to exit.

Program Block (see below)

Rating Enable
Press <. / _. button to select On/Off, when you select Off, the others below are disabled and can not be adjusted.
23

Setupmenuoperation- Parentalmenuoptions
U.S. TV Ratings
Press ENTER button to enter, and use ,4. / D, / A / v

•

button to select, and press ENTER button to confirm.

TV-Y - All children. The themes and elements in this program are specifically designed for a very young
audience, includingchildren

Q

from ages two six.

TV-Y7 - Directed for older children. Themes and elements in this program may include mild physical or
comedic violence, or may frighten children under the age of seven.

O

TV-G - General audience. This contains little or no violence, no strong language, and little or no sexual
dialog or situations.

•

TV-PG - Parents guidance suggested. The program may contain infrequent coarse language, limited
violence, some suggestive sexual dialog and situations.

Q

TV-14 - Parents strongly cautioned. This program may contain sophisticated themes, sexual content,
strong language and more intense violence.

•

TV-MA-

Mature audiences only. This program may contain mature themes, profane language, graphic
violence and explicit and explicit sexual content.

U.S. Movie Ratings
Press ENTER button to enter, and use ,q. / _. / ,I, / v

O

button to select, and press ENTER button to confirm.

G - General Audience. This contains little or no violence, no strong language, and little or no sexual dialog or
situations.

O

PG - Children under 13 should be accompanied

O

PG-13 - Parental guidance suggested. Children under 13 should be accompanied

by an adult.

O

R- Restricted. Viewers should be 17 or older.

O

NC-17 - not classified. Viewers should be 17 or older.

•

X - Hard core films. Viewers should be 17 or older.

by an adult.

24

Setupmenuoperation- Parentalmenuoptions
Canadian

English Ratings

Press ENTER button to enter, and use < / _. / A / •

Q

C - Children.

O

C8+ - Viewers should be 8 or order.

O

G - General Audience.

O

PG - Parental guidance suggested.

O

14+ - Restricted. Viewers should be 14 or older.

O

18+ - Restricted. Viewers should be 18 or older.

button to select, and press ENTER button to confirm.

Canadian French Ratings
Press ENTER button to enter, and use <

/ _ / ,i, / •

button to select, and press ENTER button to confirm.

•

G - For all.

•

8 ans+- Restricted. Viewers should be 8 or older.

•

13 ans+ - Restricted. Viewers should be 13 or older.

•

16 ans+ - Restricted. Viewers should be 16 or older.

•

18 ans+ - Restricted. Viewers should be 18 or older.

25

Setupmenuoperation- Parentalmenuoptions
Open V-Chip
Select "V-Chip", press ENTER button to enter, you will see an item "U.S. (50 states + possessions)",

then press ENTER

button again to enter the Open V-Chip menu (see the picture below).
You can select the item you want to set, press ENTER button to enter, and use

,4. / _. button to select, and press

ENTER button to confirm.

Change Password
To change the password of PARENTAL menu (see blow).

Input the new password in the first blank, and input it again in the second blank to confirm.

Clear All
To clear all the settings and return to the default factory setting.

26

Setupmenuoperation- Componentmenuoptions

Press MENU on the side panel or on the remote control and then use <

/ _. to select the OSD menu in Component

mode.

m

1

1.

Use A / v

to select what you want to adjust in the each menu.

2.

Press ENTER or _, button to adjust (according to the guiding sign in the bottom right corner of the menu).

3.

When you are satisfied with your adjustment.

The functions of OSD menu for Component

Press MENU to exit.

/ AV / S-Video inputs are similar with TV mode except that there

is no TV menu in these modes. For the detailed information,

please attend to the instructions

for TV mode

OSD menu for reference.

27

Setupmenuoperation- VGAmenuoptions
Press MENU on the side panel or on the remote control and then use <

1.

Use A / T to select what you want to adjust in the Video menu.

2.

Press ENTER button to select it and then use ,t

3.

When you are satisfied with your adjustment,

/ _. to select the Video menu in VGA mode.

! =, to adjust

press MENU to exit the main menu.

VGA
Press A / T button and then press ENTER to enter the VGA menu as below.

Auto Adjust
Press ENTER button to select it and then use ,4 / _, to do auto adjust that automatically adjusts the available options for the
best viewing configuration.

H-Position
Press ENTER button to select it and then use ,4 / _, to adjust the horizontal position of the picture.

V-Position
Press ENTER button to select it and then use ,4 / _, to adjust the vertical position of the picture.

Phase
Press ENTER button to select it and then use ,4 / _ to adjust the phase of the picture.

Clock
Press ENTER button to select it and then use ,4 / _ to adjust the clock of the picture.

28

Setupmenuoperation- HDMImenuoptions
Note:
Phase- This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Clock- This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen
size also will change.
Position- This function is to adjust the picture to Left/Right

and Up/Down

as you prefer.

Press MENU on the side panel or on the remote control and then use <

/ _ to select the Video menu in HDMI

mode.

1.

Use A / T to select what you want to adjust in the each menu.

2.

Press ENTER or _, button to adjust(according

3.

When you are satisfied with your adjustment.

The functions
NDR function.

to the guiding sign in the bottom right corner of the menu).
Press MENU to exit.

of OSD menu in HDMI mode are similar with TV mode except that there is no TV menu or
For the detailed

information,

please attend to the instructions

for TV mode OSD menu for

reference.

2P

Appendix-Tr0ublesh00ting

Identifying

Problems

If there are any problems
Customer

Setup

Service

using the product,

If the list below does not solve the problem,

call our

Center immediately.

and Connection

The TV won't turn on. Check

your power cable connection.

•

I can't view the Basic channels.

•

I want to view cable channels.

•

I want to view satellite

•

Digital broadcasting
connected

The Remote
Change

Check

the connection

of the antenna

cable.

Register with your local cable company

channels.

Setup your Satellite

is not functioning.

to your antenna

Menu and Remote
•

please first consult the list below.

parabola

Check your antenna

then connect

antenna

then connect

cable connection.

Check

their receiver
your satellite

to your TV.
receiver

to the TV.

if the digital channel

selection

is correctly

between

control and the

cable.

Control
Control

isn't functioning

well.

the batteries.

Check the polarity of the batteries.
Check the angle of the remote

control from the product or if there are any obstacles

the remote

product.
Check if you have pressed

the correct key for the correct option.

Try to a bright light position near TV's which
•

I cannot change
Press [TV/AV]

channels

External
Check

•

a strong

light source on TV 

window.

with the remote control.

and select .

Try to use the remote
•

transmit

control for the cable or satellite

input channels
your external

the channel.

cannot be selected.

input connection

cable.

A Menu cannot be selected.
Check if the menu is grayed out, and if it is, that menu cannot be selected.

Screen
•

Poor picture
Is the power cord unplugged?

Make sure the power cable is plugged

in correctly,

and then press the power of the remote

control.
•

Black picture
Check

the LED light being blue.

Press input button repeatedly
•

Lined and flickering

and check caption for mode in panel.

picture.

Try to finely adjust the channel.

30

Appendix-Tr0ublesh00ting
Are there any TV waves

flowing

or cordless

radio transmitting

stations?

Avoid using cordless

phones,

hairdryers

or electrical

drills.
•

Disfunctioning
Check

if the channel

Try changing
•

channels.
has been selected

correctly.

the position of the antenna.

Picture with white and black dots.
Check

if your antenna

is damaged

or any connections

are broken.

Replace your antenna.
•

Only certain channels
Check

are in black and white

if the program

is being broadcast

in black and white.

Try to check the hue or contrast.
•

The Sub-Screen
Check

is black.

the power of the external

If the power cord is disconnected,
•

Automatic

device connected

to the TV.

the screen will be black.

turn-on is inactive.

When turning

off your TV, you need to use the remote

control or press the power button on the TV. (If you pull the plug on the

TV, the settings will be deleted.)

8eund
•

Poor quality sound
Check

•

if the program

is in stereo. Stereo may not work well in areas with bad reception.

Sound is malfunctioning

while using a cable.

Check your sound connecting
Check
•

if other channels

cable.

also have no sound

I can see images,

but there is no sound.

Press the volume

buttons

Try watching

to increase

the sound.

a video (if the video has sound,

call our customer

Try using Mono for these areas.

check your cable company).

If there

is no problem

with the cable receiver,

then

service.

Check if press MUTE on the remote control..
•

There is a malfunction

after the volume

Try to adjust the external

devices

is increased

connected

to the TV (Digital channel

If you can adjust your sound, try to balance

receiver,

the volume of the TV and the external

DTV, DVD, Cable channel

receiver,

video)

device.

Channel
•

The channels
Connect

are not functioning.

the antenna

Set to memorize

channels

Query the particular
•

A limited number
Change

connectors

in the automatic

broadcasting

of channels

the location

Try to select a few channels

•

Only UHF (14~69)
Check

setting again.

of the antenna.

using numbers

and memorize

them using the add/delete

button.

station.

Channels

if the antenna

channel

station.

are not functioning.

or direction

Query the broadcasting

again.

are unavailable.

is able to receive

UHF.

3]

Appendix-Tr0ublesh00ting
Monitor
•

The PC Screen continually
Check the connection

•

appears

between

the TV and the computer

A "There is no signal "message
This happens
maximum

and disappears.

or frequency

The screen looks like there is water flowing
Check

•

the connector

The screen is unclear
Change

•

Unstable

and flickering

or frequency

of the TV. Try to set the

is deactivated

when any key is pressed

or the mouse is moved)

on it.

to the TV.

Change

the Resolution

and frequency

to the standard

limit.

screen.
of the PC's Graphics

Card should

be set within the TV's range. Check the TV menu's

current

mode and set it up again.

Some modes in standard
Check the compatibility
If it is not working

properly.(This

and phase adjustment.

and frequency

mode and standard

resolution

and blurry.

the frequency

The resolution

•

connected

for the maximum

for the TV.

See if power save mode of the PC functions
•

is locked.

appears.

if the signal from the video card is exceeded

resolution

and see if the connector

mode are not working.
of the video card.

for compatible

hardware,

try to upgrade

the driver of the graphics

card.

32

Appendix-Removing
TV Stand
If you decide to install the wall mount your LCD TV, always use a VESA standard wall mount appropriate
for the size and weight of the LCD TV.

CAUTION
•

Be sure to follow
TV falling

•

Before

•

Unplug

the instructions.

Incorrect

installation

of the stand/wall

mount

may result in the

over.

detaching

(or attaching)

and remove

any cables

the stand,
and/or

unplug

the AC cord from the AC input terminal.

other component

connectors

from the rear of the TV.

NOTES
Before proceeding,
described

make sure the appropriate

in the instructions

bracket(s)

are attached to the wall and the back of the TV as

provided with the wall bracket. Extreme care should always be used when

removing the stand/wall mount to avoid damage to the LCD panel.
As shown below:
(The picture may vary depending

on the model.)

PROCEDURE
Place the TV set on a surface
1. Loose the 5 rear screws
(The 5 screws

that is totally stable, flat and smooth,

such as a table.

in TV.

are the completely

the same.)

2. Draw out the stand gently.

33

Appendix-WallMountingUnit Specification

Unit Dimension(unit:

mm)

Screw Diameter

400 x 200

M6

Remark: The specification

NOTE:

instructions

mm)

14

of screw is just used on the back cabinet.

Wall mount bracket is not included

vary depending

Screw Length(unit:

with TV and mounting

on brand and size of bracket, Customer

that came with wall mount for specific

of wall mount bracket to wall may

should consult bracket mounting

information

on how to mount bracket to wall,

400mm

200mm

Before reading the installing instruction,

A,

The wall mount is not contained
specifications

please notice:

in the accessories

sold with television.

We only provide the installing

but not the wall mount itself. If you need the mount, please consult with the local dealer

for the assorted fitting parts.

B.

We strongly
unappropriate

suggest

to set the wall

mount with equipments

of specification

we ordered.

If not,

installing may cause damage to both the device and yourself.

34

Appendix-SafetyWarnings

1.

Do not set up the wall mount by yourself. Please contact qualified professionals

2.

The TV should not be mounted on walls or surfaces which have an angle more than 10 degrees with
vertical direction.

3.

Otherwise

The walls for mounting

for installation.

the TV set may fall.

must have enough strength to hold the whole weight of TV set. For example,

concrete wall and brickwork

are eligible. Do not place the mount on soft walls such as earth walls and

plasterboard.
4.

If spare

parts of different

qualified professionals
5.

Before attaching
Otherwise

specifications

(such as screws)

are used during

mounting,

consult

with

to make sure these parts are safe and effective.

the base to wall, ensure the holes for anchors are in keeping with the installing rules.

there may exist some potential problems.

6.

Do not place any heating source under your television.

7.

Do not place the TV near anything

dripping.

Or else, it can cause fire.

Transducers

and high voltage wires should be kept far

away from the apparatus too. Or else, it may cause creepage,

electric shock or bad resonance.

8.

Do not place TV in a location where collision or vibration is liable to happen.

9.

In order to avoid unexpected

falling of the TV set, do not put any strong force on TV or wall mount after

installing.
10. Be sure to unplug the TV before installing.

Keep anything hard or sharp away from the screen panel to

prevent the scuffing.
11. After installing,

For Universal

Remote

to your Universal
Proscan

if there is any need to move the cabinet, please contact the qualified

Control

Remote

brands listed below, please use accompanying

Control

User Manual

for basic instruction

professionals.

Proscan codes and refer

for changing

TV code to operate

model.

•

Proscan codes for Sony TV = 8003, 8012, 8058

•

Proscan codes for Philips TV = 1005, 1006, 1007, 1035, 1064, 1216

•

Proscan codes for other universal

remotes

= 272, 132, 134, 116,040,016,

024, 056, 019, 262

35

Appendix-TVSpecification

Model

40LC45Q

Diagonal display size

40 inches

Television system

American TV standard ATSC/NTSC

Audio system

MTS/SAP
VHF: 2~13

Channel coverage

UHF: 14~69

system

CATV: 1~125

Digital Terrestrial Broadcast(8VSB):

2~69

Digital cable (64/256 QAM): 1~135
PC mode

640x480/60Hz,

YPbPr/YCbCr

mode

800x600/60Hz,

1024x768/60Hz

480i/60Hz, 480p/60Hz, 720p/60Hz, 1080i/60Hz, 1080p/60Hz

HDMI Mode

480i/60Hz, 480p/60Hz, 720p/60Hz, 1080i/60Hz, 1080p/60Hz

Max Resolution

1920xl 080

Power source

AC 100 - 240 V, 50 - 60 Hz

Power consumption

230W

Audio power

8W + 8W
RF input:

Cable/Antenna

VIDEO input:

VIDEO x2

xl

S-VIDEO xl
COMPONENT

x2

HDMI x3
Connection Interface

PC input: Analog RGB 15pin xl
AUDIO Input:

AV Audio x2
Component Audio x2
PC Audio Input xl

AUDIO output:

Coaxial Out x 1 (Digital audio out)
Headphone audio output xl

TV Dimensions

Width: 39.0 inches

Height: 27.8 inches

Depth: 12.9 inches

Package Dimensions

Width: 48.8 inches

Height: 29.9 inches

Depth: 9.8 inches

NET Weight

46.0 Ibs

Package Weight

54.6 Ibs
User Manual, Warranty Card, Remote control, AC cord, Batteries, QSG,

Supplied accessories

Warranty Register Card

Design and specifications
CUSTOMER

NOTICE:

are subjects to change without

notice,

Use carefully when operating to prevent damage to the screen,

36



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 37
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 4, 0, 0, 13
Create Date                     : Fri Aug 07 04:37:27 2009
Author                          : 
Title                           : 
Subject                         : 
EXIF Metadata provided by EXIF.tools

Navigation menu