Proxim Wireless 4000LR Outdoor Access Point User Manual RegulatoryFlyer 3

Proxim Wireless Corporation Outdoor Access Point RegulatoryFlyer 3

Contents

Regulatory Info

ORiNOCO AP-4000MR-LR Access Point Safety and Regulatory Compliance Information(August 2006)IMPORTANT!Visit http://support.proxim.com for the latest safety and regulatory compliance information for this product.
AP-4000MR-LR Safety and Regulatory Information2Copyright© 2006 Proxim Corporation. All rights reserved. Covered by one or more of the following U.S. patents: 5,231,634; 5,875,179; 6,006,090; 5,809,060; 6,075,812; 5,077,753. This user’s guide and the software described in it are copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Proxim Corporation.TrademarksORiNOCO and Proxim are registered trademarks, and the Proxim logo is a trademark, of Proxim Wireless Corporation. All other trademarks mentioned herein are the property of their respective owners.ORiNOCO AP-4000MR-LR Safety and Regulatory Compliance InformationP/N 72930/3 August 2006
Products Covered in the Guide AP-4000MR-LR Safety and Regulatory Information1Products Covered in the GuideThis document contains important safety and regulatory compliance information for the following products:Please see the following sections for more information:•Safety Information•FCC Compliance Information•Information for Professional Installers•Certification SummaryIMPORTANT!Visit http://support.proxim.com for the latest safety and regulatory compliance information for this product.Please read this document before installing and using your product, and save these instructions.Product Model NumbersORiNOCO Tri-Mode Ruggedized Access Point AP-4000MR-LR 8670-MR-LR-US
Safety Information AP-4000MR-LR Safety and Regulatory Information2Safety InformationThis product has been evaluated to, and complies with, the Safety requirements of UL60950:2000, and IEC60950:1999; the Standards for the Safety of Information Technology Equipment. When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:• Operate and install this product as described in this manual. This device must be installed and used in strict accordance with the manufacturer's instructions. • This product is suitable for installation in air handling spaces (plenum).• Use only the AC/DC power supply adapter provided. For replacement, contact your local supplier or distributor.• To avoid the risk of electric shock from lightning, do not use this product during an electrical storm.• Installation of this product must conform to local regulations and codes.• When using this product with an external antenna, see the installation documentation provided with the antenna system.• No user serviceable parts; all repairs and service must be handled by a qualified service center.
FCC Compliance Information AP-4000MR-LR Safety and Regulatory Information3FCC Compliance InformationThis device operates in the 2.4 GHz and 5.75 - 5.85 bands in compliance with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.To comply with the FCC radio frequency exposure requirements, the following antenna installation and device operating configurations must be satisfied:•Product models using external antennas require professional installation. • The antennas used for professional installation must be fixed-mounted on indoor/outdoor permanent structures with a separation distance of at least 123 cm from all persons.• Antennas must not be co-located and must not operate in conjunction with any other antenna or transmitter.ModificationsChanges or modifications to this device that are not expressly approved by the manufacturer of the product could void the user’s authority to operate the equipment.WarningsThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection again harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver.• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.
Information for Professional Installers AP-4000MR-LR Safety and Regulatory Information4Information for Professional InstallersAdjusting Tx Output PowerUse the following formula in combination with the table of EIRP limits to calculate system transmit power (based on EIRP limits):Tx Power Allowed (dBm) = EIRP Limit (dBm) + CL (dB) – G (dB) where: Tx Power = Output power measured at the antenna input EIRP Limit = EIRP limits specified belowCL = Coax cable loss including loss of connectors G = Antenna Gain Antenna Types and Maximum GainProfessional installers should select only the antenna types listed in the following table, with gain not exceeding the listed maximum gain for each type.Frequency (GHz) EIRP Limit (dBm)2.4 - 2.4835 365.725 - 5.850 36Frequency Band Antenna Type Maximum Gain (dBi)2.4 GHz Omni 12 Flat Panel 14Sector 17 5 GHz Omni 12Panel 28Sector 18
Certification Summary AP-4000MR-LR Safety and Regulatory Information5Certification Summary Country Certification/Reference NumberUSA HZB-4000LRCanada 1856A-AP4000MRLR

Navigation menu