Contents
- 1. Users Manual
- 2. user manual 1
- 3. user manual 2
- 4. user manual
user manual 2
Draft #3 EP10™ HAND-HELD COMPUTER & ACCESSORIES REGULATORY & WARRANTY GUIDE July 21, 2011 PN 8000235.B ISO 9001 Certified Quality Management System Draft #3 © Copyright 2011 by Psion Inc. 2100 Meadowvale Boulevard, Mississauga, Ontario, Canada L5N 7J9 http://www.psion.com This document and the information it contains is the property of Psion Inc., is issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except for the sole purpose of promoting the sale of Psion manufactured goods and services. Furthermore, this document is not to be used as a basis for design, manufacture, or sub-contract, or in any manner detrimental to the interests of Psion Inc. Draft #3 RETURN TO FACTORY WARRANTY Psion provides a return to factory warranty on this product for a period of twelve (12) months in accordance with the statement of Warranty and Product Support provided at: http://www.psion.com/warranty The warranty on Psion manufactured equipment does not extend to any product that has been tampered with, altered, or repaired by any person other than an employee of an authorized Psion service organization. See Psion terms and conditions of sale for full details. Important: Psion warranties take effect on the date of shipment. WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) DIRECTIVE 2002/96/EC & WASTE BATTERIES DIRECTIVE 2006/66/EC This Product, and its accessories, comply with the requirements of the Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC. The batteries used in this Product comply with the requirements of Directive 2006/66/EC. If your end-of-life Psion product, battery or accessory carries a label as shown here, please contact your local country representative for details on how to arrange recycling. For a list of international subsidiaries, please go to: http://www.psion.com/environmental-compliance.htm Draft #3 RESTRICTION ON HAZARDOUS SUBSTANCES (ROHS) DIRECTIVE 2002/95/EC What is RoHS? The European Union has mandated that high environmental standards be met in the design and manufacture of electronic and electrical products sold in Europe, to reduce hazardous substances from entering the environment. The “Restriction on Hazardous Substances Directive (RoHS)” prescribes the maximum trace levels of lead, cadmium, mercury, hexavalent chromium, and flame retardants PBB and PBDE that may be contained in a product. Only products meeting these high environmental standards may be “placed on the market” in EU member states after July 1, 2006. RoHS Logo Although there is no legal requirement to mark RoHS-compliant products, Psion Inc. indicates its compliance with the directive as follows: The RoHS logo located either on the back of the product or underneath the battery in the battery compartment (or on a related accessory such as the charger or docking station) signifies that the product is RoHS-compliant as per the EU directive. Other than as noted below, a Psion product that does not have an accompanying RoHS logo signifies that it was placed on the EU market prior to July 1, 2006, and is thereby exempt from the directive. Note: Not all accessories or peripherals will have a RoHS logo due to physical space limitations or as a result of their exempt status. Draft #3 DISCLAIMER Every effort has been made to make this material complete, accurate, and up-to-date. In addition, changes are periodically incorporated into new editions of the publication.Psion Inc. reserves the right to make improvements and/or changes in the product(s) and/or the program(s) described in this document without notice, and shall not be responsible for any damages, including but not limited to consequential damages, caused by reliance on the material presented, including but not limited to typographical errors. Psion Inc. reserves the right to make improvements and/or changes in the product(s) and/or the program(s) described in this document without notice, and shall not be responsible for any damages including, but not limited to, consequential damages, caused by reliance on the material presented. Psion, the Psion logo, EP10 and the names of other products and services provided by Psion are trademarks of Psion Inc. Windows® and the Windows Logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Psion Inc. is under license. All trademarks used herein are the property of their respective owners. Draft #3 Draft #3 TABLE OF CONTENTS 1. DECLARATION OF CONFORMITY . . . . . . . . . . . . . . . . . . . . . . . . . 2. REGULATORY SUMMARY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3. SAFETY SUMMARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 CHARGING ACCESSORIES SAFETY INSTRUCTIONS . . . . 3.2 IMAGER & LASER SAFETY INSTRUCTIONS . . . . . . . . . . . 3.3 BATTERY SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . 4. SUPPORT SERVICES & WORLDWIDE OFFICES. . . . . . . . . . . . . 4.1 TECHNICAL SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 PRODUCT REPAIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 WORLDWIDE OFFICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide 11 11 14 14 15 15 Draft #3 Draft #3 1. DECLARATION OF CONFORMITY When used in a residential, commercial or light industrial environment the product and its approved UK and European accessories fulfil all requirements for CE marking. EU Directives This equipment complies with the essential requirements of EU Directives 1999/5/EC, 2004/108/EC and 2006/95/EC, as applicable. Declarations are available from your local representative. Където е приложимо, оборудването е съобразено с основните изисквания на Европейските директиви 1999/5/ЕС, 2004/108/ЕС и 2006/95/ЕС. Декларации са налични от местния представител. Toto zařízení splňuje základní požadavky směrnic EU 1999/5/ES, 2004/108/ES a 2006/95/ES, vždy dle konkrétního způsobu použití. Příslušná prohlášení jsou k dispozici u vašeho lokálního distributora. Dette udstyr overholder de væsentlige krav i EU-direktiv 1999/5/EF, 2004/108/EF og 2006/95/EF, som er relevant. Erklæringerne kan fås hos din lokale repræsentant. Tämä laitteisto täyttää seuraavat EU Direktiivien olennaiset vaatimukset 1999/5/EY, 2004/108/EY ja 2006/95/EY, soveltuen. Vaatimustenmukaisuusvakuutukset ovat saatavilla paikalliselta edustajalta. Dit produkt voldoet aan de voorschriften van de richtlijnen van de EG Raad (1999/5/EC, 2004/108/EC en 2006/95/EC), indien van toepassing. Declaraties zijn beschikbaar bij uw locale vertegenwoordiger. Cet appareil est conforme aux exigences essentielles des Directives de l’Union Européenne 1999/5/CE, 2004/108/CE et/ou 2006/95/CE. Veuillez consulter votre représentant local pour les déclarations applicables. Ezen készülék technikai jellemzői megfelelnek a vonatkozó 1999/5/ EC, 2004/108/EC és 2006/95/EC EU rendeletekben foglalt követelményeknek. A megfelelőségi dokumentáció a gyártó helyi partnereinél áll az Ön rendelkezésére. EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide Draft #3 Questo prodotto,ove applicabile, risponde alle direttive Europee 1999/ 5/EC, 2004/108/EC e 2006/95/EC. Dichiarazioni sono disponibili presso il vostro rappresentante locale. Ten sprzęt jest zgodny z ogólnymi wymaganiami Dyrektyw UE nr 1999/5/EC, 2004/108/EC i 2006/95/EC, na ile znajdują zastosowanie. Oświadczenia są dostępne u lokalnych przedstawicieli. Acest echipament este in conformitate cu cerintele esentiale ale Directivelor EU 1999/5/EC, 2004/108/EC si 2006/95/EC. Certificatele sunt disponibile la reprezentanta locala. Toto zariadenie spĺňa základné požiadavky smerníc EÚ 1999/5/ES, 2004/108/ES a 2006/95/ES, vždy podľa konkrétneho spôsobu použitia. Príslušné vyhlásenia sú k dispozícii u vášho lokálneho distributora. Das Gerät erfüllt die wesentlichen Anforderungen der EU-Direktiven 1999/5/EC, 2004/108/EC und 2006/95/EC, soweit anwendbar. Eine entsprechende Bescheinigung kann bei Ihrem zuständigen Vertriebspartner angefordert werden. Ta oprema je skladna in izpolnjuje nujne zahteve direktiv EU 1999/5/ ES, 2004/108/ES in 2006/95/ES. Deklaracije so na voljo pri vašem krajevnem predstavniku. Αυτός ο εξοπλισμός συμμορφώνεται με τις βασικές απαιτήσεις των εφαρμοσμένων οδηγιών 1999/5/EC, 2004/108/EC kai 2006/95/EC της Ευρωπαικής Ένωσης. Οι επίσημες δηλώσεις είναι διαθέσιμες από τον τοπικό σας αντιπρόσωπο. Dan l-apparat huwa konformi mar-regolamenti stipulati mid-Direttivi Ewropej 1999/5/EC, 2004/108/EC u 2006/95/EC skond kif inhu applikabbli. Kopji ta’ dawn id-dikjarazjonijiet huma aċċessibbli mingħand ir-rappreżentant locali tiegħek. Este equipo cumple com las condiçãos vigorantes de la EU diretivas 1999/5/EC, 2004/108/EC e 2006/95/EC, com é pertinente. Las normativas estão disponível com su representado local. Este equipo cumple con los requerimientos esenciales de las directivas de la EU 1999/5/EC, 2004/108/EC y 2006/95/EC, si es aplicable. Dichas declaraciones están en poder de sus representantes locales. Ši iranga atitinka esminius ES direktyvu 1999/5/EC, 2004/108/EC ir 2006/95/EC reikalavimus. Deklaracijas galima gauti iš Jusu vietinio atstovo. EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide Draft #3 Šis iekartas atbilst ES direktivu 1999/5/EC, 2004/108/EC un 2006/95/ EC prasibam. Deklaracijas ir pieejamas regionalajas parstavniecibas. See seadmed vastavad olulistele nõuetele ELi direktiivide 1999/5/EC, 2004/108/EC ja 2006/95/EC, mida kohaldatakse. Deklaratsioonid on saadaval Teie kohaliku esindaja. Use of the 802.11 device in France: owing to French Government restrictions, the 802.11 device is limited to indoor use. It may be used outdoors, on private property, only with prior authorization from the French Ministry of Defense. 2. REGULATORY SUMMARY FCC Regulations: 15.19(a)(3): This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.105(b): NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide Draft #3 • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operation on the 5.15-5.25GHz frequency band is restricted to indoor use only. The FCC requires indoor use for the 5.15-5.25GHz band to reduce the potential for harmful interference to co-channel Mobile Satellite Systems. Therefore, it will only transmit on the 5.25-5.35 GHz, 5.47-5.725 GHz and 5.725 -5.850 GHz band when associated with an access point (AP). RF Exposure Information (SAR) This mobile phone meets the government's requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide Draft #3 While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: GM37515UA or GM37515CA. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 1.5 cm from your body when the phone is switched on. IC Regulations The 7515U variant complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1. l'appareil ne doit pas produire de brouillage, et 2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide Draft #3 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB003 du Canada. This Category II radio communication device complies with Industry Canada Standard RSS-310. Ce dispositif de radiocommunication de catégorie II respecte la norme CNR-310 d'Industrie Canada. IMPORTANT NOTE: IC Radiation Exposure Statement The 7515U variant is in compliance with SAR for general population/ uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528. This equipment should be installed and operated with minimum distance 1.5cm between the radiator & your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Emissions Information For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations (ICES-003). When using the 802.11 radio option, to prevent radio interference, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada (ICES-003). En cas d’utilisation du module radio 802.11, afin d'éviter toute interférence radio avec le service autorisé, l'appareil doit être utilisé à l'intérieur, tout en tant éloigné de toute fenêtre afin de garantir le maximum de protection. Si cet équipement (ou son antenne émettrice) est installé à l'extérieur, il est alors soumis à licence. EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide Draft #3 Emissions Information for South Korea: Class B Equipment (Residential Use) 이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로 하며,모든 지역에서 사용할 수 있습니다. Warning for Australia The user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations. 3. SAFETY SUMMARY 3.1 CHARGING ACCESSORIES SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for charging devices. Important: • • • • • • To avoid the risk of fire or personal injury, use only the AC adaptor recommended by Psion. Before using the charging accessories, read all instructions and cautionary markings on (1) charging device, (2) battery and (3) product using battery. The mains power cord shall comply with national safety regulations of the country where the equipment is to be used. Use of an attachment not recommended or sold by Psion may result in fire, electric shock, or personal injury. To reduce risk of damage to the electric plug and cord when unplugging the charging device, pull the plug rather than the cord. Make sure the cord is positioned so that it is not stepped on, tripped over, or otherwise subjected to damage or stress. Do not operate the charging device with a damaged cord or plug. Replace immediately. EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide Draft #3 • • • • • • • 10 Do not operate the charging device if it has received a sharp blow, been dropped, or otherwise damaged in any way; it should be inspected by qualified service personnel. Do not disassemble the charging device; it should be repaired by qualified service personnel. Incorrect reassembly may result in electric shock or fire. To reduce risk of electric shock, unplug the charging device from the outlet before attempting any maintenance or cleaning. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in fire or electric shock. If an extension cord must be used, make sure: - The plug pins on the extension cord are the same number, size, and shape as those on the charging device. - The extension cord is properly wired and in good electrical condition and that the wire size is larger than 16 AWG. For indoor use only. Do not expose the charging device to rain or snow. Do not connect the Ethernet port of the accessory to outdoor cables. Do not use the charging device if, after an overnight charge, any of the batteries feel warmer than the charging device housing. The charging device should be inspected by qualified service personnel. EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide Draft #3 3.2 IMAGER & LASER SAFETY INSTRUCTIONS Important: When equipped with an imager or scanner: This product is a Class I/Class II LED/laser product according to CDRH 21 CFR 1040.10 and 1040.11 and Class1/Class 2 LED /laser product according to IEC 60825-1 2nd edition. Warnings For your safety, it is critical that you comply with the following warnings: • • • Caution! Do not look into the laser beam or point the beam at people or animals. Using controls or adjustments, or performing procedures other than those specified herein may result in hazardous radiation exposure. Using optical instruments with this product will increase eye hazard. 3.3 BATTERY SAFETY INSTRUCTIONS Warning: BATTERIES MUST BE DISPOSED OF SAFELY AND PROPERLY AND IN ACCORDANCE WITH LOCAL LEGISLATION. For proper disposal, forward all used batteries to one of: Psion Inc. 2100 Meadowvale Blvd. Mississauga, Ontario Canada L5N 7J9 Psion Corporation 3000 Kustom Drive Hebron, Kentucky USA 41048 Psion S.A. Parc Club Du Golf-Bat 1. 13856 Aix-En-Provence Cedex 3 France You can also contact your local Psion representative for battery disposal information in your area, or go to the following web site to locate a Psion office: http://www.psion.com/us/about/contact_psion-offices.htm EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide 11 Draft #3 Warning: Counterfeit Lithium-Ion Battery Packs! Only use genuine Psion battery packs. Counterfeit battery packs and battery packs re-manufactured using non original battery cells and components could pose a safety hazard due to poor quality components and/or lack of safety protection circuits. Non genuine battery packs are also not likely to meet the strict functional and environmental specification required for safe and correct operation when used in Psion equipment. Using or attempting to recharge non genuine battery packs could result in poor performance, product damage, excessive heat being generated, battery leakage, fire or explosion resulting in personal injury. To avoid these issues only purchase and use genuine battery packs from authorized Psion distributors. All batteries recommended for this system have been qualified to IEEE1725: 2006. Replace only with the same or equivalent type recommended by Psion. Dispose of used batteries according to the instructions. Vorsicht: Explosiongefahr bei unsachgemäßem Austausch der Batterie. Ersatz darf nur durch denselben oder einen vom Hersteller empfohlenen gleichwertigen Typ erfolgen. Gebrauchte Batterien sind nach Angaben des Herstellers zu entsorgen. The battery must be fully charged before first use. Warning: Before charging or using the battery pack, it is critical that the safety information in this section be reviewed and that all warnings are strictly followed. Warning: TO PREVENT the battery from leaking acid, generating heat or exploding, adhere to the precautions below. • Caution! Danger of fire, explosion, leakage or other hazard if a battery is incorrectly handled, charged, disposed of or replaced. 12 EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide Draft #3 • • • • • • • • • • • • • • • • The battery incorporates built-in safety devices. To ensure their proper function, do not disassemble or alter any parts of the battery. Do not short-circuit the battery by directly connecting any of the exposed terminals with metal objects such as wire. Do not transport or store the battery together with metal objects such as necklaces, hair pins, etc. Do not dispose of batteries in fire as they may explode or release toxic materials and cause burns. Do not use or leave the battery near a heat source such as a fire or heater. Do not immerse the battery in water. When charging, use the charging device specifically designed for the battery. Do not pierce, strike, throw or step on the battery. Do not directly solder the battery. Do not connect the battery to an electrical outlet, vehicle cigarette lighter, etc. Do not put battery into a microwave oven or pressurized container. Immediately remove the battery from the device or charger and stop use if the battery gives off an odour, generates heat, becomes discoloured or deformed, or in any way appears abnormal during use. Do not continue charging the battery if it does not recharge within the specified charge time. The battery may burst or ignite if the battery leaks. Always ensure that it is away from any exposed flames. If leaking electrolyte sprays into your eyes, rinse them with clean running water, and immediately seek medical attention. Do not store the battery in extremely high temperatures (e.g., a vehicle, strong direct sunlight, etc.). This may cause the battery to overheat or ignite, and it may also reduce the performance and service life of the battery. Do not use in areas where static electricity is greater than what the manufacturer guarantees. EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide 13 Draft #3 • • • • Keep batteries out of reach of children. Do Not Operate In An Explosive Atmosphere! Operating Psion equipment where explosive gas is present may result in an explosion. Do not remove covers or open enclosures! To avoid injury, the equipment covers and enclosures should only be removed by qualified service personnel. Do not operate the equipment without the covers and enclosures properly installed. Avoid dropping the hand-held or battery. If the computer or the battery is dropped, especially on a hard surface, and the operator suspects damage, have it checked by qualified service personnel. 4. SUPPORT SERVICES & WORLDWIDE OFFICES Psion provides a complete range of product support services to its customers worldwide. These services include technical support and product repairs. 4.1 TECHNICAL SUPPORT For technical support in North America: Call Toll free: +1 800 387 8898 Option 3, or Direct Dial: Ext. 1999 +1 905 813 9900 Option 3. For technical support outside of North America, please follow the link for your region on the Psion Community Support website at: http://community.psion.com/support 14 EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide Draft #3 4.2 PRODUCT REPAIRS For repair service in North America: Call Toll free: +1 800 387 8898 Option 2 or Direct Dial: Ext. 1999 +1 905 813 9900 Option 2. For repair service outside of North America, please contact your local office listed in the following document: http://www.psion.com/documents/com/quickReferenceGuides/ Help_Desk_Contact_Numbers_A4.pdf 4.3 WORLDWIDE OFFICES COMPANY HEADQUARTERS Psion Inc. 2100 Meadowvale Boulevard Mississauga, Ontario, Canada L5N 7J9 Tel: +1 905 813 9900 Fax: +1 905 812 6300 E-mail: salescdn@psion.com NORTH AMERICAN HEADQUARTERS & U.S. SERVICE CENTRE Psion Corporation 3000 Kustom Drive Hebron, Kentucky USA 41048 Tel: +1 859 371 6006 Fax: +1 859 371 6422 E-mail: salesusa@psion.com EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide 15 Draft #3 INTERNATIONAL SUBSIDIARIES www.psion.com/us/about/contact_psion-offices.htm Psion S.A. La Duranne 135 Rue Rene Descartes BP 421000 13591 Aix-En-Provence Cedex 3; France Tel: +33 4 42 90 88 09 Fax: +33 4 42 90 88 88 E-mail: tekeuro@psion.com 16 Psion Espana S.L. Plaza de la Pau, s/n Edificio 3, 2º 08940 Cornella de Llobregat, Barcelona, Spain +34 902 884 220 +34 934 750 230 ptxspain@psion.com EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide Draft #3 Draft #3 8000235
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Eva Szabo Copyright : Psion Inc. Create Date : 2002:03:20 10:33:53Z Keywords : PN:, 8000235, Rev., B Modify Date : 2011:07:22 11:24:04+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : Acrobat Distiller 10.1.0 (Windows) Format : application/pdf Title : EP10 Hand-Held Computer and Accessories Regulatory & Warranty Guide Creator : Eva Szabo Subject : PN: 8000235 Rev. B Creator Tool : FrameMaker 9.0 Metadata Date : 2011:07:22 11:24:04+08:00 Document ID : uuid:fe24774e-80fc-4772-b241-77885cf33d33 Instance ID : uuid:56cc57a2-b225-4382-8fbc-d72b3643f07c Page Mode : UseOutlines Page Count : 24EXIF Metadata provided by EXIF.tools