Psion 8515BT VEHICLE-MOUNT COMPUTER w/ BLUETOOTH User Manual 8515 Vehicle Mount Computer

Download:
Mirror Download [FCC.gov]
Document ID	772310
Application ID	g6MfUL1KQXOLODJqlCOdtQ==
Document Description	INSTALLATION INSTRUCTIONS
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	107.46kB (1343286 bits)
Date Submitted	2007-03-26 00:00:00
Date Available	2007-03-26 00:00:00
Creation Date	2007-03-15 16:02:46
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2007-03-15 16:20:33
Document Title	8515 Vehicle-Mount Computer User Manual
Document Creator	FrameMaker 7.2
Document Author:	Gabrielle Neff

Peripheral Devices & Accessories
Installing The MT34XX RAM Mounting Kit
1. Select the best orientation for your specific application. Preferred orientations maintain
the centre of mass of the vehicle-mount assembly, directly over the centre of the base.
Orientation Of Vehicle-Mount Assembly
The tilt and rotation of the cradle can be adjusted by the operator. Keep in mind that if
the handscrew is loosened, the cradle can slip causing harm to the operator or damage to
equipment. Also note that under extreme vibration, the mount may slowly ‘settle’.
Occasional readjustment and tightening of the handscrew may be required. Psion Teklogix offers a tightening tool (P/N 9000594) which can be used to minimize settling.
Tightening Tool
Psion Teklogix 8515 Vehicle-Mount Computer User Manual
Peripheral Devices & Accessories
Installing The MT34XX RAM Mounting Kit
The platform on which you secure the vehicle-mount must be strong enough to support
5 kg. Never attach the mount to a plastic dash or a wooden platform without the appropriate backing plate and bracing. In addition, you must provide operator access at the
top, bottom, and sides of the unit.
RAM Mount Kit P/N 1008447
Keyboard RAM Mount
Vesa Plate
P/N 9001934
RAM Mount Kit
4 inch RAM Mount
P/N 9001932
RAM Ball End
P/N 9001804
You can install two vesa plates or one each of a vesa plate and a RAM ball end to the RAM
mount.
With the keyboard RAM ball end or vesa plate(s) installed on the RAM mount:
•
•
2.
Attach the RAM mount to a standard cradle (P/N 1008442) using the hardware included
with your kit.
Attach the other end of the mount to almost any surface. The ball design allows both
ends of the RAM mount to be angled to suit the operator's needs.
Attaching the mounting bracket to the vehicle-mount: The kit provides four screws
and washers that are used to secure the mounting bracket to the vehicle-mount. Place
screw (D) through washer (C) and mounting bracket (B) and affix to the vehicle-mount
(A). Torque to 23 in-lbs.
Psion Teklogix 8515 Vehicle-Mount Computer User Manual

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 2
PDF Version                     : 1.6
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:8d6adddc-a836-48fc-a937-f71721e8cc8b
Modify Date                     : 2007:03:15 16:20:33-04:00
Create Date                     : 2007:03:15 16:02:46-04:00
Metadata Date                   : 2007:03:15 16:20:33-04:00
Document ID                     : uuid:30c20d60-8f67-42c6-9958-b0bb5f44a944
Format                          : application/pdf
Title                           : 8515 Vehicle-Mount Computer User Manual
Creator                         : FrameMaker 7.2
Author                          : Gabrielle Neff
Producer                        : Acrobat Distiller 7.0.5 (Windows)

EXIF Metadata provided by EXIF.tools