Psion HFT2A3 RFID PADDLE HF-T2-A3 User Manual RFID Paddle HF T2 A3 UserMan

Psion Inc RFID PADDLE HF-T2-A3 RFID Paddle HF T2 A3 UserMan

USERS MANUAL

January 28, 2008 RFID Paddle HF-T2-A3 Sheet 1 of 6 RFID Paddle HF-T2-A3: INSTRUCTIONS Important: All Approval and safety information is outlined in the ‘7535 G2 Handheld-computer User Manual’ or ‘WorkAbout Pro G2 Handheld-computer User Manual’ – part number. This manual is available on our website www.psionteklogix.com through the Teknet extranet Easily installable RFID Paddle HF-T2-A3 for the WORKABOUT PRO G2 allows you to customise this hand-held to meet your specific mobile computing requirements. This chapter outlines how to install the RFID Paddle HF-T2-A3. • Connect the RFID Paddle HF-T2-A3 to the Tether connector. Easily installable RFID Paddle HF-T2-A3 for the 7535 G2 allows you to customise this hand-held to meet your specific mobile computing requirements. This chapter outlines how to install the RFID Paddle HF-T2-A3. • Connect the RFID Paddle HF-T2-A3 to the JAE connector. Easily installable RFID Paddle HF-T2-A3 for computer. This chapter outlines how to install the RFID Paddle HF-T2-A3. • Connect the DB9 connector to the serial communication port.
January 28, 2008 RFID Paddle HF-T2-A3 Sheet 2 of 6 Options Power supply: 1. Using USB Power • Connect the USB connector to the USB port (this is only for the power supply of the PADDLE reader). 2. Using DB9 Pin 9 power • Connect the DIN Female connector to the DIN Male connector (this is only for the power supply by the PIN 9 on the DB9 connector). 3. Using custom power supply • Sold the Cable on the DIN Female connector in following: Custom Cable+5VMasse
January 28, 2008 RFID Paddle HF-T2-A3 Sheet 3 of 6 READING AREA: This area depends of the TAG type, TAG packaging, environment (metallic or not). TAG Reading Area
January 28, 2008 RFID Paddle HF-T2-A3 Sheet 4 of 6 RFID Paddle HF-T2-A3 RFID Regulatory Information
January 28, 2008 RFID Paddle HF-T2-A3 Sheet 5 of 6
January 28, 2008 RFID Paddle HF-T2-A3 Sheet 6 of 6 IMPORTANT NOTE FOR NORTH AMERICA: FCC Information to Users: This product and it antennas must not be co-located or operated in conjunction with any other antenna or transmitter. Radiation Exposure Compliance This product complies with the FCC RF exposure limits for an uncontrolled environment. For continued compliance, the product must not be held closer than 20 cm from the rest of the body. Federal Communication Commission Interference Statement. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Emissions Information for Canada: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Navigation menu