Psion HFT2A3 RFID PADDLE HF-T2-A3 User Manual RFID Paddle HF T2 A3 UserMan

Download:
Mirror Download [FCC.gov]
Document ID	922946
Application ID	S5U7VLqnuhU6sciNrsj6LA==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.25kB (315568 bits)
Date Submitted	2008-04-02 00:00:00
Date Available	2008-04-03 00:00:00
Creation Date	2008-03-19 09:23:14
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2008-03-19 09:23:14
Document Title	Microsoft Word - RFID Paddle HF-T2-A3 UserMan.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	heyer

RFID Paddle HF-T2-A3: INSTRUCTIONS
Important: All Approval and safety information is outlined in the ‘7535 G2 Handheld-computer User
Manual’ or ‘WorkAbout Pro G2 Handheld-computer User Manual’ – part number. This manual is available
on our website www.psionteklogix.com through the Teknet extranet
Easily installable RFID Paddle HF-T2-A3 for the WORKABOUT PRO G2 allows you to customise this
hand-held to meet your specific mobile computing requirements. This chapter outlines how to install the
RFID Paddle HF-T2-A3.
•
Connect the RFID Paddle HF-T2-A3 to the Tether connector.
Easily installable RFID Paddle HF-T2-A3 for the 7535 G2 allows you to customise this hand-held to meet
your specific mobile computing requirements. This chapter outlines how to install the RFID Paddle HF-T2A3.
•
Connect the RFID Paddle HF-T2-A3 to the JAE connector.
Easily installable RFID Paddle HF-T2-A3 for computer. This chapter outlines how to install the RFID
Paddle HF-T2-A3.
•
Connect the DB9 connector to the serial communication port.
January 28, 2008
RFID Paddle HF-T2-A3 Sheet 1 of 6
Options Power supply:
1. Using USB Power
•
Connect the USB connector to the USB port (this is only for the power supply of the PADDLE
reader).
2. Using DB9 Pin 9 power
•
Connect the DIN Female connector to the DIN Male connector (this is only for the power supply
by the PIN 9 on the DB9 connector).
3. Using custom power supply
•
Sold the Cable on the DIN Female connector in following:
+5V
Masse
Custom Cable
January 28, 2008
RFID Paddle HF-T2-A3 Sheet 2 of 6
READING AREA:
This area depends of the TAG type, TAG packaging, environment (metallic or not).
Reading Area
TAG
January 28, 2008
RFID Paddle HF-T2-A3 Sheet 3 of 6
RFID Paddle HF-T2-A3
RFID Regulatory Information
January 28, 2008
RFID Paddle HF-T2-A3 Sheet 4 of 6
January 28, 2008
RFID Paddle HF-T2-A3 Sheet 5 of 6
IMPORTANT NOTE FOR NORTH AMERICA:
FCC Information to Users:
This product and it antennas must not be co-located or operated in conjunction with any other antenna or
transmitter.
Radiation Exposure Compliance
This product complies with the FCC RF exposure limits for an uncontrolled environment. For continued
compliance, the product must not be held closer than 20 cm from the rest of the body.
Federal Communication Commission Interference Statement.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
Emissions Information for Canada:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
January 28, 2008
RFID Paddle HF-T2-A3 Sheet 6 of 6

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:03:19 09:23:14+01:00
Create Date                     : 2008:03:19 09:23:14+01:00
Format                          : application/pdf
Title                           : Microsoft Word - RFID Paddle HF-T2-A3 UserMan.doc
Creator                         : heyer
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:e2f23f15-66e3-47d8-91c3-1ff8cc8af34b
Instance ID                     : uuid:fba5b992-0b28-4e6c-bb90-1b0c53ee9457
Page Count                      : 6
Author                          : heyer

EXIF Metadata provided by EXIF.tools