Psion PX750BT Psion Teklogix Handheld Computer User Manual Ik n Rugged PDA Phone
Psion Inc Psion Teklogix Handheld Computer Ik n Rugged PDA Phone
Psion >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 963956 |
| Application ID | ofHuzXaYPDoGQYGHQRu08w== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 239.99kB (2999887 bits) |
| Date Submitted | 2008-07-02 00:00:00 |
| Date Available | 2008-07-02 00:00:00 |
| Creation Date | 2008-05-15 22:04:28 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2008-07-01 13:11:05 |
| Document Title | Ikôn Rugged PDA Phone User Manual |
| Document Creator | FrameMaker 8.0 |
| Document Author: | Gabrielle Neff |
Preliminary Draft Warrington Hand-Held Computer User Manual May 15, 2008 ISO 9001 Certified Quality Management System Part No. 8100157.A Preliminary Draft This user manual supports Model Numbers: - PX750BT - PX750BT8 - FCC ID: GM3PX750BT and GM3PX750BT8 © Copyright 2008 by Psion Teklogix Inc., Mississauga, Ontario 2100 Meadowvale Boulevard, Mississauga, Ontario, Canada L5N 7J9 http:\\www.psionteklogix.com This document and the information it contains is the property of Psion Teklogix Inc., is issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except for the sole purpose of promoting the sale of Psion Teklogix manufactured goods and services. Furthermore, this document is not to be used as a basis for design, manufacture, or sub-contract, or in any manner detrimental to the interests of Psion Teklogix Inc. Windows® and the Windows Logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such trademarks by Psion Teklogix Inc. is under license. All trademarks are the property of their respective holders. Preliminary Draft Return-To-Factory Warranty Psion Teklogix Inc. provides a return to factory warranty on this product for a period of twelve (12) months in accordance with the Statement of Limited Warranty and Limitation of Liability provided at www.psionteklogix.com/warranty. (If you are not already a member of Teknet and you attempt to view this warranty, you will be asked to register. As a member of Teknet, you will have access to helpful information about your Psion Teklogix products at no charge to you.) In some regions, this warranty may exceed this period. Please contact your local Psion Teklogix office for details. The warranty on Psion Teklogix manufactured equipment does not extend to any product that has been tampered with, altered, or repaired by any person other than an employee of an authorized Psion Teklogix service organization. See Psion Teklogix terms and conditions of sale for full details. Warning: Psion Teklogix warranties take effect on the date of shipment. Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC This Product, and its accessories, comply with the requirements of the Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC. If your end-of-life Psion Teklogix product or accessory carries a label as shown here, please contact your local country representative for details on how to arrange recycling. For a list of international subsidiaries, please go to: www.psionteklogix.com/EnvironmentalCompliance Preliminary Draft Restriction On Hazardous Substances (RoHS) Directive 2002/95/EC What is RoHS? The European Union has mandated that high environmental standards be met in the design and manufacture of electronic and electrical products sold in Europe, to reduce hazardous substances from entering the environment. The “Restriction on Hazardous Substances Directive (RoHS)” prescribes the maximum trace levels of lead, cadmium, mercury, hexavalent chromium, and flame retardants PBB and PBDE that may be contained in a product. Only products meeting these high environmental standards may be “placed on the market” in EU member states after July 1, 2006. RoHS Logo Although there is no legal requirement to mark RoHS-compliant products, Psion Teklogix Inc. indicates its compliance with the directive as follows: The RoHS logo located either on the back of the product or underneath the battery in the battery compartment (or on a related accessory such as the charger or docking station) signifies that the product is RoHS-compliant as per the EU directive. Other than as noted below, a Psion Teklogix product that does not have an accompanying RoHS logo signifies that it was placed on the EU market prior to July 1, 2006, and is thereby exempt from the directive. Note: Not all accessories or peripherals will have a RoHS logo due to physical space limitations or as a result of their exempt status. Disclaimer Every effort has been made to make this material complete, accurate, and up-to-date. In addition, changes are periodically added to the information herein; these changes will be incorporated into new editions of the publication. Psion Teklogix Inc. reserves the right to make improvements and/or changes in the product(s) and/or the program(s) described in this document without notice, and shall not be responsible for any damages, including but not limited to consequential damages, caused by reliance on the material presented, including but not limited to typographical errors. Preliminary Draft TABLE OF CONTENTS Chapter 1: Approvals & Safety Summary 1.1 1.2 Declaration Of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Chapter 2: Introduction 2.1 2.2 2.3 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Warrington Hand-Held Computer Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Chapter 3: Basic Checkout 3.1 Preparing The Warrington Hand-Held For Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 3.1.1 The Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 3.1.1.1 Charging The Main Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 3.1.2 The Super Capacitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 3.2 Switching The Warrington On And Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 3.2.1 Installing The Battery And Switching The Unit On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 3.2.2 Switching The Unit Off (Suspend). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 3.3 3.4 Calibrating The Touchscreen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Configuring The Murata 802.11b/g Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 3.4.1 Assigning An IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 3.4.2 Name Servers Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 3.4.3 Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 3.4.3.1 Rearranging Preferred Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 3.4.3.2 Deleting A Preferred Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 3.4.3.3 Changing Network Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Checking The Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Data Transfer Between The PC And The Hand-Held . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 3.6.1 Using Microsoft ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 3.6.2 Using Microsoft Vista . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 3.5 3.6 3.7 3.8 VoIP – Using Push-To-Talk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Resetting The Warrington. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 3.8.1 Performing A Warm Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 3.8.2 Performing A Cold Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Warrington Hand-Held Computer User Manual Preliminary Draft Contents Chapter 4: Working With Windows CE 5.0 4.1 Navigating In Windows CE 5.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 4.1.1 Navigating Using A Touchscreen And Stylus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 4.1.2 Navigating Using The Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 4.2 4.3 Working With Files, Folders And Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 The Startup Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 4.3.1 The Desktop Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 4.3.2 The Taskbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 4.3.2.1 Using The Taskbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 4.3.2.2 Customizing The Taskbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 The Start Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 4.4.1 The Desktop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 4.4.2 Security Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 4.4.3 Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 4.4.4 Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 4.4.5 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 4.4.6 Run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 4.4.7 Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 4.4 4.5 Using A Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Chapter 5: Getting To Know The Warrington 5.1 5.2 5.3 5.4 ii Features Of The Warrington Hand-Held Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 5.2.1 Battery Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 5.2.2 Removing The Battery Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 5.2.2.1 Battery Swap Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 5.2.3 Charging The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 5.2.3.1 Chargers And Docking Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Switching The Hand-Held On And Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 The Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 5.4.1 Modifier Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 5.4.1.1 Activating Modifier Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 5.4.1.2 Locking Modifier Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 5.4.2 The Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 5.4.3 Function Keys And Macro Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 5.4.3.1 Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 5.4.3.2 The Macro Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 5.4.4 26-Key Keyboard: Accessing Alpha Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 5.4.5 The Keypad Backlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Warrington Hand-Held Computer User Manual Preliminary Draft Contents 5.5 The Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 5.5.1 Adjusting The Display Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 5.5.2 Calibrating The Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 5.6 Warrington Hand-Held Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 5.6.1 LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 5.6.2 Audio Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 5.6.2.1 Adjusting The Warrington Speaker Volume . . . . . . . . . . . . . . . . . . . . . . . . . . 67 5.6.3 Onscreen Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 5.7 Monitoring The Battery And Maximizing Run Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 5.7.1 Storing Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 5.8 5.9 Uploading Data In A Docking Station. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Bluetooth Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 5.9.1 Pairing A Bluetooth Headset Or Other Bluetooth Device. . . . . . . . . . . . . . . . . . . . . . . . 72 5.10 The MicroSD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 5.10.1 Inserting The Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 5.11 General Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 5.11.1 Caring For The Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 5.11.2 Cleaning The Warrington . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Chapter 6: Configuration 6.1 6.2 6.3 6.4 6.5 Remote Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 The TekTerm Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 The Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Control Panel Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 6.5.1 Display Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 6.5.1.1 Display Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 6.5.1.2 Display Appearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 6.5.2 Keyboard Properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 6.5.2.1 Key Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 6.5.2.2 Sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 6.5.2.3 Keyboard Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 6.5.2.4 Keyboard One Shot Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 6.5.2.5 Keyboard Macro Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 6.5.2.6 Unicode Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 6.5.2.7 Scancode Remapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94 6.5.2.8 Lock Sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97 6.5.3 Volume And Sound Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 6.5.3.1 Volume Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Warrington Hand-Held Computer User Manual iii Preliminary Draft Contents 6.5.4 6.5.5 6.5.6 6.5.7 6.5.3.2 Sound Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Power Management Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 6.5.4.1 Battery Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 6.5.4.2 Power Saving Suspend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101 6.5.4.3 Suspend Threshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102 6.5.4.4 Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103 6.5.4.5 Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103 Stylus Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104 6.5.5.1 Double-Tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104 6.5.5.2 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104 6.5.5.3 Touch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 Manage Triggers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 6.5.6.1 Trigger Mappings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106 6.5.6.2 Add And Edit Trigger Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 Certificate Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109 6.6 Bluetooth Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110 6.6.1 The Devices Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 6.6.1.1 Pairing A Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 6.6.2 The Servers Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114 6.6.3 Outgoing Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115 6.6.4 Active Conn. Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116 6.6.5 The Properties Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117 6.6.6 The Search For Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 6.6.7 The Bluetooth GPRS WAN Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 6.7 Total Recall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123 6.7.1 Creating A Backup Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124 6.7.2 Restoring A Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128 6.8 The Storage Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128 6.8.1 Formatting A Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128 6.8.2 Creating Partitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129 6.8.3 Partition Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131 6.9 IPv6 Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133 6.10 Scanner Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134 6.10.1 Bar Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134 6.10.1.1 Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135 6.10.1.2 Restoring Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135 6.10.2 Decoded (Internal) Scanners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136 6.10.2.1 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136 6.10.2.2 Decoded (Internal) – Advanced Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . .137 iv Warrington Hand-Held Computer User Manual Preliminary Draft Contents 6.10.2.3 Decoded (Internal) – 2D Scanning Options . . . . . . . . . . . . . . . . . . . . . . . . . .139 6.10.2.4 Decoded (Internal) Data Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139 6.10.2.5 Code 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 6.10.2.6 Code 128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143 6.10.2.7 EAN 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143 6.10.2.8 EAN 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144 6.10.2.9 UPC A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144 6.10.2.10 UPC E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145 6.10.2.11 UPC/EAN Shared Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146 6.10.2.12 Code 93 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147 6.10.2.13 Codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147 6.10.2.14 MSI Plessey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148 6.10.2.15 Interleaved 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149 6.10.2.16 Discrete 2 of 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150 6.10.2.17 RSS Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150 6.10.2.18 Composite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151 6.10.2.19 PDF-417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151 6.10.2.20 Micro PDF-417. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152 6.10.3 Decoded (ISCP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 6.10.3.1 Decoded (ISCP) – Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 6.10.3.2 Decoded (ISCP) – Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 6.10.3.3 Code 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154 6.10.3.4 Code 128. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155 6.10.3.5 EAN 13 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157 6.10.3.6 EAN 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157 6.10.3.7 UPC A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 6.10.3.8 UPC E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 6.10.3.9 UPC/EAN Shared Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159 6.10.3.10 Code 93 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 6.10.3.11 Codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 6.10.3.12 MSI Plessey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161 6.10.3.13 Code 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162 6.10.3.14 Interleaved 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162 6.10.3.15 Matrix 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163 6.10.3.16 Discrete 2 of 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163 6.10.3.17 Telepen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164 6.10.3.18 RSS Code (Reduced Space Symbology). . . . . . . . . . . . . . . . . . . . . . . . . . . . .165 6.10.3.19 PDF-417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165 6.10.3.20 Micro PDF-417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165 6.10.3.21 Codablock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166 6.10.4 Imager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167 6.10.4.1 Imager – Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167 Warrington Hand-Held Computer User Manual Preliminary Draft Contents 6.10.4.2 Imager – Advanced Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168 6.10.4.3 Code 39 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171 6.10.4.4 Code 128 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171 6.10.4.5 EAN 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171 6.10.4.6 EAN 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172 6.10.4.7 UPC A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172 6.10.4.8 UPC E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172 6.10.4.9 Code 93 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172 6.10.4.10 Codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173 6.10.4.11 Interleaved 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173 6.10.4.12 RSS Code (Reduced Space Symbology) . . . . . . . . . . . . . . . . . . . . . . . . . . . .173 6.10.4.13 Composite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173 6.10.4.14 PDF-417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173 6.10.4.15 Micro PDF-417. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174 6.10.4.16 2D Data Matrix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174 6.10.4.17 2D QR Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174 6.10.4.18 2D Maxicode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174 6.10.4.19 2D Aztec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174 6.10.4.20 Postal: PlaNET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175 6.10.4.21 Postal: PostNET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175 6.10.4.22 Postal: Australian. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175 6.10.4.23 Postal: Japanese . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175 6.10.4.24 Postal: Korean. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175 6.10.4.25 Postal: Royal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176 6.10.5 Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176 6.10.5.1 Double Click Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176 6.10.5.2 Display Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177 6.10.6 Translations Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178 6.10.6.1 Case Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179 Chapter 7: Peripheral Devices & Accessories vi 7.1 Carrying Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182 7.1.1 Attaching The Hand Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183 7.1.2 Soft Shell Holster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183 7.2 7.3 7.4 The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184 Adaptor Cable Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184 Chargers And Docking Stations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184 7.4.1 Installation – Chargers And Docking Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185 7.4.2 Power Consumption Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185 7.4.3 Operator Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185 Warrington Hand-Held Computer User Manual Preliminary Draft 7.4.4 Contents Important Charger Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185 7.5 Desktop Docking Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186 7.5.1 Charging A Battery Installed In The Warrington. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188 7.5.2 Charging A Spare Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189 7.5.3 Battery Charge Duration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189 7.5.4 Charger LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189 7.5.5 Troubleshooting The Charging Operation Of The Dock . . . . . . . . . . . . . . . . . . . . . . .189 7.5.5.1 Excessive Charge Duration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189 7.5.5.2 Indicator Flashing Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190 7.5.5.3 Power LED Does Not Light Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190 7.5.5.4 Indicator Does Not Light When Battery Installed. . . . . . . . . . . . . . . . . . . .190 7.5.6 Linking A Warrington To A PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190 7.5.7 Linking A Warrington To An Ethernet Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191 7.5.7.1 Network Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191 7.5.8 Troubleshooting The Docking Station Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192 7.6 7.7 7.8 AC Wall Adaptor– Model No. PX3010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192 Automotive Power Adaptor—Model #WA3113-G2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193 Quad Docking Station – PX3004. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194 7.8.1 Quad Docking Station Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194 7.8.2 Quad Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194 7.8.3 Inserting A Warrington In The Quad Docking Station . . . . . . . . . . . . . . . . . . . . . . . . .195 7.8.4 Network Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195 7.8.4.1 Network Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195 7.8.5 Battery Charging – LED Behaviour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195 7.8.6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196 7.8.6.1 Network Link Unsuccessful . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196 7.8.6.2 Warrington LED Does Not Light When Docked. . . . . . . . . . . . . . . . . . . . .196 The Vehicle Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196 7.9.1 Vehicle Cradle Mounting Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197 7.9.1.1 Mounting Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197 7.9.2 Wiring Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197 7.9.3 Using The Vehicle Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198 7.9.4 Maintaining The Vehicle Cradle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198 7.9.5 Powered Cradle Installation In High Voltage Vehicles . . . . . . . . . . . . . . . . . . . . . . . . .198 7.9.6 Powered Vehicle Cradle Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199 7.9.6.1 Wiring Vehicle Power To The Cradle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199 7.9.7 The Port Replicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200 7.9 7.10 Scanners And Imagers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200 7.10.1 Scanning Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200 Warrington Hand-Held Computer User Manual vii Preliminary Draft Contents 7.10.2 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201 7.10.3 Operating One Dimensional (1D) Laser Scanners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201 7.11 Bluetooth Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202 Chapter 8: Specifications 8.1 Warrington Hand-Held Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205 8.1.1 Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205 8.1.2 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207 8.1.3 Wireless Communication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208 8.1.4 Bar Code Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208 8.1.5 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208 8.1.6 Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209 8.2 Warrington Radio Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209 8.2.1 802.11b/g Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209 8.2.2 Bluetooth Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210 8.3 Scanner/Imager Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210 8.3.1 SE 955HP Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210 8.3.1.1 SE 955HP Decode Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211 8.3.2 EV15 Imager Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211 8.3.2.1 EV15 Imager Decode Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212 Appendix A: Port Pinouts 1 A.1 A.2 viii Tether Port Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Battery 3000 mAh – WA3006: Contact Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warrington Hand-Held Computer User Manual Preliminary Draft APPROVALS & SAFETY SUMMARY 1.1 Declaration Of Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 Safety Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Warrington Hand-Held Computer User Manual Preliminary Draft Preliminary Draft 1.1 Chapter 1: Approvals & Safety Summary Declaration Of Conformity Declaration Of Conformity Declaration of Conformity documents are provided at: www.psionteklogix.com/DoC 1.2 Safety Summary When used in a residential, commercial or light industrial environment, the product and its approved UK and European peripherals fulfil all requirements for CE marking. R&TTE Directive 1999/5/EC This equipment complies with the essential requirements of EU Directive 1999/5/EC (Declaration available: www.psionteklogix.com/DoC). Cet équipement est conforme aux principales caractéristiques définies dans la Directive européenne RTTE 1999/5/CE. (Déclaration disponible sur le site: www.psionteklogix.com/DoC). Die Geräte erfüllen die grundlegenden Anforderungen der RTTE-Richtlinie (1999/5/EG). (Den Wortlaut der Richtlinie finden Sie unter: www.psionteklogix.com/DoC). Questa apparecchiatura è conforme ai requisiti essenziali della Direttiva Europea R&TTE 1999/5/CE. (Dichiarazione disponibile sul sito: www.psionteklogix.com/DoC). Este equipo cumple los requisitos principales de la Directiva 1995/5/CE de la UE, “Equipos de Terminales de Radio y Telecomu-nicaciones”. (Declaración disponible en: www.psionteklogix.com/DoC) Este equipamento cumpre os requisitos essenciais da Directiva 1999/5/CE do Parlamento Europeu e do Conselho (Directiva RTT). (Declaração disponível no endereço: www.psionteklogix.com/DoC). Ο εξοπλισμός αυτός πληροί τις βασικές απαιτήσεις της κοινοτικής οδηγίας EU R&TTE 1999/5/EΚ. (Η δήλωση συμμόρφωσης διατίθεται στη διεύθυνση: www.psionteklogix.com) Deze apparatuur voldoet aan de noodzakelijke vereisten van EU-richtlijn betreffende radioapparatuur en telecommunicatie-eindappa-ratuur 199/5/EG. (verklaring beschikbaar: www.psionteklogix.com/DoC). Dette udstyr opfylder de Væsentlige krav i EU's direktiv 1999/5/EC om Radio- og teleterminaludstyr. (Erklæring findes på: www.psionteklogix.com/DoC). Warrington Hand-Held Computer User Manual Chapter 1: Approvals & Safety Summary Safety Summary Preliminary Draft Dette utstyret er i overensstemmelse med hovedkravene i R&TTE-direktivet (1999/5/EC) fra EU. (Erklæring finnes på: www.psionteklogix.com/DoC). Utrustningen uppfyller kraven för EU-direktivet 1999/5/EC om ansluten teleutrustning och ömsesidigt erkännande av utrustningens överensstämmelse (R&TTE). (Förklaringen finns att läsa på: www.psionteklogix.com/DoC). Tämä laite vastaa EU:n radio- ja telepäätelaitedirektiivin (EU R&TTE Directive 1999/5/EC) vaatimuksia. (Julkilausuma nähtävillä osoitteessa: www.psionteklogix.com/DoC). PSION TEKLOGIX tímto prohlašuje, že tohle mobilní zařízení je ve shodě se základní mi požadavky a dalšími příslušnými ustanoveními směrnice 1995/5/ES (NV č. 426/2000 Sb.) a Prohlášení o shodě je k dispozici na www.psionteklogix.com/DoC. Toto za řízení lze provozovat v České republice na základě generální licence č. GL - 12/R/2000. PSION T EKLOGIX týmto vyhlasuje, že toto mobilné zariadenie spĺňa základné požia da vky a všetky príslušné ustanovenia Smernice 1995/ 5/ES (NV č . 443/2001 Z.z.) a Vyhlásenie o zhode je k dispozícii na www.psionteklogix.com/DoC. Toto za riadenie je možné prevádzkovať v Slove nskej republike na základe Všeobecného povolenia č. VPR-01/2001 Настоящото устройство е в съответствие с основните изисквания на европейската Директива 1999/5/EC (Декларацията за съответствие може да бъде намерена на адрес: www.psionteklogix.com/DoC) Acest echipament satisface cerinţele esenţiale ale Dire ctivei UE 1999/5/EC (Declaraţia poate fi gasitã pe site-ul: www.psionteklogix.com/DoC) Opre ma je skladna z bistvenimi zahtevami EU dire ktive 1999/5/ EC (De klaracija je na voljo: www.psionteklogix.com/DoC) Käesolev seade vastab EU Direktiivile 1999/5/EC (selgitus saadaval: www.psionteklogix.com/ DoC) Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 1: Approvals & Safety Summary Safety Summary Az eszköz megfelel az EU 1999/5/EC fő direktíváinak (a nyilatkozat megtalálható: www.psionteklogix.com/DoC) Šī aparatūra nodrošina ne pieciešamas ES Direktīvas prasības (De klarācija ir piee ja ma: www.psionteklogix.com/DoC) Įranga atitinka pa grindinius EU direktyvos 1999/5/EC reikalavimus (De klaraciją galima rasti www.psionte klogix.com/DoC) Dan l-apparat huwa konformi mal-kriterji tad-direttiva ta' l- EU 1999/5/EC. (Din id-dikjarazzjoni tista ssiba fuq is sit www.psionteklogix.com/DoC) To urządzenie spełnia wymagania zasadnicze dyr ektywy Unii Europejskiej 1999/5/EC (Deklarację zgodności można znaleźć pod adresem internetowym www.psionteklogix.com/DoC) Use of the 802.11 device in France: Owing to French Government restrictions, the 802.11 device is limited to indoor use. It may be used outdoors, on private property, only with prior authorization from the French Ministry of Defense. FCC Information To Users Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Warrington Hand-Held Computer User Manual Chapter 1: Approvals & Safety Summary Safety Summary Preliminary Draft • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by Psion Teklogix Inc. may void the FCC authorization to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment under 47 CFR 2.1093 paragraph (d)(2). End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Some equipment in hospitals and aircraft are not shielded from radio frequency energy. Do not use the hand-held onboard aircraft, or in hospitals, without first obtaining permission. Do not use near pacemakers. The Warrington may affect the operation of some medically implanted devices such as pacemakers, causing them to malfunction. Avoid placing your Warrington next to such devices. Keep a minimum distance of 20 cm between the medical device and the Warrington to reduce the risk of interference. If you have any reason to suspect that interference is taking place, turn off the Warrington and contact your medical specialist for assistance. Note: To maintain compliance with the FCC RF exposure guidelines, if you wear the device on your body, use the Psion Teklogix approved carrying case. Use of non-approved accessories may violate FCC RF exposure guidelines. Emissions Information For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations (ICES-003). When using the 802.11 radio option, to prevent radio interference, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 1: Approvals & Safety Summary Safety Summary Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada (ICES-003). En cas d’utilisation du module radio 802.11, afin d'éviter toute interférence radio avec le service autorisé, l'appareil doit être utilisé à l'intérieur, tout en tant éloigné de toute fenêtre afin de garantir le maximum de protection. Si cet équipement (ou son antenne émettrice) est installé à l'extérieur, il est alors soumis à licence. Warrington Hand-Held Computer User Manual Preliminary Draft Preliminary Draft INTRODUCTION 2.1 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.2 Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.3 Warrington Hand-Held Computer Features . . . . . . . . . . . . . . . . . . . . . . 12 Warrington Hand-Held Computer User Manual Preliminary Draft Preliminary Draft 2.1 Chapter 2: Introduction About This Manual About This Manual This manual describes how to configure, operate and maintain the Warrington hand-held computer. Chapter 1: Approvals & Safety Summary provides approval and safety information such as FCC radiation and Canadian emission details, CE warnings, R&TTE directives, and so one. Chapter 2: Introduction provides a basic overview of the Warrington. Chapter 3: Basic Checkout describes the steps required to get the Warrington ready for operation, including setting up the 802.11b/g radio. Chapter 5: Getting To Know The Warrington describes Warrington features and outlines how to charge and maintain the battery. This chapter also provides a description of the keyboards, how to navigate in Microsoft Windows CE 5.0, and so on. Chapter 4: Working With Windows CE 5.0 describes the Microsoft Windows CE 5.0 desktop and how to use it. This chapter also outlines the basics of moving around a Windows CE 5.0 window, selecting and opening icons, files, folders and working with a Windows dialog box. Chapter 6: Configuration describes the Windows CE 5.0 Control Panel and how to use it to configure the Warrington, along with the scanners attached to the hand-held, and so on. Chapter 7: Peripheral Devices & Accessories describes the peripherals and accessories available for your Warrington. Chapter 8: Specifications lists hand-held, radio, scanner, and battery specifications. Appendix A: Port Pinouts describes Warrington pinouts. 2.2 Text Conventions Note: Notes highlight additional helpful information. Warrington Hand-Held Computer User Manual 11 Chapter 2: Introduction Warrington Hand-Held Computer Features Preliminary Draft Important: These statements provide particularly important instructions or additional information that is critical to the operation of the equipment. Warning: These statements provide critical information that may prevent physical injury, equipment damage or data loss. 2.3 Warrington Hand-Held Computer Features Important: For all safety, regulatory and warranty information, refer Chapter 1: “Approvals & Safety Summary”. The Warrington is a compact, ruggedized hand-held running the Microsoft Windows CE 5.0 operating system. It is intended for use in commercial and light industrial applications. The Warrington can be ordered with or without a radio. Without a radio, it operates as a batch or unconnected computer. With a radio installed, the Warrington operates as a connected computer, delivering real time wireless data transactions. All possible bar code input methodologies are supported by the scanner and imager available with this hand-held. Optimization for specific operational environments is supported with a wide range of peripheral options and carrying accessories. The unique tilted screen design on this hand-held makes the display content readily visible. It means that the operator can scan a bar code and view the results on the display in one movement – no need to manually tilt the unit to view the results after each scan. In addition, the tilted screen in conjunction with the protective rib at the base of the keyboard allows the unit to be placed facedown safely with no danger of an accidental key press. Note: For complete Warrington hand-held computer specifications, refer to “Specifications” on page 203. 12 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 2: Introduction Warrington Hand-Held Computer Features Figure 2.1 Warrington Hand-Held Computer - Numeric & Alpha-Numeric Model Variants Connected Warrington Standard Features: • • • • • • • 2.7 inch colour touchscreen CE .Net Pro 64/128 MB Memory Micro SD slot 3000 mAh Battery VoIP (Push-To-Talk) WiFi/Bluetooth Radio Warrington Hand-Held Computer User Manual 13 Chapter 2: Introduction Warrington Hand-Held Computer Features Preliminary Draft Additional Options: • • • 1D Imager 1D Laser Scanner Keyboard Variants: 48-Key Alpha-Numeric or 26-Key Numeric Batch Warrington Standard Features: • • • • • • 2.7 inch Colour Touchscreen Numeric Keypad CE .Net Core 64/128 MB Memory Micro SD Slot 3000 mAh Battery Additional Options: • • • Bluetooth Radio Bluetooth Radio and 1D Imager Bluetooth Radio and 1D Laser Scanner Platform • • Processor: PXA270 Processor @ 312 Mhz Memory: - On-board RAM: 128 MB SDRAM - On-board ROM: 64 MB Flash Operating System • Microsoft® Windows® CE 5.0 Programming Environment • • HTML, XML Mobile Devices SDK - CE.NET SDK: - Java Visual C++ - Standard protocol APIs – Windows® sockets (WinCE) Wireless Communications • 14 On-board IEEE 802.11b/g (CCX Certified) Warrington Hand-Held Computer User Manual Preliminary Draft • Chapter 2: Introduction Warrington Hand-Held Computer Features On-board Bluetooth radio (10 meter range) Application Software • • • • • • • • • • • Internet Explorer® 6 for CE Wordpad ActiveSync Open TekTerm ANSI TESS terminal emulations IBM 3270, IBM 5250, HP 2392 Wavelink® MCL MCC PCX Connect (Push-To-Talk) Bar Code Applications • • 1D Standard Laser Scanner Option – SE955 1D Standard Imager Option – EV15 User Interface • Display: - 1/4 VGA portrait mode - Tilted screen for clear view of display content, even while scanning a bar code - Sunlight readable with transmissive touchscreen - Colour 240 x 320 graphic TFT - Passive stylus or finger operation - Multicolour LED for scanning • Keypad: - 48-key alpha-numeric (Not available for Unconnected batch model variants.) - 26-key numeric - LED backlit keypad - Ergonomically enhanced for ambidextrous one-hand operation • Audio Warrington Hand-Held Computer User Manual 15 Chapter 2: Introduction Warrington Hand-Held Computer Features Preliminary Draft - Built-in microphone and receiver on all ‘Connected’ variants - 85 dB internal beeper Bluetooth® Class II, Ver 2 Note: Bluetooth radios are a standard in all units equipped with 802.11b/g radios. For those units operating in batch mode (off-line data collection) Bluetooth installation is optional. • • • Working Range: 5 m to 10 m (16.4 ft.to 32.81 ft.) Supports Enhanced Data Rate (EDR) for up to 3 Mbps data rate Supports Advanced Frequency Hopping (AFH) for reduced interference with 802.11b/g radio Note: 802.11b/g and Bluetooth are available simultaneously. Expansion Ports • • RS232 Serial USB host Power Management • • • • • • • 3.7 V @ 3000 mAh Lithium-Ion rechargeable battery 8 hour battery operation Smart battery system level 3 compliant Built-in gas gauge and performance monitor System backup (u to 10 minutes) during battery swap 3 Day real time clock backup Adjustable battery allocation between system backup and runtime User Environment • • • • • • 16 Operating Temperature: -10 °C to 50 °C (14 °F to 122 °F) Storage Temperature: -20 °C to 60 °C (13 °F to 140 °F) Relative Humidity: 5% to 95% RH non-condensing Rain and Dust Protection: IP54, IEC 529 Drop: 1.2 meters (4 feet) – 26 drops to polished concrete Shock and Vibe: 5-400 Hz PSD (random) and 30 g (3 axis) Warrington Hand-Held Computer User Manual Preliminary Draft • Chapter 2: Introduction Warrington Hand-Held Computer Features ESD: ±15 k Vdc air discharge, ± 8 k Vdc contacts Physical Dimensions And Weight • • 168 mm x 64 mm x 34 mm Weight with battery: 270 g Accessories • • • Desktop charger Quad charger Additional miscellaneous adaptors and cables (a complete list of accessories is available at www.psionteklogix.com Warrington Hand-Held Computer User Manual 17 Preliminary Draft Preliminary Draft BASIC CHECKOUT 3.1 Preparing The Warrington Hand-Held For Operation . . . . 3.1.1 The Battery . . . . . . . . . . . . . . . . . . . . . 3.1.1.1 Charging The Main Battery . . . . . . . . 3.1.2 The Super Capacitor . . . . . . . . . . . . . . . . 3.2 Switching The Warrington On And Off . . . . . . . . . . . 3.2.1 Installing The Battery And Switching The Unit On 3.2.2 Switching The Unit Off (Suspend) . . . . . . . . . 3.3 Calibrating The Touchscreen . . . . . . . . . . . . . . . . . 21 21 21 21 22 22 22 22 3.4 Configuring The Murata 802.11b/g Radio . . . . . 3.4.1 Assigning An IP Address. . . . . . . . . 3.4.2 Name Servers Tab . . . . . . . . . . . . 3.4.3 Advanced Features . . . . . . . . . . . . 3.4.3.1 Rearranging Preferred Networks 3.4.3.2 Deleting A Preferred Network . 3.4.3.3 Changing Network Properties. . 3.5 Checking The Scanner . . . . . . . . . . . . . . . 23 28 30 30 31 31 31 32 3.6 Data Transfer Between The PC And The Hand-Held 3.6.1 Using Microsoft ActiveSync . . . . . . . . 3.6.2 Using Microsoft Vista . . . . . . . . . . . 3.7 VoIP – Using Push-To-Talk . . . . . . . . . . . . . 32 32 32 33 3.8 Resetting The Warrington . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 3.8.1 Performing A Warm Reset . . . . . . . . . . . . . . . . . . . . . . . . . . 33 3.8.2 Performing A Cold Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Warrington Hand-Held Computer User Manual 19 Preliminary Draft Preliminary Draft Chapter 3: Basic Checkout Preparing The Warrington Hand-Held For Operation 3.1 Preparing The Warrington Hand-Held For Operation 3.1.1 The Battery The Warrington is powered with a 3000 mAh Lithium Ion battery pack – Model No. WA3006. Warning: Before charging the battery, it is critical that you review the battery safety guidelines in Chapter 1: “Approvals & Safety Summary”. 3.1.1.1 Charging The Main Battery Important: Before opening the battery cover on your Warrington, press [FN/BLUE] [ENTER] to turn off the hand-held. Removing the battery while the unit is running may cause the hand-held to reboot. Battery packs shipped from the factory are charged to approximately 40% and must be fully charged prior to use. Batteries can be charged using a variety of chargers and docking stations along with a Warrington internal charger. When using the internal charger, a suitable power source is required. All chargers and docking stations are described in Chapter 7: “Peripheral Devices & Accessories” beginning on page 184. Note: If you are powering up a new unit, a warning message may appear on the screen indicating that the backup battery capacity is low. To recharge the internal battery, you must fully charge the Warrington with the main battery installed in the unit. 3.1.2 The Super Capacitor An onboard super capacitor provides up to 10 minutes of suspend mode backup power to the Warrington to give you time to swap in a new battery; all unnecessary draws on power such as the display and CPU are shut down to preserve power. Important: When you initially power up the hand-held, leave the battery in the unit for a minimum of 2 minutes to allow the super capacitor to reach full capacity. If the battery pack reaches its Suspend Threshold (refer to “Suspend Threshold” on page 102) and the hand-held shuts down, the super capacitor will protect the data stored in the unit until a charged battery pack is installed. Warrington Hand-Held Computer User Manual 21 Chapter 3: Basic Checkout Switching The Warrington On And Off Preliminary Draft 3.2 Switching The Warrington On And Off 3.2.1 Installing The Battery And Switching The Unit On Important: Press [FN/BLUE] [ENTER] to turn off the hand-held before removing battery on your Warrington. If the battery is removed while the unit is still powered on, the unit may reboot. • • • Push the release button at the base of the battery cover to unlatch it. Remove the battery cover. Insert a charged battery into the unit, making certain that the connectors on the battery are aligned with those in the Warrington battery well. Replace the battery cover. Note: If you are using a docking station or an external power supply, you can insert an uncharged battery and switch it on. To switch the Warrington on: • Press and hold down the [ENTER] key for at least one second. • When the LED flashes green, release the [ENTER] button. The desktop screen is displayed. Note: If the unit was already in use—the unit may be off (suspend state) – pressing [ENTER] ‘wakes’ the unit from this state. The screen in which you were working prior to the suspend state is displayed. 3.2.2 Switching The Unit Off (Suspend) • 3.3 Press the [FN/BLUE] key, and then press [ENTER]. Calibrating The Touchscreen Note: Keep in mind that the touchscreen function can be turned off (see “Touch” on page 105). The Warrington touchscreen is factory-calibrated and ready-to-go; however, over time the touchscreen operating parameters may change, and may need to be recalibrated for correct operation. Refer to “Calibrating The Touchscreen” on page 65 for details. 22 Warrington Hand-Held Computer User Manual Preliminary Draft 3.4 Chapter 3: Basic Checkout Configuring The Murata 802.11b/g Radio Configuring The Murata 802.11b/g Radio The Warrington supports a Murata Direct Sequence Spread Spectrum 802.11b/g radio module. The radio is mounted on the hand-held logic board. The most common 802.11 settings are configured as defaults. However, there are some fields that must be completed, including the SSID of your access point and the security methods implemented in the network (including access keys). Note: In most situations, the configuration of your 802.11 radio will require parameter setting and access keys from a network administrator. Network administrators should review the detailed security information in this section in order to effectively configure the 802.11 wireless network. To configure the 802.11 radio: 1. Tap on Start>Settings>Network and Dial-up Connections. 2. Choose the radio icon to open the 802.11 Wireless LAN Settings window. Warrington Hand-Held Computer User Manual 23 Chapter 3: Basic Checkout Configuring The Murata 802.11b/g Radio Preliminary Draft Figure 3.1 802.11 Wireless LAN Settings Window 3. Wireless Statistics Tab: When you choose the Wireless LAN icon, an 802.11 Wireless LAN Settings window is displayed. This tab lists your radio statistics. Choosing the Zero button resets the statistics of the last four items – Packets IN, Packets OUT, IN errors and OUT errors. Figure 3.2 Wireless Statistics • Tap on the arrow in the upper-right corner of the dialog box to display the next tab – Wireless Information. 4. Wireless Information Tab: This tab displays existing networks to which you can connect, and it allows you to add a new network or modify the settings for an existing network. 24 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 3: Basic Checkout Configuring The Murata 802.11b/g Radio Note: Configure button – To change the settings in an existing network, highlight the network you want to modify, and tap on the Configure button to display the Wireless Properties dialog box. Connect button – To force connection to a specific, existing network, highlight the network to which you want your Warrington to connect, and tap on the Connect button Figure 3.3 Wireless Information Tab This tab lists available networks – any access points that are broadcasting an SSID, and it lists preferred networks – networks that you have configured. Since access points are generally secure, they will most likely not be listed here. By default, Warrington attempts to connect to preferred networks. This behaviour can be changed by enabling Automatically connect to non-preferred networks in the Advanced dialog box (see Figure 3.8 on page 31). • To add a new configuration, tap on the Add New button. A blank Wireless Properties dialog box is displayed. 5. Wireless Properties: Warrington Hand-Held Computer User Manual 25 Chapter 3: Basic Checkout Configuring The Murata 802.11b/g Radio Preliminary Draft Figure 3.4 Wireless Properties Dialog Box • Network name (SSID): Type the appropriate SSID (Service Set Identifier) in the Network name (SSID) text box at the top of this dialog box. The Network name field can contain a maximum of 32 characters. The name assigned here is listed as a preferred network. Important: Keep in mind that the Warrington will only communicate with access points that are configured with the same SSID. • Ad Hoc And Infrastructure: If you are using an Infrastructure network – one in which Warringtons must pass data through an access point – leave the checkbox next to This is an ad hoc network blank. If you are using an Ad Hoc network – a network in which Warringtons pass data directly to other Warringtons without an access point – add a checkmark in the checkbox next to This is an ad hoc network to enable Ad Hoc. Encryption: WEP (Wired-Equivalent Privacy) encryption prevents others from accidentally accessing your network. If you are not using encryption, you can choose Disabled from the dropdown encryption menu. Otherwise, leave this field as is. Note: WEP cannot be disabled if you are using WPA or WPA-PSK authentication. TKIP (Temporal Key Integrity Protocol) is an encryption protocol included as part of the IEEE 802.11 standard for wireless LANs. Designed to enhance WEP, TKIP uses 26 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 3: Basic Checkout Configuring The Murata 802.11b/g Radio the original WEP encryption but ‘wraps’ additional code at the beginning and end to encapsulate and modify it, encrypting each data packet with a unique encryption key. • Authentication: 802.11 supports four subtypes of network authentication services: Open, Shared, WPA, and WPA-PSK. Under Open authentication, any wireless station can request authentication. The station that needs to authenticate with another wireless station sends an authentication management frame that contains the identity of the sending station. The receiving station then sends back a frame that indicates whether it recognizes the identity of the sending station. Under Shared authentication, each wireless station is assumed to have received a secret shared key over a secure channel that is independent from the 802.11 wireless network communications channel. Under WPA and WPA-PSK authentication, the use of 802.1x authentication is required. For wireless networks without a Remote Authentication Dial-In User Service (RADIUS) infrastructure, WPA supports the use of a preshared key. For wireless networks with a RADIUS infrastructure, Extensible Authentication Protocol (EAP) and RADIUS is supported. • Network Key: This text box is used to specify a 5 or 13 ASCII character sequence or an equivalent 10 or 26 Hexadecimal digit sequence that matches the active WEP key on the access point. • To assign a Network key, highlight The key is provided automatically, and uncheck the checkbox to disable this option Figure 3.5 Accessing Network Key and Key Index • Key Index: This field is used to identify the WEP key. Enter a value from 1 to 4. Warrington Hand-Held Computer User Manual 27 Chapter 3: Basic Checkout Assigning An IP Address Preliminary Draft • Enable 802.1x authentication: 802.1X is the IEEE standard that offers additional security for local area networks. It provides authentication for user devices attached to an Ethernet network, whether wired or wireless. A security protocol packet such as TLS or MD5 encapsulated in an EAP is used in conjunction with the 802.1X standard to authenticate users at the MAC layer. Available EAPs are listed in the dropdown menu next to the EAP option. To activate 802.1X, highlight 802.1x authentication, and check the checkbox. • EAP Type (Extensible Authentication Protocol): This dropdown menu lists the EAP types available on your system. The items in this dropdown menu will vary depending on your network setup. Keep in mind also that some authentication protocols require that you select a Certificate. By selecting the Properties button, you will be able to select a Certificate. “Certificate Assignment” on page 109 provides a website that outlines how to create certificates for your network. 6. Saving and exiting the radio setup. Once you’ve completed the configuration, press [ENTER], or tap on OK. The connection you created will be listed in the Wireless Information tab as a preferred network. The radio will search for the SSID and will compare the WEP and authentication information you specified. If there is a match between your hand-held settings and the access point settings, the hand-held will communicate on the network through the access point. 3.4.1 Assigning An IP Address If your network is not using a DHCP server, you will need to assign an IP address. • 28 Tap on the IP Information tab. Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 3: Basic Checkout Assigning An IP Address Figure 3.6 IP Information Note: Tapping the Renew button forces the Warrington to renew or find a new IP address. This is useful if, for example, you are out of communication range for a longer period of time and your hand-held is dropped from the network. To define a static IP address: • Tap on the Configure button. • • Tap the stylus on the radio button next to Specify an IP address to select it. Type an IP, Subnet Mask and Default Gateway address in the appropriate fields. Press [ENTER] to save your information. Warrington Hand-Held Computer User Manual 29 Chapter 3: Basic Checkout Name Servers Tab 3.4.2 Preliminary Draft Name Servers Tab Note: If DHCP is enabled, name server addresses are assigned automatically. • • • In the PTXCF8385P N1 Settings window, tap on the IP Information tab. Tap on the Configure button. Display the Name Servers tab Figure 3.7 Name Servers Tab • The DNS and WINS fields in the Name Servers tab allow you to specify additional WINS and DNS resolvers. The format for these fields is ###.###.###.###. 3.4.3 Advanced Features To display the Advanced Wireless Settings dialog box: • Tap on the Advanced button in the Wireless Information tab. (Refer to Figure 3.3 on page 25.) This window lists the available preferred networks. 30 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 3: Basic Checkout Rearranging Preferred Networks Figure 3.8 Advanced Settings 3.4.3.1 Rearranging Preferred Networks The Warrington attempts to connect with the networks listed in this dialog box in sequence, beginning at the top of the list. If you need to rearrange this list of networks – move networks up and down in the list: • • Tap in the Networks List, and highlight the network that you want to move up or down in the list. To move the highlighted item in the list upward or downward, tap on the Up or Down button. 3.4.3.2 Deleting A Preferred Network To delete a network from this list: • • In the networks list, highlight the network that you want to remove. Tap on the Delete button. 3.4.3.3 Changing Network Properties To change the properties of an existing preferred network: • • • Highlight the network that you want to modify. Tap on the Properties button. Make any necessary changes in the Wireless Properties dialog box, and press [ENTER] to save the changes. Warrington Hand-Held Computer User Manual 31 Chapter 3: Basic Checkout Checking The Scanner 3.5 Preliminary Draft Checking The Scanner If your Warrington is equipped with an internal scanner, you can test it to ensure that it is operating properly. Point the scanner window at a bar code that your scanner was designed to decode—for example, a 1D UPC bar code. Press the SCAN key or pistol trigger, and check for a valid decode on the hand-held screen. Performance is improved if you disable all unneeded bar codes in the Bar Codes screen. Review “Scanner Settings” on page 134 or details about bar codes. 3.6 Data Transfer Between The PC And The Hand-Held Data transfer options vary slightly depending on the type of operating system installed in your PC. Microsoft® ActiveSync® is PC connectivity software that can be used to connect your hand-held to PCs running this software. ActiveSync works only with the Windows XP SP2 operating system or earlier. If the Microsoft® Vista® operating system is installed in your PC, ActiveSync is not required to transfer data between your Warrington and your PC. By connecting the Warrington to a PC with a cable, you can: • • • 3.6.1 View Warrington files from Windows Explorer. Drag and drop files between the Warrington and the PC in the same way that you would between PC drives. Back up Warrington files to the PC, then restore them from the PC to the hand-held again, if needed, and so on. Using Microsoft ActiveSync To install ActiveSync, follow the step-by-step instructions provided with the program’s setup wizard. Refer to the following website for details: http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx 3.6.2 Using Microsoft Vista If you have Windows Vista, your Warrington data transfers do not require ActiveSync. To transfer data between your PC and your hand-held: • • 32 Tap on Start>Computer to display the drives. Your Warrington will be visible here. Open drives, files and folders as you would on your PC. Warrington Hand-Held Computer User Manual Preliminary Draft 3.7 Chapter 3: Basic Checkout VoIP – Using Push-To-Talk VoIP – Using Push-To-Talk • • • 3.8 Resetting The Warrington 3.8.1 Performing A Warm Reset To execute a warm reset: • Press and hold down the [FN/BLUE] key and the [ENTER] key simultaneously for a minimum of six seconds. A warm reset closes open applications; any unsaved data are lost. Installed programs and saved data are preserved. Note: You do not need to reset your Warrington after configuring the radio. 3.8.2 Performing A Cold Reset To perform a cold reset and launch the Windows 5.0 operating system (bypassing the BooSt menu): • Press and hold down the [FN/BLUE] [FN/ORANGE] and [ENTER] keys simultaneously for a minimum of six seconds. Warrington Hand-Held Computer User Manual 33 Preliminary Draft Preliminary Draft WORKING WITH WINDOWS CE 5.0 4.1 Navigating In Windows CE 5.0 . . . . . . . . . . . . 4.1.1 Navigating Using A Touchscreen And Stylus 4.1.2 Navigating Using The Keyboard. . . . . . . 4.2 Working With Files, Folders And Programs . . . . . . 37 37 37 38 4.3 The Startup Desktop . . . . . . . . . . . . . 4.3.1 The Desktop Icons . . . . . . . . . 4.3.2 The Taskbar. . . . . . . . . . . . . 4.3.2.1 Using The Taskbar . . . . 4.3.2.2 Customizing The Taskbar . 4.4 The Start Menu . . . . . . . . . . . . . . . . 4.4.1 The Desktop . . . . . . . . . . . . 4.4.2 Security Settings . . . . . . . . . . 4.4.3 Programs . . . . . . . . . . . . . . 4.4.4 Shortcuts . . . . . . . . . . . . . . 4.4.5 Settings . . . . . . . . . . . . . . . 4.4.6 Run . . . . . . . . . . . . . . . . . 4.4.7 Shutdown . . . . . . . . . . . . . . 4.5 Using A Dialog Box . . . . . . . . . . . . . 39 40 41 41 42 43 45 45 46 48 50 50 51 52 Warrington Hand-Held Computer User Manual 35 Preliminary Draft Preliminary Draft 4.1 Chapter 4: Working With Windows CE 5.0 Navigating In Windows CE 5.0 Navigating In Windows CE 5.0 Note: In order to access many of the menus discussed in this chapter, the security level must be set to ‘Supervisor’ (see “Security Settings” on page 45). Graphic user interfaces like Windows CE 5.0 for portable devices and desktop Windows (2000, XP, etc.) utilize ‘point and click’ navigation. An equivalent keyboard shortcut is also available for every ‘point and click’ action. Windows CE 5.0 supports the same ‘point and click’ user interface and keyboard shortcuts as desktop Windows with one difference—the ‘point and click’ action is accomplished using a touchscreen rather than a mouse. Actions can be performed using any combination of keyboard shortcuts or touchscreen tapping. 4.1.1 Navigating Using A Touchscreen And Stylus Note: If the touchscreen is not registering your screen taps accurately, the touchscreen may need recalibration. Refer to “Calibrating The Touchscreen” on page 65. Each Warrington is equipped with a stylus—a pointing tool that looks like a pen—stored in a slot at the top of the unit. The stylus is used to select objects on the touchscreen. Note: To prevent damage to the touchscreen, use only the stylus (pen) supplied with your Warrington. To choose an icon, open a file, launch an applet, or open a folder: • 4.1.2 Double-tap the stylus on the appropriate icon. Navigating Using The Keyboard If your Warrington touchscreen has been disabled, you can use the keyboard to choose icons, navigate dialog boxes, display the desktop, and so on. If your unit has already been fully configured and your application is launched at startup, you’ll have little need for keyboard navigation, but you can refer to Table 4.1 for a description of the navigation keys. Table 4.1 Keyboard Navigation Operation Key or Key Combination Switch between active applications [ALT] [TAB] Open task manager [ALT] [ESC] Warrington Hand-Held Computer User Manual 37 Chapter 4: Working With Windows CE 5.0 Working With Files, Folders And Programs Preliminary Draft Table 4.1 Keyboard Navigation Operation Key or Key Combination Move the cursor Arrow keys Open file, folder or icon [ENTER] Exit & Save [ENTER] Close/Exit & Do Not Save [ESC] Navigate Dialog Boxes [TAB] To move cursor up: [SHIFT] [TAB] To display the contents of the next ‘tab’ in a dialog box: [CTRL] [TAB] Select Radio Button/Press Button [SPACE] Go to Start Menu [FN/BLUE][0] Keep in mind that unlike a desktop computer, the Warrington does not support key chording (pressing two keys at the same time). You must press one key followed by the next in sequence. Refer to Section 4.2: “Working With Files, Folders And Programs” for additional details about keyboard navigation. 4.2 Working With Files, Folders And Programs Figure 4.1 Working With Windows Icons Folder Program Icon File 38 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 4: Working With Windows CE 5.0 The Startup Desktop • Double-tap on the appropriate icon—either a folder icon, a program icon or a file icon—to open or launch your selection. If you’re using the keyboard: • • 4.3 Use the arrow keys to highlight the icon you want to open or launch. Press [ENTER]. The Startup Desktop When the Warrington boots up, the startup desktop (shell) is displayed. Any applications stored in the Startup folder start up immediately. Note: The startup folder is located in \Windows\StartUp and \Flash Disk\StartUp. Figure 4.2 The Warrington Startup Desktop To access desktop icons: • Double-tap on the icon to open a window or, in the case of an application icon, launch an application. On the keyboard: • Use the arrow keys to highlight the icon, and press [ENTER] to launch the highlighted icon. Warrington Hand-Held Computer User Manual 39 Chapter 4: Working With Windows CE 5.0 The Desktop Icons Preliminary Draft Note: If the arrow keys do not highlight the desktop icons, the desktop may not be selected. Press [FN/BLUE] [.] (period) to display the Start Menu, and select Desktop. Now the desktop will be “in focus” and the arrow keys will highlight the icons. 4.3.1 The Desktop Icons The icons displayed in the startup desktop operate in much the same way as those displayed on any standard PC desktop that is running Windows. My Device Choosing this icon displays the contents of your Warrington computer. If you’re not sure how to access the files, folders and programs displayed, refer to “Working With Files, Folders And Programs” on page 38. Recycle Bin This option temporarily stores items that were deleted, allowing you to either permanently delete or restore these items. Internet Explorer Choosing this icon launches Internet Explorer—a standard Windows CE 5.0 version. Keep in mind that your supervisor will need to set up access using the Internet Options and the Network and Dial-up Connections icons in the Control Panel. Remote Desktop Connection This option allows your Warrington to communicate with a remote desktop PC. “Remote Connect” on page 79 provides a website with step-by-step instructions. 40 Warrington Hand-Held Computer User Manual Preliminary Draft 4.3.2 Chapter 4: Working With Windows CE 5.0 The Taskbar The Taskbar The Warrington is equipped with a taskbar at the bottom of the screen. It displays icons through which you can view the battery capacity and radio signal quality of your unit. If the hand-held is attached to a charger, cradle, docking station or PDM, an associated icon is displayed. In addition, the taskbar displays the application(s) currently running on your unit and the security level assigned to your Warrington. The taskbar also displays active modifier keys: [SHIFT], [ALT], [CTRL], [FN/BLUE] and [FN/ORANGE]. Keys that have been locked “on” are displayed in uppercase letters. For example, if you have set the [CTRL] key Lock to “on” in the Keyboard menu and you press the key, it is displayed as CTRL KEY in the taskbar. (For detailed information on modifier keys and keyboard options, see “The Keyboard” on page 60). 4.3.2.1 Using The Taskbar A tooltip is displayed as each taskbar icon is highlighted. The tooltip provides the status of each icon. If you’re using the touchscreen: • Tap and hold the stylus on an icon to display the icon's tooltip. Double-tap the icon to open the Control Panel dialog box associated with the icon. For example, double-tap the battery icon to display a dialog box listing the current battery capacity information. On the keyboard: • • Press [FN/BLUE] [.] (period) to display the Start Menu. Choose Shortcuts from the Start Menu, and then press the [RIGHT] arrow key to display the sub-menu. Warrington Hand-Held Computer User Manual 41 Chapter 4: Working With Windows CE 5.0 Customizing The Taskbar • • • Preliminary Draft Choose System Tray in the sub-menu. Use the arrow keys to highlight the icon in the taskbar about which you’d like more information. Press [ENTER] to display the appropriate dialog box. 4.3.2.2 Customizing The Taskbar To customize the taskbar so that it displays only those icons you require: • In the Start Menu, choose Settings>Taskbar. If you’re using the keyboard: • Press [FN/BLUE] [.] to display the Start Menu. • Highlight the Settings option, highlight Taskbar in the sub-menu, and press [ENTER]. The Taskbar and Start Menu dialog box is displayed. Taskbar General Tab • Tap the stylus on the items you want to activate or deactivate. The check mark indicates active items. If you’re using the keyboard: • 42 Highlight the options you want to activate, and press the [SPACE] key to select them. The check mark indicates active items. Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 4: Working With Windows CE 5.0 The Start Menu Taskbar Advanced Tab • • Tap on the Clear button to empty the Documents folder. To display Control Panel applets in menu form rather than in a window, tap in the checkbox next to Expand Control Panel. Taskbar Security Tab If you check Disable hot keys, the Application from Start menu field becomes enabled. Use this field to enter the name of the application you want to run when the user presses the Menu hot key: [FN/BLUE] [0]. If you have disabled hot keys, hidden the Start Menu and have no application configured, the Menu hot key brings up the Security dialog box to allow authorized users to access the hand-held configuration. Keep in mind that this dialog box is also displayed if an invalid application is entered in the Application from Start Menu field. 4.4 The Start Menu Note: Some of the Start Menu items may be disabled based on the current Warrington security settings. Warrington Hand-Held Computer User Manual 43 Chapter 4: Working With Windows CE 5.0 The Start Menu Preliminary Draft The Start Menu lists the operations you can access and work with. It is available from the startup desktop or from within any application. To display the menu: • Press [FN/BLUE] [.] (period). Note: Tap on the item in the menu with which you want to work. If you’re using the keyboard: • Use the arrow keys to highlight a menu item, and press [ENTER], or If the menu item has an underlined character: • 44 Type the underlined alpha character. For example, to display the Security dialog box, type the letter ‘s’. Warrington Hand-Held Computer User Manual Preliminary Draft 4.4.1 Chapter 4: Working With Windows CE 5.0 The Desktop The Desktop Choosing Desktop in the Start Menu displays the Warrington desktop. 4.4.2 Security Settings Choosing the Security option from the Start Menu displays a dialog box in which you can define the access level for the Warrington: Supervisor or User. Figure 4.3 Security Levels Assigning The Supervisor Security Level The security level is represented by an icon in the shape of a lock in the taskbar. The security levels define the options accessible to the operator in the Start Menu and the taskbar. By default, the security level is set to User, restricting access to only the most basic Start Menu items. To allow access to all the Start Menu and taskbar options: • In the Security Level dialog box, tap on the radio button next to Supervisor. Warrington Hand-Held Computer User Manual 45 Chapter 4: Working With Windows CE 5.0 Programs • • Preliminary Draft In the Password field, type the Supervisor level password. The default password is 123456. Tap on OK. You can now access all menu items in the Start Menu along with the icons in the taskbar. Changing A Password Note: Keep in mind that this is the same password as that assigned through the Password control panel applet. Refer to “Control Panel Icons” on page 80. To assign a password: • Choose a security level, and enter the existing password in the Password field. • Tap on the Set Password button. A dialog box labelled Password Properties is displayed. • • Type the new password in the Password: text box (all keyboard characters are valid). In the Confirm Password: text box, retype the new password. Configuring Security Choosing the Configure button displays the Configure Security dialog box. This dialog box allows you to determine which security levels will have an associated icon displayed in the taskbar. By default, a security icon is not displayed for user-level security. Note: It is recommended that you enable ‘Allow Teklogix Security Level’ so that authorized Psion Teklogix service personnel can access your unit should it require maintenance. 4.4.3 Programs • 46 Choose Programs to display a sub-menu of options. Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 4: Working With Windows CE 5.0 Programs Figure 4.4 Programs Sub-Menu ActiveSync® This option allows you to connect to another device using ActiveSync. Demo This folder contains the Demo Scanner, Demo Signature and Demo Sound applications. Demo Scanner can be used to test how the hand-held reads and writes RFID tags. Demo Signature allows you to capture a signature written on the screen with your stylus and save it to a file. Demo Sound allows you to record and playback. The ‘Sample Rate’ and the ‘Bits Per Sample’ are the rates at which the sound will be recorded. Sounds recorded at the higher sample rate or bits per sample will be higher quality sound but will require more file storage space. Lower sample rates and/or bits per sample produces a smaller file, but the sound quality suffers. The record and play buttons operate in the same as on any recording device. The X icon deletes the sound and the diskette icon allows you to save your sound. Command Prompt Command Prompt is used to access the DOS command prompt. At the prompt, you can type DOS commands such as dir to display all the directories in the drive. Internet Explorer The Warrington is equipped with Microsoft Internet Explorer for Windows CE 5.0. You can access the Internet Options icon through the Start Menu under Settings>Control Panel or by double-tapping on the desktop Internet Explorer icon. Warrington Hand-Held Computer User Manual 47 Chapter 4: Working With Windows CE 5.0 Shortcuts Preliminary Draft Microsoft WordPad The Microsoft WordPad is a basic word processor used to create, edit, view and print text documents. You can access this option from the Start Menu under Programs> Microsoft WordPad. Remote Connect Remote Connect is a Warrington application used to connect to a Windows Terminal Server so that you can run a “session” on the Server machine using the Warrington (Windows CE 5.0 device). “Remote Connect” on page 79 provides a website with details about this option. Windows Explorer The Windows Explorer installed on your Warrington is consistent with all Windows CE 5.0 devices. You can access this option from the Start Menu under Programs> Windows Explorer. 4.4.4 Shortcuts System Tray If your touchscreen is not enabled, you can use the System Tray option to access the icons in the taskbar at the bottom of the screen. The taskbar displays indicators such as a radio signal icon and the security level. These indicators are attached to dialog boxes that provide additional information. • Choose Shortcuts>System Tray. Using the icons in the taskbar, you can either display the Control Panel dialog box associated with an icon, or you can view a “tooltip”. A tooltip provides the status of each icon. 48 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 4: Working With Windows CE 5.0 Shortcuts • Tap and hold the stylus on an icon to display the icon’s tooltip. Double-tap on the icon to open the Control Panel dialog box associated with the icon. On the keyboard: • • • • • Press [FN/BLUE] [.] to display the Start Menu. Choose Shortcuts from the Start Menu, and then press the [RIGHT] arrow key to display the sub-menu. Choose System Tray in the sub-menu. Use the arrow keys to highlight the icon in the taskbar about which you’d like more information. As each icon is highlighted, a tooltip is displayed. To display the associated Control Panel dialog box, press [ENTER]. Cycle Tasks When Cycle Tasks is selected (and the Task Manager is not open), you can cycle through active applications. To cycle through your active applications: • Choose Shortcuts>Cycle Tasks, or Press [ALT] [TAB]. Task Manager The Task Manager allows you to switch to another task or to end an active task. To display the task manager window: • Tap on Shortcuts>Task Manager, or Press [ALT] [ESC]. Figure 4.5 Task Manager Warrington Hand-Held Computer User Manual 49 Chapter 4: Working With Windows CE 5.0 Settings 4.4.5 Preliminary Draft Settings The Settings sub-menu includes the following settings: Control Panel, Network and Dial-up Connections, and Taskbar and Start Menu. Figure 4.6 Settings Sub-Menu Control Panel The Control Panel contains applets used to configure hardware, the operating system and the shell. If your Warrington is running with the Psion Teklogix TekTerm application or another application, additional configuration applets may appear in the Control Panel. Network And Dial-Up Connections The Network and Dial-up Connections window allows you to configure the Warrington radio or execute an existing configuration. Refer to “Configuring The Murata 802.11b/g Radio” on page 23 for radio setup details. Taskbar And Start Menu The Taskbar and Start Menu option displays a dialog box in which you can customize the taskbar, choosing which options will be displayed. Refer to “Customizing The Taskbar” on page 42 for additional details about this option. 4.4.6 Run Choosing the Run option from the Start Menu displays a dialog box in which you can enter the name of the program, folder or document you want to open or launch. 50 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 4: Working With Windows CE 5.0 Shutdown Figure 4.7 Run Dialog Box 4.4.7 Shutdown The Shutdown menu includes these options: Suspend and Warm Reset. Figure 4.8 Shutdown Sub-Menu Note: This menu varies slightly depending on the security level chosen. When the Warrington is set to User level, the Shutdown option is replaced by Suspend. A submenu is not available. Suspend The Suspend option suspends the Warrington immediately. This is equivalent to turning the hand-held off. Warrington Hand-Held Computer User Manual 51 Chapter 4: Working With Windows CE 5.0 Using A Dialog Box Preliminary Draft Warm Reset The Warm Reset option resets the Warrington, leaving all saved files and (registry) settings intact. Any unsaved data is lost. Cold Reset The Cold Reset option resets the Warrington, clearing all files not stored in permanent memory; however, the registry settings are saved. 4.5 Using A Dialog Box A dialog box (like the samples in Figure 4.9 on page 52) appears when you need to make selections and enter further information. You can move between dialog items by tapping on them with your stylus, or by pressing the arrow keys and the [TAB] key ([SHIFT] [TAB] moves the cursor backwards). Figure 4.9 Dialog Boxes Tabs Radio Button Textbox Drop-down Menu Checkbox Button Note: You can use the stylus to tap on an element in a dialog box to select or deselect it, display drop-down menus, save your selections, and so on. Dialog boxes contain one or more of the following elements: Tab: A tab separates different elements of a dialog box. Press the [TAB] key until a tab in the dialog box is highlighted. To display adjoining tabs, press the [RIGHT] or [LEFT] arrow 52 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 4: Working With Windows CE 5.0 Using A Dialog Box key. To display the information in the next tab from anywhere in the window, press [CTRL] [TAB]. Textbox: A textbox requires that you type information. Press the [TAB] key to highlight the textbox and then type the appropriate information. Drop-down: This type of menu is identified by up and down arrows next to the drop-down menu to indicate that additional options are available. Press the [TAB] key to highlight the menu, and use the arrow keys on your keyboard to cycle through the options. Checkbox: This box allows you to select or deselect an option. To select or deselect a checkbox, press the [TAB] key to highlight the checkbox, and press the [SPACE] key to select or deselect it. Radio buttons: These buttons allow you to choose from a number of options. For example, in the sample screen in Figure 4.9 on page 52 you can choose to Obtain an IP address via DHCP or Specify an IP address. Press the [TAB] key to highlight a radio button option, and then select a radio button by pressing the arrow keys to highlight the appropriate option. Buttons: This type of button allows you to Save, Delete and so on the options you’ve chosen in a dialog box. Use the [TAB] key to highlight the button you want to use. Press the [ENTER] key to activate it. Saving Your Choices: Once you’ve made all your changes, press the [ENTER] key to save your changes and exit the window. Note: A dialog box item that is displayed in grey text indicates that it is not currently available. Warrington Hand-Held Computer User Manual 53 Preliminary Draft Preliminary Draft GETTING TO KNOW THE WARRINGTON 5.1 Features Of The Warrington Hand-Held Computer . . . . . . . . . . . . . . . . . . 57 5.2 The Battery . . . . . . . . . . . . . . . . . . . . . 5.2.1 Battery Safety . . . . . . . . . . . . . . 5.2.2 Removing The Battery Pack . . . . . . . 5.2.2.1 Battery Swap Time . . . . . . . 5.2.3 Charging The Battery. . . . . . . . . . . 5.2.3.1 Chargers And Docking Stations. 5.3 Switching The Hand-Held On And Off . . . . . . 58 58 58 59 59 59 60 5.4 The Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . 5.4.1 Modifier Keys . . . . . . . . . . . . . . . . . . . . 5.4.1.1 Activating Modifier Keys . . . . . . . . . . 5.4.1.2 Locking Modifier Keys . . . . . . . . . . . 5.4.2 The Keys . . . . . . . . . . . . . . . . . . . . . . . 5.4.3 Function Keys And Macro Keys . . . . . . . . . . . 5.4.3.1 Function Keys . . . . . . . . . . . . . . . . 5.4.3.2 The Macro Keys. . . . . . . . . . . . . . . 5.4.4 26-Key Keyboard: Accessing Alpha Keys. . . . . . 5.4.5 The Keypad Backlight . . . . . . . . . . . . . . . . 5.5 The Display. . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5.1 Adjusting The Display Backlight . . . . . . . . . . 5.5.2 Calibrating The Touchscreen . . . . . . . . . . . . . 5.6 Warrington Hand-Held Indicators . . . . . . . . . . . . . . . 5.6.1 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . 5.6.2 Audio Indicators . . . . . . . . . . . . . . . . . . . 5.6.2.1 Adjusting The Warrington Speaker Volume 5.6.3 Onscreen Indicators . . . . . . . . . . . . . . . . . 5.7 Monitoring The Battery And Maximizing Run Time . . . . . 5.7.1 Storing Batteries . . . . . . . . . . . . . . . . . . . 5.8 Uploading Data In A Docking Station . . . . . . . . . . . . . 60 61 61 61 61 62 62 63 63 64 65 65 65 66 66 67 67 67 70 70 71 5.9 Bluetooth Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Warrington Hand-Held Computer User Manual 55 Preliminary Draft 5.9.1 Pairing A Bluetooth Headset Or Other Bluetooth Device 5.10 The MicroSD Card. . . . . . . . . . . . . . . . . . . . . . . . . 5.10.1 Inserting The Card . . . . . . . . . . . . . . . . . . . . 5.11 General Maintenance. . . . . . . . . . . . . . . . . . . . . . . . 5.11.1 Caring For The Touchscreen . . . . . . . . . . . . . . . 5.11.2 Cleaning The Warrington . . . . . . . . . . . . . . . . 56 Warrington Hand-Held Computer User Manual . 72 . 72 . 72 . 73 . 73 . 73 Preliminary Draft 5.1 Features Of The Warrington Hand-Held Computer Figure 5.1 Front View LED (Light Emitting Diode) Receiver Microphone Keyboard Protector Docking Port/USB On-The-Go Chapter 5: Getting To Know The Warrington The Battery Preliminary Draft Figure 5.2 Back View Scanner/Imager Expansion Connector Battery Cover & microSD Card Compartment Battery Latch 5.2 The Battery The hand-held operates with a Lithium Ion battery pack, Model No. WA3006. Preparing the unit for operation requires that a battery pack be charged and installed in the Warrington. 5.2.1 Battery Safety Important: Before attempting to install, use or charge the battery pack, it is critical that you review and follow the important safety guidelines in Chapter 1: “Approvals & Safety Summary”. 5.2.2 Removing The Battery Pack Important: Always switch the unit off before opening the battery cover to remove the battery. 58 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 5: Getting To Know The Warrington Battery Swap Time For details about unlatching the battery cover, review “Installing The Battery And Switching The Unit On” on page 22. 5.2.2.1 Battery Swap Time Assuming the default power saving parameters and battery reserve level have not been altered, battery swap time is a minimum of 10 minutes—you will not lose data if the battery is replaced within this time frame. The Suspend Threshold adjustment in the Power Properties tab allows you to determine the battery capacity at which the hand-held will be shut down. If left at the default value, Maximum Operating Time, the unit will run until the battery is completely empty; the RAM is only backed up for a short period of time. If you choose Maximum Backup Time, the handheld shuts off with more energy left in the battery so RAM can be backed up for a longer period of time. Refer to “Suspend Threshold” on page 102 for details about reserving battery power for data backup purposes. 5.2.3 Charging The Battery Batteries shipped from the factory are charged to approximately 40% of capacity. They must be fully charged prior to use. 5.2.3.1 Chargers And Docking Stations Important: FOR DETAILED INFORMATION about chargers and docking stations, refer to Appendix 7: “Peripheral Devices & Accessories”. Lithium Ion battery packs must be charged before use. These batteries can be charged with a variety of chargers and docking stations. These include: • AC wall adaptor (Model # PS1050-G1)—operates as an AC power source and when plugged in, also charges the battery installed in the unit. • Desktop Docking Station (Model # PX3001)—operates as both a charger and a docking station. Operating as a charger, both the battery installed in the hand-held and a spare battery can be charged simultaneously. • Quad Docking Station—(Model # PX3001) can charge the battery of up to four Warringtons inserted in the docking station. It can take up to 5 hours to charge a battery. The Warrington intelligent charging system protects the battery from over-charging by terminating the charge process when the battery is at maximum capacity. Warrington Hand-Held Computer User Manual 59 Chapter 5: Getting To Know The Warrington Switching The Hand-Held On And Off Preliminary Draft Note: Refer to “Monitoring The Battery And Maximizing Run Time” on page 70 for additional information about the battery. Important: To avoid damaging the battery, chargers will not begin the charge process until the battery temperature is between 0°C to 45°C (32°F to 113°F). 5.3 Switching The Hand-Held On And Off • To switch the unit on, press and hold down the [ENTER] key for at least one second. • When the LED flashes green, release the [ENTER] key. The startup screen is displayed. Note: If the Warrington is in suspend state, pressing [ENTER] ‘wakes’ the unit from this state. The screen in which you were working before the computer entered suspend state is displayed. Switching Off The Warrington (Suspend) Important: Keep in mind that turning off the Warrington does not result in a complete reboot; rather, the unit enters a power-saving, “suspend” state. When the unit is turned on from suspend state, operation resumes within a few seconds. • 5.4 To switch the unit off, press [FN/BLUE] [ENTER]. The Keyboard Two keyboard options are available: • 48-key alpha-numeric keyboard. This keyboard is only available with connected handhelds – units equipped with 802.11b/g radios. • 26-key numeric keyboard. This option is available for both variants of Warrington – connected hand-helds (described above) and unconnected or batch hand-helds not equipped with 802.11b/g radios. Most of the keys on these keyboards operate much like a desktop computer. Where a key or key function is not consistent with the PC keyboard, the differences are noted. 60 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 5: Getting To Know The Warrington Modifier Keys The [FN/BLUE] and [FN/ORANGE] modifier keys provide access to additional keys and system functions. These functions are colour coded in orange and blue print above the keyboard keys. 5.4.1 Modifier Keys The [SHIFT], [CTRL], [ALT], [FN/BLUE] and [FN/ORANGE] keys are modifier keys. Pressing a modifier key changes the function of the next key pressed. The [SHIFT], [CTRL] and [ALT] keys operate much like a desktop keyboard except that they are not chorded (two keys held down simultaneously). The modifier key must be pressed first followed by the key whose function you want modified. 5.4.1.1 Activating Modifier Keys When a modifier key is pressed once, it is displayed in lowercase letters in the taskbar at the bottom of the hand-held screen. For example, if the [CTRL] key is pressed, ctrl key is displayed at the bottom of the unit screen. Once the next key is pressed, the modifier key becomes inactive and disappears from the taskbar. Keep in mind, however, that the ‘One Shot’ function allows you to determine how many key presses will lock a modifier key ‘on’ – one press or two. Refer to “Keyboard One Shot Modes” on page 90 for details. 5.4.1.2 Locking Modifier Keys When a modifier key is pressed twice, it is ‘locked’ on. A ‘locked’ modifier key is displayed in uppercase letters in the taskbar. For example, pressing the [CTRL] key twice locks it on – it is displayed as CTRL KEY in the taskbar at the bottom of the computer screen. The locked modifier key will remain active until it is pressed a third time to unlock or turn it off. Once a modifier key is unlocked, the uppercase representation at the bottom of the screen is no longer displayed. 5.4.2 The Keys The [SHIFT] Key The [SHIFT] key is used to display uppercase alpha characters and provide access to the symbols above the numeric keys. Warrington Hand-Held Computer User Manual 61 Chapter 5: Getting To Know The Warrington Function Keys And Macro Keys Preliminary Draft The Arrow Keys The Arrow keys move the cursor around the screen in the direction of the arrow: up, down, left and right. The cursor is the flashing box or underline character that indicates where the next character you type will appear. The [SPACE] Key Pressing this key inserts a blank space between characters. In a Windows dialog box, pressing the [SPACE] key enables or disables a checkbox. The [BKSP/DEL] Key The [BKSP] key (sometimes referred to as destructive backspace) moves the cursor one character to the left, erasing the incorrectly entered key stroke. The [DEL] key ([FN/BLUE] [BKSP]) erases the character at the cursor position. The [CTRL] And [ALT] Key The [CTRL] and [ALT] keys modify the function of the next key pressed and are application-dependent. The [TAB] Key Typically, the [TAB] key moves the cursor to the next field to the right or downward. The [ESC] Key Generally, this key is used as a keyboard shortcut to close the current menu, dialog box or activity and return to the previous one. The [SCAN] Key All units are equipped with a yellow [SCAN] key. For units that do not have internal scanners, this key can be re-mapped to another function. 5.4.3 Function Keys And Macro Keys In addition to the standard keyboard functions, the Warrington supports Function keys and Macro keys. All Function and Macro keys can be custom defined for each application. 5.4.3.1 Function Keys The Warrington keyboard is equipped with a total of 14 function keys. Function keys [F1] to [F4] are located near the top of the keyboard on the [TAB], [ALT], [CTRL] and [ESC] keys and are directly accessible—a key combination is not required. Ten additional function keys 62 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 5: Getting To Know The Warrington The Macro Keys are colour coded in blue print on the unit body; these keys are accessed by executing a key combination, [FN/BLUE] followed by the appropriate numeric key. For example, to access function key [F7]: • • Press the [FN/BLUE] key followed by the [7] key—the numeric key to which function key [F7] is mapped. To access function key [F8], press [FN/BLUE] [8], and so on. 5.4.3.2 The Macro Keys While macro keys are not physically stamped on the keyboard, up to 12 macro functions can be added using the Scancode Remapping function. Refer to “Scancode Remapping” on page 94 for details about mapping keys. Refer to “Keyboard Macro Keys” on page 91 for details about programming characters in a Macro key. 5.4.4 26-Key Keyboard: Accessing Alpha Keys On numeric 26-key keyboards, numeric keys are directly accessible, and all alpha characters are printed on the unit plastic in orange characters above the numeric keys. An indicator in the left corner of the taskbar displays the currently selected character. To access an alpha character, first press the [FN/ORANGE] key and then press the numeric key above which the alpha character you want to type is printed. Choosing A Single Alpha Character The examples below illustrate how to access, A, B, and C, all of which are printed in orange characters above the numeric key [2]. Important: The letters you choose appear in the taskbar, providing a visual indicator of which letter will be displayed on the screen. To choose the letter a: • Press the [FN/ORANGE] key, and press the numeric key [2]. Note: To choose the second, third or fourth alpha character assigned to a numeric key, you may want to lock the [FN/ORANGE] key ‘on’. By default, the [FN/ORANGE] key is locked ‘on’ when pressed once. However, depending on how your unit is set up in the ‘One Shots’ tab, you may find that you need to press the [FN/ORANGE] key twice to lock it ‘on’. Refer to “Keyboard One Shot Modes” on page 90 for details. To choose the second letter in the sequence—in this example, the letter b: Warrington Hand-Held Computer User Manual 63 Chapter 5: Getting To Know The Warrington The Keypad Backlight Preliminary Draft • Lock the [FN/ORANGE] key ‘on’. ‘ORG KEY is displayed in upper-case characters in the taskbar to indicate that this key is locked ‘on’. • Press numeric key [2] twice to display the letter b. To choose the third letter in the sequence—in this example, the letter c: • • Lock the [FN/ORANGE] key ‘on’. Press numeric key [2] three times to display the letter c. Note: Keep in mind that there is a timeout if you pause for one second between key presses when selecting the second, third or fourth letters on a key. For example, suppose you want to type the letter ‘c’ – you’d need to press the [2] key three times. With the [FN/ORANGE] key locked ‘on’, if you press [2] twice and then pause between key presses for 1 second, the letter ‘b’ will be selected automatically. Creating Uppercase Letters To display a capital letter: • Press the [FN/ORANGE] key and then the [SHIFT] key before typing the alpha character. Note: If you want to use uppercase characters at all times, press [FN/BLUE] [SHIFT]. An icon of an uppercase ‘A’ is displayed in the taskbar indicating that all letters will be displayed as uppercase characters. Choosing Multiple Alpha Characters • Lock the [FN/ORANGE] key ‘on’. Each time you press a numeric key from [2] through [9], an alpha character will be displayed on the screen. Remember that you can refer to the softkey bar for a visual indication of which alpha key will be displayed on the screen. Important: Once you have finished typing alpha characters, remember to turn off or unlock the [FN/ORANGE] key. 5.4.5 The Keypad Backlight The intensity of the keypad backlight and the conditions under which this backlight is activated can be configured using the Keyboard icon in the Windows CE 5.0 Control Panel. The behaviour of the keypad backlight is tailored in the Keyboard Properties dialog box. Refer to “Keyboard Backlight” on page 89 for details about this option. 64 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 5: Getting To Know The Warrington The Display Note: Keep in mind that this option may be restricted to supervisory use only. 5.5 The Display Warrington hand-helds are equipped with display backlighting to improve character visibility in low light conditions. The backlight switches on when a key is pressed or the screen is tapped. 5.5.1 Adjusting The Display Backlight The Display Properties dialog box in the Control Panel allows you to determine the behaviour of the display backlight and its intensity. Refer to “Display Backlight” on page 84 for details about the Display Properties dialog box. 5.5.2 Calibrating The Touchscreen If your Warrington touchscreen has never been calibrated, or if you find that the stylus pointer is not accurate when you tap on an item, use the Stylus Properties dialog box in the Control Panel to recalibrate the screen. • In the Control Panel, choose the Stylus icon to display the Stylus Properties window. Figure 5.3 Stylus Icon • Select the Calibration tab, and then choose the Recalibrate button. Warrington Hand-Held Computer User Manual 65 Chapter 5: Getting To Know The Warrington Warrington Hand-Held Indicators Preliminary Draft Figure 5.4 Calibration Screen • 5.6 Follow the directions on the calibration screen to calibrate the screen. Warrington Hand-Held Indicators The Warrington uses an LED (Light Emitting Diode), onscreen messages and audio tones to indicate the various conditions of the hand-held, the batteries, the scans and so on. 5.6.1 LEDs A tri-coloured LED is located on the upper-left side of the unit, above the screen. The green LED is the battery charge indicator; the yellow LED indicates an application; the blue LED indicates whether the radio is on or off. When you press [ENTER], the LED flashes green to indicate that the unit has been powered up. The LED table following outlines the behaviour of the LED while the unit is docked in a charger. Keep in mind that the application running on the Warrington can dictate how the LED operates. Review the documentation provided with your application to determine LED behaviour. If the unit is attached to an external power supply, the hand-held’s LED reflects the battery charge status. 66 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 5: Getting To Know The Warrington Audio Indicators Table 5.1 Warrington LED Behaviour 5.6.2 LED Behaviour Charge Status Solid Green Charge complete. Fast Blinking Green Charge in progress. Battery charged to less than 80% capacity. Slow Blinking Green Battery charged to greater than 80% of capacity. Solid Red Temperature outside charge range (0°C to 50°C). Blinking Red Battery is not charging. Battery fault. Audio Indicators The audio speaker provides a variety of sounds when a key is pressed, a keyboard character is rejected, scan input is accepted or rejected, an operator’s entry does not match in a match field or the battery is low. To specify how you want your Warrington to respond under various conditions, refer to “Volume And Sound Properties” on page 98. The volume keys are located above the [UP ARROW] and [DOWN ARROW] keys. The increase volume key is labelled with a plus symbol and the decrease volume key is labelled with a minus symbol 5.6.2.1 Adjusting The Warrington Speaker Volume • • 5.6.3 Lock the [FN/BLUE] key ‘on’ and then, press [UP ARROW] – the increase volume key or [DOWN ARROW] – the decrease volume key until the volume meets your requirements. Remember to press the [FN/BLUE] key again to turn it ‘off’. Onscreen Indicators The taskbar at the bottom of the screen displays a variety of system status indicators. Warrington Hand-Held Computer User Manual 67 Chapter 5: Getting To Know The Warrington Onscreen Indicators Preliminary Draft Figure 5.5 Taskbar The taskbar changes dynamically, and only those icons that are applicable are displayed. For example, if a radio is not installed in your Warrington, the radio signal icon is not displayed in the taskbar. Windows® Start Button If you are using the touchscreen, you can either tap the Windows icon at the bottom left of the screen, or press [FN/BLUE] [.] (period) to display the Start Menu, and then tap on the desired application. Modifier Key Indicators [SHIFT], [CTRL], [ALT], [FN/BLUE] and [FN/ORANGE] are modifier keys that when pressed, are displayed in the taskbar to indicate that they are active. If a modifier key is locked ‘on’, it is displayed in uppercase characters. For example, if the [FN/BLUE] key is locked on, it is displayed as BLUE KEY in the taskbar. A locked modifier key remains active until it is pressed again to unlock or turn it off. If a modifier key has been pressed but is not locked on, it is displayed in the taskbar in lowercase characters – for example, blue key. It will remain active only until the next key is pressed at which point, the modifier key is turned off. 68 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 5: Getting To Know The Warrington Onscreen Indicators Note: The locking function of the modifier keys can be set up so that pressing one of these keys once will lock the key ‘on’. They can also be set up so that they must be pressed twice to be locked ‘on’. Refer to “Keyboard One Shot Modes” on page 90 for details. Battery Gauge The battery shaped icon displayed in the taskbar provides a visual indication of the remaining battery power. The icon acts as a meter that is either full, at three-quarter level, half, quarter level or empty. When the battery level is low—approximately 15 minutes from empty—a warning window pops up. When the battery power is completely depleted, a final warning window indicates that the Warrington will be powered down. If the Warrington is using external AC power, an AC icon is displayed in the taskbar. Full 75% 50% 25% Empty AC Connection Battery Charge The battery charge icon is displayed in the taskbar when the hand-held battery is being charged. 802.11 Radio Signal Quality Increasing radio signal quality is represented by longer, filled bars within this icon. Good Reception Weak Reception No Radio Link Docking Device When a hand-held is inserted in a docking station or charger, an associated icon appears in the taskbar. Bluetooth Radio This icon displayed in the taskbar represents the installed Bluetooth radio. Warrington Hand-Held Computer User Manual 69 Preliminary Draft Chapter 5: Getting To Know The Warrington Monitoring The Battery And Maximizing Run Time Security Level Security levels can be set to limit user access. In addition, applications can be restricted to prevent inadvertent changes. 5.7 Monitoring The Battery And Maximizing Run Time Note: When the main battery is at 50% capacity, a ‘low battery’ warning is displayed. When the battery is at approximately 10% capacity, a ‘very low main battery’ notification appears. As Lithium Ion batteries age, their capacity decreases gradually, and they are generally considered depleted after approximately 2 years of use (less than 60% of original capacity remaining). Keep in mind however that heavy usage or operating the unit at temperature extremes will shorten the battery life. Lithium Ion batteries do not require conditioning cycles and the Warrington battery system (including chargers) requires no user interaction to maintain peak performance. To maximize the run time of your batteries, consider the following: • • • • 5.7.1 The display backlight is the largest drain on the battery. Try to keep its brightness as low as possible. The hand-held is ‘event’ driven—that is, when the unit is not in use, it reverts to sleep mode (even when it appears to be running), saving battery power. Events include a key press, touchscreen taps and scan triggers. Power consumption is reduced if you avoid unnecessary events, and allow the unit to sleep as much as possible. The battery is a ‘smart battery’ with built-in intelligence. Tapping on the Power icon in the Control Panel displays a dialog box that provides detailed information about the battery status of the main battery installed in your unit. When the hand-held is switched off, it goes into a low-power, suspend state but continues to draw a small amount of power from the battery. This should not be an issue unless the unit is left in suspend state for more than a week—for long-term storage, the battery should be removed from the unit. Storing Batteries Long term battery storage is not recommended. If storage is necessary: • 70 Always try to use a ‘first-in first-out’ approach to minimize storage time. Warrington Hand-Held Computer User Manual Preliminary Draft • • • • 5.8 Chapter 5: Getting To Know The Warrington Uploading Data In A Docking Station Lithium Ion batteries age much faster at elevated temperatures. Store batteries at temperatures between 0 °C and 20 °C (32 °F and 68 °F). Always charge batteries to at least 40 to 60% before storing them. Batteries can be damaged by an over-discharge phenomenon that occurs when an empty battery is stored for a long period of time such that the cell voltage drops below a lower limit. To minimize storage degradation, recharge stored batteries to 40 to 60% every 4 or 6 months to prevent over-discharge damage. A ‘never used’ Li-Ion battery that has been stored for 3 years may have limited or no useful life remaining once put into service. Think of batteries as perishable goods. Uploading Data In A Docking Station Important: Review the documentation provided with the user application installed in your Warrington before performing data uploads. The desktop docking station and quad docking station are typically used to upload transaction data to a server computer when a radio link is not available. Note: Refer to “Desktop Docking Station” on page 186 for more details. The desktop docking station can complete batch uploads to a Client USB connected PC or server. An optional 10/100baseT Ethernet module is also available. Unlike the desktop docking station, the quad docking station supports only TCP/IP connections to a PC or server through a 10/100baseT Ethernet connection. When a Warrington is properly inserted in a docking station, a dock icon is displayed in the navigation bar at the top of the screen. The unit also detects the presence of the Ethernet network. 5.9 Bluetooth Radio Note: Integrated Bluetooth Class II radios are standard on ‘connected’ Warringtons – that is, units equipped with 802.11 radios. On ‘unconnected’ or batch units, Bluetooth is an optional feature. The Bluetooth radio enables short range data communication between devices. In addition, it provides the capability to use a Bluetooth-enabled cellular phone as a data modem, exchanging information with other Bluetooth devices and providing network access. You can Warrington Hand-Held Computer User Manual 71 Preliminary Draft Chapter 5: Getting To Know The Warrington Pairing A Bluetooth Headset Or Other Bluetooth Device also pair your hand-set with a Bluetooth headset. Refer to “Bluetooth Setup” on page 110 for setup details. 5.9.1 Pairing A Bluetooth Headset Or Other Bluetooth Device Note: If the Bluetooth radio is not already enabled, tap on the Power icon in the Control Panel, tap on the Devices tab and enable the Bluetooth radio. To pair a headset: • Follow the headset manufacturer’s instructions to place the headset you want to place in pairing mode. • In the Control Panel, tap on the Bluetooth icon choose the Devices tab and scan for devices in your area. (Note that if you’re pairing the device for the first time, the device scan occurs automatically—you do not need to tap on the Scan button to perform a scan.) When the scan is complete, a list of devices is listed. • Double-click on the headset you want to pair with. If you prefer, you can highlight headset and tap on the Services button. A dialog box appears requesting that you enter a PIN number. • Type your pin number and tap on OK. A Services dialog box appears listing headset. • Press and hold the stylus on headset. In the pop-up menu, choose Active. Your headset is now paired. A COM/BSP port name will now appear beside the service for this device. An asterisk will appear under the Active list in the Service screen. 5.10 The MicroSD Card A microSD card slot is available in the battery compartment. MicroSD cards provide additional, non-volatile memory to your hand-held. 5.10.1 Inserting The Card • • • • • 72 Switch off the Warrington. Remove the battery cover and the battery. Gently slide the SD door down and then flip it forward. Fit the card into the slot, pushing it inward to secure it in place. Flip the SD door back into place, and slide it upward to lock it. Warrington Hand-Held Computer User Manual Preliminary Draft 5.11 Chapter 5: Getting To Know The Warrington General Maintenance General Maintenance 5.11.1 Caring For The Touchscreen The top of the touchscreen is a thin, flexible polyester plastic sheet with a conductive coating on the inside. The polyester can be permanently damaged by harsh chemicals and is susceptible to abrasions and scratches. Using sharp objects on the touchscreen can scratch or cut the plastic, or crack the internal conductive coating. The chemicals listed below must not come into contact with the touchscreen: • sodium hydroxide, • concentrated caustic solutions, • benzyl alcohol, and • concentrated acids. If the touchscreen is used in harsh environments, consider applying a disposable screen protector (WA6110???). These covers reduce the clarity of the display slightly but will dramatically extend the useful life of the touchscreen. When they become scratched and abraded, they are easily removed and replaced. 5.11.2 Cleaning The Warrington Important: Do not immerse the unit in water. Dampen a soft cloth with mild detergent to wipe the unit clean. • • • Use only mild detergent or soapy water to clean the hand-held unit. Avoid abrasive cleaners, solvents or strong chemicals for cleaning. The plastic case is susceptible to harsh chemicals. The plastic is partially soluble in oils, mineral spirits and gasoline. The plastic slowly decomposes in strong alkaline solutions. To clean ink marks from the keypad and touchscreen, use isopropyl alcohol. Warrington Hand-Held Computer User Manual 73 Preliminary Draft Preliminary Draft CONFIGURATION 6.1 Remote Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 6.2 The TekTerm Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 6.3 The Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 6.4 Control Panel Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 6.5 Basic Setup . . . . . . . . . . . . . . . . . . . . . 6.5.1 Display Properties . . . . . . . . . . . . 6.5.1.1 Display Backlight . . . . . . . . 6.5.1.2 Display Appearance . . . . . . . 6.5.2 Keyboard Properties . . . . . . . . . . . 6.5.2.1 Key Repeat . . . . . . . . . . . 6.5.2.3 Keyboard Backlight . . . . . . . 6.5.2.4 Keyboard One Shot Modes . . . 6.5.2.5 Keyboard Macro Keys . . . . . 6.5.2.6 Unicode Mapping . . . . . . . . 6.5.2.7 Scancode Remapping . . . . . . 6.5.3 Volume And Sound Properties . . . . . . 6.5.3.1 Volume Adjustments . . . . . . 6.5.3.2 Sound Adjustments . . . . . . . 6.5.4 Power Management Properties. . . . . . 6.5.4.1 Battery Capacity. . . . . . . . . 6.5.4.2 Power Saving Suspend . . . . . 6.5.4.3 Suspend Threshold . . . . . . . 6.5.4.4 Advanced . . . . . . . . . . . . 6.5.4.5 Devices . . . . . . . . . . . . . 6.5.5 Stylus Properties . . . . . . . . . . . . . 6.5.5.1 Double-Tap . . . . . . . . . . . 6.5.5.2 Calibration. . . . . . . . . . . . 6.5.5.3 Touch . . . . . . . . . . . . . . 6.5.6 Manage Triggers . . . . . . . . . . . . . 6.5.6.1 Trigger Mappings . . . . . . . . 6.5.6.2 Add And Edit Trigger Mapping. 6.5.7 Certificate Assignment . . . . . . . . . . Warrington Hand-Held Computer User Manual . 83 . 83 . 84 . 86 . 86 . 87 . 89 . 90 . 91 . 93 . 94 . 98 . 99 . 99 .100 .100 .101 .102 .103 .103 .104 .104 .104 .105 .105 .106 .107 .109 75 Preliminary Draft 6.6 Bluetooth Setup . . . . . . . . . . . . . . . . . . 6.6.1 The Devices Tab. . . . . . . . . . . . . 6.6.1.1 Pairing A Device . . . . . . . . 6.6.2 The Servers Tab . . . . . . . . . . . . . 6.6.3 Outgoing Tab . . . . . . . . . . . . . . 6.6.4 Active Conn. Tab . . . . . . . . . . . . 6.6.5 The Properties Tab . . . . . . . . . . . 6.6.7 The Bluetooth GPRS WAN Connection 6.7 Total Recall . . . . . . . . . . . . . . . . . . . . 6.7.1 Creating A Backup Profile . . . . . . . 6.7.2 Restoring A Profile . . . . . . . . . . . 6.8 The Storage Manager . . . . . . . . . . . . . . . 6.8.1 Formatting A Memory Card . . . . . . 6.8.2 Creating Partitions. . . . . . . . . . . . 6.8.3 Partition Management . . . . . . . . . . 6.9 IPv6 Support. . . . . . . . . . . . . . . . . . . . 76 110 111 111 114 115 116 117 118 123 124 128 128 128 129 131 133 6.10 Scanner Settings . . . . . . . . . . . . . . . . . . . . . . . . 6.10.1 Bar Codes . . . . . . . . . . . . . . . . . . . . . . 6.10.1.1 Scanner . . . . . . . . . . . . . . . . . . . 6.10.1.2 Restoring Default Settings . . . . . . . . . 6.10.2 Decoded (Internal) Scanners . . . . . . . . . . . . . 6.10.2.1 Options . . . . . . . . . . . . . . . . . . . 6.10.2.2 Decoded (Internal) – Advanced Options . . 6.10.2.3 Decoded (Internal) – 2D Scanning Options 6.10.2.4 Decoded (Internal) Data Options . . . . . . 6.10.2.5 Code 39 . . . . . . . . . . . . . . . . . . . 6.10.2.6 Code 128 . . . . . . . . . . . . . . . . . . 6.10.2.7 EAN 13 . . . . . . . . . . . . . . . . . . . 6.10.2.8 EAN 8. . . . . . . . . . . . . . . . . . . . 6.10.2.9 UPC A . . . . . . . . . . . . . . . . . . . 6.10.2.10 UPC E . . . . . . . . . . . . . . . . . . . 6.10.2.11 UPC/EAN Shared Settings . . . . . . . . 6.10.2.12 Code 93 . . . . . . . . . . . . . . . . . . 6.10.2.13 Codabar . . . . . . . . . . . . . . . . . . 6.10.2.14 MSI Plessey . . . . . . . . . . . . . . . . 6.10.2.15 Interleaved 2 of 5 . . . . . . . . . . . . . 6.10.2.16 Discrete 2 of 5 . . . . . . . . . . . . . . . 6.10.2.17 RSS Code . . . . . . . . . . . . . . . . . 134 134 135 135 136 136 137 139 139 140 143 143 144 144 145 146 147 147 148 149 150 150 Warrington Hand-Held Computer User Manual Preliminary Draft 6.10.2.18 Composite . . . . . . . . . . . . . . . . 6.10.2.19 PDF-417 . . . . . . . . . . . . . . . . . 6.10.2.20 Micro PDF-417 . . . . . . . . . . . . . . 6.10.3 Decoded (ISCP) . . . . . . . . . . . . . . . . . . . 6.10.3.1 Decoded (ISCP) – Options. . . . . . . . . 6.10.3.2 Decoded (ISCP) – Advanced Options . . . 6.10.3.3 Code 39 . . . . . . . . . . . . . . . . . . 6.10.3.4 Code 128 . . . . . . . . . . . . . . . . . . 6.10.3.5 EAN 13 Settings . . . . . . . . . . . . . . 6.10.3.6 EAN 8 . . . . . . . . . . . . . . . . . . . 6.10.3.7 UPC A . . . . . . . . . . . . . . . . . . . 6.10.3.8 UPC E . . . . . . . . . . . . . . . . . . . 6.10.3.9 UPC/EAN Shared Settings . . . . . . . . 6.10.3.10 Code 93 . . . . . . . . . . . . . . . . . . 6.10.3.11 Codabar . . . . . . . . . . . . . . . . . . 6.10.3.12 MSI Plessey. . . . . . . . . . . . . . . . 6.10.3.13 Code 11 . . . . . . . . . . . . . . . . . . 6.10.3.14 Interleaved 2 of 5 . . . . . . . . . . . . . 6.10.3.15 Matrix 2 of 5 . . . . . . . . . . . . . . . 6.10.3.16 Discrete 2 of 5 . . . . . . . . . . . . . . 6.10.3.17 Telepen . . . . . . . . . . . . . . . . . . 6.10.3.18 RSS Code (Reduced Space Symbology) . 6.10.3.19 PDF-417 . . . . . . . . . . . . . . . . . 6.10.3.20 Micro PDF-417 . . . . . . . . . . . . . . 6.10.3.21 Codablock . . . . . . . . . . . . . . . . 6.10.4 Imager . . . . . . . . . . . . . . . . . . . . . . . . 6.10.4.1 Imager – Options. . . . . . . . . . . . . . 6.10.4.2 Imager – Advanced Options . . . . . . . . 6.10.4.3 Code 39 Settings . . . . . . . . . . . . . . 6.10.4.4 Code 128 Settings . . . . . . . . . . . . . 6.10.4.5 EAN 13 . . . . . . . . . . . . . . . . . . 6.10.4.6 EAN 8 . . . . . . . . . . . . . . . . . . . 6.10.4.7 UPC A . . . . . . . . . . . . . . . . . . . 6.10.4.8 UPC E . . . . . . . . . . . . . . . . . . . 6.10.4.9 Code 93 . . . . . . . . . . . . . . . . . . 6.10.4.10 Codabar . . . . . . . . . . . . . . . . . . 6.10.4.11 Interleaved 2 of 5 . . . . . . . . . . . . . 6.10.4.12 RSS Code (Reduced Space Symbology) . 6.10.4.13 Composite . . . . . . . . . . . . . . . . 6.10.4.14 PDF-417 . . . . . . . . . . . . . . . . . 6.10.4.15 Micro PDF-417 . . . . . . . . . . . . . . Warrington Hand-Held Computer User Manual .151 .151 .152 .153 .153 .153 .154 .155 .157 .157 .158 .158 .159 .160 .160 .161 .162 .162 .163 .163 .164 .165 .165 .165 .166 .167 .167 .168 .171 .171 .171 .172 .172 .172 .172 .173 .173 .173 .173 .173 .174 77 Preliminary Draft 6.10.4.16 2D Data Matrix . . . . . 6.10.4.17 2D QR Code . . . . . . . 6.10.4.18 2D Maxicode . . . . . . 6.10.4.19 2D Aztec. . . . . . . . . 6.10.4.20 Postal: PlaNET . . . . . 6.10.4.21 Postal: PostNET . . . . . 6.10.4.22 Postal: Australian . . . . 6.10.4.23 Postal: Japanese . . . . . 6.10.4.24 Postal: Korean . . . . . . 6.10.4.25 Postal: Royal. . . . . . . 6.10.5 Options . . . . . . . . . . . . . . . 6.10.5.1 Double Click Parameters . 6.10.5.2 Display Parameters . . . . 6.10.6 Translations Tab . . . . . . . . . . 6.10.6.1 Case Rules . . . . . . . . 78 Warrington Hand-Held Computer User Manual 174 174 174 174 175 175 175 175 175 176 176 176 177 178 179 Preliminary Draft 6.1 Chapter 6: Configuration Remote Connect Remote Connect Remote Connect is a Warrington application used to connect to a Windows Terminal Server so that you can run a “session” on the Server machine, using the Warrington (Windows CE 5.0 device). Refer to the following website for step-by-step information about setting up this connection: http://www.microsoft.com/WindowsXP/pro/using/howto/gomobile/remotedesktop/default.asp or contact Psion Teklogix support services. (Locate the office closest to you at: www.psionteklogix.com). 6.2 The TekTerm Application TekTerm is a powerful emulation application ideally suited for real time data transaction applications associated with mainframes and servers. The Warrington includes unique features that support TekTerm—a Psion Teklogix application that has the ability to maintain multiple simultaneous sessions with a variety of host computers. For detailed information, please refer to the TekTerm Software User Manual, PN 8000073. 6.3 The Control Panel The Windows CE 5.0 Control Panel provides a group of icons through which you can set a variety of system-wide properties, such as mouse sensitivity, network configuration and the desktop color scheme. Note: If you are uncertain how to move around a dialog box and make selections, review “Using A Dialog Box” on page 52. When the Warrington boots up, the startup desktop (shell) is displayed, and any applications stored in the Startup folder start up immediately. To access the Control Panel: • Tap on Start>Settings>Control Panel. If you’re using the keyboard: • • Press [FN/BLUE] [.] to display the Start Menu. Highlight Settings in Start Menu, and press the [RIGHT] arrow key to highlight the Control Panel. • Press the [ENTER] key. The Control Panel folder contains icons used in the setup of your Warrington. Warrington Hand-Held Computer User Manual 79 Chapter 6: Configuration Control Panel Icons Preliminary Draft Figure 6.1 Control Panel 6.4 Control Panel Icons The Control Panel provides a group of icons that allow you to customize and adjust settings on your Warrington. App Launch Keys By mapping keys to applications using this program, you can then launch those applications from a single key-press. Bluetooth Devices Provides the tools to manage device pairing and configuration. Certificates A public key is transmitted as part of a certificate. The certificate assigned through this icon is used to ensure that the submitted public key is, in fact, the public key that belongs to the submitter. The client checks that the certificate has been digitally signed by a certification authority that the client explicitly trusts. “Certificate Assignment” on page 109 directs you to the appropriate setup information. 80 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Control Panel Icons Date/Time Allows you to set the current Month, Date, Time and Time Zone on your unit. Dialing Specifies dialing settings, including area code, country code, dial type and the code to disable call waiting. You can store multiple patterns—for example, ‘Work’, ‘Home’, and so on using this dialog box. Display Changes the appearance (window colour scheme) on the unit desktop. Error Reporting Error Reporting allows you to enable or disable Microsoft error reporting prompts. Input Panel Provides the framework for a Soft Input Panel (SIP) should you need to design your own SIP, or change some soft keyboard options. Internet Options Provides options to configure your Internet browser. You can determine items such as the default and search page that the browser applies when connecting to the Internet, the cache size, the Internet connection options, and the security level that is applied when browsing. IPv6 Support Refers to a new Internet Protocol specification (version 6) that has been published to use 128-bit IP addresses (replacing version 4). Keyboard Toggles character repeat on and off and specifies delay and rate for repeated characters. This applet also allows you to adjust the keyboard backlight threshold and intensity, define OneShot Mode, remap keys using Scancode Remap and program Macro Keys. Manage Triggers Allows multiple-scanner trigger management, including the ability to configure each of the trigger buttons. You can configure the trigger ID for each trigger button for both single- and double-click, and the double-click time. Warrington Hand-Held Computer User Manual 81 Chapter 6: Configuration Control Panel Icons Preliminary Draft Network And Dial-up Connections Displays a network window from which the Warrington 802.11g radio can be configured and an existing configuration can be executed. Refer to “Configuring The Murata 802.11b/g Radio” on page 23 for details. Owner Provides fields in which you can specify owner information. A Notes tab allows additional information to be entered and displayed when the unit is powered up. Network ID tab information is used to access network resources. (This information should be provided by your System Administrator.) Password Allows you to assign a password to restrict access to elements of the unit. Once assigned, password access cannot be circumvented so it is important that you write down your password and keep it in a safe place. Refer to “Security Settings” on page 45 for details. PC Connection Enables direct connections to a desktop computer. Selecting the Change Connection button allows you to change the type of direct connect to your PC. Power Displays battery pack power status. (Alternately, battery status can be accessed through the taskbar.) Additional tabs allow you to determine suspend states, specify a suspend threshold and, when seated in either the Combo Dock or Quad Dock, determine whether or not a battery that requires it can be recalibrated. This dialog box also allows you to activate card slots and built-in devices. (Refer to “Devices” on page 103 for details.) RDC Licenses The Terminal Services license server stores all license tokens that have been installed for a group of terminal servers and tracks licenses issued. The Remote Desktop Licenses (RDC) application displays license ‘tokens’ for devices that connect to a Terminal Server. Region & Language Allows you to specify the local language that is to be displayed on the hand-held screen along with the format of numbers, currency, time and date for your region. Remove Programs Lists the programs that can be removed from your unit. To remove a program, select it and then click on the Remove button. 82 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Basic Setup Storage Manager Allows the user to view information about the storage devices that are present, such as SDMMC flash cards. For details, see page 128. Stylus Adjusts how Windows CE 5.0 recognizes your double-tap (as slow or rapid successive taps). In the Calibration tab, you can recalibrate your touchscreen by tapping on the Recalibrate button and following the directions on the screen. System Displays system and memory properties. In the Memory tab, you can allocate memory between storage memory and program memory. Teklogix Error Handling Service Teklogix Error Handling Service is an error diagnostic tool. Teklogix Scanners Provides scanner parameters and the bar code symbologies that the Warrington scanner will successfully read. Total Recall Provides access to a backup and restore utility to maintain applications and settings over warm reboots. TweakIT Settings Allows you to change Advanced System Settings (interface, network, and servers), User System Settings (display font size), and provides the Registry Editor. Volume & Sounds Allows you to adjust the volume of the sound emitted to indicate events like warnings, key clicks and screen taps. 6.5 Basic Setup 6.5.1 Display Properties • In the Control Panel, choose the Display icon. Warrington Hand-Held Computer User Manual 83 Chapter 6: Configuration Display Backlight Preliminary Draft Figure 6.2 Choosing The Display Icon 6.5.1.1 Display Backlight The backlight is activated for a configurable amount of time when the Warrington is in use (key press, scanner trigger, or data received from the host). The Display Properties dialog box in the Control Panel allows you to specify the intensity of the backlight along with how long the display will maintain the specified intensity. Note: Keep in mind that this option may be restricted to supervisory use only. 84 Warrington Hand-Held Computer User Manual Preliminary Draft • Chapter 6: Configuration Display Backlight In the Display Properties dialog box, open the Backlight tab. Note: Backlight changes take effect immediately. You do not need to reset the unit. To maximize battery run time, keep the display backlight brightness and active durations as low as possible. Intensity This parameter is used to adjust the light intensity of the Warrington backlight. Sliding the bar to the left lowers the light intensity, and sliding it to the right raises the intensity. Bright For The value chosen from this drop-down menu determines the duration of time that the backlight stays on at the configured intensity after the last user action (keypress, scan trigger). Dim For The value chosen from this drop-down menu determines the duration of time that the backlight stays on at half the configured intensity (dimmed backlight) after expiration of the Bright For delay and as long as no user action takes place (such as a keypress or scan trigger). At the expiration of the Dim For duration, the display backlight shuts off. External Power Checkbox When you select the checkbox next to When using external power keep the backlight always ON, the backlight remains on at the configured intensity when the Warrington is operating with external power (not battery power). If the Warrington is drawing power from its batWarrington Hand-Held Computer User Manual 85 Chapter 6: Configuration Display Appearance Preliminary Draft tery, this option is ignored and the other parameters defined in Display Properties dialog box are used. 6.5.1.2 Display Appearance • In the Display Properties dialog box, open the Appearance tab. This dialog box allows you to customize the display colour scheme. 6.5.2 Keyboard Properties This icon displays the Keyboard Properties dialog box in which you can adjust the repeat rate of the keys, the intensity of the keyboard backlight and the behaviour of the [FN/BLUE] and [FN/ORANGE] modifier keys. This dialog box also allows you to define macro keys and Unicode characters. • 86 In the Control Panel, choose the Keyboard icon. Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Key Repeat Figure 6.3 Choosing The Keyboard Icon 6.5.2.1 Key Repeat Note: These settings apply when a key is held down continuously. • In the Keyboard Properties dialog box, open the Repeat tab. Repeat Delay The value assigned for this parameter determines the delay in milliseconds between repeat characters. Sliding the Repeat Delay bar to the left increases the delay between key repeats, and sliding the bar to the right shortens the repeat delay time. Warrington Hand-Held Computer User Manual 87 Chapter 6: Configuration Sequence Preliminary Draft Repeat Rate The value assigned for the Repeat Rate parameter determines how quickly the key you press repeats and is measured in characters per second (cps). Sliding the bar to the left slows the repeat rate, and sliding the bar to the right increases the repeat rate. Note: Use the field at the bottom of this dialog box to test the repeat delay and rate settings you’ve chosen. 6.5.2.2 Sequence This tab determines the allowable pause between alpha key presses on a numeric keypad. For example, suppose you want to type the letter ‘c’ – you would need to press the [2] key three times. With the [ORANGE] key locked ‘on’, if you press [2] twice and then pause between key presses for 1 second, the letter ‘b’ will be selected automatically. Moving the Sequence slider to the right increases the pause time between alpha key presses. 88 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Keyboard Backlight 6.5.2.3 Keyboard Backlight • In the Keyboard Properties dialog box, open the Backlight tab. Intensity This parameter is used to adjust the light intensity of the Warrington keyboard backlight. Sliding the bar to the left darkens the keyboard backlight intensity, and sliding it to the right lightens the intensity. ON For The value chosen from this drop-down menu determines the duration of time that the keyboard backlight stays on when a unit is not in use. Note: Tapping in the checkbox next to ‘When using external power, keep the backlight always ON’ forces the keypad backlight to remain on when the unit is operating with external power. Warrington Hand-Held Computer User Manual 89 Chapter 6: Configuration Keyboard One Shot Modes Preliminary Draft 6.5.2.4 Keyboard One Shot Modes • In the Keyboard Properties dialog box, open the One Shots tab. The options in this tab allow you to determine how modifier keys on your Warrington behave. For each modifier key—[ALT], [SHIFT], [CTRL], [FN/ORANGE] and [FN/BLUE] – you have the following options in the drop-down menu: Lock, OneShot, and OneShot/Lock. Note: Keep in mind that checking the taskbar lets you know whether or not these keys are locked on. For example, if the [FN/ORANGE] key is locked ‘on’, the taskbar at the bottom of the screen displays it in uppercase characters, ORANGE KEY. If this key is displayed in lowercase characters in the taskbar, you’ll know that the orange key is not locked. It will become inactive following a key press. Important: Once you’ve assigned a One Shot mode to a modifier key, you need to tap on the OK button at the top of the tab to activate your selection. Lock If you choose Lock from the drop-down menu, pressing a modifier key once locks it ‘on’ until you press the modifier key a second time to unlock or turn it off. OneShot If you choose OneShot, the modifier key remains active only until the next key is pressed. 90 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Keyboard Macro Keys OneShot/Lock OneShot/Lock allows you to combine these functions. When you choose this option and you press the modifier key once, it remains active only until the next key is pressed. If you press the modifier key twice, it is locked ‘on’, remaining active until the modifier key is pressed a third time to turn it ‘off’. 6.5.2.5 Keyboard Macro Keys • In the Keyboard Properties dialog box, open the Macros tab. A macro has 200 programmable characters (or “positions”). The macro keys can be programmed to replace frequently used keystrokes, along with the function of executable keys including [ENTER], [BKSP] and [DEL] ([FN/BLUE]-[BKSP]), function keys and arrow keys. Recording And Saving A Macro On the 36-key Warrington, you can program a maximum of 6 macro keys. • In the Macro menu highlight a macro key number, for example macro 1, to assign a macro to macro key [M1]. Choose the Record button. Warrington Hand-Held Computer User Manual 91 Chapter 6: Configuration Keyboard Macro Keys Preliminary Draft A message screen is displayed instructing you to Enter Key Strokes to Record • Type the macro sequence you want to assign to the Macro key. You can type text and numbers, and you can program the function of special keys into a macro. • When you’ve finished recording your macro sequence, press the key sequence: [CTRL] [ALT] [ENTER], or choose the Stop Recording button. A new screen called ‘Verify Macro’ displays the macro sequence you created. The Save button is highlighted. • Press [ENTER] to save your macro, or highlight CANCEL and press [ENTER] to discard it. Executing A Macro To execute a macro: • Press the macro key to which you’ve assigned the macro. For example, if you created a macro for macro key 1, press [M1] to execute the macro. Deleting A Macro To delete a macro: • • 92 In the Macros tab, highlight the macro number you want to delete. Choose the Delete button. Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Unicode Mapping 6.5.2.6 Unicode Mapping • In the Keyboard Properties dialog box, open the Unicode Mapping tab. The Unicode Mapping tab is used to map combinations of virtual key values and [CTRL] and [SHIFT] states to Unicode™ values. This tab shows the configured Unicode character along with the Unicode value. For example, the sample screen above shows “a (U+0061)” indicating that the character “a” is represented by the Unicode value “0061”, and so on. Keep in mind that Unicode configurations are represented as hexadecimal rather than decimal values. All user-defined Unicode mappings are listed in the Unicode Mapping tab in order of virtual key value, and then by order of the shift state. If a Unicode mapping is not listed, the Unicode mapping is mapped to the default Unicode value. Adding And Changing Unicode Values Important: Changes to Unicode mappings are not saved until you exit the Keyboard Properties dialog box. • Choose the Add/Change button Warrington Hand-Held Computer User Manual 93 Chapter 6: Configuration Scancode Remapping Preliminary Draft Figure 6.4 Adding And Changing Unicode Values • • Highlight a value in the Unicode mapping list. In the sample screen above, a value will be assigned to virtual key 0 (VK 0). Position the cursor in the Unicode Mapping field, and type a Unicode value for the highlighted key. Note: To add a shifted state, [SHIFT] and/or [CTRL], press [TAB] to position the cursor in the checkbox next to ‘SHIFT Pressed’ and/or ‘CTRL Pressed’. Press [SPACE] to select the shift state you want to assign. Removing Unicode Values • In the Unicode Mapping tab, highlight the item you want to delete, and choose the Remove button. 6.5.2.7 Scancode Remapping A scancode is a number that is associated with a physical key on a keyboard. Every key has a unique scancode that is mapped to a virtual key, a function or a macro. Scancode Remapping allows you to change the functionality of any key on the keyboard. A key can be remapped to send a virtual key (e.g. VK_F represents the ‘F’ key; VK_RETURN represents the [ENTER] key, etc.), perform a function (e.g. turn the scanner on, change volume/contrast, etc.) or run a macro. There are three different tables of scancode mappings: the Normal table, the Blue table and the Orange table. The Normal table defines unmodified key presses; the Blue table defines 94 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Scancode Remapping key presses that occur when the [FN/BLUE] modifier is on; the Orange table defines key presses that occur when the [FN/ORANGE] modifier is on. The default mappings of these scancodes can be overwritten for each of these three tables using the Scancode Remapping tab accessed from the Keyboard Properties dialog box. The first column in the Scancode Remapping tab displays the scancodes in hexadecimal. If the scancode is remapped to a virtual key, that virtual key is displayed in the next column labelled ‘V-Key’. A virtual key that is ‘Shifted’ or ‘Unshifted’ is displayed in the third column labelled ‘Function’. If the scancode is remapped to a function or a macro, the first and second columns remain blank while the third column contains the function name or macro key number (e.g., Macro 2). Adding A Remap To add a new remapping: • Choose the Add button at the bottom of the dialog box. Warrington Hand-Held Computer User Manual 95 Chapter 6: Configuration Scancode Remapping Preliminary Draft The Remap Scancode dialog box is displayed. • Type the scan code in hexadecimal in the field labelled Scancode Note: The Label field displays the default function of the scancode you are remapping. Virtual Key, Function And Macro The radio buttons at the bottom of the dialog box allow you to define to what the scan code will be remapped: Virtual Key, Function or Macro. When Virtual Key is selected, you can choose to force [SHIFT] to be on or off when the virtual key is sent. If No Force is selected, the shift state is dependent on whether the shift state is on or off at the time the virtual key is sent. When Function is selected, a list of valid functions appears in the dialog box. When Macro is selected, the macro keys available on your unit are listed in the dialog box. • • Choose Virtual Key, Function or Macro. Choose a function from the Function list in the dialog box, and tap on OK. Editing A Scancode Remap To edit a scancode: • • • 96 In the Scancode Remapping tab, tap the stylus on the remap you want to edit. Tap on the Edit button, and make the appropriate changes. Tap on OK to save your changes. Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Lock Sequence Removing A Remap To delete a remap: • • In the Scancode Remapping tab, highlight the scancode you want to delete, and tap on the Remove button. Tap on OK. 6.5.2.8 Lock Sequence The Lock Sequence tab allows you to lock the Warrington keyboard to prevent keys from being pressed accidentally when, for example, the unit is inserted in a holster. • • • To lock the keyboard, tap in the checkbox next to Enable key lock sequence. Tap in the checkbox next to Keyboard locked at startup. In the Key sequence dropdown menu, choose the key sequence you will need to type to unlock the keyboard. Note: It is useful to leave the ‘Show popup message’ enabled (default) so that anyone attempting to use the Warrington keyboard will see the key sequence they will need to enter to unlock the keyboard displayed on the screen. Warrington Hand-Held Computer User Manual 97 Chapter 6: Configuration Volume And Sound Properties Preliminary Draft A locked keyboard icon is displayed in the softkey bar when the keyboard is locked. Locked Keyboard Icon • 6.5.3 Type the key sequence to unlock the keyboard. Volume And Sound Properties • In the Control Panel, choose the Volume & Sounds icon. Figure 6.5 Choosing The Volume Icon 98 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Volume Adjustments 6.5.3.1 Volume Adjustments • • Slide the volume button to the left to lower the beeper volume or to the right to increase the beeper volume. Under the heading Enable sounds for, enable the conditions under which you want the Warrington to emit a beep. 6.5.3.2 Sound Adjustments This dialogue box allows you to assign sounds to identify a particular actions. For example, you can choose the sound your hand-held will emit when you close a program and choose another sound for a failed scan, etc. Warrington Hand-Held Computer User Manual 99 Chapter 6: Configuration Power Management Properties 6.5.4 Preliminary Draft Power Management Properties This icon displays a Power Properties dialog box that indicates the unit’s battery capacity and allows you to manage battery use. • In the Control Panel, choose the Power icon. 6.5.4.1 Battery Capacity • 100 In the Power Properties dialog box, open the Battery tab to view battery details. Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Power Saving Suspend 6.5.4.2 Power Saving Suspend • In the Power Properties dialog box, open the Suspend tab. Power Source This dialog box allows you to specify the suspend time for either AC Power or Battery Power. Suspend Timeout Important: Psion Teklogix recommends setting the Suspend value to 10 minutes. To further reduce power consumption, carefully consider the duration of time that the display backlight is ‘on’ (see “Display Backlight” on page 84). When the Warrington is idle – not receiving any user input (a key touch, a scan, and so on) or system activity (serial data, an activity initiated by an application, and so on) – the handheld uses the value assigned in the Suspend Timeout field to determine when the unit will go to sleep (appear to be off). When the time in the Suspend Timeout field elapses without any activity, the unit enters suspend state. In suspend state, the Warrington CPU enters a sleep state, and the radio is shut off. The state of the device (RAM contents) is preserved. Pressing [ENTER] wakes the system from suspend state. When the Warrington is in suspend state, the network connection will not be broken immediately. If the connection is dropped, you must re-establish the network connection. Warrington Hand-Held Computer User Manual 101 Chapter 6: Configuration Suspend Threshold Preliminary Draft 6.5.4.3 Suspend Threshold The Suspend Threshold lets you to determine when the Warrington will shut down. If the slider is left at the default value, Maximum Operating Time, the hand-held will run until the battery is completely empty; the RAM is only backed up for a short period of time. If you choose Maximum Backup Time, the hand-held will shut off with more energy left in the battery so RAM can be backed up for a longer period of time. Important: Selecting Maximum backup time will reserve approximately 20% of the battery capacity for memory backup. Once the battery is drained, the system RAM memory is lost and the unit must boot. In most real-time transaction environments this is not a problem (it only takes a few seconds to boot). Batch transaction environments, where data is not saved to a non-volatile memory (such as an SD FLASH card), may need to pay particular attention to this parameter. Psion Teklogix does not recommend the storage of any valuable data in system RAM. The Warrington Windows CE 5.0 environment does not store any critical data in RAM (such as the registry or file system). If the user's application does not save data to RAM, Psion Teklogix recommends keeping the Suspend Threshold setting as low as possible to maximize battery run time. 102 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Advanced 6.5.4.4 Advanced Allow Suspend With: This tab allows you to specify whether or not your unit will enter Suspend state while it is operating with an active PPP connection, network interface or active TCP/IP connection. Low Power Warnings The sliding scale at the bottom of this tab allows you to specify the remaining battery capacity at which a warning message is displayed on the Warrington screen, from 0% to 20%. 6.5.4.5 Devices This tab controls power to individual CF and SDIO slots, and built-in devices. Enable or disable the checkboxes as needed, then tap on OK to save your changes. Warrington Hand-Held Computer User Manual 103 Chapter 6: Configuration Stylus Properties 6.5.5 Preliminary Draft Stylus Properties Note: Touchscreen calibration may not be enabled on your unit. If your screen appears to require recalibration, contact your supervisor. • In the Control Panel, choose the Stylus icon. 6.5.5.1 Double-Tap • In the Double-Tap tab, follow the directions to tailor the sensitivity of the stylus when you tap on the touchscreen. 6.5.5.2 Calibration Touchscreens rarely require recalibration. However, if your touchscreen has never been calibrated or if you find that the stylus pointer is not accurate when you tap on an item, follow the directions below. 104 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Touch • Choose the Calibration tab, and then tap on the Recalibrate button. • Follow the directions in the Calibration tab to recalibrate the screen. 6.5.5.3 Touch This tab allows you to disable the touchscreen. • 6.5.6 Choose the Touch tab. Tap the checkbox next to Disable the touch panel. Manage Triggers This option allows you to configure how bar code scanners and other devices such as RFID readers are triggered. You can configure the trigger ID for each trigger button for both single- and double-click, and the double-click time. • In the Control Panel, choose the Manage Triggers icon. Figure 6.6 Manage Triggers Icon Warrington Hand-Held Computer User Manual 105 Chapter 6: Configuration Trigger Mappings • Preliminary Draft In the Manage Triggers screen you’ll see a list of trigger mappings. 6.5.6.1 Trigger Mappings A trigger mapping is an association between a particular key on the keyboard and a driver or application, the module(s) – sometimes referred to as “trigger consumer(s)” – of the trigger source. Along with keyboard keys, trigger sources can also be grip triggers, external hardware triggers or software-based. When the specified key is pressed, the trigger consumer (for example, a decoded scanner) is sent a message. Important: It is not possible to have two or more identical mappings—for example [F1] cannot be mapped to the Non-Decoded Scanner twice—even if the trigger type is different. A keyboard key that is used as a trigger source will no longer generate key data or perform its normal function. For example, if the space button is used as a trigger source, it will not be able to send space characters to applications. Double-Click When a key is pressed and released, then pressed again within the configured time (between 0 to 1000 milliseconds), a double-click occurs. See also “Trigger-Press Type” on page 108. Show All Modules By default, the trigger mapping list only shows active mappings. Mappings for drivers or applications that are not currently active are not normally displayed. By checking this checkbox, all mappings, both active and inactive, are displayed. 106 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Add And Edit Trigger Mapping Add Tapping this button brings up the Add Mapping dialog (see “Add And Edit Trigger Mapping” on page 107), so that you can add new trigger mappings. Edit Tapping this button brings up the Edit Mapping dialog (see “Add And Edit Trigger Mapping” on page 107), so that you can edit existing trigger mappings. Remove Tapping this button removes an existing mapping. OK The OK button in the top right of the Manage Triggers screen saves all changes made. If the cancel button X is tapped instead, or the [ESC] key is pressed, all changes made will be discarded. 6.5.6.2 Add And Edit Trigger Mapping These dialogs allow the user to add and edit trigger mappings. Trigger Key This drop-down list allows you to specify the source of the trigger events, such as the Grip Trigger, Left Scan, etc., for the trigger module selected. Warrington Hand-Held Computer User Manual 107 Chapter 6: Configuration Add And Edit Trigger Mapping Preliminary Draft Note: It is possible to map the same source to different modules (trigger consumers) – for example, to both the Imager and Non-Decoded Scanner. If so, both devices/operations will occur simultaneously. This is not recommended in most cases, especially with devices such as Imagers or RFID Readers. It is also possible to map different sources to the same module (trigger consumer). Add Key Only existing trigger sources are shown in the Source combo-box. To add a new source to this list, tap on the Add Key button. A dialog will pop up and allow you to select the keyboard key to use as a trigger source. Trigger-Press Type You can enable either an Up/Down or Double Click response to a trigger press. Normally, when a trigger (keyboard key, etc.) is pressed and released, a “trigger down” event is sent to the “owner”– that is, the application receiving the trigger press information—followed by a “trigger up”. If Double Click is chosen in this menu, when the trigger is pressed, released, and then pressed again, a “double-click” event will have occurred. If a mapping with the type Up/Down has also been configured for the same source, it will only receive the first set of trigger events. Module Trigger This identifies the driver or application receiving the trigger presses. Show All Modules By default, inactive owners are not shown. By checking this checkbox, all owners, both active and inactive, are displayed. 108 Warrington Hand-Held Computer User Manual Preliminary Draft 6.5.7 Chapter 6: Configuration Certificate Assignment Certificate Assignment • In the Control Panel, choose the Certificate icon. Figure 6.7 Certificates Icon This option is used in conjunction with 802.1x authentication to enhance Warrington security. For a detailed description about Certificate setup for both the server and client-side devices (Warrington hand-helds), refer to the following website: http://www.microsoft.com/windowsserver2003/techinfo/overview/security.mspx Note: When importing certificates, the Warrington only recognizes .cer files. Warrington Hand-Held Computer User Manual 109 Chapter 6: Configuration Bluetooth Setup 6.6 Preliminary Draft Bluetooth Setup Bluetooth is a global standard for wireless connectivity for digital devices and is intended for Personal Area Networks (PAN). The technology is based on a short-range radio link that operates in the ISM band at 2.4 GHz. When two Bluetooth-equipped devices come within a 10 meter range of each other, they can establish a connection. Because Bluetooth utilizes a radio-based link, it does not require a line-of-sight connection in order to communicate. Note: The Bluetooth radio uses an internal antenna. The Bluetooth radio is disabled by default. Before you begin the setup process: • In the Control Panel, tap on the Power icon. • Tap on the Devices tab, and tap in the checkbox next to Enable Bluetooth. Tap on OK. When the radio is enabled, a Bluetooth icon appears the taskbar at the bottom of the screen. It is ready for setup. • In the Control Panel, choose the Bluetooth icon. Figure 6.8 Bluetooth Icon The Bluetooth Manager dialog box displays the other Bluetooth devices with which you can communicate. 110 Warrington Hand-Held Computer User Manual Preliminary Draft 6.6.1 Chapter 6: Configuration The Devices Tab The Devices Tab If you intend to pair devices (a headset, for example), power on and bring the devices within 5 m (16.4 ft.) of the hand-held before proceeding with the discovery process described below. 6.6.1.1 Pairing A Device To pair devices: • Follow the manufacturer’s instructions to place the device you want to pair in pairing mode • Choose the Devices tab and Scan for devices in your area. • When the scan is complete, highlight the device you want to pair with and either doubleclick or press the Services button. • If a PIN dialog box appears, type your PIN and tap on OK. After entering the device PIN number, the Services dialog appears with a list of services available on that device. • To select a service, double-click on the service you want, or highlight the service and press the space bar. • In the drop-down list of options available, choose Active to pair the device. A COM/BSP port name will appear next to the service for this device. Your device is now paired. Scan • Click on the Scan button to list available devices. Warrington Hand-Held Computer User Manual 111 Chapter 6: Configuration Pairing A Device Preliminary Draft Figure 6.9 Available Bluetooth Devices Wait for the Warrington to complete its scan (approximately 20 seconds). When scanning starts, the Scan button will change to Stop—if necessary, you can tap on this button to stop the process. Once scanning is complete, all discovered devices will be displayed in the list box, with Name, Address, Active status, and PIN information. Note: During the scanning process, addresses are located first, followed by names. Only the names of devices that are within the Bluetooth radio coverage range will be retrieved. The Active column indicates whether any service is activated for that device. When a service is activated, the device is displayed in the list even when it is not detected during the scan. The PIN column indicates whether you have a PIN (password) set for the device. At this point you can either query for services or set the PIN for each device. Once you highlight a device in the list box, both the Services and Set PIN buttons become available. Services A discovered device may display several service profiles that it can use to communicate, and you will want to activate the type you need. Supported profiles that can be activated include: DUN (Dial-Up Networking service), Printer (serial service), Headset service and LANPPP (LANAccessUsingPPP service). ASync (ActiveSync) is another available profile. • To start the service scan, highlight a device in the Devices tab list, and then click on the Services button or double-click on the device entry. Note: If the remote device is out of reach or turned off, it can take a considerable amount of time for the Services dialog box to appear—it may appear to be frozen. 112 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Pairing A Device Once the device’s service profiles are displayed in the Services list box: • Highlight the service to be activated. • Press [SPACE] or right-click to display the Activation menu. The Activation menu contains four options: Activate, Authenticate, Outgoing, and Encrypt. Once the service is successfully activated, the assigned port (if applicable) will appear in the Port column of the Services list box. You can choose to use BSP or COM as the port name. BSP is the latest Microsoft Bluetooth stack standard, but older applications assume serial ports are COM. When using COM as the port name, the Bluetooth manager will try to find and use a free port between COM7 and COM9. When using BSP as the port name, BSP2 to BSP9 are available for use. The port is available as soon as it is activated. Note: The CH column shows the RFCOMM channel of the service if the service is RFCOMM-based. This information is not generally needed except for debugging purposes. To add a service to the Outgoing port, an active service must first be deactivated. Then you can choose the Outgoing option from the Activation menu (highlight a service, right-click or press the [SPACE] bar to display the Activation menu). The Authentication and Encryption options can be changed only before activation. To change these after activation, deactivate the service first, then change the options. Once a service is activated, all the information regarding the service, including the RFCOMM channel number, is saved in the registry. (Some remote devices may change their RFCOMM channel numbers when they reboot, so your saved setting may not work when the remote device is rebooted. In that case, you must deactivate the service and reactivate it to detect the current RFCOMM channel.) Set PIN PINs can be set for each device by pressing the Set PIN button in the Devices tab, or you can skip this step and try to connect to the device first. Important: The remote device must have authentication enabled, otherwise the PIN authentication will fail. • Highlight a device, click on the Set Pin button, and type the PIN. You will receive a message, either that the PIN has been successfully validated or that it has been rejected. Warrington Hand-Held Computer User Manual 113 Chapter 6: Configuration The Servers Tab Preliminary Draft If the PIN has been validated, an asterisk (*) appears in the PIN column in the Devices list box, indicating that this device has a PIN set. Once a PIN is entered, it is saved in the registry. To remove the PIN: • Choose Set PIN, and press [ENTER]. If the Warrington attempts to connect to a remote device that has Authentication enabled and does not have a required PIN set, an Authentication Request dialog box appears. • 6.6.2 Enter the PIN, and tap on OK to connect the devices. The Servers Tab The Bluetooth connection is initiated from your Warrington to the remote device. Therefore the Warrington is called the ‘client’ and the remote is called the ‘server’. The Servers tab displays the server profiles that can be activated in your hand-held. There is currently one server profile available: Serial. • Tap on the checkbox to activate the server, and it will display the associated port name beside the server name. Once you activate a server profile, it is recommended that the Warrington be rebooted before you try to bond from a server. Note: You do not need to reboot if you are deactivating a server. 114 Warrington Hand-Held Computer User Manual Preliminary Draft 6.6.3 Chapter 6: Configuration Outgoing Tab Outgoing Tab Outgoing Port acts as a serial port that can be used to connect to a list of Bluetooth devices (one at a time), but you have the freedom to switch on-the-fly. The Outgoing Port checkbox allows you to create the Outgoing port. When the port is created, the Outgoing tab lists the port name. The Outgoing list dialog box displays a list of services marked as ‘Outgoing’. The * column indicates the currently selected service. You can tap on Unselect to reset the current selection, or you can tap on Select to make a selection. The Remove button deletes the service from the outgoing list. The Prompt menu determines the behaviour of the pop-up Selection menu. Choosing Everytime causes the Selection menu to be displayed each time an outgoing port is created. If you choose Once, the menu is displayed only when a partner service is not selected. To display the Selection menu at any time: • Press [CTRL] [ALT] [F1], and switch the partner Bluetooth device. If a connection to a partner device already exists, the connection is dropped and another connection to the newly selected device is created instantly without disrupting the application that has opened the outgoing port. Note: To add a service to the Outgoing port, an active service must first be deactivated. Then you can choose the ‘Outgoing’ option from the Activation menu (highlight a service, right-click or press the [SPACE] bar to display the Activation menu). Warrington Hand-Held Computer User Manual 115 Chapter 6: Configuration Active Conn. Tab 6.6.4 Preliminary Draft Active Conn. Tab The Active Conn. tab lists the Name, Address, and Type of the currently active connections. The table is periodically updated, but it can take a few seconds before it reflects the actual list of connections. The Type column of the table shows ‘ACL’ or ‘SCO’. The Connection list table shows the connections for scanning as well as the service connections. Note: You can change the device-name and description of your radio by clicking on the System icon in Control Panel, which will open the System Properties dialog box. Click on the Device Name tab to access the menu and change your settings. Then click on OK. Although the name will have changed in the Properties menu in Bluetooth Controls, the radio only reads it on boot-up. For the changes to take effect, you must reset the Warrington (for reset instructions, see “Resetting The Warrington” on page 33). 116 Warrington Hand-Held Computer User Manual Preliminary Draft 6.6.5 Chapter 6: Configuration The Properties Tab The Properties Tab The Properties tab displays information about your Warrington, and provides some port options. The Device Name field shows the device name of your Warrington. This name can be changed (see the Note on the previous page for details). Device Class shows the Class of Device (e.g. desktop, hand-held), which is always set to Handheld. Local Bluetooth Address shows the address of your Warrington radio. Port Prefix is used to set the port name to either BSP or COM. When the name is set to BSP, BSP2 to BSP9 are available for activated services (including the server). When COM is chosen, COM7 to COM9 are available. NQuery Retry (Name Query Retry) governs the number of times the hand-held will attempt to query the names of other Bluetooth devices if the first attempt fails. (When the Warrington scans for other devices, it sometimes fails to scan names.) Note: Keep in mind that setting this parameter to a higher value will lengthen the scan time. Warrington Hand-Held Computer User Manual 117 Chapter 6: Configuration The Search For Tab 6.6.6 Preliminary Draft The Search For Tab The Search For tab allows you to specify the services for which the Bluetooth radio will scan. 6.6.7 The Bluetooth GPRS WAN Connection The following steps describe how to set up an internet data connection using a GSM cellular telephone with Bluetooth. The Warrington communicates via Bluetooth to the cell phone, which then accesses a WAN (Wide Area Network) and transfers data using GPRS. 1. To set up the internet parameters, choose the Network And Dial-up Connections icon from the Control Panel 118 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration The Bluetooth GPRS WAN Connection 2. Choose the Make New Connection icon. 3. In the Make New Connection dialog box, choose Dial-Up Connection. Enter a name for your GPRS network connection. Warrington Hand-Held Computer User Manual 119 Chapter 6: Configuration The Bluetooth GPRS WAN Connection Preliminary Draft 4. Choose the Next button to display the Modem dialog box. 5. In the drop-down menu labelled Select a modem, choose the name of the modem with which you want to connect, and then choose the Configure button to display the Device Properties dialog box. The Warrington communicates via Bluetooth to your Bluetooth-equipped cellular telephone and retrieves the parameters for the Device Properties dialog box. The Warrington then disconnects. 120 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration The Bluetooth GPRS WAN Connection 6. Under the Call Options tab, turn off Cancel the call if not connected within, and press [ENTER] to save your changes. 7. In the Modem dialog box, choose the Next button to display the Phone Number dialog box. The phone number you enter is network carrier dependent. Once you’ve specified all the necessary information, choose the Finish button. Warrington Hand-Held Computer User Manual 121 Chapter 6: Configuration The Bluetooth GPRS WAN Connection Preliminary Draft 8. In the Control Panel, choose the Dialing icon. 9. The values in the Dialing Properties dialog box need to be edited according to your network carrier specifications. Once you’ve edited this dialog box to reflect your network carrier requirements, press [ENTER] to save your changes. 10. At this point, you’ll need to return to the Control Panel, and choose the Network and Dial-up Connections icon. 122 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Total Recall 11. In the network connection window, the new network configuration, in this case GPRS Network is displayed. Tap on the new icon. When you tap on your new connection, an onscreen message indicates the status of your connection: connected, disconnected, error messages, and so on. 6.7 Total Recall Total Recall is a Psion Teklogix utility developed to maintain applications and settings during a cold boot. This utility is based on a backup and restore concept. • In the Control Panel, choose the Total Recall icon Warrington Hand-Held Computer User Manual 123 Chapter 6: Configuration Creating A Backup Profile 6.7.1 Preliminary Draft Creating A Backup Profile In the drop-down menu, you can choose from four options: Create Backup Profile, View Selected Profile, Restore Selected Profile and Delete Selected Profile. Keep in mind however that until a profile is created, the only available option is Create Backup Profile. • Choose the Next button to begin the process. Profile Information This dialog box lists the possible storage destinations for the profile file. 1. To begin, type a name for the profile in the field labelled Profile Name. 2. Choose the Profile Type you want to create: For this device only—creates a backup that is manually restored by the operator. 124 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Creating A Backup Profile AutoRestore for this device only—creates a profile that automatically restores itself following a restart. AutoRestore for this and other devices—creates a profile that automatically restores after resuming from a restart, but it will not contain the touchscreen calibration coordinates or the Wireless radio settings. 3. Finally, choose a Profile Location —The location for the profile is either \Flash Disk or \SD-MMC Card. 4. Tap on the Next button to display the next dialog box Add Files. Add Files By default, All Files is selected so that all installed or copied files, database entries, and the Registry will be saved. You can, however, limit the backup to databases, and/or the registry only. By tapping the checkbox next to these items, you can add or remove a check mark to enable or disable the option. The Select Files option allows you to select predefined file types. • Remove the check mark next to All Files. You’ll notice the checkbox next to Select Files changes , indicating that additional options are available. Warrington Hand-Held Computer User Manual 125 Chapter 6: Configuration Creating A Backup Profile • Choose this icon Preliminary Draft next to Select Files to view your options. Choosing By Individual File displays a pop-up menu where you can tailor the list of files you want to back up. To add a file to your backup list: • Choose Add Files. Browse to and choose the files you want to add to your list. To remove a file from your backup list: • • 126 Choose Remove Files—a dialog box is displayed listing the files that will be backed up. Highlight the item you want to remove from the list, and tap on the Remove button. Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Creating A Backup Profile Choosing By File Type allows you to select the file types that you want backed up. View Selections Depending on what you have selected for inclusion in your profile, you can view a list of the selected files, databases and/or registry. • Choose the Next button to perform the operation. Warrington Hand-Held Computer User Manual 127 Chapter 6: Configuration Restoring A Profile Preliminary Draft Perform The Operation • 6.7.2 Choose the Backup button to start the process, and create a profile. Restoring A Profile To manually restore a profile: • Choose Restore Selected Profile from the drop-down menu, and choose the Profile Name displayed in the drop-down menu. Note: You can also manually restore an auto restore profile located in flash or a storage device. 6.8 The Storage Manager The Storage Manager allows the user to view information about the microSD card present in the Warrington. 6.8.1 Formatting A Memory Card Formatting a memory card bulk-erases it. Once a card is erased, partitions may be created in it, similarly to those on a hard drive. Memory-card devices are normally ‘mounted’ (made available to the system) automatically when they are inserted. They must be dismounted before they can be formatted. To format an entire memory card: 1. Choose Start> Settings>Control Panel. 128 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Creating Partitions 2. In Control Panel, double-click on the Storage Manager icon. The Storage Manager menu opens: 3. Choose the memory card from the drop-down list. 4. Press the Dismount button to dismount the memory card. All partitions on the card will be dismounted. 5. Press the Format button to format the memory card. All partitions and information on the card will be erased during the formatting process. 6.8.2 Creating Partitions Once the card is formatted, new partitions can be created in it. The default is to create one partition that occupies the whole card, but a card can be divided into more than one partition if desired. Each partition appears as a separate folder in Windows Explorer. To create new partitions: 1. Tap the New button next to the Partitions list box. The Create New Partition dialog box appears: Warrington Hand-Held Computer User Manual 129 Chapter 6: Configuration Creating Partitions Preliminary Draft 2. Type a name for the partition. 3. If more than one partition is desired, uncheck the Use All Available Disk Space checkbox, then specify the desired number of sectors to be used by the partition: Note: The sector size of the card is given on the left-hand side of the Storage Properties dialog. 4. Tap OK. The new partition appears in the Partitions list: The new partition is automatically mounted. This is indicated by an asterisk (*) next to its name in the partition list. Any unallocated space on the card is indicated at the left, and additional partitions can be created in it. 130 Warrington Hand-Held Computer User Manual Preliminary Draft 6.8.3 Chapter 6: Configuration Partition Management Partition Management Partitions can be individually dismounted, mounted, deleted, or formatted as well. These and additional tasks are available from the Partition Properties dialog: To dismount a partition: • • • Choose the desired partition. Tap the Properties button. The Partition Properties dialog appears. Tap the Dismount button. The partition is dismounted. The asterisk disappears next to its name in the partitions list. To delete a partition: • Select the desired partition. • Tap the Delete button. A warning dialog appears. • Tap the OK button. The partition is deleted. To format a partition: 1. Choose the desired partition. 2. Tap the Properties button. The Partition Properties dialog appears. 3. Tap the Dismount button. The partition is dismounted. The asterisk disappears next to its name in the partitions list. Warrington Hand-Held Computer User Manual 131 Chapter 6: Configuration Partition Management Preliminary Draft 4. Tap the Format button. The Format dialog appears: 5. Choose your format options. These options include: • Version of file system (FAT-16, for devices holding up to 4 GB; or FAT-32, for devices containing up to 32 GB). • Number of FATs (File-Allocation Tables). • Number of entries allowed in the root directory. • Cluster size (.5 KB to 64 KB). There are also two checkboxes, which govern: • Whether to use the transaction-safe FAT file system (TFAT). This file system keeps multiple copies of the file-allocation table, changing one while maintaining another as a backup. • Whether to perform a quick format. Quick formatting removes all reference to data in the partition without erasing the actual partition. The partition will be treated as empty, and new data will overwrite it. 6. Tap Start. The partition is formatted. To mount a partition: • • • 132 Choose the desired partition. Tap the Properties button. The Partition Properties dialog appears. Tap the Mount button. The partition is mounted. The asterisk appears next to its name in the partitions list. Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration IPv6 Support The Partition Properties dialog has buttons for additional functions. Partitions can be defragmented, and their file structure can be scanned. 6.9 IPv6 Support The IPv6 Support icon in the Control Panel allows you to activate IPv6 network support on your unit if your network setup requires this. This internet protocol specification (version 6) supports 128-bit IP addresses, replacing version 4. Figure 6.10 IPv6 Support Icon • Choose the IPv6 Support icon to display the associated dialog box. • Choose the checkbox next to Enable IPv6 Network Support to enable this internet protocol. Warrington Hand-Held Computer User Manual 133 Chapter 6: Configuration Scanner Settings 6.10 Preliminary Draft Scanner Settings The Teklogix Scanners icon in the Control Panel provides dialog boxes in which you can tailor bar code options and choose the bar codes your scanner will recognize. The parameters are preset with the default settings of the decoded scanner installed in the unit. Figure 6.11 Teklogix Scanners Icon For a listing of available scanners and their specifications, please refer to Chapter 8: “Specifications”. 6.10.1 Bar Codes 134 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Scanner 6.10.1.1 Scanner The drop-down menu to the right of the Scanner option allows you to choose from one of the following scanner types used with your hand-held: Decoded (internal), Decoded (HHP), Decoded (ISCP), and Imager. The symbologies listed change to reflect the scanner you choose and the bar codes it supports. Important: To improve the decode speed and performance, enable only those codes that are required by the application. Keep in mind that some bar code types are only available when an internal imaging scanner is installed. All internal scanners can be configured using the Barcode dialog boxes. 6.10.1.2 Restoring Default Settings If you want to restore the factory defaults after making changes, the defaults can be applied to a selected parameter, sub-tree of parameters or all scanner parameters. • Press and hold the stylus on a symbology (e.g., Code 128) to display a pop up a menu. • Choose Default subtree to reset only the parameters in the symbology you selected, or choose Default all settings to reset all scanner parameters to default settings. To reset a single parameter to its default setting: Warrington Hand-Held Computer User Manual 135 Chapter 6: Configuration Decoded (Internal) Scanners Preliminary Draft • Press and hold the stylus on the parameter you want to reset. • Choose Default parameter to reset the parameter to the default setting. 6.10.2 Decoded (Internal) Scanners • Tap on the Scanner drop-down menu, and choose Decoded (internal). 6.10.2.1 Options Note: Some options are available only for specific scanners. Refer to the option names in this section for scanner model identification. 136 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Decoded (Internal) – Advanced Options Dot Time (msec) The value selected for “Dot Time (msec)” determines (in milliseconds) how long the targeting dot remains on before the scanner switches to a normal scan sweep. When you doubletap on this parameter, a dialog box is displayed in which you can enter a value of 0 msec, 200 msec or 400 msec. A value of 0 (zero) disables the target dot. Aim Duration This parameter determines the total time the aiming pattern appears before the scanner laser begins sweeping. When you double-tap on this parameter, a dialog box is displayed in which you can enter a value from 0 to 30 (0 to 3 sec.). A value of 0 (zero) disables the aiming-dot. Laser On Time The value assigned to this parameter determines how long the laser will remain on when the scan button or trigger is pressed. Double-tapping on this parameter displays a dialog box in which you can enter a value between 5 and 99, each number representing 0.1 seconds. 6.10.2.2 Decoded (Internal) – Advanced Options Continuous Scan Mode Setting this parameter to on keeps the laser on and continuously decoding as long as the scanner button is pressed and held down. Minimum Cancel Time The value assigned to this parameter determines the time delay before the scanner is turned off, once the scanner trigger or button is released. This gives the scanner a minimum amount of time to complete its current decode before the scan is cancelled when the user quickly triggers on/off. Low Power Timeout To extend laser life, you can select the time the scanner remains active following a successful decode. The scanner wakes from low power mode when a bar code is scanned—a successful decode restores normal blinking. This is only used if the unit’s Trigger Mode has been changed to Continuous On. If the unit is used in a fixed mount this parameter might be used, but not if the unit is used as a handheld. When you double-tap on this parameter, a dialog box is displayed in which you can choose a value of 30 sec., 1 min., 2 min., or 3 min. Warrington Hand-Held Computer User Manual 137 Chapter 6: Configuration Decoded (Internal) – Advanced Options Preliminary Draft Parameter Scanning Setting this parameter to on enables decoding of parameter bar codes. Linear Security Level This parameter allows you to select the security level appropriate for your bar code quality. There are four levels of decode security for linear code types (e.g., Code 39, Interleaved 2 of 5). Higher security levels should be selected for decreasing levels of bar code quality. As security levels increase, the scanner’s decode speed decreases. Double-tapping on this parameter displays a dialog box in which you can enter a value from 1 to 4. Linear security level 1 specifies that the following code types must be successfully read twice before being decoded: Code Type Length Codabar All MSI Plessey 4 or less D 5 of 5 8 or less I 2 of 5 8 or less Linear security level 2 specifies that all types of codes must be successfully read twice before being decoded. Linear security level 3 specifies that code types other than the following must be successfully read twice before being decoded. The following codes must be read three times: Code Type Length MSI Plessey 4 or less D 2 of 5 8 or less I 2 of 5 8 or less Linear security level 4 requires that all code types be successfully read three times before being decoded. Bi-Direction Redundancy Note: This parameter is only valid if a” Linear Security Level” is enabled. 138 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Decoded (Internal) – 2D Scanning Options When this parameter is enabled, a bar code must be successfully scanned in both directions (forward and reverse) before being decoded. 6.10.2.3 Decoded (Internal) – 2D Scanning Options Scanning Mode When you double-tap on this parameter, a dialog box is displayed in which you can choose one of the following scanning modes: Smart Raster, Always Raster, Programmable Raster, Slab Pattern, Cyclone Pattern, or Semi-Omni Pattern. Raster Height And Raster Expand Rate These parameters determine the laser pattern’s height and rate of expansion. Note: These parameters are only used when either Programmable Raster or Always Raster is assigned to the “2D Scanning Mode” parameter. “2D Raster Height” and “2D Raster Expand Rate” are intended for very specific applications and are usually not required for normal scanning purposes. Double-tapping on this parameter displays a dialog box in which you can enter a value from 1 to 15. 6.10.2.4 Decoded (Internal) Data Options Transmit Code ID Char A code ID character identifies the scanned bar code type. In addition to any single character prefix already selected, the code ID character is inserted between the prefix and the decoded symbol. When you double-tap on this parameter, a dialog box is displayed in which you can choose a transmit code: None, AIM, or Symbol. Scan Data Format This parameter allows you to change the scan data transmission format. Double-tapping on Scan Data Format displays the following options from which you can choose a data format: data (as-is), data [S1], data [S2], data [S1][S2], [P] data, [P] data [S1], [P] data [S2], and [P] data [S1][S2]. Prefix [P], Suffix [S1] And Suffix [S2] A prefix and/or one or two suffixes may be appended to scan data for use in data editing. When you double-tap on these parameters, a dialog box is displayed in which you can enter a value from 0 to 255. Warrington Hand-Held Computer User Manual 139 Chapter 6: Configuration Code 39 Preliminary Draft Delete Char Set ECIs Setting this parameter to on enables the scanner to delete any escape sequences representing Character Set ECIs—Extended Channel Interpretations (also known as GLIs) – from its buffer before transmission. When this parameter is enabled, the scanner transmits data from PDF417 and MicroPDF417 bar codes containing Character Set ECIs, even when the ECI Protocol is disabled. ECI Decoder Setting this parameter to on enables the scanner to interpret any Extended Channel Interpretations (ECIs) supported by the scanner. This parameter has no effect on symbols that were not encoded using ECIs. If this parameter is set to OFF and a symbol that was encoded using an ECI escape is scanned, the scanner transmits the ECI escape followed by the data that was not interpreted. 6.10.2.5 Code 39 Enabled Setting this parameter to on enables “Code 39”. Enable Trioptic Code 39 Note: “Trioptic Code 39” and “Full ASCII” should not be enabled simultaneously. The scanner does not automatically discriminate between these two symbologies. Trioptic Code 39 symbols always contain six characters. Setting this parameter to on allows this type of symbology to be recognized. Convert To Code 32 Note: “Code 39” must be enabled in order for this parameter to function. Setting this parameter to on allows the scanner to convert the bar code from “Code 39” to “Code 32”. Code 32 Prefix Note: “Convert to Code 32” must be enabled in order for this parameter to function. 140 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Code 39 When this parameter is enabled, the prefix character “A” is added to all “Code 32” bar codes. Set Length L1 And Set Length L2 Lengths for “Code 39” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be decoded by your scanner Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 1 to 55. Check Digit Verification When this parameter is enabled, the integrity of a “Code 39” symbol is checked to ensure that it complies with specified algorithms. Note: Only those “Code 39” symbols that include a Mod 43 check digit are decoded when this parameter is enabled. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must to enabled. Full ASCII If this parameter is enabled, the characters +, %, and / are used as escape characters. The combination of an escape character and the next character is converted to an equivalent ASCII character. Warrington Hand-Held Computer User Manual 141 Chapter 6: Configuration Code 39 Preliminary Draft Decode Performance If this parameter is enabled, one of three decode levels can be chosen in the Decode Performance Level parameter. Decode Perf. Level This parameter provides three levels of decode performance or “aggressiveness” for Code 39 symbols. Increasing the performance level reduces the amount of required bar code orientation—this is useful when scanning very long and/or truncated bar codes. Keep in mind that increased levels reduce decode security. When you double-tap on this parameter, a dialog box is displayed in which you can enter a decode performance level of between 1 and 3. Field Size/Chars Field Size The field size is the length of the field after the first character is stripped and the prefix and suffix characters are added. If the field size is non-zero, only bar codes of that length are passed through. Prefix Char This character, if non-zero, is added before a successfully decoded bar code. Press the key you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key value of the keypress is displayed. Suffix Char This character, if non-zero, is added after a successfully decoded bar code. Press the key you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key value of the keypress is displayed. Strip Leading This parameter determines the number of characters that will be removed from the beginning of the bar code before the prefix character is added. Note: For Code 39 bar codes, the “AIAG Strip” is performed before the “Strip Leading”. Strip Trailing The value entered in this parameter determines the number of characters that will be removed from the end of the bar code before the suffix character is added. 142 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Code 128 6.10.2.6 Code 128 Enabled Set this parameter to on to enable “Code 128”. Enable GS1-128/GS1 US Previously UPC/EAN and UCC, these types of bar codes include group separators and start codes. Enable ISBT 128 To successfully scan this variation, “Enable ISBT 128” must be set to on. Decode Performance If this parameter is set to on, one of three decode levels assigned to the Decode Performance Level parameter can be selected. Decode Perf. Level This parameter provides three levels of decode performance or “aggressiveness” for Code 128 symbols. Increasing the performance level reduces the amount of required bar code orientation—this is useful when scanning very long and/or truncated bar codes. Keep in mind that increased levels reduce decode security. When you double-tap on this parameter, a dialog box is displayed in which you can enter a decode performance level of between 1 and 3. Field Size/Chars Refer to page 142 for details. 6.10.2.7 EAN 13 Enabled Set this parameter to on to enable “EAN 13”. Prefix/Suffix Prefix Char This character, if non-zero, is added before a successfully decoded bar code. Press the key you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key value of the keypress is displayed. Warrington Hand-Held Computer User Manual 143 Chapter 6: Configuration EAN 8 Preliminary Draft Suffix Char This character, if non-zero, is added after a successfully decoded bar code. Press the key you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key value of the keypress is displayed. Strip Leading This parameter determines the number of characters that will be removed from the beginning of the bar code before the prefix character is added. Note: The appended character is treated as any other keyboard character. For example, if [BKSP] is pressed, the usual action for that key is performed. Strip Trailing The value entered in this parameter determines the number of characters that will be removed from the end of the bar code before the suffix character is added. 6.10.2.8 EAN 8 Enabled Set this parameter to on to enable “EAN 8”. EAN-8 Zero Extend When this parameter is enabled, five leading zeros are added to decoded EAN-8 symbols, making them compatible in format to EAN-13 symbols. Disabling this parameter returns EAN-8 symbols to their normal format. Prefix/Suffix See “Prefix/Suffix” on page 143. 6.10.2.9 UPC A Enabled Set this parameter to on to enable “UPC A”. UPC-A, Check Digit If you enable this parameter, the check digit is included with the decoded bar code data. UPC-A, Preamble When you double-tap on this parameter, a dialog box is displayed where you can choose one of three options for lead-in characters for UPC-A symbols transmitted to the host device: 144 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration UPC E System Char—system character transmitted with the data, Country Code and System Char—both the country code (“0” for USA) and system character are transmitted with the data, or None—no preamble is transmitted. The lead-in characters are considered part of the symbol. Prefix/Suffix See “Prefix/Suffix” on page 143. 6.10.2.10 UPC E Enabled UPC-E Set this parameter to on to allow “UPC E” bar code scans. Enabled UPC-E1 Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans. UPC-E And UPC-E1 Check Digit If you enable one or both of these parameters, a check digit is included with the decoded bar code data. UPC-E And UPC-E1 Preamble When you double-tap on one of these parameters, a dialog box is displayed where you can choose one of three options for lead-in characters for UPC-E and UPC-E1 symbols transmitted to the host device: System Char—system character transmitted with the data, Country code and System Char—both the country code (“0” for USA) and system character are transmitted with the data, or None—no preamble is transmitted. The lead-in characters are considered part of the symbol. Conv. UPC-E To UPC-A This parameter converts UPC-E (zero suppressed) decoded data to UPC-A format before transmission. After conversion, data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit). Warrington Hand-Held Computer User Manual 145 Chapter 6: Configuration UPC/EAN Shared Settings Preliminary Draft Conv. UPC-E1 To UPC-A This parameter converts UPC-E1 (zero suppressed) decoded data to UPC-A format before transmission. After conversion, data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit). Prefix/Suffix Refer to “Prefix/Suffix” on page 143. 6.10.2.11 UPC/EAN Shared Settings The parameters you set here are a shared across all available UPC and EAN bar codes. Enable Bookland EAN Setting this parameter to on allows your scanner to recognize Bookland EAN bar codes. Supplementals Supplementals are additionally appended characters (2 or 5). Double-tapping this parameter displays a list of options. If Ignore is chosen, UPC/EAN is decoded and the supplemental characters are ignored. If Decode is chosen, UPC/EAN symbols are decoded with supplementals. Autodiscriminate works in conjunction with the Supp. Redundancy parameter. Supp. Redundancy With “Autodiscriminate” selected in the Supplementals parameter, Supp. Redundancy adjusts the number of times a symbol without supplementals is decoded before transmission. When you double-tap on this parameter, a dialog is displayed in which you can enter a value between 2 and 20. A value of 5 or above is recommended when Autodiscriminate is selected and you are decoding a mix of UPC/EAN symbols with and without supplementals. Security Level This parameter controls the tolerance for decoding edge-to-edge UPC/EAN bar codes. Double-tapping on this parameter displays a dialog box in which you can choose a level from 0 to 3. Lower values have a lower tolerance for misreads, but they also increase the time it takes to decode the bar code. Linear Decode Linear Decode applies to code types containing two adjacent blocks (e.g., UPC-A, EAN-8, EAN-13). When enabled, a bar code is transmitted only when both the left and right blocks 146 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Code 93 are successfully decoded within one laser scan. This option should be enabled when bar codes are in proximity to each other. 2D UPC Half Block Stitching Setting this parameter to on enables “UPC Half Block Stitching” for the omnidirectional scanner engine only. 6.10.2.12 Code 93 Enabled Set this parameter to on to enable “Code 93”, or OFF to disable it. Set Length L1 And Set Length L2 Lengths for “Code 93” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be recognized by your scanner. Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 4 to 55. Field Size/Chars Refer to page 142 for details. 6.10.2.13 Codabar Enabled Set this parameter to on to enable “Codabar”. Set Length L1 And Set Length L2 Lengths for “Codabar” can be set for Any length, Length within a range, One discrete length, or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be recognized by your scanner. Warrington Hand-Held Computer User Manual 147 Chapter 6: Configuration MSI Plessey Preliminary Draft Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 5 to 55. CLSI Editing When enabled, this parameter strips the start and stop characters and inserts a space after the first, fifth, and tenth characters of a 14-character Codabar symbol. Note: Symbol length does not include start and stop characters. NOTIS Editing When enabled, this parameter strips the start and stop characters from decoded Codabar symbol. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.2.14 MSI Plessey Enabled Set this parameter to on to enable “MSI Plessey”. Set Length L1 And Set Length L2 Lengths for “MSI Plessey” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be recognized by your scanner. Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 6 to 55. Check Digits Double-tapping on this parameter displays a dialog box in which you can choose One or Two check digit(s). 148 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Interleaved 2 of 5 If this parameter is set to One, it is assumed that the last digit is a check digit. If “Check Digits” is set to Two, it is assumed that the last two digits are check digits. Note: If Two check digits is selected, an MSI Plessey “Check Digit Algorithm: must also be selected. See below for details. Transmit Check Digit If this parameter is enabled, the check digit is included with the bar code data. Check Digit Algorithm When the Two MSI Plessey check digits option is selected, an additional verification is required to ensure integrity. Double-tapping on this parameter displays a dialog box n which you can choose the algorithm to be used: MOD 10/MOD 11 or MOD 10/MOD 10. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.2.15 Interleaved 2 of 5 Enabled Set this parameter to on to enable “Interleaved 2 of 5”. Set Length L1 And Set Length L2 Lengths for “Interleaved 2 of 5” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be recognized by your scanner. Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 4 to 14. Check Digit Verification When enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it complies with a specified algorithm—either USS (Uniform Symbology Specification) or OPCC (Optical Product Code Council). Warrington Hand-Held Computer User Manual 149 Chapter 6: Configuration Discrete 2 of 5 Preliminary Draft Transmit Check Digit If this parameter is enabled, the check digit is included with the bar code data. Convert To EAN 13 If this parameter is enabled, the I 2 of 5 bar code is converted to EAN 13. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.2.16 Discrete 2 of 5 Enabled Set this parameter to on to enable “Discrete 2 of 5”. Set Length L1 And Set Length L2 Lengths for “Discrete 2 of 5” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be recognized by your scanner. Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 1 to 12. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.2.17 RSS Code Enable Setting this parameter to on enables “2D RSS Code” scanning capability. Enable RSS-14 (Reduced Space Symbology) RSS-14 code can be either purely linear or split in half with one half stacked on top of the other half. Stacking the code reduces the bar code length, and providing the nominal height of the code is maintained, it can be omni-directionally scanned. 150 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Composite Enable RSS Limited “RSS-Limited” is restricted, in that it can only encode 14 digit GTINs (global trade item number) that begin with either a 0 or a 1. It is not stackable and is not designed to be read omni-directionally. Enable RSS Expanded “RSS Expanded” uses the same application identifiers as UCC/EAN-128 codes but it can be split into sections and stacked several rows high, reducing the length of the symbol, while increasing the capacity of data that can be stored. “RSS Expanded” code can be omnidirectionally scanned. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.2.18 Composite Important: To successfully read this type of bar code, the two types of symbologies included in a composite bar code must be enabled. In addition, “Center Bar Code Only” must be disabled. A composite symbol includes multi-row 2D components making it compatible with linear and area CCD scanners along with linear and rastering laser scanners. The options available for this parameter represent multi-level components of a composite symbol. Enable CC-C And Enable CC-AB To activate these components, set these parameters to on. Enable TLC-39 This composite component integrates MicroPDF417 with the linear code. Setting this parameter to on enables this parameter. 6.10.2.19 PDF-417 Enable Setting this parameter to on enables PDF-417 two dimensional (2D) coding. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. Warrington Hand-Held Computer User Manual 151 Chapter 6: Configuration Micro PDF-417 Preliminary Draft 6.10.2.20 Micro PDF-417 Enable Setting this parameter to on enables “Micro PDF-417” bar code scanning. Micro PDF-417 is a multi-row symbology that is useful for applications requiring greater area efficiency but lower data capacity than PDF-417. Code 128 Emulation When this parameter is enabled, the scanner transmits data from certain Micro PDF-417 symbols as if it was encoded in Code 128 symbols. If Code 128 Emulation is enabled, the following Micro PDF-417 symbols are transmitted with one of the following prefixes: ]C1 if the first codeword is 903-907, 912, 914, 915 ]C2 if the first codeword is 908 or 909 ]C0 if the first codeword is 910 or 911 If Code 128 Emulation is set to off, the Micro PDF-417 symbols are transmitted with one of the following prefixes: ]L3 if the first codeword is 903-907, 912, 914, 915 ]L4 if the first codeword is 908 or 909 ]L5 if the first codeword is 910 or 911 Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 152 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Decoded (ISCP) 6.10.3 Decoded (ISCP) • Tap on the Scanner drop-down menu, and choose Decoded (ISCP). 6.10.3.1 Decoded (ISCP) – Options Laser On Time The value assigned to this parameter determines how long the laser will remain on when the scan button or trigger is pressed. Double-tapping on this parameter displays a dialog box in which you can enter a value between 1 and 10 seconds. 6.10.3.2 Decoded (ISCP) – Advanced Options Continuous Scan Mode Setting this parameter to on keeps the laser on and continuously decoding as long as the scanner button is pressed and held down. Minimum Cancel Time The value assigned to this parameter determines the time delay before the scanner is turned off, once the scanner trigger or button is released. This gives the scanner a minimum amount of time to complete its current decode before the scan is cancelled when the user quickly triggers on/off. Warrington Hand-Held Computer User Manual 153 Chapter 6: Configuration Code 39 Preliminary Draft Low Power Timeout To extend laser life, you can select the length of time the scanner remains active following a successful decode. The scanner wakes from low power mode when a bar code is scanned—a successful decode restores normal blinking. When you double-tap on this parameter, a dialog box is displayed in which you can choose a value of 30 sec, 1 min, 2 min, or 3 min. Note: This parameter is only used if the Trigger Mode has been set to Continuous On and the hand-held is mounted in a fixed position; otherwise, ‘Low Power Timeout’ is not used. Parameter Scanning Setting this parameter to Enabled allows decoding of parameter bar codes. Same Read Validate The data is only transmitted after repeated reads give the same result. The value assigned at this parameter determines the number of reads required, from 0 to 10 times. Same Read Timeout Prevents the same bar code from being read more than once. The value assigned determines after what time period the scanner will timeout, from 0 to 2550 msec. Diff Read Timeout Prevents unwanted reading of other bar codes on the same label. The value assigned determines after what time period the scanner will timeout, from 0 to 2550 msec. 6.10.3.3 Code 39 Enable Setting this parameter to on enables “Code 39”. Full ASCII If this parameter is enabled, the characters +, %, and / are used as escape characters. The combination of an escape character and the next character is converted to an equivalent ASCII character. Reading Range Determines the reading distance from which a bar code can be successfully scanned. The default setting, Extended, allows for increased reading distance. 154 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Code 128 Start/Stop Transmit Setting this parameter to on enables the transmission of start and stop characters, which are usually not transmitted. Code 39 can start and end with either a * or a $ character (see also the next parameter). Accepted Start Char This parameter allows the user the option of using one of the two start/stop characters or both ($ char, * char, $ and * char). Check Digit Verification Uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. The available options are: Disabled, MOD 43 Check, French CIP, or Italian CIP. Note: French CIP (French pharmaceutical) is only used with bar codes containing 7 characters. Italian CIP (Italian pharmaceutical) is also known as Code 32. It is transmitted as a standard Code 39 if checksum is not validated. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled. Minimum Length Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.3.4 Code 128 Enable Setting this parameter to on enables “Code 128”. GS1-128 “GS1-128” is the GS1 implementation of the Code 128 barcode specification. The former correct name was UCC/EAN-128. Warrington Hand-Held Computer User Manual 155 Chapter 6: Configuration Code 128 Preliminary Draft GS1-128 Identifier “GS1-128 Identifier” allows the AIM ID " ]C1" for EAN 128 to be transmitted or removed. By default, this identifier is transmitted if EAN 128 is enabled. GTIN Compliant GTIN (global trade item number) processing transmits EAN 128 as the 14-character EAN/UCC GTIN. To use GTIN processing, you must activate the EAN 128 symbology. Important: When EAN 128 and GTIN processing are both activated, it is not possible to read normal EAN 128 Codes. FNC1 Conversion “FNC1 Conversion” allows the FNC1 character to be converted to another character for applications that cannot use the defaultGroup Separator or hex (1d). Double-tapping on this option displays a dialog box listing the allowable range: 0 to 255. Enable ISBT 128 To successfully scan this type of bar code (International Society of Blood Transfusion), this option must be set to on. If you enable this type of bar code, Code 128/EAN 128 is deactivated to avoid any confusion. ISBT Concat Transmit The codes are not concatenated by default. You need to choose one of the options provided for this parameter to send concatenated code. Choosing Only Concatenated Codes transmits only concatenated codes—single codes will not be transmitted. Choosing Concatenated or Single transmits single codes or concatenated codes. If only one code of a pair is read, that code will be transmitted as a single code. If both codes in a pair are detected, they will be concatenated provided that “ISBT Concat Any Pair” (see below) is enabled. ISBT Concat Any Pair Enabling this parameter causes all code pairs that can be, to be concatenated even if they do not comply with Section 4.1 of the “ISBT 128 Bar Code Symbology and Application Specification for Labeling of Whole Blood and Blood Components” (June 2000, Version 1.2.1). Reading Range Determines the reading distance from which a bar code can be successfully scanned. The default setting, Extended, allows for increased reading distance. 156 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration EAN 13 Settings Check Digit Verification The available options for this parameter are Disabled or French CIP. This parameter uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. Note: French CIP (French pharmaceutical) is only used with bar codes containing 7 characters. Minimum Length Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.3.5 EAN 13 Settings Enabled Set this parameter to on to enable “EAN 13”. ISBN Conversion When this parameter (International Standard Book Number) is enabled, the first 3 characters (‘978’) are ignored and the checksum (0.9, ‘X’) is calculated on the remaining characters. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled. Prefix/Suffix Refer to “Prefix/Suffix” on page 143. 6.10.3.6 EAN 8 Enabled Set this parameter to on to enable “EAN 8”. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled. Warrington Hand-Held Computer User Manual 157 Chapter 6: Configuration UPC A Preliminary Draft Convert To EAN 13 If this parameter is enabled, an EAN 8 bar code is converted to EAN 13. Prefix/Suffix Refer to “Prefix/Suffix” on page 143. 6.10.3.7 UPC A Enabled Set this parameter to on to enable “UPC A” bar code scanning recognition. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled. Transmit Number System If this parameter is enabled, the number system digit is transmitted with the decoded bar code data. Convert To EAN 13 If this parameter is enabled, a UPC A bar code is converted to EAN 13. Prefix/Suffix Refer to“Prefix/Suffix” on page 143. 6.10.3.8 UPC E Enabled Set this parameter to on to enable “UPC E”. Enable UPC-E1 Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled. Transmit Number System If this parameter is enabled, the number system digit is transmitted with the decoded bar code data. 158 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration UPC/EAN Shared Settings Convert To UPC-A This parameter converts UPC E (zero suppressed) decoded data to UPC A format before transmission. After conversion, data follows UPC A format and is affected by UPC A programming selections (e.g. Check Digit). Prefix/Suffix Refer to “Prefix/Suffix” on page 143. 6.10.3.9 UPC/EAN Shared Settings The setting assigned to the “Addendum” parameter associated with this option is shared across all UPC and EAN bar codes. Addendum An addendum is a separate bar code, supplementary to the main bar code. This parameter provides two options: Not Required but Transmitted if Read or Required and Transmitted. • Double-tap on Addendum to display a dialog box listing your options. • Highlight an item, and tap on OK. When “Addendum” is set to Not Required but Transmitted if Read, the scanner searches for an addendum and if one exists, appends it to the main bar code. When the parameter is set to Required and Transmitted, the scanner does not accept the main bar code without an addendum. Addendum Add-on 2 And Addendum Add-on 5 Enabling these parameters sets the length of the addendum bar code to either 2 or 5 characters. GTIN Compliant GTIN (global trade item number) processing transmits EAN 128 as the 14-character EAN/UCC GTIN. To use GTIN processing, you must activate the EAN 128 symbology. Important: When EAN 128 and GTIN processing are both activated, it is not possible to read normal EAN 128 Codes. Reading Range This parameter determines the reading distance from which a bar code can be successfully scanned. The default setting, Extended, allows for increased reading distance. Warrington Hand-Held Computer User Manual 159 Chapter 6: Configuration Code 93 Preliminary Draft 6.10.3.10 Code 93 Enabled Set this parameter to on to enable “Code 93”. Minimum Length Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.3.11 Codabar Enabled Set this parameter to on to enable “Codabar”. Start/Stop Transmit Codabar can use the following sets of characters as start and stop characters: a, b, c, d A, B, C, D a, b, c, d, /, t, n, *, e DC1, DC2, DC3, DC4 Thus, when a set is chosen, the first and last digits of a Codabar message must be one of those characters and the body of the message should not contain these characters. Setting this parameter to Not Transmitted strips the start and stop characters from this bar code. CLSI Library System When enabled, spaces are inserted after characters 1, 5, 10 in the 14-character label (used in the USA by libraries using the CLSI system). Check Digit Verification When enabled, this parameter checks the integrity of a symbol to ensure it complies with a specified algorithm—either USS (Uniform Symbology Specification) or OPCC (Optical Product Code Council). Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled. 160 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration MSI Plessey Set Length L1, Set Length L2, And Set Length L3 Lengths for “Codabar” can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays dialog boxes where you can define the code length that will be recognized by your scanner. Length Mode You can choose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.3.12 MSI Plessey Enabled Set this parameter to on to enable “MSI”. Enable Plessy Set this parameter to on to enable “Plessy”. Check Digit Verification The available options for this parameter are MOD 10 Check and Double MOD 10 Check. This parameter uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled. Plessy Transmit Check Digit If the check digit is to be transmitted with the Plessy data, this parameter must be enabled. Minimum Length Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Plessy Minimum Length Minimum lengths for the Plessy bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Warrington Hand-Held Computer User Manual 161 Chapter 6: Configuration Code 11 Preliminary Draft Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.3.13 Code 11 Enabled Set this parameter to on to enable “Code 11”. Check Digit Verification The available options for this parameter are MOD 10 Check and Double MOD 10 Check.This parameter uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled. Minimum Length Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.3.14 Interleaved 2 of 5 Enabled Set this parameter to on to enable “Interleaved 2 of 5”. Reading Range This parameter determines the reading distance from which a bar code can be successfully scanned. The default setting, Extended, allows for increased reading distance. Check Digit Verification The available options for this parameter are Disabled, MOD 10 Check and French CIP. “Check Digit Verification” uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. 162 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Matrix 2 of 5 Note: French CIP (French pharmaceutical) is only used with bar codes containing 7 characters. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled. Set Length L1, Set Length L2, And Set Length L3 Lengths for “Interleaved 2 of 5” can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays dialog boxes where you can define the code length that will be recognized by your scanner. Length Mode You can chose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.3.15 Matrix 2 of 5 Enabled Set this parameter to on to enable “Matrix 2 of 5”. Minimum Length Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.3.16 Discrete 2 of 5 Enabled Set this parameter to on to enable “Discrete 2 of 5”. Standard 2 of 5 Format This parameter allows you to choose a standard format – either Identicon (6 start/stop bars) or Computer Identics (4 start/stop bars). Warrington Hand-Held Computer User Manual 163 Chapter 6: Configuration Telepen Preliminary Draft Check Digit Verification The available options for this parameter are Disabled and MOD 10 Check. “Check Digit Verification” uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled. Set Length L1, Set Length L2, And Set Length L3 Lengths for “Discrete 2 of 5” can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays dialog boxes where you can define the code length that will be recognized by your scanner. Length Mode You can chose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.3.17 Telepen Enabled Set this parameter to on to enable “Telepen”. Format This parameter allows you to set the bar code character format to either ASCII or Numeric. Minimum Length Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 164 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration RSS Code (Reduced Space Symbology) 6.10.3.18RSS Code (Reduced Space Symbology) Enable Setting this parameter to on enables “RSS Code” scanning capability. Enable RSS-14 RSS-14 code can be either purely linear or split in half with one half stacked on top of the other half. Stacking the code reduces the bar code length, and providing the nominal height of the code is maintained, it can be omni-directionally scanned. Enable RSS Limited “RSS-Limited” is restricted, in that it can only encode 14 digit GTINs (global trade item number) that begin with either a 0 or a 1. It is not stackable and is not designed to be read omni-directionally. Enable RSS Expanded “RSS Expanded” uses the same application identifiers as UCC/EAN-128 codes but they can be split into sections and stacked several rows high, reducing the length of the symbol, while increasing the capacity of data that can be stored. “RSS Expanded” code can be omnidirectionally scanned. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.3.19PDF-417 Enabled Set this parameter to on to enable “PDF-417”. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.3.20Micro PDF-417 Enabled Set this parameter to on to enable “Micro PDF-417”. Code 128 Emulation When this parameter is enabled, the scanner transmits data from certain Micro PDF-417 symbols as if it was encoded in Code 128 symbols. Warrington Hand-Held Computer User Manual 165 Chapter 6: Configuration Codablock Preliminary Draft If Code 128 Emulation is enabled, the following Micro PDF-417 symbols are transmitted with one of the following prefixes: ]C1 if the first codeword is 903-907, 912, 914, 915 ]C2 if the first codeword is 908 or 909 ]C0 if the first codeword is 910 or 911 If Code 128 Emulation is set to off, the Micro PDF-417 symbols are transmitted with one of the following prefixes: ]L3 if the first codeword is 903-907, 912, 914, 915 ]L4 if the first codeword is 908 or 909 ]L5 if the first codeword is 910 or 911 Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.3.21Codablock Enable Codablock A Set this parameter to on to enable “Codablock type A”. Enable Codablock F Set this parameter to on to enable “Codablock type F”. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 166 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Imager 6.10.4 Imager • Tap on the Scanner drop-down menu, and choose Imager. 6.10.4.1 Imager – Options TekImager Enabled Setting this option to on enables the imager installed in your hand-held. Continuous Scan Mode Setting this parameter to on keeps image capture active and continuously decoding as long as the scanner button is pressed and held down. Center Bar Code Only Note: This parameter must be disabled when reading Composite bar codes. When more than one bar code is visible in a single snap shot, this parameter allows you to specify that only the centre image within the imager framing marker be read. When this parameter is set to on, the target dot is pointed at the centre image and only that image is returned. Max Number Barcodes This parameter specifies the maximum number of bar codes the imager will attempt to decode in an image. A maximum of 6 bar codes can be decoded at one time. Warrington Hand-Held Computer User Manual 167 Chapter 6: Configuration Imager – Advanced Options Preliminary Draft Barcodes Must Decode This parameter specifies the minimum number of bar codes that the imager must decode in order to report success. Note: This number must be less than the number of bar codes assigned to “Max Number Barcodes”. The driver validates and reassigns the value if necessary. Window Width “Window Width” determines the width of the captured image in pixels. Note: The driver will validate and reassign the value assigned to this parameter, if necessary; the driver will also use the “Window Width” value to horizontally center the image in the field of view. Window Height This parameter determines the height of the captured image in pixels. Note: The driver will validate and reassign the value assigned to this parameter, if necessary; the driver will also use the “Window Height” value to vertically center the image in the field of view. Dot Time (msec) The value selected for “Dot Time (msec)” determines (in milliseconds) how long the targeting dot remains on before the scanner begins capturing images. When you double-tap on this parameter, a dialog box is displayed in which you can enter a value of between 0 and 3000. A value of 0 disables the target dot. 6.10.4.2 Imager – Advanced Options Important: Do not adjust the advanced options without first consulting Psion Teklogix technical support. Factory Defaults On Reboot The value assigned to this parameter determines whether or not the driver will restore the factory defaults to the imager device on the next reboot. Note: The driver will default the imager device on a ‘clean’ reset, regardless of the value of this parameter. 168 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Imager – Advanced Options Min Scan Duration This parameter defines the minimum amount of time in seconds that the imager will scan when the trigger is pressed and held down without successful decode. Note: The actual scan duration when the trigger is pressed relies on the value assigned to “Captures Per HW Trigger”, below. Captures Per HW Trigger The value assigned to this parameter determines the number of captures the imager device will take while the imager's internal hardware trigger is held down. Note: This parameter, together with “Min Scan Duration”, determines the actual scan duration. When the scan trigger is pressed and held down, the driver starts a timer based on the value of “Min Scan Duration” and also sends a command to emulate the hardware trigger. When completed, if the time has not yet expired, it will send another command to the imager device, forcing the imager to flash again using the value assigned to “Captures Per HW Trigger”. Auto Exposure Important: This parameter value should only be changed by qualified Psion Teklogix personnel. It should be left at the default value: on. Setting this parameter to on allows the imager to make automatic gain, integration and illumination adjustments based on ambient light before capturing the bar code. If the adjustment is insufficient, further adjustments are made automatically before another image is captured. Fast Converge Note: “Auto Exposure” must be set to on in order for this parameter to function. Keep in mind that while this parameter can improve imager performance, “Fast Converge” increases battery power consumption. Setting this parameter to on speeds the “Auto Exposure” process. It allows the imager to rapidly snap a number of bar code capture attempts while finding ideal values for gain, integration and illumination. Warrington Hand-Held Computer User Manual 169 Chapter 6: Configuration Imager – Advanced Options Preliminary Draft Max Gain, Max Integration And Max Illumination Important: These parameter values should only be changed by qualified Psion Teklogix personnel. These parameters represent internal values used by the 2D imager. The “Auto Exposure” parameter automatically adjusts the Max Gain, Max Integration and Max Illumination parameters to produce the best bar code read. Keep in mind that “Auto Exposure” must be set to on in order for these parameter values to be automatically adjusted. Double-tapping on any of these parameters displays an associated dialog box in which an allowable range is displayed: Max Gain – 357 to 7920, Max Integration – 0 to 65535, Max Illumination – 0 to 7. Decoder Timeout The decoder is a set of algorithms that examine the image and attempt to find the bar codes, and then turn the pixels into data that the computer can use—this process takes time. “Decoder Timeout” limits the amount of time the decoder will spend attempting to decode an image, and forces it to stop and grab a new image, which will probably be easier to decode. Note: When decoding multiple bar codes in one image, the value assigned to ‘Decoder Timeout’ should be increased to 200ms/extra bar code after the first. Adaptive Windowing “Adaptive Windowing” is an advanced technique used to speed up bar code recognition in certain applications. This parameter automatically reduces the size of the window to the user-programmed window size when it successfully decodes (which reduces decode time the next time it is used), but increases it to the full size window on a failed decode. Note: This feature assumes that you have reached an understanding about how the device operates in your application, and that, after a learning period, operators will get used to using the imager in one particular way. It also assumes that a trained operator will usually only have near miss scenarios. Constant Illumination “Constant Illumination” is used to reduce the intrusiveness of the device’s illumination on the observer. Instead of the illumination turning on and off every time the device attempts a decode (2-4 times per second), the illumination stays on from the time the trigger is pulled until a decode is successful. This feature is useful in low light environments, since it will also reduce the distraction that the illumination can have on nearby co-workers. 170 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Code 39 Settings 6.10.4.3 Code 39 Settings Enabled Set this parameter to on to enable “Code 39”. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.4.4 Code 128 Settings Enabled Set this parameter to on to enable “Code 128”. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.4.5 EAN 13 Enabled Set this parameter to on to enable “EAN 13”. Addendum An addendum is a separate bar code, supplementary to the main bar code. This parameter provides three options: Disabled, Optional and Required. Depending on the value chosen for this parameter, an addendum is recognized or ignored. • Double-tap on Addendum to display a dialog box listing your options. • Highlight an item, and tap on OK. When “Addendum” is set to Disabled, the scanner does not recognize an addendum. If this parameter is set to Optional, the scanner searches for an addendum and if one exists, appends it to the main bar code. When the parameter is set to Required, the scanner does not accept the main bar code without an addendum. Note: Setting “Addendum” to ‘Optional’ reduces performance. It should only be chosen if at least some of the bar codes being read have addendums. Prefix/Suffix Refer to “Prefix/Suffix” on page 143. Warrington Hand-Held Computer User Manual 171 Chapter 6: Configuration EAN 8 Preliminary Draft 6.10.4.6 EAN 8 Enabled Set this parameter to on to enable “EAN 8”. Addendum Refer to “Addendum” on page 171. Prefix/Suffix Refer to “Prefix/Suffix” on page 143. 6.10.4.7 UPC A Enabled Set this parameter to on to enable “UPC A”. Addendum Refer to “Addendum” on page 171. Prefix/Suffix Refer to “Prefix/Suffix” on page 143. 6.10.4.8 UPC E Enabled Set this parameter to on to enable “UPC E”. Addendum Refer to “Addendum” on page 171. Prefix/Suffix Refer to “Prefix/Suffix” on page 143. 6.10.4.9 Code 93 Enabled Set this parameter to on to enable “Code 93”. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 172 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Codabar 6.10.4.10 Codabar Enabled Set this parameter to on to enable “Codabar”. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.4.11 Interleaved 2 of 5 Enabled Set this parameter to on to enable “Interleaved 2 of 5”. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.4.12 RSS Code (Reduced Space Symbology) Enable Setting this parameter to on enables “RSS Code” scanning capability. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.4.13 Composite Important: To successfully read this type of bar code, the two types of symbologies included in a composite bar code must be enabled. Enabled Set this parameter to on to enable “Composite” bar codes. 6.10.4.14 PDF-417 Enable Setting this parameter to on enables PDF-417 two dimensional (2D) coding. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. Warrington Hand-Held Computer User Manual 173 Chapter 6: Configuration Micro PDF-417 Preliminary Draft 6.10.4.15 Micro PDF-417 Enable Setting this parameter to on enables “Micro PDF-417” bar code scanning. Micro PDF-417 is a multi-row symbology that is useful for applications requiring greater area efficiency but lower data capacity than PDF-417. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.4.16 2D Data Matrix Enable Set this parameter to on to enable “Data Matrix”. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.4.17 2D QR Code Enabled Set this parameter to on to enable “2D QR Code”. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.4.18 2D Maxicode Enabled Set this parameter to on to enable “2D Maxicode”. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.4.19 2D Aztec Enabled Set this parameter to on to enable “Aztec”. 174 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Postal: PlaNET Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.4.20 Postal: PlaNET Enabled Set this parameter to on to enable “Postal: PlaNET”. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.4.21 Postal: PostNET Enabled Set this parameter to on to enable “Postal: PostNET”. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.4.22 Postal: Australian Enabled Set this parameter to on to enable “Postal: Australian”. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.4.23 Postal: Japanese Enabled Set this parameter to on to enable “Postal: Japanese”. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.4.24 Postal: Korean Enabled Set this parameter to on to enable “Postal: Korean”. Warrington Hand-Held Computer User Manual 175 Chapter 6: Configuration Postal: Royal Preliminary Draft Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.4.25 Postal: Royal Enabled Set this parameter to on to enable “Postal: Royal”. Field Size/Chars Refer to “Field Size/Chars” on page 142 for details. 6.10.5 Options This tab allows you to tailor the double-click parameters and the display options associated with your scanner. 6.10.5.1 Double Click Parameters Click Time (msec) This parameter controls the maximum gap time (in milliseconds) for a double-click. If the time between the first and second clicks of the scanner trigger is within this time, it is considered a double-click. The allowable range is 0 to 1000. A value of zero disables this feature. A double-click produces different results depending on whether or not a value is assigned in the “Click Data” parameter. When a value is not assigned for the “Click Data”, double-clicking the scanner trigger overrides the target dot delay set in the “Dot Time” parameter and 176 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 6: Configuration Display Parameters initiates a normal scan sweep. If a value is assigned for the “Click Data” parameter, doubleclicking the scanner trigger inserts the “Click Data” value rather than initiating a scan. Click Data For both integrated and external scanners, this parameter determines which character is sent to the application installed in your hand-held following a double-click. A dialog box appears, asking that you press the key you want to insert. The ASCII/Unicode key value of the keypress is displayed. 6.10.5.2 Display Parameters Scan Result When this parameter is enabled, the type of bar code and the result of the scan appear on the screen. Note that this information is only displayed after a successful decode and is visible only while the scanner trigger is pressed. When the trigger is released, this information is cleared from the screen. Scan Indicator When this parameter is enabled, the laser warning logo appears on the display whenever the scanner is activated. Scan Result Time (sec) The value assigned to the “Scan Result Time (sec)” parameter determines how long the scan results of a successful scan are displayed on the screen. Time is measured in seconds, and a value of 0 (zero) disables the parameter. When you choose this option, a dialog box appears where you can enter a value. Note: To remove the scan result from the screen before the “Result Time” has expired, point the scanner away from the bar code and press the trigger. Good Scan Beep And Bad Scan Beep These parameters determine whether or not the hand-held emits an audible scanner ‘beep’ when a good (successful) scan or a bad (unsuccessful) scan is performed. Set these parameters to either on to enable the beeper or off to disable it. Soft Scan Timeout This parameter is used by the SDK “Scan” function (soft-scan: starting a scan session via the SDK function, instead of a physical user trigger press). The value assigned to this parameter determines the soft-scan timeout from 1 to 10 sec (default is 3 sec). Warrington Hand-Held Computer User Manual 177 Chapter 6: Configuration Translations Tab Preliminary Draft Scan Log File If this parameter is enabled, the input barcode and the modified/translated output bar code are logged in the file \Flash Disk\ScanLog.txt. Keep in mind that if the “Scan Log File” is enabled, there is a slight performance effect when performing multiple scans since the log file is written to persistent storage. 6.10.6 Translations Tab The Translations tab allows you to define up to 10 cases, each consisting of up to 10 rules in sequential order. Only one case will be applied to a bar code and a case will only be applied if all rules specified in the case are successful—if a rule within a case fails, the entire case fails. • 178 In the Translation tab, tap on the Case # to create rules. Warrington Hand-Held Computer User Manual Preliminary Draft • Chapter 6: Configuration Case Rules Tap on the No rule drop-down menu to display the rules. When you choose a rule, an associated screen is displayed in which you can define the rule. 6.10.6.1 Case Rules The case rules are defined as follows: • • • • • No rule—ignored. Search and replace—replaces all instances of the match string. (Note that this rule cannot fail.) Match at index—matches the match string at a specified index. Match and replace at index—matches the match string at a specified index and replaces/changes it. Replace at index—replaces/changes unspecified data in a given range. Warrington Hand-Held Computer User Manual 179 Chapter 6: Configuration Case Rules • • Preliminary Draft Add barcode prefix/suffix—adds a global prefix or suffix. Verify barcode size—verifies the bar code size. This rule should generally be assigned first, before creating subsequent rules. Note: Keep in mind that the effects of previously applied rules must be taken into account when creating subsequent rules. For example, if the bar code size is important, it should be checked before any rules that might change the size are applied. Translation information about the status of each case/rule is displayed in the scan log file (see “Scan Log File” on page 178) when enabled. This is useful if a case fails, and you are trying to determine why a rule is failing. 180 Warrington Hand-Held Computer User Manual Preliminary Draft PERIPHERAL DEVICES & ACCESSORIES 7.1 Carrying Accessories . . . . . . . . 7.1.1 Attaching The Hand Strap 7.1.2 Soft Shell Holster. . . . . 7.2 The Battery . . . . . . . . . . . . . .182 .183 .183 .184 7.3 Adaptor Cable Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184 7.4 Chargers And Docking Stations . . . . . . . . . . . . . . . . . . . 7.4.1 Installation – Chargers And Docking Stations . . . . . . . 7.4.2 Power Consumption Considerations . . . . . . . . . . . . 7.4.3 Operator Controls . . . . . . . . . . . . . . . . . . . . . 7.4.4 Important Charger Safety Instructions . . . . . . . . . . . 7.5 Desktop Docking Station . . . . . . . . . . . . . . . . . . . . . . . 7.5.1 Charging A Battery Installed In The Warrington . . . . . 7.5.2 Charging A Spare Battery . . . . . . . . . . . . . . . . . 7.5.3 Battery Charge Duration . . . . . . . . . . . . . . . . . . 7.5.4 Charger LED Indicators . . . . . . . . . . . . . . . . . . 7.5.5 Troubleshooting The Charging Operation Of The Dock. . 7.5.5.1 Excessive Charge Duration . . . . . . . . . . . . 7.5.5.2 Indicator Flashing Red . . . . . . . . . . . . . . 7.5.5.3 Power LED Does Not Light Up. . . . . . . . . . 7.5.5.4 Indicator Does Not Light When Battery Installed 7.5.6 Linking A Warrington To A PC . . . . . . . . . . . . . . 7.5.7 Linking A Warrington To An Ethernet Network. . . . . . 7.5.7.1 Network Access . . . . . . . . . . . . . . . . . . 7.5.8 Troubleshooting The Docking Station Operations . . . . . 7.6 AC Wall Adaptor– Model No. PX3010 . . . . . . . . . . . . . . . .184 .185 .185 .185 .185 .186 .188 .189 .189 .189 .189 .189 .190 .190 .190 .190 .191 .191 .192 .192 7.7 Automotive Power Adaptor—Model #WA3113-G2. . . . . . . . . . . . . . . . . .193 7.8 Quad Docking Station – PX3004. . . . . . . . . . . . . . . . . 7.8.1 Quad Docking Station Setup . . . . . . . . . . . . . . 7.8.2 Quad Indicators. . . . . . . . . . . . . . . . . . . . . 7.8.3 Inserting A Warrington In The Quad Docking Station. Warrington Hand-Held Computer User Manual .194 .194 .194 .195 181 Preliminary Draft 7.8.4 Network Access . . . . . . . . . . . . . . . . . . . . . . 7.8.4.1 Network Addressing . . . . . . . . . . . . . . . 7.8.5 Battery Charging – LED Behaviour. . . . . . . . . . . . 7.8.6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . 7.8.6.1 Network Link Unsuccessful . . . . . . . . . . . 7.8.6.2 Warrington LED Does Not Light When Docked 7.9 The Vehicle Cradle . . . . . . . . . . . . . . . . . . . . . . . . . 7.9.1 Vehicle Cradle Mounting Recommendations . . . . . . . 7.9.1.1 Mounting Template . . . . . . . . . . . . . . . 7.9.2 Wiring Guidelines . . . . . . . . . . . . . . . . . . . . . 7.9.3 Using The Vehicle Cradle . . . . . . . . . . . . . . . . . 7.9.4 Maintaining The Vehicle Cradle . . . . . . . . . . . . . 7.9.5 Powered Cradle Installation In High Voltage Vehicles . . 7.9.6 Powered Vehicle Cradle Installation . . . . . . . . . . . 7.9.6.1 Wiring Vehicle Power To The Cradle . . . . . . 7.9.7 The Port Replicator . . . . . . . . . . . . . . . . . . . . 7.10 Scanners And Imagers . . . . . . . . . . . . . . . . . . . . . . . 7.10.1 Scanning Techniques. . . . . . . . . . . . . . . . . . . 7.10.2 Troubleshooting . . . . . . . . . . . . . . . . . . . . . 7.10.3 Operating One Dimensional (1D) Laser Scanners. . . . 7.11 Bluetooth Peripherals . . . . . . . . . . . . . . . . . . . . . . . 7.1 195 195 195 196 196 196 196 197 197 197 198 198 198 199 199 200 200 200 201 201 202 Carrying Accessories There are a variety of carrying accessories to help the operator work safely and comfortably with the Warrington. Table 7.1 Carrying Accessories Carrying Accessory 182 Model Number Hand Strap PX3024 Wrist Strap (with stitched stylus holder) PX3028 Soft Shell Carrying Holster (compatible with pistol grip) PX3020 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 7: Peripheral Devices & Accessories Attaching The Hand Strap Table 7.1 Carrying Accessories Carrying Accessory Model Number Shoulder Strap PX3022 Belt Clip PX3025 Important: Do not use adhesives such as Loctite to secure screws on carrying accessories. These chemicals may damage the plastic casing. 7.1.1 Attaching The Hand Strap Attaching the hand strap helps protects the Warrington from accidental drops. The hand strap is attached by threading the lanyard through the left- or right-hand eyelet at the base of the unit. is attached by threading the lanyard through the eyelet on the o the back of the Warrington Warrington to provide a secure means for operators to carry the hand-held. The hand strap is attached by fixing the ends of the strap to the anchors located on the back and bottom of the unit (see Figure 7.1). Figure 7.1 Attaching The Hand Strap 7.1.2 Soft Shell Holster A soft shell holster with removable belt and swivel holster pad can be used to hang a Warrington from you waist • Insert the belt in the swivel holster pad. Warrington Hand-Held Computer User Manual 183 Chapter 7: Peripheral Devices & Accessories The Battery • • • 7.2 Preliminary Draft Attach the pad on either the left or right side of the holster case, depending on whether you are left- or right-handed. Fasten the belt comfortably around your waist. Slide the adjustable ring on the belt to tighten the holster in place. Connect the safety tether to one of the clips on the bottom of the soft shell holster. Connect the other end to the hole in the end of the Warrington. This tether will catch the unit in case of a drop. The tether can be adjusted to the operator’s height. The clips will break away in case of a severe force. The Battery The Warrington operates on a 3000 mAh Lithium Ion battery pack – Model WA3006. Note: Review Chapter 8: “Specifications” for detailed information. 7.3 Adaptor Cable Options The following are adaptors that can be ordered for your Warrington: Table 7.2 Cable Model Numbers And Description Model Number ?? 7.4 Adaptor Cable Description ?? WA1002 Tether to USB device. This cable is used to connect USB devices such as USB Flash memory devices. WA4020-G2 Tether to RS-232. This is a full RS-232 port on COM2. WA4001-G2 Tether to USB Client. (For ActiveSync) WA4010-G1 USB to Ethernet adaptor. WA4015 USB/RS-232 adaptor. This cable is used with docking station WA4003-G2. Chargers And Docking Stations Important: Keep in mind when ordering a charger or docking station, you must also order the appropriate power cord separately. Psion Teklogix offers a variety of chargers and docking stations for the Warrington. These include: 184 Warrington Hand-Held Computer User Manual Preliminary Draft • • • • 7.4.1 Chapter 7: Peripheral Devices & Accessories Installation – Chargers And Docking Stations AC Adaptor – Model No. PX3010 Automotive Power Adaptor – Model No. WA3113-G2. ?? Desktop Docking Station – Model No. PX3001 Quad Docking Station – Model No. PX3004 Installation – Chargers And Docking Stations When installing a charger or docking station, consider the following guidelines. • • Keep chargers and docking stations away from excessive dirt, dust and contaminants. Chargers will not charge batteries outside an ambient temperature range of 0 °C to 45 °C (32 °F to 113 °F). It is recommended that the charger or docking station be operated at room temperature—between 18 °C and 25 °C (64 °F to 77 °F) for maximum performance. After unpacking your unit: • • 7.4.2 Visually inspect the charger for possible damage. Install the IEC power cord and apply power. Power Consumption Considerations Check to ensure the mains circuit supplying chargers and/or docking stations is adequate for the load, especially if several chargers and docking stations are being powered from the same circuit. • 7.4.3 Quad docking station–can consume up to 3A @ 120VAC or 1.5A @ 240VAC. Operator Controls Warrington docking stations and chargers have no operator controls or power switches. 7.4.4 Important Charger Safety Instructions • • • • SAVE THESE INSTRUCTIONS–This manual contains important safety and operating instructions for battery chargers. Before using the battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. The mains power cord shall comply with national safety regulations of the country where the equipment is to be sold. Use of an attachment not recommended or sold by the battery charger manufacturer may result in fire, electric shock, or personal injury. Warrington Hand-Held Computer User Manual 185 Chapter 7: Peripheral Devices & Accessories Desktop Docking Station • • • • • • • Preliminary Draft To reduce risk of damage to the electric plug and cord when unplugging the charger, pull the plug rather than the cord. Make sure the cord is positioned so that it is not stepped on, tripped over, or otherwise subjected to damage or stress. Do not operate the charger with a damaged cord or plug. Replace immediately. Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; it should be inspected by qualified service personnel. Do not disassemble the charger; it should be repaired by qualified service personnel. Incorrect reassembly may result in electric shock or fire. To reduce risk of electric shock, unplug the charger from the outlet before attempting any maintenance or cleaning. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in fire or electric shock. If an extension cord must be used, make sure: - The plug pins on the extension cord are the same number, size, and shape as those on the charger. - The extension cord is properly wired and in good electrical condition and that the wire size is larger than 16 AWG. • • • • 7.5 Do not expose the charger to rain or snow. Do not place batteries in the charger if they are cold from extended exposure to a freezer or outside temperatures below 10° C (50° F). Allow them to warm up to room temperature for at least two hours. Do not use the charger if, after an overnight charge, any of the batteries feel warmer than the charger housing. The charger should be inspected by qualified service personnel. Do not use the charger if any of the batteries or the charger get more than lukewarm. The equipment should be inspected by qualified personnel. Desktop Docking Station The Warrington can be inserted in a desktop docking station, model number PX3001. 186 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 7: Peripheral Devices & Accessories Desktop Docking Station Figure 7.2 Desktop Docking Station Note: The desktop docking charger is shipped with its own user manual. It is critical that it be reviewed for additional information and updates. The desktop docking station is designed to charge the battery installed in the Warrington along with a spare battery pack. It is equipped with two USB ports—a Host USB port to connect peripherals such as a printer, keyboard, etc. and a Client USB to connect the docking station to a PC. Warrington Hand-Held Computer User Manual 187 Preliminary Draft Chapter 7: Peripheral Devices & Accessories Charging A Battery Installed In The Warrington Figure 7.3 Back Of Desktop Docking Station Important: This docking station can only be used to charge Psion Teklogix approved Lithium-Ion batteries. 7.5.1 Charging A Battery Installed In The Warrington • • Insert the DC power cable to the DC IN port on the desktop docking station. Plug the pronged end of the cable into an AC outlet. Slide the Warrington into the docking station, making certain that the LIF (Low Insertion Force) port on base of the hand-held is securely seated on the docking station connector pins. An icon is displayed briefly in the navigation bar at the top of the handheld screen indicating that the unit is properly installed in the station: This icon is only displayed when the unit is switched on. The LED on the Warrington lights up indicating that the unit has external power and battery charging will begin. It is safe to leave the unit in the desktop docking station while it is not in use—the battery will not be overcharged. 188 Warrington Hand-Held Computer User Manual Preliminary Draft 7.5.2 Chapter 7: Peripheral Devices & Accessories Charging A Spare Battery Charging A Spare Battery Insert the battery in the spare battery charge well at the back of the docking station, aligning the contacts on the battery with the contacts in the spare battery charge well. 7.5.3 Battery Charge Duration A fully discharged battery can take up to 4?? hours to charge. The desktop docking station stops applying power to the battery when it is fully charged—there is no risk of overcharge if the battery remains in the charge well. 7.5.4 Charger LED Indicators The desktop docking station is equipped with a single tri-coloured LED indicator in the lower-right corner of the front panel that indicates four charge states: Table 7.3 Desktop Docking Station Charger LED Behaviour LED Behaviour Charge Status Off No battery detected in the slot. Solid Green Charge complete. Solid Yellow Battery charged to less than 75% of capacity. Flashing Green Battery charged to greater than 75% of capacity. Solid Red Battery is not charging. The battery temperature is outside of charge range of 0°C to 50°C, or there is a battery fault. Flashing Red Is there a flashing red indicator?? Battery is not charging. Battery fault. Note: Battery charging continues whether the hand-held is switched on or off. 7.5.5 Troubleshooting The Charging Operation Of The Dock 7.5.5.1 Excessive Charge Duration The charger is equipped with a recalibration function—a function that fully discharges and then fully recharges the battery. This process is necessary to recalibrate the battery capacity gauge internal to the battery. The charger attempts recalibration when: • The battery capacity is at less than 30%, and Warrington Hand-Held Computer User Manual 189 Chapter 7: Peripheral Devices & Accessories Indicator Flashing Red Preliminary Draft • The battery has undergone more than 40 partial charge cycles since the last full discharge. The recalibration function extends the charge time by up to 2 hours. 7.5.5.2 Indicator Flashing Red If the indicator flashes red: • Remove the battery and disconnect the mains power cable. • Wait at least 20 seconds, and then plug the cable in again. If the charge well LED continues to flash red, the charger is defective and requires service. If the indicator is flashing red, there is a power supply problem and the charger requires service. 7.5.5.3 Power LED Does Not Light Up • Remove the battery, and unplug the charger. • Connect another device to the mains outlet to ensure there is power. • Remove the IEC mains power cable from the charger, and check it for damage. • Reconnect the mains cable in the charger and mains outlet. If the power LED still does not light up: • Unplug the mains cable, and check the fuse at the rear of the charger. If the fuse appears to be intact, the charger requires service. 7.5.5.4 Indicator Does Not Light When Battery Installed • • • • • 7.5.6 Remove the battery, and clean the contacts on the battery and the charge well. Reinstall the battery, and check that it is fully seated in the charger well. Inspect the charge well contacts for damage (are they bent, flattened, twisted or broken). Try inserting a battery that you know to be working in the charger well. Reconnect the mains power cable, and check that the charger well indicator flashes at powerup. Linking A Warrington To A PC The desktop docking station can be connected to a PC so that you can exchange files in the same way that you would between PC drives. A USB cable is included with your docking station 190 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 7: Peripheral Devices & Accessories Linking A Warrington To An Ethernet Network To link the Warrington to a PC: • • 7.5.7 Insert the hand-held in the desktop docking station. Insert the USB cable into the docking station Client USB connector. Attach the other end of the cable to a USB port on the PC. Linking A Warrington To An Ethernet Network An USB-Ethernet adaptor cable – model number PX??? – is used to connect the Warrington to an Ethernet network through a desktop docking station. Figure 7.4 USB-Ethernet Adaptor Cable • • 7.5.7.1 Insert the adaptor USB connector into the Host USB port on the desktop docking station. Connect your network Ethernet cable to the Ethernet port on the adaptor cable. Power Source The internal battery is the only source of power and the battery can only be charged with charger Model WA3004-G1. Warrington Hand-Held Computer User Manual 191 Preliminary Draft Chapter 7: Peripheral Devices & Accessories Automotive Power Adaptor—Model #WA3113-G2 7.7 Automotive Power Adaptor—Model #WA3113-G2 Important: It is critical that you review the safety instructions outlined in the quick start guide enclosed with your automotive power adaptor before using the accessory. The automotive power adaptor allows you to power your hand-held and recharge your battery using power drawn from your vehicle’s automotive power outlet. Figure 7.5 Automotive Power Adaptor • • • • Unscrew the adaptor end-cap, and remove the fuse inside the adaptor. Replace it with the fuse provided with your kit, and screw the adaptor end-cap back into position. Insert the DC power plug into the DC IN port at the base of the Warrington. Insert the automotive power adaptor plug into automotive power outlet in your vehicle. Note: Battery charging continues whether the hand-held is switched on or off. Warrington Hand-Held Computer User Manual 193 Chapter 7: Peripheral Devices & Accessories Quad Docking Station – PX3004 7.8 Preliminary Draft Quad Docking Station – PX3004 Note: The quad docking station is shipped with a docking manual. It is critical that this manual be reviewed for additional information and updates. The quad docking station permits each of four docked Warrington hand-helds to communicate with a 10/100 BaseT Ethernet network at greater than 2 Mbps. It also provides sufficient power to operate and fast charge the batteries in the units. 7.8.1 Quad Docking Station Setup After unpacking the unit: • Visually inspect the unit for any damage. • Install the IEC power cord and apply power. A green indicator in the lower-right corner of the front panel lights up to indicate that power is present. • Attach a CAT5 RJ45 network patch cable (supplied) between your network and the RJ45 jack on the rear of the dock. A green LED is illuminated next to the RJ45 connector when a valid network link is established. A user application must be loaded onto each Warrington that utilizes the quad dock for communication. When the network is connected and this application is loaded, the quad dock is ready for use. 7.8.2 Quad Indicators The quad dock is equipped with a power indicator LED and RJ45 link and traffic indicator LEDs. When a valid network link is established, a green LED is illuminated next to the RJ45 connector. 194 Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 7: Peripheral Devices & Accessories Inserting A Warrington In The Quad Docking Station 7.8.3 Inserting A Warrington In The Quad Docking Station • Slide the Warrington into the cradle portion of the quad dock until lightly latched. The hand-held detects that it is in a quad dock and momentarily displays the appropriate icon in the navigation bar at the top of the screen: The LED on the hand-held unit lights up to show it has external power and may start charging the battery. Interaction with the Warrington while in the quad dock is a function of the user application software used to communicate with the host network. 7.8.4 Network Access The quad docking station has one 10/100 Ethernet port. You can insert up to four hand-held units. The hand-helds are connected to an internal USB hub. The hand-held unit automatically detects insertion into a quad docking station and loads the appropriate drivers to communicate with the USB/Ethernet converters. 7.8.4.1 Network Addressing Although the USB converters have fixed Ethernet MAC addresses, there is generally no correlation between these addresses and a specific hand-held. The host application uses standard TCP/IP protocol to name, locate and communicate with a specific Warrington on the network. If a link is established between a Warrington and a host, the application on the host and on the hand-held must have a recovery mechanism in the event that the Warrington is removed from the dock and the link is interrupted. 7.8.5 Battery Charging – LED Behaviour The quad docking station supplies DC power to enable the Warrington internal fast charger. Charge status is displayed on the hand-held LED–the LED turns red while the battery is being charged and turns green once the charge is complete. If the battery is fully charged when the unit is inserted in the docking station, the LED flashes red for less than a second and then turns green. Battery charging continues whether the Warrington is switched on or off. It can take up to 4 hours to fully charge the internal battery. Warrington Hand-Held Computer User Manual 195 Chapter 7: Peripheral Devices & Accessories Troubleshooting 7.8.6 Preliminary Draft Troubleshooting The indicators, applications and drivers required to use and monitor the docking station are installed on the Warrington—no indicators or applications are present on the docking station itself. 7.8.6.1 Network Link Unsuccessful If a network link fails, the Warrington application alerts the operator that the link was unsuccessful. 7.8.6.2 Warrington LED Does Not Light When Docked • • • • • • • 7.9 Check that the quad docking station has power: Is the Power LED on the docking station illuminated? Try inserting the Warrington in another well in the quad dock. Check for dirt or contamination on the docking contacts at the bottom of the Warrington. Wipe the contacts with a damp cloth if necessary. Check the pogo pins inside the dock cradle for dirt. Gently wipe with a damp cloth if they appear to be dirty or discoloured. Check that the pogo pins are not bent or damaged. Remove and reinsert the Warrington in the cradle, and check that the latch is holding the unit in place (the pogo pins must be compressed for proper contact). Make certain that the battery installed in the Warrington is not defective. The Vehicle Cradle The vehicle cradle is a highly ruggedized, single station dock. Although it provides quick insertion and removal, the cradle holds the Warrington securely even when operated in high vibration environments. Note: Shock and vibration specifications for the Warrington are verified using Psion Teklogix-approved RAM mounts and mounting hardware. Use of non-certified Psion Teklogix mounting hardware is not recommended, and may void warranty coverage. The vehicle cradle is Model # WA1310-G2???. A port replicator option is available for powered vehicle cradles. Refer to “The Port Replicator” on page 200 for details. 196 Warrington Hand-Held Computer User Manual Preliminary Draft 7.9.1 Chapter 7: Peripheral Devices & Accessories Vehicle Cradle Mounting Recommendations Vehicle Cradle Mounting Recommendations Before mounting a vehicle cradle in a vehicle, there are a number of operator safety issues that require careful attention. An improperly mounted cradle may result in one or more of the following: operator injury, operator visibility obstruction, operator distraction and/or poor ease of egress for the operator. Psion Teklogix strongly recommends that you seek professional mounting advice from the vehicle manufacturer. Cable routing within a vehicle cab also requires careful consideration, especially for separately tethered scanners and other devices with loose cables. If you are unable to obtain suitable advice, contact Psion Teklogix for assistance. Note also that for better protection, the equipment should be mounted inside the vehicle roll cage. Pedestal mounts are recommended for all fixed mount locations because they offer optimal operator access. In addition, for safety reasons, only pedestal mounts with fully locking joints should be used in vehicles. Always adjust the pedestal for the optimum viewing angle, and securely tighten the hex and wing screws. The most effective way to mount the vehicle cradle is to use the four #8-32 threaded inserts on the rear of the unit. Bolts must not extend more than 10mm (3/8") into the cradle. To accommodate the service loop of the connector cable, leave a 4" clearance at the bottom of the cradle. Leave a 7" (minimum) clearance at the top of the cradle to allow easy removal of the hand-held. Also remember to leave at least a 3" clearance at the sides of the cradle to allow activation of the release knobs. Refer to the detailed assembly instructions that are packaged with the cradle when selecting a mounting location. 7.9.1.1 Mounting Template The vehicle cradle is shipped with detailed mounting instructions including a drill template. 7.9.2 Wiring Guidelines Before installing cables between the cradle and other devices, review the following: • • • • • • Ensure that drilling holes will not damage the vehicle or its wiring. Protect cable runs from pinching, overheating and physical damage. Use grommets to protect cables that pass through metal. Use plastic straps and tie-downs to secure cables and connectors in their desired location, away from areas where they may get snagged or pulled. Keep cables away from heat sources, grease, battery acid and other potential hazards. Keep cables away from control pedals and other moving parts that may damage the cables or interfere with the operation of the vehicle. Warrington Hand-Held Computer User Manual 197 Chapter 7: Peripheral Devices & Accessories Using The Vehicle Cradle 7.9.3 Preliminary Draft Using The Vehicle Cradle If your Warrington is equipped with a shoulder strap or cover, these accessories need to be removed before installing the unit in a vehicle cradle. There is no need to remove hand straps or tethered devices from the unit. • • 7.9.4 Slide the Warrington into the cradle, and press firmly downward until it locks into place. On a vehicle, it’s a good idea to pull up on the Warrington to be certain that it is secure. To remove the unit, press firmly on the RELEASE button on the front face of the unit until it releases from it latch. The hand-held will be slightly raised so that it can be removed. Maintaining The Vehicle Cradle Two latches in the cradle hold the Warrington firmly in place. Although these latches are designed for robustness and endurance, they will wear over time and will no longer lock the hand-held securely in the cradle. For replacement parts and instructions contact Psion Teklogix. Partial disassembly is required. 7.9.5 Powered Cradle Installation In High Voltage Vehicles Voltages exceeding 60VDC are considered hazardous. For powered cradle installations on vehicles with batteries above this voltage, ensure the powered cradle power connector is mounted in a dry location on the vehicle, or that the connector is insulated with an appropriate waterproof material after installation. The connector must also be installed out of the vehicle operator’s reach. Exposing an accessible power connector to water or other liquids could create a hazardous situation resulting in serious injury or death. Installation of powered cradles in vehicles that operate above 60VDC require special consideration. Due to the hazardous voltages present on these vehicles, it is necessary to ensure that the powered cradle power supply cable connector is not accessible to the vehicle operator, and does not get exposed to water or other liquids. This can be accomplished in one of the following ways: • • • 198 Ensure the power connector is installed in a dry location on the vehicle, away from the vehicle operator’s reach (perhaps under a vehicle dash or in a sealed housing). Cover the power connector with a waterproof heat shrink material. Wrap the connector securely with a waterproof electrical tape in an area out of the vehicle operators reach. Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 7: Peripheral Devices & Accessories Powered Vehicle Cradle Installation All other installation requirements outlined in this document should also be followed for High Voltage vehicles to insure safe installation and operation of the powered cradle. 7.9.6 Powered Vehicle Cradle Installation The powered cradle is designed to allow the Warrington to be powered by a vehicle battery. The battery installed in the hand-held is also recharged by the vehicle battery. This option accepts DC power sources ranging from 9 to 20V, with optional pre-regulator. The vehicle cradle can be ordered with the powered cradle option installed. Applying a voltage greater than that specified or reversing or reversing polarity may result in permanent damage to the cradle power option and will void the product warranty. 7.9.6.1 Wiring Vehicle Power To The Cradle A 1.8 meter (6 foot) extension power cable (PN 13985) is supplied with your powered vehicle cradle. This cable should be wired to a filtered, fused (maximum 10A) accessory supply on the vehicle. The power cradle draws no more than 8A (less if the accessory supply is greater than 12V). Any additional wiring, connectors or disconnects used should be rated for at least 10A. The red lead of the power cable attaches to the positive vehicle supply. The black lead connects to the negative supply–this should be connected to a proper terminal block and not to the vehicle body. The power cradle is fully isolated and can be used with both negative and positive chassis vehicles. You may have the option of connecting power before or after the ‘key’ switch. It is preferable to wire the power cradle after the key switch–that is, it cannot be turned on without the key on. However, if the operator switches the key off repeatedly for long periods during a shift, it may make more sense to wire the cradle before the switch. Keep in mind that the Warrington will continue to operate with or without vehicle power as long as its battery has sufficient charge. If an unfused power source must be used, a fuse assembly (PN 19440) must be added to the extension power cable (the fuse and instructions are supplied with the cable). Use only a 10A slow blow UL approved fuse in the fuse assembly. Warrington Hand-Held Computer User Manual 199 Chapter 7: Peripheral Devices & Accessories The Port Replicator 7.9.7 Preliminary Draft The Port Replicator The port replicator (Model# WA4005-G1) is an optional accessory that allows tethered devices as well as mounted peripherals (e.g., bar code printers or weigh scales) to be attached to the vehicle cradle. The replicator can be used with or without the cradle power option. The functionality of the Warrington tether port is replicated into RS-232 serial interfaces by the port replicator. It provides the user with 3 DB9 serial interfaces as well as one Type B USB port (for connecting a Host device). 7.10 Scanners And Imagers The Warrington supports a 1D laser scanner (SE955) and a 1D imager (EV15) options to address a variety of user application requirements. The scanner/imager installed in your unit can be configured using the Scanner Settings dialog box in the Control Panel (see page 134) and the Manage Triggers application (see page 105). It is critical that you review the safety information in the Chapter 1: “Approvals & Safety Summary” before proceeding. 7.10.1 Scanning Techniques • • • • • 200 Hold the scanner at an angle. Do not hold it perpendicular to the bar code. Do not hold the scanner directly over the bar code. In this position, light can reflect back into the scanner’s exit window and prevent a successful decode. Scan the entire bar code. If you are using a 1D laser scanner, make certain that the scan beam crosses every bar and space on the bar code, including the margins on either end of the symbol. When using imaging scanners, do not move the scanner while decoding the bar code. Movement blurs the image. Hold the scanner farther away for larger bar codes. Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 7: Peripheral Devices & Accessories Troubleshooting • Hold the scanner closer for bar codes with bars that are close together. A bar code icon appears on the screen during a scan. While the scanner beam is active, the onscreen message states: SCANNING. If you want to turn off the onscreen message, disable Scan Indication in the Options tab of the Scanner Settings menu in the Control Panel. When the scan is successful, the bar code data is displayed on the screen until the scan button (or pistol trigger) is released, but only if Scan Result is turned on in the Options tab of the Scanner Settings menu in the Control Panel. 7.10.2 Troubleshooting If the scanner is not working, investigate the following: • • • • • • • Is the unit on? Check that the bar code symbology being scanned is enabled for the hand-held you are using. Check any other parameters that affect the scanning procedure or the bar code. Check the bar code to make sure it is not damaged. Try scanning a different bar code to verify that the problem is not with the bar code. Check that the bar code is within the proper range. Does the hand-held display the warning without scanning? This suggests a hardware problem in the hand-held. Is the laser beam scanning across the bar code? Once the scan beam has stopped, check the scanner window for dirt or fogging. 7.10.3 Operating One Dimensional (1D) Laser Scanners • Turn the hand-held on. Wait until the unit has booted up completely. Important: If an aiming dot is available on the installed scanner, the dot will be enabled for a configurable time period (including off), after which normal scanning begins. Refer to “Dot Time (msec)” on page 137 for details. Double-clicking the trigger will override the aiming delay and initiate an immediate scan. Note that the aiming dot is standard on long-range and high visibility internal scanners. • Aim at the bar code and press the scan key or the trigger. A scan beam and a warning indicator appear until a successful decode is achieved or six seconds have elapsed. Warrington Hand-Held Computer User Manual 201 Chapter 7: Peripheral Devices & Accessories Bluetooth Peripherals 7.11 Preliminary Draft Bluetooth Peripherals The Warrington is equipped with a Bluetooth radio, making it is possible to communicate with a variety of Bluetooth peripherals, including GSM/GPRS handsets, scanners, printers, and so on. The range of the Bluetooth radio is limited to approximately 10 meters. Psion Teklogix provides built-in support for the Bluetooth peripherals listed below. • GSM/GPRS universal handset. • Bluetooth printer. • Bluetooth headset. Keep in mind that Bluetooth and IEEE 802.11b/g radios both operate in the 2.4GHz band. Although the Warrington includes features to minimize interference, performance of the system will not be optimal if you use both radios simultaneously. Typically, when both radios operate in the hand-held at the same time, they cannot transmit simultaneously—this has a negative impact on overall system throughput. To minimize the impact on the backbone 802.11g network, Psion Teklogix recommends using Bluetooth peripherals that have low transaction rates (such as printers and scanners). Refer to “Bluetooth Setup” on page 110 for information about setting up your Bluetooth devices for communication. In addition, review the manual shipped with your Bluetooth device to determine the method used to pair with the Warrington host. 202 Warrington Hand-Held Computer User Manual Preliminary Draft SPECIFICATIONS 8.1 Warrington Hand-Held Specifications . . . . . 8.1.1 Hardware . . . . . . . . . . . . . . . 8.1.2 Software . . . . . . . . . . . . . . . 8.1.3 Wireless Communication. . . . . . . 8.1.4 Bar Code Applications . . . . . . . . 8.1.5 Accessories . . . . . . . . . . . . . . 8.1.6 Approvals. . . . . . . . . . . . . . . 8.2 Warrington Radio Specifications . . . . . . . . 8.2.1 802.11b/g Radio . . . . . . . . . . . 8.2.2 Bluetooth Radio . . . . . . . . . . . 8.3 Scanner/Imager Specifications . . . . . . . . . 8.3.1 SE 955HP Specifications. . . . . . . 8.3.1.1 SE 955HP Decode Zone . . 8.3.2 EV15 Imager Specifications . . . . . 8.3.2.1 EV15 Imager Decode Zone . Warrington Hand-Held Computer User Manual .205 .205 .207 .208 .208 .208 .209 .209 .209 .210 .210 .210 . 211 . 211 .212 203 Preliminary Draft Preliminary Draft 8.1 Chapter 8: Specifications Warrington Hand-Held Specifications Warrington Hand-Held Specifications Note: Performance specifications are nominal & subject to change without notice. 8.1.1 Hardware Connected Warrington Standard Features: • • • • • • • 2.7 inch colour touchscreen CE .Net Pro 64/128 MB Memory microSD slot 3000 mAh Battery VoIP (Push-To-Talk) WiFi/Bluetooth Radio Additional Options: • • • 1D Imager 1D Laser Scanner Keyboard Variants: 48-Key Alpha-Numeric or 26-Key Numeric Batch Warrington Standard Features: • • • • • • 2.7 inch Colour Touchscreen Numeric Keypad CE .Net Core 64/128 MB Memory microSD Slot 3000 mAh Battery Additional Options: • • • Bluetooth Radio Bluetooth Radio and 1D Imager Bluetooth Radio and 1D Laser Scanner Physical Dimensions • 168 mm x 64 mm x 34 mm (6.61 in. x 2.52 in. x 1.34 in.) Warrington Hand-Held Computer User Manual 205 Chapter 8: Specifications Hardware Preliminary Draft Weight (with battery pack) • 270 g (9.52 oz.) User Interface Color Touchscreen Display: 6.86 cm (2.7 in.) diagonal 1/4 VGA portrait mode Sunlight readable transmissive with touch screen Colour 240 x 320 graphic TFT Passive stylus or finger operation Multicolour LED for scanning Keyboard: 48-key Alpha Numeric (available for Connected hand-helds with 802.11 radio installed) 26-key Numeric (available for Connected and Unconnected (no 802.11 radio installed) units Indicators & Controls: tri-coloured LEDs indicates battery charge and application status Audio: Built-in microphone and receiver on all Connected hand-helds 85db internal beeper Internal Expansion Slots • One microSD memory card slot – user accessible. External Ports • • RS232 Serial. USB host. Power Management • • • • 206 Battery Pack: Lithium Ion 3000 mAh capacity with 8-hour life under normal operating conditions. 8 hour battery operation. Smart battery system level 3 compliant. Built in gas gauge & performance monitor. Warrington Hand-Held Computer User Manual Preliminary Draft • • • Chapter 8: Specifications Software System backup (up to 10 minutes) during battery swap. 3 Day real time clock backup. Adjustable battery allocation between system backup and runtime. Environmental Specifications 8.1.2 Drop Test: 1.2 m (4 ft.) - 26 drops to polished concrete. Rain/Dust: IP54, IEC 529. Operating Temperature: -10 °C to +50 °C (14 °F to 122 °F). Relative Humidity: 5% to 95% RH non-condensing. Storage Temperature: -20 °C to +60 °C (13 °F to 140 °F). Shock and Vibration: 5-400Hz PSD (random) and 30g (3 axis). ESD: +/- 15kVdc air discharge, +/- 8kVdc contacts. Software Platform • • PXA270 Processor @ 312Mhz Memory: - On-board RAM: 128 MB SDRAM - On-board ROM: 64 MB Flash Operating System • Microsoft® Windows® CE 5.0 Programming Environment • • HTML, XML. Mobile Devices SDK: - CE .NET SDK - Java Visual C++ - Standard protocols APIs – Windows® sockets (WinCE) Application Software • • Internet Explorer 6.0 incl.with Windows CE 5.0 WordPad Warrington Hand-Held Computer User Manual 207 Chapter 8: Specifications Wireless Communication • • • • • • • • 8.1.3 ActiveSync Open Tekterm ANSI TESS terminal emulations IBM 3270, IBM 5250, HP 2392 Wavelink® MCL MCC Wireless Communication • • 8.1.4 Preliminary Draft On-board IEEE 802.11b/g (CCX Certified) On-board Bluetooth radio (10 meter range) Bar Code Applications Note: All are user-upgradeable. • • 8.1.5 Optional 1D EV15 imager expansion module. Optional 1D SE955 laser scanner expansion module. Accessories Power • • • • AC power supply (Universal) (charge and operate hand-held). Automotive power supply (charge and operate hand-held). Powered cradle for vehicle-mount applications. Non-powered cradle for vehicle-mount applications. Communications • • • 208 Quad Dock (4-site) with 10/100 BaseT Ethernet and charge functions. Desktop Docking Station (charges hand-held & spare battery) provides USB1.1 host and device ports and supports optional plug-on expansion modules supporting 10/100 BaseT Ethernet or RS-232 connections. USB cable supports Active Sync without requiring a docking station. Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 8: Specifications Approvals Carrying Accessories • 8.1.6 Hand strap, holster, and various protective carrying cases and pouches. Approvals Safety: IEC 60950-1 EMC: FCC Part 15 Class B EN 55022 EN 55024 EN 301 489 Laser: IEC 60825-1, Class 2 FDA 21 CFR 1040.10 1040.11 Class II Bluetooth: 2.0 RF: Bluetooth and 802.11b/g: EN300 328, Part 15.247 8.2 Warrington Radio Specifications 8.2.1 802.11b/g Radio Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM) Form factor Embedded surface mount module, 8.2 x 8.4 mm Antenna port U.FL jack Transmit Power 802.11b/g: 50 mW typical (+17 dBm) Frequency Range 2.400 - 2.4835 GHz Channels This radio supports 802.11d. The radio will associate with any 802.11d compliant AP, regardless of what channel is in use. RX Sensitivity -86 dBm typ @ 11 Mbps -82dBm @ 6 Mbps, -69 dBm @ 54 Mbps Data Rates 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps Warrington Hand-Held Computer User Manual 209 Chapter 8: Specifications Bluetooth Radio Preliminary Draft 802.11b: 1, 2, 5.5, 11 Mbps EVM 802.11b: -28 dB typ (16%) 802.11g: -29 dB typ (13%) Bluetooth Co-existent 8.2.2 2-line hardware handshake with Bluetooth radio Bluetooth Radio Form Factor Embedded (920 kbps serial interface) Bluetooth Version Ver 2 compliant – features Adaptive Frequency Hopping (AFH) for better co-existence with 802.11 radio and Enhanced Data Rate EDR for up to 3 Mbps data rate) Antenna Type Ceramic chip PIFA Antenna Gain 1 dBi peak Transmit Power -3 dBm (0.5mW) minimum, +4 dBm (2.5 mW) max Frequency Range 2.400–2.4835 GHz RX Sensitivity (BER<0.1%) -80 dBm max Data Rate V1.2 = 732.2 kbps and 57.6 kbps asymmetric, 433.9 kbps symmetric V2.0 = 2 & 3Mbps 802.11 Co-existent 2-line hardware handshake with 802.11 radio 8.3 Scanner/Imager Specifications 8.3.1 SE 955HP Specifications 210 Scan Angle 47° ± 3° default / 35° ± 3° reduced Scan Rate 104 (± 12) scans/sec (bi-directional) Scan Pattern Linear Wavelength 650nm Input Voltage 3.0-5.5 VDC ± 10% Warrington Hand-Held Computer User Manual Preliminary Draft Chapter 8: Specifications SE 955HP Decode Zone Input Current 65 mA typical Standby Current 8 µA max Operating Temperature -20° to 60° C -4° to 140°F Print Contrast Minimum 25% absolute dark/light reflectance measured at 650 nm Dimensions 1.21 cm H x 2.16 cm W x 1.55 cm (max) 0.47 in. H x 0.85 in. W x 0.61 in. D (max) Symbologies UPC/EAN, Code 128, Code 39, Code 93, I 2 of 5, Discrete 2 of 5, Codabar, MSI Plessey 8.3.1.1 SE 955HP Decode Zone Decode Zone Typical 4 mil 1.0 in. – 5.5 in. / 2.54 cm – 13.97 cm 5 mil 1.25 in. – 8 in. / 3.18 cm – 20.32 cm 7.5 mil 1.5 in. – 13.25 in. / 3.81 cm – 33.66 cm 10 mil 1.5 in. – 17.5 in. / 3.81 cm – 44.45 cm UPC 100% 1.5 in. – 23.5 in. / 3.81 cm – 59.69 cm 15 mil 1.5 in. – 29.5 in. / 3.81 cm – 74.93 cm 20 mil 1.75 in. – 35.5 in. / 4.45 cm – 90.17 cm 40 mil * - 40 in. / * - 101.6 cm 55 mil * - 55 in. / * - 139.7 cm * dependent on width of bar code 8.3.2 EV15 Imager Specifications Parameter Light Source Scan Angle Minimum Print Contrast Min x. Dimension Specification 617nm Highly Visible LED 40º Minimum 25% 0.1 mm (4 mils) Warrington Hand-Held Computer User Manual 211 Chapter 8: Specifications EV15 Imager Decode Zone Preliminary Draft Parameter Reading Distance Symbologies Ambient Light Shock Vibration Specification Up to 90cm (35 in) UPC (E&A), EAN, RSS, Code 39, Code 128, UCC/EAN 128, ISBN, ISBT, Interleaved, Matrix, Industrial and Standard 2 of 5, Codabar, Code 93/93i, Code 11, MSI, Plessey, Telepen, PDF417, Micro PDF417 Works in any lighting conditions, from 0 to 100,000 lux 2000G, 0.7ms, half sinus, 3 axes 50G r.m.s 8.3.2.1 EV15 Imager Decode Zone 0 Lux to 100,000 Lux Mil Size Minimum Range Maximum Range Inches Inches 2.5 10 14 UPC 14.5 20 2.5 22 40 35.5 High quality symbols in normal room light. 212 Warrington Hand-Held Computer User Manual Preliminary Draft APPENDIX PORT PINOUTS A.1 Tether Port Pinout PIN # Signal Name Ground USB Data Plus (can be configured as Host or Device) USB Data Minus (can be configured as Host or Device) USB VBUS (can provide 5V, 100mA Max for powering USB Devices) RS-232 Tx data RS-232 Rx Data Tether detect resistor ID. Determines what kind of device is attached to the Tether port DC Power In DC Power In 10 DC Power In 11 RS-232 CTS 12 RS-232 RTS 13 RS-232 DSR 14 RS-232 DTR 15 RS-232 DCD 16 RS-232 RI 17 Ground 18 Ground 19 Ground 20 Ground Warrington Hand-Held Computer User Manual A-1 Appendix A: Port Pinouts Battery 3000 mAh – WA3006: Contact Pinout A.2 Preliminary Draft Battery 3000 mAh – WA3006: Contact Pinout PIN # Signal Name POS A-2 DESCRIPTION Positive lead of battery Plastic Rip POS Positive lead of battery CLK SMBus data clock TEMP Thermister 10K NTC DATA SMBus bi-directional data line NEG Negative lead of battery NEG Negative lead of battery Warrington Hand-Held Computer User Manual Preliminary Draft INDEX Accepted Start Char 155 accessories desktop docking station 186 Ethernet adaptor cable 191 hand strap 182 holster, soft shell 183 port replicator 200 quad docking station 194 vehicle cradle 196 Active Conn Tab 116 ActiveSync ASync profile 112 Adaptive Windowing 170 adaptor cable USB-Ethernet 191 Addendum 159, 171, 172 Addendum Add-on 2 159 Addendum Add-on 5 159 Aim Duration 137 aiming dot, duration of 137 ALT Key 62 appearance (display colour scheme) 86 appending to bar codes characters 144, 177 arrow keys moving the cursor 62 ASCII Full Ascii 154 audio indicators beep conditions 67 volume adjustment 67 Authentication, Bluetooth Controls 113 Auto Exposure (Imager) 169 Aztec, 2D 174 backlight display 84 intensity 65 keyboard 64 backup battery 21 backup profile, creating (Total Recall) 124 backup profile, restoring (Total Recall) 128 Bad Scan Beep 177 bar code appending to 144, 177 displaying type of bar code 177 parameters 134 prefix character 142, 143 stripping characters 142, 144 suffix character 142, 144 symbologies Codabar 147, 160, 173 Code 11 162 Code 128 143, 171 Code 39 171 Code 93 147, 172 Discrete 2 of 5 150, 163 EAN 13 143, 157, 171 EAN 8 144, 157, 172 Interleaved 2 of 5 149, 162, 173 Matrix 2 of 5 163 MSI Plessey 148, 161 UPC A 144, 158, 172 UPC E 145, 158, 172 Translation tab 178 bar code reader integrated scanner, operation of 200 Barcodes Must Decode 168 batteries a description of 184 backup 21 charging 21 pinouts A-2 battery capacity dialog box 100 charging 59 gauge 69 installing 22, 58 power saving suspend dialog box 101 Warrington Hand-Held Computer User Manual Preliminary Draft Index removing 58 run time 70 storing 70 swap time 59 battery charger safety instructions 185–186 beeper beep conditions 67 volume adjustment 67 Bi-Direction Redundancy 138 BKSP (DEL Key) 62 Bluetooth devices, pairing 72, 111 Bluetooth radio changing device name 116 device service profiles 112 ISM band 110 PINs for devices 113 radio configuration 110 Bluetooth setup 110 GPRS setup 118 peripherals 202 Bluetooth specs 210 Bright For (backlight) 85 BSP, Bluetooth Controls 117 cable diagrams A-1 calibrating (touchscreen) 65, 104 Captures Per HW Trigger 169 Center Bar Code Only (Imager) 167 CH, Bluetooth Controls 113 changing password (Start Menu security) 46 characters appending to bar codes 144 prefix 142, 143 stripping 142, 144 suffix 142, 144 charger descriptions of 59 safety instructions 185–186 chargers 184 desktop docking station 186 installing at a site 185 operator controls 185 charging (main battery) 21 Check Digit Algorithm (MSI Plessey) 149 Check Digits (MSI Plessey) 148 II Warrington Hand-Held Computer User Manual Check Digit Verification 141, 155, 157, 161, 162, 164 Check Digit Verification (Codabar) 160 Check Digit Verification (I 2 of 5) 149 cleaning hand-held 73 Click Data (scanner double-click) 177 Click Time (scanner double-click) 176 CLSI Editing 148 CLSI Library System 160 Codabar 160, 173 Codabar 147 Codablock 166 Code 11 162 Code 128 171 Code 128 143, 155 Code 128 Emulation 152, 165 Code 32, Convert To 140 Code 32 Prefix 140 Code 39 140, 154 Code 93 147, 172 Code 93 147 Cold Reset (Shutdown menu) 52 COM, Bluetooth Controls 117 Command Prompt 46 communication Ethernet connection (desktop dock) 191 Ethernet connection (quad dock) 194 Warrington to PC 190 Composite 151, 173 configuring IEEE 802.11 radio 23 connection list table, Bluetooth Controls 116 Constant Illumination 170 Continuous Scan Mode 137, 153, 167 control panel accessing 79 basic setup 83 Display Properties 83 icons 80 keyboard properties 86 power management properties 100 stylus properties 104 Conv. UPC-E To UPC-A 145 Conv. UPC-E1 To UPC-A 146 Convert To Code 32 140 Convert To EAN 13 150, 158 Convert To UPC -A 159 cradle See also Picker cradle 196 Preliminary Draft CTRL Key 62 cycle tasks 49 DUN service, Bluetooth 112 EAN 13 143, 157, 171 EAN 8 144, 157, 172 EAN-8 Zero Extend 144 ECI Decoder 140 Enable Bookland (UPC-EAN) 146 Enable CC-AB 151 Enable CC-C 151 Enable Plessy 161 Enable RSS Expanded 151, 165 Enable RSS Limited 151, 165 Enable RSS-14 150, 165 Enable TLC-39 151 Encryption, Bluetooth Controls 113 ESC Key 62 EV15 1D imager scanner specifications 211 Index Data Matrix, 2D 174 data transfer, PC to Warrington 32 decoded (internal) scanner parameters 136 decoded (ISCP) parameters 153 Decode Performance 142, 143 Decode Performance Level 142, 143 Decoder Timeout 170 DEL (BKSP) Key 62 Delete Char Set ECIs 140 Demo Imager 47 Scanner 47 Signature 47 desktop connection, remote 79 desktop docking station (WA4002) 186 Device Name, changing 116 dialer (phone), using 33 dialing, phone number 33 dialog box, using 52 Diff Read Timeout 154 Dim For (backlight) 85 Discrete 2 of 5 150, 163 Discrete 2 of 5 150 dismounting partitions 131 display appearance (colour scheme) 86 backlight 84 backlight, adjusting 65 Display Properties 83 Display Properties 83 docking device icons 69 docking station uploading data using 71 docking stations 184 desktop docking station 186 installation at site 185 operator controls 185 quad dock 194 Dot Time 137, 168 double-click appending characters to a decoded bar code 177 scanner trigger 176 Double-Click, Manage Triggers menu 106 Double-Tap (stylus settings) 104 Factory Defaults On Reboot 168 Fast Converge (Imager) 169 Field Size 142 Field Size/Chars (bar code scanning) 142 FNC1 Conversion 156 formatting entire memory card 128 partitions 131 Full Ascii 154 Full ASCII (decoded scanner) 141 Function Keys accessing 62 Good Scan Beep 177 GPRS (Bluetooth) 118 GS1-128 155 GS1-128 GS1 US 143 GS1-128 Identifier 156 GTIN Compliant 156, 159 hand strap 182 headsets, pairing (Bluetooth) 72, 111 holster, soft shell 183 Warrington Hand-Held Computer User Manual III Preliminary Draft Index IEEE radio, configuring 23 Imager EV15 specifications 211 imager options 200 imager parameters 167 indicators battery gauge 69 docking devices 69 LED functions 66 modifier keys 68 onscreen 67 scanner message 201 security level 70 taskbar 41 802.11radio signal quality 69 Input Panel (control panel) 81 integrated scanner option 200 Intensity, Keyboard Backlight 89 Intensity (backlight) 85 Interleaved 2 of 5 149, 162, 173 Internet Explorer 46 ISBN Conversion 157 ISBT Concat Any Pair 156 ISBT Concat Transmit 156 ISBT 128 143, 156 ISM band, Bluetooth radio 110 keyboard key repeat 86, 89 one shot mode 90 36-key keyboard 63 keyboard backlight 64 keyboard keys 60 ALT 62 arrow keys 62 BKSP 62 CTRL 62 DEL 62 ESC 62 Macro keys 63 macro keys 91 modifiers 61 navigating using the keyboard 37 one shot mode 90 SCAN 62 SHIFT 61 SPACE 62 IV Warrington Hand-Held Computer User Manual TAB 62 Keyboard Properties 86, 89 backlight 89 one shot mode 90 Key Repeat tab 87 keys alpha keys, 36-key keyboard 63 LANAccessUsingPPP service, Bluetooth 112 Laser On Time 137, 153 LED functions 66 Length Mode 161, 163, 164 Linear Decode 146 Linear Security Level 138 Low Power Timeout 137, 154 L1, Set Length 141 L2, Set Length 141 Macro keys 63 executing a macro 92 Macros menu, accessing 91 recording and saving 91 maintenance (of hand-held) 73 Manage Triggers 105 Matrix 2 of 5 163 Max Gain (Imager) 170 Max Illumination (Imager) 170 Max Integration (Imager) 170 Max Number Barcodes 167 memory card creating partitions 129 formatting entire 128 formatting partition 131 messages Scan Indicator 177 scanner warning message 177 Scan Result 177 Micro PDF-417 152, 165, 174 Micro-SD Card, inserting 72 Microsoft® ActiveSync® 32 Microsoft® Vista® 32 Minimum Cancel Time 137, 153 Minimum Length 155, 157, 160, 161, 162, 163, 164 Min Scan Duration 169 Preliminary Draft one dimensional internal scanner 201 One Shot Mode 90 ON For 89 Power Management Properties 100 battery capacity 100 suspend, power saving 101 Power Source 101 Prefix 139 Prefix Char 142, 143 Printer (serial service), Bluetooth 112 profile, creating backup 124 profile, restoring backup 128 Programs Command Prompt 46 Internet Explorer 46 Remote Desktop Connection 46 Windows Explorer 46 punctuation marks, accessing (SHIFT Key) 61 pairing Bluetooth devices 72, 111 Parameter Scanning 138, 154, 155, 156, 157, 159, 160, 161, 162, 163, 164 partitions creating 129 deleting 131 dismounting 131 formatting 131 management 131 mounting 132 PC, connecting Warrington to 190 PDF-417 151, 165, 173 phone, dialing 33 phone number, dialing 33 picker cradle installing cable 197 PIN, Bluetooth Controls 112 pinouts A-1 PINs, Bluetooth devices 113 Plessy Transmit Check Digit 161 port pinouts A-1 Port Prefix, Bluetooth Controls 117 port replicator 200 ports tether A-1 Postal PlaNET 175 PostNET 175 Royal 176 Power button 22, 60 powering up 22 quad dock (WA4204-G2) 194 modifier keys 61 locking 61 One Shot Mode 90 unlocking 61 mounting partitions 132 MSI Plessey 148, 161 name servers, assigning (Summit) 30 NOTIS Editing 148 NQuerty Retry, Bluetooth Controls 117 Index radio Bluetooth 110 Bluetooth specs 210 configuring 23 name servers (Summit) 30 specifications 209 802.11signal quality 69 radio specifications 209 Raster Expand Rate (2D) 139 Raster Height (2D) 139 Reading Range 154, 156, 159, 162 recalibrating (touchscreen) 65, 104 remote connect 79 Remote Desktop Connection 46 Repeat Delay (between key repeats) 87 Repeat Rate (of key repeats) 88 Repeat tab (key repeat settings) 87 RSS Code 150, 165, 173 Run (Start Menu) 50 safety instructions battery charger 185–186 scanner 200 safety warning, scanner 200 Same Read Timeout 154 Same Read Validate 154 Scan Data Format 139 Warrington Hand-Held Computer User Manual Index Preliminary Draft Scan Indicator 177 SCAN Key 62 Scan Log File 178 scanner decoded (internal) 136 decoded (ISCP) 153 imager 167 module (SE955) specifications 210 one dimensional (1D) internal scanner 201 options 200 safety warnings 200 techniques (scanning) 200 troubleshooting tips 201 scanning Aim Duration 137 aiming (target) dot duration 137 aiming pattern duration 137 appending characters 144, 177 Bad Scan Beep 177 Bi-Direction Redundancy 138 Check Digit Algorithm (MSI Plessey) 149 Check Digits (MSI Plessey) 148 Check Digit Verification 141 Check Digit Verification (I 2 of 5) 149 Click Data (appending data) 177 Click Time 176 CLSI Editing 148 Codabar 147 Code 128 143, 155 Code 128 Emulation 152 Code 32 Prefix 140 Code 39 140, 154 Code 93 147 Composite 151 Continuous Scan Mod 137 Conv. UPC-E To UPC-A 145 Conv. UPC-E1 To UPC-A 146 Convert To Code 32 140 Convert To EAN 13 150 Decode Perf. Level 142, 143 Decode Performance 142, 143 Delete Char Set ECIs 140 Discrete 2 of 5 150 Dot Time 137 double-click 176 EAN-8 Zero Extend 144 ECI Decoder 140 Enable Bookland 146 VI Warrington Hand-Held Computer User Manual Enable CC-AB 151 Enable CC-C 151 Enable RSS Expanded 151 Enable RSS Limited 151 Enable RSS-14 150 Enable TLC-39 151 Full ASCII 141 Good Scan Beep 177 laser duration 137 Laser On Time 137, 153 Linear Decode 146 Linear Security Level 138 Low Power Timeout 137 Micro PDF-417 152 Minimum Cancel Time 137 NOTIS Editing 148 Parameter Scanning 138 PDF-417 151 Postal PlaNET 175 PostNET 175 Royal 176 Prefix 139 prefix character 142, 143 removing characters 142, 144 RSS Code 150 safety instructions 200 Scan Data Format 139 Scan Indicator 177 Scan Log File 178 Scan Result 177 Scan Result Time 177 Security Level 146 Set Length L1 141 Set Length L2 141 Suffix 139 suffix character 142, 144 Supp. Redundancy 146 Supplementals 146 symbologies 134 target (aiming) dot duration 137 Translations tab 178 Transmit Check Digit 141 Transmit Check Digit (I 2 of 5) 150 Transmit Check Digit (MSI Plessey) 149 Transmit Code 1D Char 139 Trioptic Code 39, Enable 140 UPC-A Check Digit 144 UPC-A Preamble 144 Preliminary Draft UPC-EANI 146 UPC-EAN Shared Settings 159 UPC-E Check Digit 145 UPC-E Preamble 145 UPC-E1 Check Digit 145 UPC-E1 Preamble 145 1D internal 201 2D Maxicode 174 2D QR Code 174 2D UPC Half Block Stitching 147 Scanning Mode (2D) 139 Scan Result 177 Scan Result Time 177 screen stylus, using to navigate 37 touch pen, using 37 Windows CE, navigating 37 Security Level 146 security level icon 70 Security Settings 45 changing password 46 configuring taskbar 46 level 45 Supervisor 45 Teklogix 45 User 45 Servers, Bluetooth Controls 114 Services, Bluetooth Controls 112 Set Length L1 141 Set Length L2 141 Set PIN, Bluetooth Controls 113 Settings Control Panel 50 Network and Dial-up connections 50 Run 50 Taskbar and Start Menu 50 SE955 scanner specifications 210 SHIFT Key 61 Shutdown Cold Reset 52 Suspend 51 Warm Reset 52 Shutdown (Start Menu) 51 signal quality, 802.11 69 SIM card, inserting 72 SIP (Soft Input Panel 81 Sled See vehicle cradle. 196 Soft Input Panel (SIP) 81 Soft Scan Timeout 177 Index SPACE Key 62 specifications SE955 scanner 210 802.11b/g WLAN radio 209 Start/Stop Transmit 155, 160 Start Menu 43 cycle tasks 49 desktop 45 programs 46 Run 50 Security 45 Settings 50 Shutdown 51 system tray 48 task manager 49 Strip Leading 142, 144 Strip Trailing 142, 144 stylus (touch pen), using 37 Stylus Properties 104 Double-tap (stylus sensitivity) 104 Suffix 139 Suffix Char 142, 144 Supervisor security level 45 Supp. Redundancy (Code 128) 146 Supplementals (UPC-EAN) 146 Suspend (Shutdown menu) 51 Suspend Timeout 101 swap time (for battery) 59 symbologies, bar code 134 system tray 48 TAB Key 62 target dot, duration of 137 taskbar customizing 42 onscreen indicators battery gauge 69 docking devices 69 modifier keys 68 security level 70 802.11 radio signal quality 69 using 41 task manager 49 Teklogix security level 45 TekTerm application 79 Telepen 164 tether port pinout A-1 Total Recall Warrington Hand-Held Computer User Manual VII Preliminary Draft Index backup profile, creating 124 backup profile, restoring 128 touch pen, using 37 touchscreen recalibration 65, 104 stylus, using 37 touch pen, using 37 Translations parameters (bar codes) 178 Transmit Check Digit 155, 157, 158, 160, 161, 162, 163, 164 Transmit Check Digit (I 2 of 5) 150 Transmit Check Digit (MSI Plessey) 149 Transmit Code 1D Char 139 Transmit Number System 158 trigger mappings 106 Trigger-Press Type, Manage Triggers menu 108 triggers, configuring 105 Trioptic Code 39, Enable 140 troubleshooting tips (scanning) 201 UPC A 144, 158, 172 UPC-A Check Digit 144 UPC-A Preamble 144 UPC E 145, 158, 172 UPC-EAN 146 UPC-EAN Shared Settings 159 UPC-E Check Digit 145 UPC-E Preamble 145 UPC-E1 Check Digit 145 UPC-E1 Preamble 145 UPC Half Block Stitching, 2D 147 USB-Ethernet adaptor cable (WA4010) 191 User security level 45 vehicle cradle 196 powered 10-55 VDC 196 powered 12 VDC 196 unpowered 196 Voice phone dialer 33 Voice (phone options) 33 Voice options dialing a number 33 VIII Warrington Hand-Held Computer User Manual Warm Reset (Shutdown menu) 52 warnings 177 Window Height 168 Windows® Start Menu See Start Menu 43 Windows CE dialog box 52 files, folders, & programs, working with 38 Windows CE, navigating in 37 Windows Explorer 46 Window Width 168 1D internal scanner 201 2DAztec 174 2D Data Matrix 174 2D Maxicode 174 2D QR Code 174 2D Raster Expand Rate 139 2D UPC Half Block Stitching 147 36-key keyboard alpha keys, accessing 63 uppercase letters, creating 64 802.11b/g radio specifications 209 802.11 radio, configuring 23
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Page Mode : UseOutlines XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Copyright : Psion Teklogix Inc. Producer : Acrobat Distiller 8.1.0 (Windows) Creator Tool : FrameMaker 8.0 Modify Date : 2008:07:01 13:11:05+02:00 Create Date : 2008:05:15 22:04:28Z Metadata Date : 2008:07:01 13:11:05+02:00 Document ID : uuid:794617ae-c1dd-4a10-85ad-f4e4628f57b2 Instance ID : uuid:40412e82-28f3-405d-8f94-de6d08db52a5 Format : application/pdf Title : Ikôn Rugged PDA Phone User Manual Creator : Gabrielle Neff Has XFA : No Page Count : 233 Author : Gabrielle Neff Keywords : P/N, 8100147.AEXIF Metadata provided by EXIF.tools