Psion RA80211G 802.11b/g Wireless LAN CF Card User Manual User Guide Module rev 1

Download:
Mirror Download [FCC.gov]
Document ID	659653
Application ID	+6XkA+HhercNrl3/W+qYzw==
Document Description	User manual rev
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.33kB (154121 bits)
Date Submitted	2006-05-18 00:00:00
Date Available	2006-05-16 00:00:00
Creation Date	2006-03-08 13:39:11
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2006-05-18 14:39:20
Document Title	User Guide_Module rev.1.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	Salena

802.11b/g Wireless
LAN CF card
RA2040-G1
User Guide
Version 2.0
Jan.23, 2006
Wireless CF Card_RA2040-G1 Design Specification
Rev.6
A. Specifications
Host Interfaces
Compac t F las h
Compatible Interfaces
Compac t F las h Type ǿ
Form factor
Compac t F las h Type ǿ
Chipset
MARVELL 88W8385 + 88W8015
Operation Voltage
DC 3.3V
Network Standards
IEEE 802.11g/b
Modulation Techniques
DBPSK, DQPSK, CCK, 16QAM, 64QAM,
Modulation Technology
DSSS and OFDM
Data Rate
802.11b: 11, 5.5, 2, 1 Mbps
802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Network Architectures
Infrastructure and Ad Hoc
Operating Frequencies
2.4 – 2.4835 GHz
Operating Channels
802.11b/g: 1-11 for North America
Before antenna
RF Output Power
802.11b (1M,2M,5.5M,11M) : 13 dBm
802.11g (6M,9M,12M,18M,24M,36M, 48M,54M) : 13 dBm
802.11b:1M=-90dBm,2M=-90dBm,5.5M=-90dBm,11M=-87dBm
Receiver sensitivity
802-11g:6M=-83dBm,9M=-83dBm,12M=-83dBm,18M=-83dBm,24M=-81dBm
36M=-78dBm,48M=-74dBm,54M=-73dBm
Power Consumption
Tx peak: 500mA @ 3.3VDC; Rx peak: 275mA @ 3.3VDC
Support Voltage
3.3V
Security
Delay Tolerance
Software Support
Temperatures
WEP 64-and 128-bit encryption with hardware TKIP processing.
WPA
Multi-path R.M.S Delay Spread @ 10%FER
680 ns in 11M mode,150ns in 54M mode
Windows CE 4.2 & CE 5.0,.Linux
Operates from -20 to 70 к
Storage from -40 to 120 к
Humidity (non-condensing) 5 to 95%*
Wi-Fi Pretest*; FCC part 15C/15.247*; ETS 300 328-2*; UL*; IEC60950*; EN 301
Certifications
489-1,17*; prEN50371*;CE Mark*; TELEC*
*Per for m ap pro ved proc edu re is b ased on cus tomer’s re ques t.
WLFWire
-1-
B. Marvell WLAN 802.11b/g CF8385PN Software Feature
Short preamble
802.11b, 802.11g, and g/b mix-mode infrastructure
802.11b and 802.11g Adhoc mode
C o r e Fe a t u r e s
Transmit fragmentation and receive defragmentation
Client IEEE Power Save Infrastructure & Adhoc mode
Basic rate adaptation - 11g/b for optimizing each STA throughput
Background scan
64/ 128-bit WEP Encryption and open/ shared authentication
WPA PSK
WPA 802.1x
Security
WPAII PSK**
WPAII 802.1x**
Cisco CCX V1 (LEAP)**
Hardware AES
AH Security
IEEE 802.11b
IEEE 802.11g
IEEE Standards
IEEE 802.11d**
IEEE 802.11e (EDCA)**
IEEE 802.11e (HCCA)**
Ot he r Sta nd ar ds
Wi-Fi WME**
Wi-Fi WSM APSD**
Windows CE.net (CE4.2, CE5.0)
D r i ve r s f or t he f o l low ing Windows Pocket PC 2003
O pe rat i ng S ys t e ms
Windows Mobile Edition
Linux 2.4.22 and above
Ne tw ork Pr ot oco l
TCP/IP, IPX
** NOTE **
The transmitter module is authorized for use in specific End-product (WORKABOUT PRO
Hand-held Micro-computer as models of 7525C, 7525M-E and 7525S).
-2-
C. Block Diagram
***Subject to be changed without notice.
-3-
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This device is intended only for Psion Teklogix Inc’s 7525C, 7525M-E and
7525S Series PDA or Psion Teklogix Inc’s platforms with substantially
similar physical dimensions, construction, and electrical and RF
characteristics under the following conditions:
1) The transmitter module may not be co-located with any other transmitter
except Bluetooth device FCC ID: GM37525BTB which has been certified
with this product.
2) Product can be sold only to end-user who already has the Psion
Teklogix Inc’s products, or be used in Psion Teklogix’s product lines
as mentioned above. The product shall not be marketed at public
retail stores.
Psion Teklogix Inc is responsible for testing their end-product for any
additional compliance requirements required with this module installed (for
example, digital device emissions, PC peripheral requirements, etc.).
IMPORTANT NOTE: Please notice that this product is only for Psion’s 7525C,
7525M-E and 7525S Series PDA or Psion’s platforms with substantially similar
physical dimensions, construction, and electrical and RF characteristics. The
usage of this product in other application may cause violation to US/Canada
EMC or RF exposure rules and is prohibited.
End Product Labeling
The final end product must be labelled in a visible area with the following:
“Contains TX FCC ID: GM3RA80211G”.
Manual Information That Must be Included in End-Product
End-users must be provided with specific information required to satisfy RF
exposure compliance for the final host device.
The transmitter module must not be co-located or operated in conjunction with
any other transmitter or antenna not described in application filings under this
FCC ID: GM3RA80211G.
As long as the conditions mentioned above are met, further transmitter tests
will not be required. However, the grantee shall bear the responsibility for
compliance of the device in all final host configurations.
IMPORTANT NOTE: If the conditions mentioned above cannot be met,
then the FCC authorization is no longer considered valid and the FCC ID
cannot be used on the final product. Under the circumstances, the grantee will
be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2006:05:18 14:39:20+08:00
Create Date                     : 2006:03:08 13:39:11+08:00
Page Count                      : 7
Has XFA                         : No
About                           : uuid:13a423bd-60d4-4e7f-8c5a-c4c6e6f29bda
Producer                        : Acrobat Distiller 7.0 (Windows)
Creation Date                   : 2006:03:08 13:39:11+08:00
Mod Date                        : 2006:05:18 14:39:20+08:00
Author                          : Salena
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2006:05:18 14:39:20+08:00
Document ID                     : uuid:4be930f5-7a12-4494-955c-37cfea72af29
Instance ID                     : uuid:0694f60e-6662-4fee-a638-6e5f78795fc6
Format                          : application/pdf
Title                           : User Guide_Module rev.1.pdf
Creator                         : Salena

EXIF Metadata provided by EXIF.tools