103146 1 Weg Variable Frequency Drive Brochure User Manual
User Manual: Pump 103146 1 Weg Variable Frequency Drive Brochure
Open the PDF directly: View PDF 
.
Page Count: 12
C F W11
Variable Frequency Drive
g Easy installation of
options and
accessories
g Free superdrive PC/
Drive communication
software
USACFW1109
Motors | Automation | Energy | Transmission & Distribution | Coatings
1-800-ASK-4WEG
www.weg.net
2Data is subject to change without notice.
C F W11
Variable Frequency Drives
WEG's CFW11 uses state-of-the-art technology to control motors
up to 600HP. Aimed at increasing customers productivity, the
CFW11 offers the following innovations:
Mounting Options
Standard Features
g Same programming as all other WEG VFD's
g Plug and play philosophy (connect and use) enables quick and easy
installation of accessories and options.
g USB for microcomputer connection for using SUPERDRIVE programming
and monitoring software as well as updating inverter firmware.
g Human-Machine Interface (HMI) with backlit graphic display and soft-keys,
greatly facilitates inverter programming and operation.
g DC link inductors (symetrically connected to positive and negative DC link
terminals) enable compliance with IEC61000-3-12 standard requirements
regarding harmonics, (no need for external line reactance)
g Intelligent thermal management enables full protection of IGBTs, monitoring
of heatsink and internal air temperature.
g Automatic control of the heatsink fan with speed sensor (additional
protection) and easily detachable from the unit for cleaning and
maintenance.
g Normal Duty and Heavy Duty ratings to adapt optimally to all kinds of
loads.
g Protection with failure and alarm warnings.
g Motor overload protection in compliance with IEC 60947-4-2/UL 508 C.
g Memory card built into the standard product allows user to create functions
without the need to use an external PLC (soft-PLC via IEC61131-3
programming software)
g Guided start-up simplifies initial user
programming.
g Real time clock
g TRACE / SCOPE function to assist with the start-up and system diagnostics.
Options
g Safety stop in
compliance
with EN 954 - 1 /
category III**
g External control feed
with 24 Vdc
g RFI filter in
compliance with EN
61800 - 3 (internal)**
g DB Resistors
available upon
request
** Factory ordered
Applications
g Pumps
g Fans / Blowers
g Conveyors
g Compressors
g Agitators and Mixers
g Extruders
g Grizzly Feeders
g Centrifuges
g Cranes and Hoists
g Rollout Tables
g Presses
g Saws
WEG Automation - Products and Solutions
www.weg.net
3
C F W11
Variable Frequency Drives
1.5 to 600 HP
Coding
1.
CFW11
2
0006
3
T
4
4
5
O
6
N1
7
Z
1. CFW11 series
2. Frame Size: = A, B, C, D or E 0006 = 6 Amps
0024 = 24Amps
0242 = 242Amps
0601 = 601 Amps
3. Number of Phase: B = Single phase or Three phase
S = Single phase
T = Three Phase
4. Input Voltage: 2 = 200...240VAC
4 = 380...480VAC
5. Options: S = Standard
O = An option function built-in (Ex. ON1 - NEMA1 included)
6. Enclosure: N1 = NEMA 1
7. End of Code: Z
1-800-ASK-4WEG
www.weg.net
4
The CFW11 frequency inverter incorporates Plug and Play technology automatically
recognizing and configuring accessories and options used, enabling easy installation and
safe operation while eliminating manual configuration.
Accessories
Name Description Slot
IOA-01
IOA Module for CFW11: 1 analog input (AI4 - 14
bits, voltage or current); 2 digital inputs; 2 analog
outputs (AO3 and AO4 -14 bits, voltage or
current); 2 digital outputs (open-collector). All
analog input and output are galvanic isolated.
1
IOB-01
IOB Module for CFW11: 2 isolated analog inputs
(AI3 and AI4 - 12 bits, voltage or current); 2 digital
inputs; Provides Galvanic Isolation for AO1 and
AO2 - 11 bits, voltage or current); 2 digital outputs
(open-collector). All analog inputs and outputs are
galvanically isolated.
1
IOC-01 (*) 8 digital inputs and outputs 1
IOE-01 (*) 6 - PT100 or KTY 84 - thermistor inputs 1
ENC-01 Interface for incremental encoder 5 to 12Vdc,
100kHz (1) with repeater 2
ENC-02 Interface for incremental encoder 5 to 12Vdc,
100kHz(1) 2
RS485-01 Interface for RS-485 serial communication
(modbus) 3
RS232-01 Interface for RS-232C serial communication 3
CAN/RS485-01 CAN interface (CANopen, DeviceNet); RS-485 3
CAN-01 CAN interface (CANopen, DeviceNet) 3
PROFIBUS DP-01
(*) Profibus DP interface 3
PLC11-01 (*)
PLC functions; IEC programming; electronic gear box
1, 2
and 3
9 digital inputs; 3 relay outputs; 3 digital outputs
14-bit analog input; 2 analog outputs with 14-bit
resolution
2 encoder interfaces; RS-485 MODBUS-RTU; CAN
(CANopen, DeviceNet, CANopen master/slave)
PROFIBUS DP-05* Profibus DP interface (Anybus) 4
Devicenet-05* Devicenet 4 interface (Anybus) 4
EtherNet IP-05 (*) Ethernet IP interface (Anybus) 4
HMID - 01 Blind cover for slot HMI -
RHMIF - 01 Frame for remote HMI -
KN1A - 01 Conduit kit for size A -
KN1B - 01 Conduit kit for size B -
KN1C - 01 Conduit kit for size C -
Note: * Anybus card goes in slot 4 and allows the user to combine PLC11 board with Profibus DP-05,
Devicenet-05 or Ethernet IP-05
Variable Frequency Drives
C F W11
Plug and Play
WEG Automation - Products and Solutions
www.weg.net
5
Programming software for PC (USB connection), Windows™
environment for parametrization, command and monitoring
of CFW11 inverters.
Human/Machine Interface
Left soft key: function
defined by the text in the display
Right soft key: function defined by
the text in the display.
Monitoring Modes
Variable Frequency Drives
C F W11
Superdrive Programming Software
1-800-ASK-4WEG
www.weg.net
6
Variable Frequency Drives
C F W11
(NEMA1/IP21 Frame size A, B, C – NEMA1/IP20 Frame Size D)
Motor
Volts HP Amps HP Amps CATALOG NUMBER Frame
Size Enclosure DB DIMENSIONS
H x W x D
App. Shpg. Wt.
(lbs.)
Multiplier
Symbol
230V
INPUT POWER SUPPLY: SINGLE OR THREE PHASE - 200…240V
1.5 6 1.5 5 CFW110006B2ON1Z A NEMA 1 YES 12.04 x 5.71 x 8.94 19.9 V1
2 7 2 7 CFW110007B2ON1Z A NEMA 1 12.04 x 5.71 x 8.94 20.8 V1
INPUT POWER SUPPLY: SINGLE PHASE - 200…240V
3 10 3 10 CFW110010S2ON1Z A NEMA 1 YES 12.04 x 5.71 x 8.94 20.8 V1
INPUT POWER SUPPLY: THREE PHASE - 200…240V
2 7 1.5 5.5 CFW110007T2ON1Z A NEMA 1 YES 12.04 x 5.71 x 8.94 19.9 V1
3 10 2 8 CFW110010T2ON1Z A NEMA 1 12.04 x 5.71 x 8.94 19.9 V1
5 13 3 11 CFW110013T2ON1Z A NEMA 1 12.04 x 5.71 x 8.94 20.8 V1
5 16 5 13 CFW110016T2ON1Z A NEMA 1 12.04 x 5.71 x 8.94 21.2 V1
7.5 24 7.5 20 CFW110024T2ON1Z B NEMA 1 13.82 x 7.45 x 8.94 28.5 V1
10 28 10 24 CFW110028T2ON1Z B NEMA 1 13.82 x 7.45 x 8.94 28.5 V1
10 33.5 10 28 CFW110033T2ON1Z B NEMA 1 13.82 x 7.45 x 8.94 28.5 V1
15 45 15 36 CFW110045T2ON1Z C NEMA 1 17.64 x 8.66 x 11.51 44.1 V1
20 54 20 45 CFW110054T2ON1Z C NEMA 1 17.64 x 8.66 x 11.51 45 V1
25 70 20 56 CFW110070T2ON1Z C NEMA 1 17.64 x 8.66 x 11.51 49.2 V1
30 86 25 70 CFW110086T2ON1Z D NEMA 1 19.82 x 11.81 x 12 115.9 V1
40 105 30 86 CFW110105T2ON1Z D NEMA 1 19.82 x 11.81 x 12 120.2 V1
50 142 40 115 CFW110142T2ON1Z E NEMA 1 NO 26.6 x 13.2 x 14.1 150 V1
60 180 50 142 CFW110180T2ON1Z E NEMA 1 26.6 x 13.2 x 14.1 150 V1
75 211 60 180 CFW110211T2ON1Z E NEMA 1 26.6 x 13.2 x 14.1 150 V1
50 142 40 115 CFW110142T2ON1DBZ E NEMA 1 YES 26.6 x 13.2 x 14.1 150 V1
60 180 50 142 CFW110180T2ON1DBZ E NEMA 1 26.6 x 13.2 x 14.1 150 V1
75 211 60 180 CFW110211T2ON1DBZ E NEMA 1 26.6 x 13.2 x 14.1 150 V1
480V
INPUT POWER SUPPLY: THREE PHASE - 380…480V
2 3.6 2 3.6 CFW110003T4ON1Z A NEMA 1 YES 12.04 x 5.71 x 8.94 19.9 V1
3 5 3 5 CFW110005T4ON1Z A NEMA 1 12.04 x 5.71 x 8.94 20.3 V1
5 7 3 5.5 CFW110007T4ON1Z A NEMA 1 12.04 x 5.71 x 8.94 20.3 V1
7.5 10 5 10 CFW110010T4ON1Z A NEMA 1 12.04 x 5.71 x 8.94 20.8 V1
10 13.5 7.5 11 CFW110013T4ON1Z A NEMA 1 12.04 x 5.71 x 8.94 21.2 V1
10 17 10 13.5 CFW110017T4ON1Z B NEMA 1 13.82 x 7.45 x 8.94 28.5 V1
15 24 10 19 CFW110024T4ON1Z B NEMA 1 13.82 x 7.45 x 8.94 29.8 V1
20 31 15 25 CFW110031T4ON1Z B NEMA 1 13.82 x 7.45 x 8.94 31.3 V1
25 38 20 33 CFW110038T4ON1Z C NEMA 1 17.64 x 8.66 x 11.51 45.9 V1
30 45 25 38 CFW110045T4ON1Z C NEMA 1 17.64 x 8.66 x 11.51 52.9 V1
40 58.5 30 47 CFW110058T4ON1Z C NEMA 1 17.64 x 8.66 x 11.51 54.9 V1
50/60 70.5 40 61 CFW110070T4ON1Z D NEMA 1 19.82 x 11.81 x 12 119.5 V1
75 88 50 73 CFW110088T4ON1Z D NEMA 1 19.82 x 11.81 x 12 122.8 V1
75 105 75 88 CFW110105T4ON1Z E NEMA 1 NO 26.6 x 13.2 x 14.1 150 V1
100/125 142 75 115 CFW110142T4ON1Z E NEMA 1 26.6 x 13.2 x 14.1 150 V1
150 180 100 142 CFW110180T4ON1Z E NEMA 1 26.6 x 13.2 x 14.1 150 V1
175 211 125 180 CFW110211T4ON1Z E NEMA 1 26.6 x 13.2 x 14.1 150 V1
75 105 75 88 CFW110105T4ON1DBZ E NEMA 1 YES 26.6 x 13.2 x 14.1 150 V1
100/125 142 75 115 CFW110142T4ON1DBZ E NEMA 1 26.6 x 13.2 x 14.1 150 V1
150 180 100 142 CFW110180T4ON1DBZ E NEMA 1 26.6 x 13.2 x 14.1 150 V1
175 211 125 180 CFW110211T4ON1DBZ E NEMA 1 26.6 x 13.2 x 14.1 150 V1
200 242 150 211 CFW110242T4SZ F IP20 NO 48.6 x 16.9 x 14.2 267 V1
250 312 200 242 CFW110312T4SZ F IP20 48.6 x 16.9 x 14.2 271 V1
300 370 250 312 CFW110370T4SZ F IP20 48.6 x 16.9 x 14.2 277 V1
350 477 300 370 CFW110477T4SZ F IP20 48.6 x 16.9 x 14.2 287 V1
400 515 350 477 CFW110515T4SZ G IP20 NO 50 x 21.1 x 16.8 420 V1
500 601 450 515 CFW110601T4SZ G IP20 50 x 21.1 x 16.8 425 V1
600 720 500 601 CFW110720T4SZ G IP20 50 x 21.1 x 16.8 441 V1
Notes: ”HP” rating based on FLA values from WEG W22, 2 and 4 poles, 460VAC, NEMA Premium motors”.
Use as a guide only. Motor FLA may vary with speed and manufacturer.
ALWAYS compare motor FLA to Nominal AMPS of VFD and overload conditions.
WEG Automation - Products and Solutions
www.weg.net
7
Data is subject to change without notice.
Variable Frequency Drives
C F W11
Options and Accessories
DESCRIPTION CATALOG NUMBER Multiplier Symbol
I/O Exp
Modules
IOA Module for CFW11: 1 analog input (AI4 - 14 bits, voltage or current); 2 digital inputs; 2 analog
outputs (AO3 and AO4 -14 bits, voltage or current); 2 digital outputs (open-collector). All analog
input and output are galvanic isolated.
IOA-01 V1
IOB Module for CFW11: 2 isolated analog inputs (AI3 and AI4 - 12 bits, voltage or current); 2 digital
inputs; Provides Galvanic Isolation for AO1 and AO2 - 11 bits, voltage or current); 2 digital outputs
(open-collector). All analog inputs and outputs are galvanically isolated.
IOB-01 V1
Incremental encoder module, 5 to 12 VDC at 100 kHZ, with encoder signal repeater ENC-01 V1
Incremental encoder module, 5 to 12 VDC at 100 kHZ, without encoder signal repeater ENC-02 V1
Communication Modules
RS-485 serial communication module (Modbus-RTU) RS485-01 V1
RS-232C serial communication module (Modbus-RTU) RS232-01 V1
RS232C serial commuication module with DIP-switches for microcontroller’s flash memory
programming RS232-02 V1
CAN and RS-485 communication module (CANopen / Modbus / DeviceNet) CAN/RS485-01 V1
CAN interface module (CANopen / DeviceNet CAN-01 V1
Profibus DP interface module - Anybus card* PROFDP-05 V1
DeviceNet interface module - Anybus card* DEVICENET-05 V1
Ethernet/IP interface module - Anybus card* ETHERNET/IP-05 V1
RS-232 serial communication module (Modbus-RTU) RS232-05 V1
RS-485 serial communication module (Modbus-RTU) RS485-05 V1
PLC & Flash
Memory
Modules
PLC functions; Ladder programming; electronic gear box; 9 digital inputs; 3 dry-contact digital
outputs; 3 open-collector digital outputs; 1 analog input (14 bits); 2 analog outputs (14 bits); 2
encoder interfaces; RS-485 Mobus-RTU interface; CAN interface (CANopen, CANopen master/slave)
PLC11-01 V1
Flash Memory Module for CFW11 MMF-01 V1
Keypad Accessories and Remote Keypad
Cables
CFW11 keypad HMI-01 V1
Frame for keypad remote assembly RHMIF-01 V1
Blank cover for keypad slot HMID-01 V1
1m (3.3ft) remote keypad cable IHM-CAB-RS-1M V1
2m (6.6ft) remote keypad cable IHM-CAB-RS-2M V1
3m (10ft) remote keypad cable IHM-CAB-RS-3M V1
5m (16ft) remote keypad cable IHM-CAB-RS-5M V1
7.5m (25ft) remote keypad cable IHM-CAB-RS-7.5M V1
10m (33ft) remote keypad cable IHM-CAB-RS-10M V1
Remote Station-includes Start PB, Stop PB, 1-NC and 1-NO contact block, Potentiometer 5k and
legends (22mm) replaces CFW-REM CSW-SP3PBS Z5
Remote Station-includes Start PB, Stop PB, 1-NC and 1-NO contact block, Potentiometer 5k and
legends (30mm) replaces CFW-REM CSW30-SP3PBS Z5
Conduit Kit
Conduit Kit for frame size A KN1A-01 V1
Conduit Kit for frame size B KN1B-01 V1
Conduit Kit for frame size C KN1C-01 V1
IP21 Kit for frame size D KIP21D-01 V1
Shielding Kit
Power Cables Shielding Kit for frame size A PCSA-01 V1
Power Cables Shielding Kit for frame size B PCSB-01 V1
Power Cables Shielding Kit for frame size C PCSC-01 V1
Power cables shielding kit for frame size D PCSD-01 V1
Power cables shielding kit for frame size E PCSD-01 V1
*Anybus card goes in slot 4 and allows the user to combine the PLC11 board with DeviceNet, Profibus, or Enternet/IP.
Encoder
Modules
1-800-ASK-4WEG
www.weg.net
8
Supply 200...240V: +10% ...-15% of rated voltage
380...480V: +10% ...-15% of rated voltage
Supply frequency 50/60Hz, +/-2Hz
Output frequency 0 to 300Hz
Types of control
Vector with encoder
Vector sensorless
V V W: voltage vector
V/F (scalar)
Ambient temperature -10 ...50ºC
up to 60º with output current reduction (2%/ºC above 50ºC)
Humidity 5 to 90% without condensation
Altitude 0 to 1000m
Up to 4000m without current reduction (1%n for each 100m above 1000m)
Braking methods
Dynamic braking (available in all standard models)
Optimal braking
DC braking
Efficiency Greater than 97%
Degree of protection IP21 for models with A, B and C sizes
IP20 / NEMA1 for models with D size
Possibility of flange mounting Available in all standard models, rear part of heatsink with IP54 degree of protection
Overload Normal Duty: 110%, 60s
Heavy Duty: 150%, 60s
Analog inputs 1 differential, resolution 12 bits, 0 to 10V/(0)4 to 20mA
1 differential, resolution 11 bits + signal, 0 to +/- 10V/(0)4 to 20mA
Analog outputs 2 isolated, resolution 11 bits, 0 to 10V/(0)4 to 20mA
Digital inputs 6 optoisolated, bi-directional, 24Vdc
Relay outputs 3 reverse contact outputs (NO/NC), 240Vac/1A
Motor thermistor PTC/PT100/KTY84, use 1 analog output programmed for contstant current + 1 analog input programmed
for voltage
Supply + 24Vdc available for user 24Vdc +\-20%, 500ma
Norms
IEC 60146 – Semiconductor convertors
UL508C – Safety for power conversion equipment
EN 50178 – Electronic equipment for use in power installations
EN 61800-2 – General requirements adjustable speed electrical power drive systems
EN 61800-5-1 – Safety requirements adjustable speed electrical power drive systems
EN 61800-3 – EMC product standard including specific test methods adjustable speed electrical power drive
systems
EN 60204 – Electronic equipment of machines
RoHS and WEEE Guidelines
Variable Frequency Drives
C F W11
Technical Data
WEG Automation - Products and Solutions
www.weg.net
9
Communication Options
The table below shows the hardware options required to provide WEG VFD’s and Soft Starters
with different serial communications or networking capabilities.
Superdrive
WEG Superdrive is a windows based software program that allows serial (RS - 232 or RS - 485)
communication between a PC and all WEG Soft Starters and Variable Frequency Drives. Superdrive is
an excellent programming, documentation, and troubleshooting tool for WEG Soft Starters and VFD’s.
Superdrive is available for free download at www.wegelectric.com.
Hardware accessories may be required depending on the Soft Starter or VFD line.
Standard Features
g Online and Offline Soft Starter or VFD programming
g Command and Monitoring
g Parameter set storage in a computer file format
Variable Frequency Drives
Communication Options & Superdrive
Profibus, Modbus and Device Net
Description Catalog Number Multiplier
Symbol
SUPERDRIVE Software SUPERDRIVE V1
SUPERDRIVE Software + USB Cable SUPERDRIVE+USB V1
SUPERDRIVE KIT - CFW08 (KCS-CFW08 - RS232 PC Cable + CD Software) KSD-CFW08 V1
SUPERDRIVE KIT - CFW09 (KCS-CFW09 - RS232 PC Cable + CD Software) KSD-CFW09 V1
SUPERDRIVE G2 KIT - SSW06 KSDG2-SSW06 V1
SUPERDRIVE G2 KIT - SSW07 (KRS-232-SSW07 + CAB-RS-3 + CD Software) KSDG2-SSW07 V1
RS-232/485 Converter (mounted externally) MIW-02 V1
RS-485 Kit for PC 417102506 V1
RS-232 RS-485 Profibus-DP DeviceNet Modbus-RTU
CFW08 KCS-CFW08 KCS-CFW08 MIW-02
KCS-CFW08
MIW-02
MFW-01/PD
KCS-CFW08
MIW-02
MFW-01/DN
KCS-CFW08
MIW-02
CFW09 See CFW09 accessories
CFW11 See CFW11 accessories
SSW03 Standard MIW-02 MIW-02
MFW-01/PD
MIW-02
MFW-01/DN
MIW-02
MFW-01/MR
SSW04 Standard MIW-02 MIW-02
MFW-01/PD
MIW-02
MFW-01/DN
MIW-02
MFW-01/MR
SSW05 Standard MIW-02 MIW-02
MFW-01/PD
MIW-02
MFW-01/DN
MIW-02
MFW-01/MR
SSW06 Standard KRS-485-SSW06 KFB-PD-SSW06 KFB-DN-SSW06 MIW-02
MFW-01/MR
SSW07 See SSW07 Accessories
"RS-485 Kit for PC" is required when SUPERDRIVE communicates with a multi drive RS-485
network. It is composed of a RS-232/RS-485 converter and a cable to connect to PC.
WEG Automation - Products and Solutions
www.weg.net
10
1-877-WEG-DRIV
for Drives and Soft Starters
Technical
Support
24
/
7
(934-3748)
www.weg.net
Notes
WEG is known for its global sales and service capabilities which
allow us to provide custom solutions all over the world. With a full
range of IEC/NEMA Global Certications and a full-line of motors,
automation, controls, transformers, and generators, WEG can sup-
ply and support the right product for your needs anywhere in the
world. To learn more about our company and solutions, or to locate
a U.S. Distributor near you, call 1-800-ASK-4WEG.
IMPORTANT NUMBERS
for doing Business with WEG
1-800-ASK-4WEG Sales (M-F, 8am-5pm EST).
(275 - 4934)
1-770-338-1632 Fax for inside sales
1-800-839-2529 Warranty & Parts
1-404-431-1801 After Hours Sales Emergency
1-877-WEG-DRIV 24/7 Drives Tech Support
(934 - 3748)
wegsales@weg.net Email
parts@weg.net Parts Email
WEG Electric Corp.
6655 Sugarloaf Parkway, Duluth, GA 30097
WEG Electric Corp.
6655 Sugarloaf Parkway
Duluth, GA 30097
Phone: 1-800-ASK-4WEG
web: www.weg.net
USACFW1109
Please contact your authorized distributor:
WEG Electric Corp. offers the following products, and more! With a full range
of IEC/NEMA Global Certifications and a full line of products, WEG can supply
the right solution for your needs anywhere in the world. To learn more about
WEG’s products and solutions or to locate a Distributor near you, please call
1-800-ASK-4WEG or visit www.weg.net/us.
Low Voltage Motors,
Single and 3-Phase, 1/8 – 700HP
General Purpose Motors
Explosion Proof Motors
Crusher Duty Motors
IEC Tru-Metric Motors
Pump Motors including JP/JM
P-Base Pump Motors
Oil Well Pumping Motors
Pool & Spa Motors
Brake Motors
Compressor Duty Motors
Farm Duty Motors
Poultry Fan Motors
Auger Drive Motors
IEEE 841 Motors
Stainless Steel Wash Down Motors
Saw Arbor Motors
Cooling Tower Motors
Commercial HVAC Motors
Pad Mounted Motors
Vector Duty Motors
Large Electric Motors
Low Voltage 3-phase motors up to
2,500HP
Motors up to 70,000HP and 13,200V
Wound Rotor Systems (including starters)
up to 70,000HP and 13,200V
Synchronous Motors up to 70,000HP and
13,200V
Explosion proof motors (Ex-d) up to
1,500kW and 11kV
Ex-n, Ex-e, Ex-p motors
Variable Frequency Drives
Low Voltage 1/4 to 2500HP, 230V – 480V
Medium Voltage 500-8000HP
Multi-pump systems
NEMA 4X
Dynamic braking resistors
Line and load reactors
Plug and play technology
Network communications: Profibus-DP,
DeviceNet, Modbus-RTU
PLC functions integrated
Complete line of options and accessories
Soft Starters
3-1500HP
Oriented start-up
Built-in bypass contactor
Universal source voltage (230-575V,
50/60Hz)
Network communications: Profibus-DP,
DeviceNet, Modbus-RTU
Complete Line of options and accessories
MV Soft-starter 3.3kV, 4.16kV: up to
3500HP, Withdrawable Power Stacks, & 8x
PT100 Temperature monitoring
Controls
Mini – Contactors
IEC Contactors
Thermal Overload Relays
Manual Motor Protectors
Molded Case Circuit Breakers
Smart Relays
Enclosed Starters: combination & non-
combination,
Pushbuttons & Pilot Lights
Timing & Motor Protection Relays
Terminal Blocks
Custom Panels
Custom configured to your specification.
NEMA 1, 12, 3R, 4 and 4X cabinets
Quick delivery of preconfigured drives
and soft starters
UL 508 certified
Low Voltage (230-460)
Made in the U.S.A.
Generators
Brushless Synchronous Generators for
diesel gen-sets up to 4,200kVA
Hydro-generators up to 25,000kVA
Turbo-generators up to 62,500kVA
Power Transformers
Built and engineered in North America
Voltages < 500kV
Ratings 5-300MVA
Station class, oil filled, round core, copper
windings
Special configurations and designs
available!
Ask your WEG Sales Representative for
details.
Designed, built, and engineered to ANSI
standards.
Custom Solution Package Sales
WEG can package any of its products for
ease of sale! Enjoy a single point of contact
for the entire package of products and
assistance from quote through after-sales
support. Ask your WEG Sales
Representative for details.
confirmed 8/2012
