103146 3 Weg Variable Frequency Drive Programming Manual User

• Summary
• Quick Parameter Reference, Faults and Alarms
• SAFETY NOTICES
  • 1.1 SAFETY NOTICES IN THIS MANUAL
  • 1.2 SAFETY NOTICES ON THE PRODUCT
  • 1.3 PRELIMINARY RECOMMENDATIOTIONS
• GENERAL INFORMATION
  • 2.1 ABOUT THIS MANUAL
  • 2.2 TERMINOLOGY AND DEFINITIONS
    • 2.2.1 Terms and Definitions Used in the Manual
    • 2.2.2 Numerical Representation
    • 2.2.3 Symbols for the Parameter Proprieties Description
• ABOUT THE CFW-11
  • 3.1 ABOUT THE CFW-11
• KEYPAD (HMI)
  • 4.1 KEYPAD (HMI)
• PROGRAMMING BASIC INSTRUCTIONS
  • 5.1 PARAMETER STRUCTURE
  • 5.2 GROUPS ACCESSED IN THE OPTION MENU IN THE MONITORING MODE
  • 5.3 PASSWORD SETTING IN P0000
  • 5.4 HMI [30]
  • 5.5 DATE AND TIME SETTING
  • 5.6 DISPLAY INDICATIONS IN THE MONITORING MODE SETTINGS
  • 5.7 INCOMPATIBILITY BETWEEN PARAMETERS
• INVERTER MODEL AND ACCESSORIES IDENTIFICATION
  • 6.1 INVERTER DATA [42]
• STARTING-UP AND SETTINGS
  • 7.1 BACKUP PARAMETERS [06]
• AVAILABLE CONTROL TYPES
  • 8.1 CONTROL TYPES
• SCALAR CONTROL (V/f)
  • 9.1 V/f CONTROL [23]
  • 9.2 ADJUSTABLE V/f CURVE [24]
  • 9.3 V/f CURRENT LIMITATION [26]
  • 9.4 V/f DC VOLTAGE LIMITATION [27]
  • 9.5 START-UP IN THE V/f CONTROL MODE
• VVW CONTROL
  • 10.1 VVW CONTROL [25]
  • 10.2 MOTOR DATA [43]
  • 10.3 VVW CONTROL MODE START-UP
• VECTOR CONTROL
  • 11.1 SENSORLESS CONTROL AND WITH ENCODER
  • 11.2 I/F MODE (SENSORLESS)
  • 11.3 SELF-TUNING
  • 11.4 OPTIMAL FLUX FOR SENSORLESS VECTOR CONTROL
  • 11.5 TORQUE CONTROL
  • 11.6 OPTIMAL BRAKING
  • 11.7 MOTOR DATA [43]
    • 11.7.1 Adjustment of the Parameters P0409 to P0412 Based on the Motor Data Sheet
  • 11.8 VECTOR CONTROL [29]
    • 11.8.1 Speed Regulator [90]
    • 11.8.2 Current Regulator [91]
    • 11.8.3 Flux Regulator [92]
    • 11.8.4 I/f Control [93]
    • 11.8.5 Self-Tuning [05] and [94]
    • 11.8.6 Torque Current Limitation [95]
    • 11.8.7 DC Link Regulator [96]
  • 11.9 START-UP IN THE VECTOR MODES SENSORLESS AND WITH ENCODER
• FUNCTIONS COMMON TO ALL THE CONTROL MODES
  • 12.1 RAMPS [20]
  • 12.2 SPEED REFERENCES [21]
  • 12.3 SPEED LIMITS [22]
  • 12.4 MULTISPEED [36]
  • 12.5 ELECTRONIC POTENTIOMETER [37]
  • 12.6 ZERO SPEED LOGIC [35]
  • 12.7 FLYING START/RIDE-THROUGH [44]
    • 12.7.1 V/f Flying Start
    • 12.7.2 Vector Flying Start
      • 12.7.2.1 P0202=3
      • 12.7.2.2 P0202=4
    • 12.7.3 V/f Ride-Through
    • 12.7.4 Vector Ride-Through
  • 12.8 DC BRAKING [47]
  • 12.9 SKIP SPEED [48]
  • 12.10 SEARCH OF ZERO OF THE ENCODER
• DIGITAL AND ANALOG INPUTS AND OUTPUTS
  • 13.1 I/O CONFIGURATION [07]
    • 13.1.1 Analog Inputs [38]
    • 13.1.2 Analog Outputs [39]
    • 13.1.3 Digital Inputs [40]
    • 13.1.4 Digital Outputs / Relays [41]
  • 13.2 LOCAL COMMAND [31]
  • 13.3 REMOTE COMMAND [32]
  • 13.4 3-WIRE COMMAND [33]
  • 13.5 FORWARD RUN/REVERSE RUN COMMANDS [34]
• DYNAMIC BRAKING
  • 14.1 DYNAMIC BRAKING [28]
• FAULTS AND ALARMS
  • 15.1 MOTOR OVERLOAD PROTECTION
  • 15.2 MOTOR OVERTEMPERATURE PROTECTION
  • 15.3 PROTECTIONS [45]
• READ ONLY PARAMETERS [09]
  • 16.1 FAULT HISTORY [08]
• COMMUNICATION [49]
  • 17.1 RS-232 AND RS-485 SERIAL INTERFACE
  • 17.2 CAN INTERFACE - CANOPEN/DEVICENET
  • 17.3 ANYBUS-CC INTERFACE
  • 17.4 COMMUNICATION STATES AND COMMANDS
• SOFTPLC [50]
  • 18.1 SOFTPLC
• TRACE FUNCTION [52]
  • 19.1 TRACE FUNTION
• PID REGULATOR [46]
  • 20.1 DESCRIPTION AND DEFINITIONS
  • 20.2 COMMISSIONING
  • 20.3 SLEEP MODE
  • 20.4 MONITORING MODE SCREENS
  • 20.5 CONNECTION OF A 2-WIRE TRANSDUCER
  • 20.6 PARAMETERS
  • 20.7 ACADEMIC PID