233 2 Zoeller X290 Series Explosion Proof Pump Specifications Company User Manual
4229 2 Zoeller X290 Series Explosion Proof Pump Specifications 4229_2_Zoeller X290 Series Explosion Proof Pump Specifications
4294 2 Zoeller X290 Series Explosion Proof Pump Specifications 4294_2_Zoeller X290 Series Explosion Proof Pump Specifications
4308 2 Zoeller X290 Series Explosion Proof Pump Specifications 4308_2_Zoeller X290 Series Explosion Proof Pump Specifications
4253 2 Zoeller X290 Series Explosion Proof Pump Specifications 4253_2_Zoeller X290 Series Explosion Proof Pump Specifications
4271 2 Zoeller X290 Series Explosion Proof Pump Specifications 4271_2_Zoeller X290 Series Explosion Proof Pump Specifications
User Manual: Pump 233 2 Zoeller X290 Series Explosion Proof Pump Specifications
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
X290 Series Specifications Motor Characteristics Motor 1/2 - 2 HP Voltage 115 - 575 V Phase 1 or 3 Ph Hertz 60 Hz RPM 3450 RPM Type Permanent split capacitor or 3 phase Insulation Class B Amps 2.4 - 20.5 Amps Pump Characteristics Features This series of submersible pumps is designed for use in residential or commercial wastewater applications in Class I, Division 1, Group C and D locations. Each pump is FM/CSA approved and features innovative motor and electrical enclosures that are designed to reduce the risk of vapor ignition both inside and outside the pump. Should vapors inside the electrical enclosures become ignited, the enclosures are engineered to contain the event and prevent escalation. Each pump is constructed of hardware that will allow it to operate safely and efficiently in extreme conditions. As with every Zoeller pump, each one is 100% factory tested to ensure quality and reliability for years of troublefree performance! Automatic models are available with an optional seal failure panel (P/N 101031). Nonautomatic units require a Zoeller control panel with intrinsically safe relays and a moisture indicator. Surface temperature code T5 (1 Ph) or T6 (3 Ph). Includes a stainless steel lifting bracket for easy installation and removal. All models are hermetically sealed to be watertight, dust-tight, and completely submersible. Operation Automatic or nonautomatic Auto On/ Off Points 19-1/2" / 9-3/4" (49.5 cm / 24.8 cm) Discharge Size 2" or 3" NPT Solids Handling 2" (50 mm) spherical solids Cord Length 20' (6 m) standard Cord Type UL listed, 5-wire (1 Ph) or 8-wire (3 Ph) SOOW cord Max Head 75' (22.9 m) Max Flow Rate 214 GPM (810 LPM) Max Operating Temp 104 °F (40 °C) Cooling Oil filled with finned housings Motor Protection Auto reset thermal overload (1 Ph) or thermal sensor (3 Ph) Materials Characteristics Cap Cast iron Motor Housing Cast iron Pump Housing Cast iron Base Cast iron Upper Bearing Ball bearing Lower Bearing Ball bearing Mechanical Seals Carbon and ceramic with stainless steel parts Impeller Type Non-clogging vortex Impeller Cast iron, optional bronze Hardware Stainless steel or brass Motor Shaft 416 stainless steel Reserve Powered Design: For unusual conditions, a reserve safety factor is engineered into the design of every pump. FM1702_Ea Updated 0616 X290 Series Model Model Number Seal Mode Volts Phase Amps HP Hz Lbs Kg MX292 Single Auto 115 1 15.0 1/2 60 123 55 NX292 Single Non 115 1 15.0 1/2 60 118 53 BAX292 Single Non 575 3 2.4 1/2 60 121 54 DX293 Single Auto 230 1 10.2 1 60 123 55 EX293 Single Non 230 1 10.2 1 60 118 53 HX293 Single Auto 200 1 12.0 1 60 123 55 IX293 Single Non 200 1 12.0 1 60 121 54 FX293 Single Non 230 3 7.6 1 60 121 54 JX293 Single Non 200 3 8.2 1 60 121 54 GX293 Single Non 460 3 4.0 1 60 121 54 BAX293 Single Non 575 3 3.3 1 60 121 54 DX294 Single Auto 230 1 13.7 1-1/2 60 128 58 EX294 Single Non 230 1 13.7 1-1/2 60 121 54 HX294 Single Auto 200 1 17.8 1-1/2 60 128 58 IX294 Single Non 200 1 17.8 1-1/2 60 121 54 FX294 Single Non 230 3 9.5 1-1/2 60 121 54 JX294 Single Non 200 3 10.8 1-1/2 60 121 54 GX294 Single Non 460 3 4.8 1-1/2 60 121 54 BAX294 Single Non 575 3 3.8 1-1/2 60 121 54 DX295 Single Auto 230 1 17.1 2 60 128 58 EX295 Single Non 230 1 17.1 2 60 121 54 HX295 Single Auto 200 1 20.5 2 60 128 58 IX295 Single Non 200 1 20.5 2 60 121 54 FX295 Single Non 230 3 12.2 2 60 121 54 JX295 Single Non 200 3 14.3 2 60 121 54 GX295 Single Non 460 3 6.1 2 60 121 54 BAX295 Single Non 575 3 4.9 2 60 121 54 Additional cord lengths are available in 25' (8 m), 35' (11 m) and 50' (15 m). Automatic units Patent No. 8,535,014 Your Peace of Mind is Our Top Priority® 3649 Cane Run Rd | Louisville, KY 40211 USA +1 502-778-2731 | 1-800-928-7867 | Fax: +1 502-774-3624 www.zoeller.com Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. Copyright Zoeller Company. All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Format : application/pdf Creator : Zoeller Pump Company Description : Zoeller Pump Company Title : Zoeller Pump Company Creator Tool : Zoeller Pump Company Modify Date : 2017:02:01 13:43:02-05:00 Create Date : 2017:02:01 13:43:02-05:00 Metadata Date : 2017:02:01 13:43:02-05:00 Producer : Aspose.Pdf 7.3.0 Document ID : uuid:3056f7f5-b12e-4eb2-a0a0-5563b0492e88 Instance ID : uuid:abc7a4b6-ae54-4b9d-bc32-6013bc4acdfd Page Count : 2 Author : Zoeller Pump Company Keywords : Zoeller, Pump, Company Subject : Zoeller Pump CompanyEXIF Metadata provided by EXIF.tools