3955 1 Zoeller 267 0057 Brochure Fm0390 266/267/268 Catalog Sheet User Manual

User Manual: Pump 3955 1 Zoeller 267-0057 Brochure

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

SECTION: 2.30.020

Product information presented
here reﬂects conditions at time
of publication. Consult factory
regarding discrepancies or
inconsistencies.

FM0390
0804
Supersedes
0303
MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961
(502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624

visit our web site:
www.zoeller.com

COMPARE THESE FEATURES
• Float operated, submersible (NEMA 6) 2-pole
mechanical switch.
• Durable cast construction. ASTM Class 25 Cast
iron, switch case, and pump housing.
• Cast iron base on 267, 268.
• Engineered Plastic base on 266.
• Non-Clogging Vortex Impeller Design. Engineered
plastic impeller with metal inserts on models 266,
267 & 268 (1 PH). Model 267 available with cast
iron impeller option. (Cast iron impeller standard
on 3 PH models.)
• Not effected by materials normally found in
drainage and sewage sumps.
• Stainless steel screws, bolts, handle, guard, and
arm and seal assembly.
• UL Listed 3-wire neoprene cord and plug.
10 ft. cord standard for automatic.
15 ft. cord standard for Nonautomatic.
• Square Ring & Gasket - Neoprene.
• Motor - 266/267/268 Series - ½ HP 60 Hz, 1725
RPM, oil-ﬁlled, hermetically sealed, automatic
reset thermal overload protected (1 PH only).
• Oil lubricated bearings.
• Carbon and ceramic shaft seal.
• Passes 2-inch spherical solids.
• 2” NPT Discharge.
• Model 268 contains combination 2” NPT Female
and 3” NPT Male discharge.
• On point - 12”. Off point - 4” (Automatic units).
• Corrosion resistant powder coated epoxy ﬁnish.

ALL MODELS ARE
COMPLETELY SUBMERSIBLE
HERMETICALLY SEALED

266 - 267 - 268 Series
(For Pump Preﬁx Identiﬁcation see News & Views 0052)

“WASTE-MATE”
SUBMERSIBLE

SEWAGE/*EFFLUENT PUMP
OR DEWATERING PUMP
2” NPT DISCHARGE

UL

**

Automatic
“267”

R

Tested to UL
Standard UL778

**

Certiﬁed to CSA
Standard C22.2 No.108

FEATURES AVAILABLE
•
•
•
•
•
•

Automatic
Nonautomatic (for variable level systems)
2” NPT Discharge (2” & 3” Model 268)
½ HP, 1 Ph, 115V, 200-208V, or 230V
Passes 2” Spherical Solids
BN and BE267 pumps available packaged with a
Piggyback Variable Level Float Switch
• ½ HP, 3 Ph, 200-208V, 230V, or 460V

Automatic
“268”

Watertight - dust tight.
Note: The sizing of efﬂuent systems normally requires variable
level ﬂoat(s) controls and properly sized basins to achieve
required pumping cycles or dosing timers with nonautomatic
pumps.

Manufacturers of . . .

* May be used in those states where codes do not restrict solids size in
efﬂuent systems.
** See back page for UL & CSA listings.

Nonautomatic
“267”
for variable
level systems

© Copyright 2004 Zoeller Co. All rights reserved.

FEET

METERS

TOTAL DYNAMIC HEAD/FLOW
PER MINUTE
SEWAGE AND DEWATERING

PUMP PERFORMANCE CURVE
MODEL 266/267/268

MODEL

266/267/268

Meters
Feet
5
1.5
10
3.0
15
4.6
20
6.1
Shut-off Head:

Liters
Gal.
128
484
89
337
50
189
10
38
21.5 ft.(6.6m)

TOTAL DYNAMIC HEAD

25

20

6

15
4

013225B

10
2
5
SK375

0
20

40

60

80

100

120

140

MODEL

GALLONS
LITERS

0

100

200

300

400

500

FLOW PER MINUTE

A

B

C

D

E

F

G

H

266

4-3/4

8-5/16

6-13/32

4-3/4

6-15/32

2” NPT

14-1/32

6-3/32

267

4-3/4

8-5/16

6-13/32

4-3/4

6-15/32

2” NPT

14-9/32

6-11/32

268

4-3/4

8-13/32

6-13/32

4-3/4

6-15/32

2”/3” NPT

14-1/32

8-13/32

013225A

CONSULT FACTORY FOR SPECIAL APPLICATIONS
Model
M266
** BN266
N266
D266
E266
** BE266
* H266
* I266
* J266
* F266
* G266

Model
M267

** BN267

**
*
*
*
*
*

N267
D267
E267
BE267
H267
I267
J267
F267
G267

Model
M268
** BN268
N268
D268
E268
** BE268
* H268
* I268
* J268
* F268
* G268

266 MODELS
Volts-Ph
115
115
115
230
230
230
200-208
200-208
200-208
230
460

1
1
1
1
1
1
1
1
3
3
3

267 MODELS
Volts-Ph
115
115
115
230
230
230
200-208
200-208
200-208
230
460

1
1
1
1
1
1
1
1
3
3
3

268 MODELS
Volts-Ph
115
115
115
230
230
230
200-208
200-208
200-208
230
460

*No molded plug

1
1
1
1
1
1
1
1
3
3
3

Mode

Amps

Auto
Auto
Non
Auto
Non
Auto
Auto
Non
Non
Non
Non

10.4
10.4
10.4
5.5
5.5
5.5
6.2
6.2
2.6
2.6
1.5

Mode

Amps

Auto
Auto
Non
Auto
Non
Auto
Auto
Non
Non
Non
Non

10.4
10.4
10.4
5.5
5.5
5.5
6.2
6.2
2.6
2.6
1.5

Mode

Amps

Auto
Auto
Non
Auto
Non
Auto
Auto
Non
Non
Non
Non

10.4
10.4
10.4
5.5
5.5
5.5
6.2
6.2
2.6
2.6
1.5

**Single piggyback switch included

Control Selection
Simplex
Duplex
1
**
2 or 3
1
2 or 3
**
1
3
3
3
3

4
4
2 or 4
--4
----4
4
4
4

Control Selection
Simplex
Duplex
1
**
2 or 3
1
2 or 3
**
1
3
3
3
3

4
4
2 or 4
--4
----4
4
4
4

Control Selection
Simplex
Duplex
1
**
2 or 3
1
2 or 3
**
1
3
3
3
3

4
4
2 or 4
--4
----4
4
4
4

Listings
CSA UL
Y
Y
Y
Y
Y
Y
N
N
N
N
N

Y
Y
Y
Y
Y
Y
N
N
Y
Y
N

Listings
CSA UL
Y
Y
Y
Y
Y
Y
N
N
N
N
N

Y
Y
Y
Y
Y
Y
N
N
Y
Y
N

Listings
CSA UL
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N

Y
Y
Y
Y
Y
Y
N
N
Y
Y
N

• Minimum recommended basin size (Small load applications)
Simplex - 18” x 30”.
Duplex - 30” x 36”.
• High water alarms available.
Standard All Models 266 - Weight 41 lbs. ½ HP.
267 - Weight 47.5 lbs. ½ HP.
268 - Weight 51 lbs. ½ HP.
Caution: Maximum temperature of sewage or dewatering must be limited to
130°F (54°C). For over 130°F (54°C) special quotation required.
• For “M” and “D” models, the approximate gallons pumped out per cycle
are:
Tank Diameter
Gallons Pumped
18” Simplex
8 Gallons
24” Simplex
15 Gallons
30” Duplex
22 Gallons
36” Duplex
33 Gallons
48” Duplex
60 Gallons

SELECTION GUIDE
1. Integral ﬂoat operated mechanical switch, no external control required.
2. For automatic use single piggyback variable level ﬂoat switch or double
piggyback variable level ﬂoat switch. Refer to FM0477.
3. See FM1228 for correct model of simplex control panel.
4. See FM0712 for correct model of duplex control panel or FM1663 for a
residential alternator system.

For information on additional Zoeller products refer to catalog on SImplex Panels, FM1596; Piggyback
Variable Level Switches, FM0477; Electrical Alternator, FM0486; Mechanical Alternator, FM0495;
Sump/Sewage Basins, FM0487; Single Phase Alarm Systems, FM0732; Watertight Junctions Boxes,
FM1597; and Disconnect & Rail Systems, FM0787.

All installation of controls, protection devices and wiring should be done by a qualiﬁed licensed
electrician. All electrical and safety codes should be followed including the most recent National
Electric Code (NEC) and the Occupational Safety and Health Act (OSHA).

RESERVE POWERED DESIGN
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.
© Copyright 2004 Zoeller Co. All rights reserved.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Author                          : mikem
Create Date                     : 2004:08:13 15:25:05Z
Modify Date                     : 2013:06:10 08:11:52-04:00
Subject                         : FM0390
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Metadata Date                   : 2013:06:10 08:11:52-04:00
Format                          : application/pdf
Title                           : fm0390-266/267/268 Catalog Sheet
Description                     : FM0390
Creator                         : mikem
Document ID                     : uuid:f3930c65-3028-4293-ad2c-4a6b48013b18
Instance ID                     : uuid:0b816c77-f4db-4c9c-9871-230d4856904e
Page Count                      : 2

EXIF Metadata provided by EXIF.tools

3955 1 Zoeller 267 0057 Brochure Fm0390 266/267/268 Catalog Sheet User Manual

Navigation menu

Versions of this User Manual:

Views

Navigation