534520 1 Barnes Se Series Submittal Sec 3a User Manual

534521 1 Barnes Se Series Submittal 534521_1_Barnes SE Series Submittal

534522 1 Barnes Se Series Submittal 534522_1_Barnes SE Series Submittal

534519 1 Barnes Se Series Submittal 534519_1_Barnes SE Series Submittal 534519_1_Barnes SE Series Submittal pdf pumpproducts

User Manual: Pump 534520 1 Barnes Se Series Submittal

Open the PDF directly: View PDF PDF.
Page Count: 3

www.cranepumps.com
SECTION
PAGE
DATE
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598
A Crane Co. Company
Submersible Effl uent Pumps
31
3A
Series SE
2" Spherical Solids Handling
Manual & Automatic
6/10
Series: SE (SE411 & SE421)
.4HP
, 1750RPM, 60Hz
DESCRIPTION:
PUMP IS DESIGNED FOR HANDLING SEWAGE
EFFLUENT IN TYPICAL SEPTIC TANK/EFFLUENT
APPLICATIONS.
Specifi cations:
DISCHARGE
........................2” NPT, Female, Vertical
LIQUID TEMPERATURE ..... SE411: 77°F (25°C) Continuous
SE421: 104°F (40°C) Continuous
VOLUTE ...............................Cast Iron ASTM A-48, Class 30
MOTOR HOUSING ..............Cast Iron ASTM A-48, Class 30
SEAL PLATE ......................Cast Iron ASTM A-48, Class 30
IMPELLER: Design .............2 Vane, Open with pump out vanes on back
side Dynamically Balanced, ISO G6.3
Material ..........Cast Iron ASTM A-48, Class 30
SHAFT ................................416 Stainless Steel
SQUARE RINGS .................Buna-N
HARDWARE ........................ 300 Series Stainless Steel
PAINT ...................................Air Dry Enamel
SEAL: Design ............Single Mechanical, Oil Filled Reservoir,
Secondary Exclusion Seal
Material ........... Carbon/Ceramic/Buna-N
Hardware - 300 Series Stainless
CORD ENTRY ......................15 ft. (5m) Quick Disconnect Cord with plug
On 115 Volt, Pressure Gromment for sealing
and strain relief
UPPER BEARING ................Single Row, Ball, Oil Lubricated
LOWER BEARING ...............Single Row, Ball, Oil Lubricated
MOTOR: Design ............NEMA L Torque Curve, Oil Filled, Squirrel Cage
Induction
Insulation ........ Class B
SINGLE PHASE ...................Permanent Split Capacitor (PSC)
Includes Overload Protection in Motor
LEVEL CONTROL ............... "A" - Wide Angle, PVC, Mechanical, 15 ft (5m)
cord with Piggy-Back Plug, N/O
"AU"- Wide Angle, Polypropylene,
Mechanical, N/O Integral to pump. ON and
OFF Points are adjustable
"VF" - Vertical Float, PVC, Snap Action,
15 ft (5m) cord, with Piggy-Back plug.
OFF point ONLY is adjustable
OPTIONAL EQUIPMENT .....Seal Material, Additional Cord
RECOMMENDED:
Accessories .............Break Away Fitting (BAF)
Check Valve
Control Panel
Seal Kit PN .............085202
Service Kit PN ..........085201
CSA 108
UL 778
LR16567
C US
I&O Manual
www.cranepumps.com
SECTION
PAGE
DATE
Submersible Effl uent Pumps
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598
A Crane Co. Company
32
3A
6/13
Series SE
2" Spherical Solids Handling
Manual & Automatic
MODEL NO PART NO HP VOLT PH/Hz RPM
(Nom)
NEMA
START
CODE
FULL
LOAD
AMPS
LOCKED
ROTOR
AMPS
CORD
SIZE
CORD
TYPE
CORD
O.D
inch (mm)
SE411 096747 0.4 115 1 / 60 1750 C 12.0 19.0 14/3 SJTOW 0.375 (9.5)
SE411A 096748 0.4 115 1 / 60 1750 C 12.0 19.0 14/3 SJTOW 0.375 (9.5)
SE411AU 096749 0.4 115 1 / 60 1750 C 12.0 19.0 14/3 SJTOW 0.375 (9.5)
SE411VF 100836 0.4 115 1 / 60 1750 C 12.0 19.0 14/3 SJTOW 0.375 (9.5)
SE421 096750 0.4 230 1 / 60 1750 C 6.2 13.0 14/3 SJTOW 0.375 (9.5)
SE421AU 096751 0.4 230 1 / 60 1750 C 6.2 13.0 14/3 SJTOW 0.375 (9.5)
Mechanical Switch on SE-A, cord 16/2, SJOW, Piggy-Back Plug
Mechanical Switch on SE-AU, cord 14/2, SJOW, 0.370 (9.4mm) O.D.
Vertical Switch on SE-VF, cord 16/2, SJOW, 0.320 (8.1mm) O.D. Piggy-Back Plug
IMPORTANT !
1.) PUMP MAY BE OPERATED “DRY” FOR EXTENDED PERIODS WITHOUT DAMAGE TO MOTOR AND/OR SEALS.
2.) THIS PUMP IS NOT APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS I DIVISION I HAZARDOUS LOCATIONS.
3.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE
WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN
SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE.
inches
(mm)
SE411VF SE411 & SE421 (Less Float)
SE411A
SE411AU, SE421AU
I&O Manual
Submersible Effl uent Pumps
SECTION
PAGE
DATE
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598
A Crane Co. Company
33
3A
www.cranepumps.com
Series SE
Performance Curve
.4HP, 1750RPM, 60Hz
6/04
Testing is performed with water, specifi c gravity 1.0 @ 68º F @ (20ºC), other fluids may vary perfor-
mance
inches
(mm)
I&O Manual

Navigation menu