534520 1 Barnes Se Series Submittal Sec 3a User Manual

534521 1 Barnes Se Series Submittal 534521_1_Barnes SE Series Submittal

534522 1 Barnes Se Series Submittal 534522_1_Barnes SE Series Submittal

534519 1 Barnes Se Series Submittal 534519_1_Barnes SE Series Submittal 534519_1_Barnes SE Series Submittal pdf pumpproducts

User Manual: Pump 534520 1 Barnes Se Series Submittal

Open the PDF directly: View PDF .
Page Count: 3

Download
Open PDF In Browser	View PDF

Series SE
2" Spherical Solids Handling
Manual & Automatic

www.cranepumps.com

Submersible Effluent Pumps

I&O Manual

Specifications:
DISCHARGE ........................ 2” NPT, Female, Vertical
LIQUID TEMPERATURE ..... SE411: 77°F (25°C) Continuous
SE421: 104°F (40°C) Continuous
VOLUTE ............................... Cast Iron ASTM A-48, Class 30
MOTOR HOUSING .............. Cast Iron ASTM A-48, Class 30
SEAL PLATE ...................... Cast Iron ASTM A-48, Class 30
IMPELLER: Design ............. 2 Vane, Open with pump out vanes on back
side Dynamically Balanced, ISO G6.3
Material .......... Cast Iron ASTM A-48, Class 30
SHAFT ................................ 416 Stainless Steel
SQUARE RINGS ................. Buna-N
HARDWARE ........................ 300 Series Stainless Steel
PAINT ................................... Air Dry Enamel
SEAL:
Design ............Single Mechanical, Oil Filled Reservoir,
Secondary Exclusion Seal
Material ........... Carbon/Ceramic/Buna-N
Hardware - 300 Series Stainless
CORD ENTRY ...................... 15 ft. (5m) Quick Disconnect Cord with plug
On 115 Volt, Pressure Gromment for sealing
and strain relief
UPPER BEARING................ Single Row, Ball, Oil Lubricated
LOWER BEARING............... Single Row, Ball, Oil Lubricated
MOTOR:
Design ............ NEMA L Torque Curve, Oil Filled, Squirrel Cage
Induction
Insulation ........ Class B
SINGLE PHASE ................... Permanent Split Capacitor (PSC)
Includes Overload Protection in Motor
LEVEL CONTROL ............... "A" - Wide Angle, PVC, Mechanical, 15 ft (5m)
cord with Piggy-Back Plug, N/O
"AU"- Wide Angle, Polypropylene,
Mechanical, N/O Integral to pump. ON and
OFF Points are adjustable
"VF" - Vertical Float, PVC, Snap Action,
15 ft (5m) cord, with Piggy-Back plug.
OFF point ONLY is adjustable
OPTIONAL EQUIPMENT .....Seal Material, Additional Cord

RECOMMENDED:
Accessories .............Break Away Fitting (BAF)
Check Valve
Control Panel
Seal Kit PN .............085202
Service Kit PN..........085201

Series: SE (SE411 & SE421)
.4HP, 1750RPM, 60Hz

C

US
CSA 108
UL 778
LR16567

DESCRIPTION:
PUMP IS DESIGNED FOR HANDLING SEWAGE
EFFLUENT IN TYPICAL SEPTIC TANK/EFFLUENT
APPLICATIONS.

SECTION 3A
31
PAGE
6/10
DATE

A Crane Co. Company

USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598

Series SE
2" Spherical Solids Handling
Manual & Automatic

www.cranepumps.com

Submersible Effluent Pumps
SE411 & SE421 (Less Float)
SE411A

SE411VF

MODEL NO

SE411

I&O Manual

SE411AU, SE421AU

inches
(mm)

PART NO

HP

VOLT

PH/Hz

RPM
(Nom)

NEMA
START
CODE

FULL
LOAD
AMPS

LOCKED
ROTOR
AMPS

CORD
SIZE

CORD
TYPE

CORD
O.D
inch (mm)

096747

0.4

115

1 / 60

1750

C

12.0

19.0

14/3

SJTOW

0.375 (9.5)

SE411A

096748

0.4

115

1 / 60

1750

C

12.0

19.0

14/3

SJTOW

0.375 (9.5)

SE411AU

096749

0.4

115

1 / 60

1750

C

12.0

19.0

14/3

SJTOW

0.375 (9.5)

SE411VF

100836

0.4

115

1 / 60

1750

C

12.0

19.0

14/3

SJTOW

0.375 (9.5)

SE421

096750

0.4

230

1 / 60

1750

C

6.2

13.0

14/3

SJTOW

0.375 (9.5)

SE421AU

096751

0.4

230

1 / 60

1750

C

6.2

13.0

14/3

SJTOW

0.375 (9.5)

Mechanical Switch on SE-A, cord 16/2, SJOW, Piggy-Back Plug
Mechanical Switch on SE-AU, cord 14/2, SJOW, 0.370 (9.4mm) O.D.
Vertical Switch on SE-VF, cord 16/2, SJOW, 0.320 (8.1mm) O.D. Piggy-Back Plug

IMPORTANT !
1.) PUMP MAY BE OPERATED “DRY” FOR EXTENDED PERIODS WITHOUT DAMAGE TO MOTOR AND/OR SEALS.
2.) THIS PUMP IS NOT APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS I DIVISION I HAZARDOUS LOCATIONS.
3.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE
WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN
SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE.

SECTION 3A
32
PAGE
6/13
DATE

A Crane Co. Company

USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598

Series SE
www.cranepumps.com
I&O Manual

Performance Curve
.4HP, 1750RPM, 60Hz
Submersible Effluent Pumps
inches
(mm)

Testing is performed with water, specific gravity 1.0 @ 68º F @ (20ºC), other fluids may vary performance

SECTION 3A
33
PAGE
DATE
6/04

A Crane Co. Company

USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : JTHOMPSON
Create Date                     : 2010:06:28 11:06:34-04:00
Modify Date                     : 2013:06:25 14:40:32-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:06:25 14:40:32-04:00
Format                          : application/pdf
Title                           : sec-3a.indd
Creator                         : JTHOMPSON
Document ID                     : uuid:294cfd61-659b-45ca-886f-a0381ee6a988
Instance ID                     : uuid:00fa4cea-43d6-4878-90f1-6a20bf726fe5
Page Count                      : 3

EXIF Metadata provided by EXIF.tools