534962 1 Well X Trol Asme Brochure 9017 115 MC10008 08_09 WXT User Manual
User Manual: Pump 534962 1 Well-X-Trol Asme Brochure
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
WELL-X-TROL® ASME WATER SYSTEM TANKS ASME Water Tanks for Commercial & Industrial Applications WELL-X-TROL® ASME: The Professionals Choice The AMTROL Advantage Table of Contents The AMTROL® Advantage......................... 2 A Wide Range of Applications.................. 2 WELL-X-TROL® Benefits........................... 2 WELL-X-TROL ASME Commercial/ Industrial Water System Tanks.......... 3 & 4 ® Typical Specifications Water Sytems ASME Vessel..................... 4 • AMTROL - A world-leading provider of advanced water system solutions supplies a complete line of qualityengineered, cost efficient, heating and water systems that you can count on. • ISO 9001-2000 Certified. • With over 50 years experience, AMTROL sets the standard for service, reliability, innovation, design and manufacture of water system equipment. • Fully qualified technical staff available to help ensure solid solutions for your water and heating needs. A Wide Range of Applications WELL-X-TROL® ASME water tanks continue to set industry standards for quality and reliability and have been performance-proven in a variety of applications ranging from municipal well systems or pressure boosting stations to sprinkler systems at your local golf course. A few examples are listed below: • In a municipal well system or pressure boosting station, WELL-XTROL®s are used to control sequential start of the main pumps. At the same time, it reduces surge and provides the jockey pump with guaranteed minimum run times during the peak demand periods. • High-pressure booster applications in high-rise buildings, irrigation systems and community wells are ideally suited for the WELL-X-TROL® 400 Series. The 450 Series can be used on pressure regulation stations to provide dampening during periodic high peak loading. • Many times, two model WELL-X-TROL®s can be used together on the same system. For example, on a golf course sprinkler system, a larger 450 Series protects and assures proper pump operation while a smaller 400 Series protects “dead end” lines from hammer and surge. AMTROL ASME WELL-X-TROL® Benefits.... • Pump protection - Reduces surge - Dampens pressure spikes - Offers a point of pressure control - Provides minimum run-time • Provides rapid system response and adequate protection at the end of long pipe runs. • *Controls system shock and pressure fluctuations when your system utilizes: - Back flow preventors - Check valves - Solenoid - Mixing and meter valves - Pumps and other system controls *Caution: Do not use for shock with flow velocities greater than 10 FPS (3.04 MPS). 2 WELL-X-TROL® ASME Commercial/Industrial Water System Tanks Features • Designed, constructed and tested per ASME Code Section VIII, Division 1 standards. • Most robust heavy-duty butyl bladder with 0.100˝ (2.54 mm) minimum thickness (WX-440-C/WX-450-C Series). Superior Performance with AMTROL’s Heavy-Duty Butyl Bladder • Replaceable bladder design (WX-440-C/WX-450-C Series). Bladder Cross-Section Comparison • Diaphragm and bladder NSF/ANSI 61 approved. • Pre-pressurized, sealed-in air charge. • Corrosion resistant virgin polypropylene liner (WX-400-C Series). Maximum Operating Conditions Working Pressure: 125 150 175 250 Operating Temperature: psig psig psig psig (8.8 bar) (10.5 bar) (12.3 bar) (17.6 bar) AMTROL Brand “X” Brand “Y” THICKER IS BETTER! WX-400-C Series 200°F (93°C) WX-440-C/450-C Series 240°F (115°C) Materials of Construction Description WX-400-C Series Standard Construction WX-440-C/WX-450-C Series Standard Construction Shell Steel Steel Diaphragm Heavy-Duty Butyl/EPDM NSF/ANSI 61 - Bladder - Heavy-Duty Butyl NSF/ANSI 61 Liner Polypropylene - Coating Red Oxide Primer Red Oxide Primer System Connection Malleable Iron (NPT) Malleable Iron (NPTF) CHARGING VALVE WX-400-C Series (ASME) B Model No. Code approvals A D C E Tank Vol. Lit. Gal Max. Accept. Lit. Gal A Height mm ins. B Diameter mm ins. C Conn. mm ins. D Inset mm ins. E Sys. Stand Conn. mm ins. ins. WX-401-C 68 18 42.75 111⁄4 794 311⁄4 413 161⁄4 124 47⁄8 38 11⁄2 324 123⁄4 1 WX-402-C 95 25 42.75 111⁄4 1010 391⁄4 413 161⁄4 124 47⁄8 38 11⁄2 324 123⁄4 1 WX-403-C 129 34 42.75 111⁄4 1251 491⁄4 413 161⁄4 124 47⁄8 38 11⁄2 324 123⁄4 1 WX-404-C 258 68 129.20 34 1209 475⁄8 610 24 159 61⁄4 41 15⁄8 406 16 11⁄4 WX-405-C 341 90 129.20 34 1505 591⁄4 610 24 159 61⁄4 41 15⁄8 406 16 11⁄4 WX-406-C 417 110 129.20 34 1778 70 610 24 159 61⁄4 41 15⁄8 406 16 11⁄4 WX-407-C 500 132 174.80 46 1470 577⁄8 762 30 254 10 44 13⁄4 610 24 11⁄4 All dimensions are approximate. 3 WELL-X-TROL® ASME Commercial/Industrial Water System Tanks WX-440-C/460-C Series (ASME) 125 PSIG Working Pressure Tank 0 PSIG Max. Recomm. A B Sys. C D E Vol. Acc. Vol. Acc.Vol. Height Diameter Conn. Conn. Conn. Stand Model Inset Ctr.Line Dia. No. Lit. Gal Gal Lit. Gal mm ins. mm ins. ins. ins. ins. ins. WX-447-C WX-448-C WX-449-C WX-450-C WX-451-C WX-452-C WX-453-C WX-454-C WX-455-C WX-456-C WX-457-C WX-458-C WX-459-C WX-460-C WX-461-C WX-462-C WX-463-C 200 53 300 80 400 106 500 132 600 158 800 211 1000 264 1200 317 1400 370 1600 422 2000 528 2498 660 2998 792 3501 925 3997 1056 4996 1320 7494 1980 53 80 106 132 158 211 264 317 370 422 528 660 792 925 1056 1320 1980 129 197 261 322 386 519 647 780 908 1037 1298 1624 1949 2275 2596 3247 4871 34 52 69 85 102 137 171 206 240 274 343 429 515 601 686 858 1287 Maximum Operating Conditions Operating Temperature Working Pressure 240° F (115° C) 125 PSIG (8.8 bar) Specifications Description Shell Bladder Bladder Thickness System Connection Coating Factory Precharge Standard Construction Steel Heavy Duty Butyl NSF/ANSI 61 .100 Ins. Minimum Malleable Iron (NPTF) Red Oxide Primer 25 PSIG (1.8 bar) Constructed per ASME Code Section VIII, Division 1. All dimensions and weights are approximate. • For higher pressures please contact factory. • Note: Allow 18” (460mm) minimum clearance. • All dimensions are approximate. 4 1150 1502 1857 2200 1867 2312 2184 2489 2804 2080 2470 2134 2438 2718 2972 2743 3556 45 /4 591/8 731/8 865/8 731/4 91 86 98 1103/8 817/8 971/4 84 96 107 117 108 140 1 610 610 610 610 762 762 914 914 914 1220 1220 1524 1524 1524 1524 1829 1829 24 24 24 24 30 30 36 36 36 48 48 60 60 60 60 72 72 2 2 2 2 2 2 3 3 3 3 3 4 4 4 4 4 4 2 2 2 2 31/2 31/2 41/2 41/2 41/2 71/2 71/2 8 8 8 8 8 8 3 /4 33/4 33/4 33/4 51/2 51/2 7 7 7 71/8 71/8 6 6 6 6 6 6 3 19 19 19 19 24 24 30 30 30 42 42 54 54 54 54 60 60 Ship Wt. kg lbs. 120 143 145 159 224 273 307 346 382 523 604 658 984 1043 1197 1588 1860 263 315 319 351 493 602 676 762 843 1154 1331 1450 2169 2300 2638 3500 4100 WELL-X-TROL® ASME Commercial/Industrial Water System Tanks Well-X-Trol Bottom Connection Bladder Series The WELL-X-TROL WX Series vessels incorporate seamless bladder construction and contoured bladder design that ensures repeatable and predictable long-life expectancy. The WX partial acceptance bladder is designed to gently unfold to accept expansion fluids without stretching the bladder and causing undo stress. Made of heavyduty butyl material they are designed and built to provide reliability, durability, and dependability you can count on. • Designed and constructed per ASME Section VIII, Division 1 standards • Replaceable bladder design • Stainless Steel system connection • Available with optional seismic restraints and site glass Maximum Operating Conditions Maximum Working Pressure: 125 psig (8.8 bar) Operating Temperature: 240°F (115°C) *Model Tank Accept A B Sys. Ship No. Volume Volume Height Diameter Conn.1 Weight WX-35-CL(L) Lit. Gal. Lit. Gal. mm ins. mm ins. mm ins. 35 10 35 10 948 371⁄16 254 10 32 11⁄4 32 69 305 12 32 11⁄4 35 76 406 16 32 11⁄4 42 92 406 16 32 11⁄4 45 98 20 38 11⁄2 62 136 11⁄2 WX-50-CL(L) 50 13 40 11 941 371⁄16 WX-85-CL(L) 85 22 40 11 872 345⁄16 39 kg lbs. WX-100-CL(L) 100 26 40 11 991 WX-130-CL(L) 130 34 100 27 881 3411⁄16 508 508 20 38 67 146 610 24 38 11⁄2 91 198 11⁄2 WX-165-CL(L) 165 44 100 27 1008 3911⁄16 WX-200-CL(L) 200 53 100 27 1039 407⁄8 WX-300-CL(L) 300 80 100 27 1423 56 610 24 38 WX-400-CL(L) 400 106 200 53 1743 685⁄8 610 24 50 2 129 282 610 24 50 2 144 316 762 30 50 2 206 450 WX-500-CL(L) 500 132 200 53 2096 821⁄2 WX-600-CL(L) 600 158 200 53 1702 67 108 236 System connection is NPTF 1 All dimensions and weights are approximate. *Model No.: “CL” in code indicates ASME vessel. “L” in code indicates Non-ASME vessel. 5 WELL-X-TROL® ASME Commercial/Industrial Water System Tanks “Typical Specification Water Systems ASME Vessels” WX-400–C Series (Diaphragm type) & WX-440-C/WX-450-C (Bladder type) The water system shall include a WELL-X-TROL®‚ diaphragm type/ bladder type pre-pressurized storage tank Model No. WX -______ -C. Dimensions shall be as indicated on the drawings. The storage tank shall be welded steel, constructed, tested and stamped in accordance with Section VIII, Division 1 of the ASME Code for a working pressure of (125 psig/8.8 bar) (150 psig/10.5 bar) (175 psig/12.3 bar) (250 psig/17.6 bar) (________) and air pre-charged. Use following paragraph for diaphragm type tank: Each tank will have a heavy-duty butyl/EPDM diaphragm with code approvals NSF/ANSI 61. Each tank shall have a polypropylene liner. Use following paragraph for bladder type tank: Each tank will have a heavy-duty butyl bladder with code approvals NSF/ANSI 61. The bladder shall have a minimum thickness of 0.100 inches (2.54mm). The tank shall be supported by steel legs or a base (integral ring mount) for a vertical installation. The vessel(s) shall be painted with one shop coat of red oxide primer. The manufacturer shall be AMTROL Inc. The manufacturer shall have at least five years experience in the fabrication of diaphragm/bladder type ASME tanks. *Refer to installation manual for warranty information or visit our website at www.amtrol.com Corporate Headquarters 1400 Division Road, West Warwick, RI 02893 Telephone: 401-884-6300 • Fax: 401-884-5276 AMTROL Canada, Ltd. w w w . a m t r o l . c o m 275 Shoemaker Street, Kitchener, Ontario N2E 3B3 Telephone: 519-748-1138 • Fax: 519-748-4231 The AMTROL logo, AMTROL, and WELL-X-TROL® are registered trademarks of AMTROL Inc. and its affiliates in the U.S. and elsewhere. All rights reserved. In the interest of continuous development, AMTROL Inc. and its subsidiaries reserve the right to alter designs and specifications without prior notice. Part #9017-115 MC#10008 (08/09) ©2009 AMTROL Inc. Printed in USA 6
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:30 Instance ID : uuid:cf00df1a-1d6c-4c59-ae8c-750dc9660c60 Document ID : adobe:docid:indd:130c0ece-7daf-11de-85c3-c856e62bcfb6 Rendition Class : proof:pdf Derived From Instance ID : 130c0ecd-7daf-11de-85c3-c856e62bcfb6 Derived From Document ID : adobe:docid:indd:130c0ecc-7daf-11de-85c3-c856e62bcfb6 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:2D87C72B422D11DE89E0BA1C18AFB838, uuid:1f1353c9-d581-11d8-9845-c3ac0d4764be, uuid:12fedb0f-c464-11d8-b639-000a95dee8c6, uuid:5969bbf6-a517-11d8-8907-000a95ba505a, uuid:639e684f-a517-11d8-8907-000a95ba505a, uuid:5511f639-6923-11d8-81b6-c16b0f556141, uuid:01416851-b492-11d8-aa2a-000a95ba505a, uuid:12fedb0f-c464-11d8-b639-000a95dee8c6, uuid:454e4d70-6923-11d8-81b6-c16b0f556141, uuid:15ec2ae4-9d39-11d8-bdb7-000a95ba505a, uuid:9F2B0E24C60C11DEA6DAAC20F7816BAB, uuid:96616124-46b1-11d8-917b-000a95ba505a Manifest Reference Document ID : uuid:2D87C72A422D11DE89E0BA1C18AFB838, adobe:docid:photoshop:1f1353c8-d581-11d8-9845-c3ac0d4764be, uuid:5a287008-7384-11d8-89a0-000a95ba505a, uuid:6e792fe4-a516-11d8-bf6d-000a95ba505a, uuid:973deeb0-a516-11d8-bf6d-000a95ba505a, adobe:docid:photoshop:5511f638-6923-11d8-81b6-c16b0f556141, uuid:c6a829d8-78ee-11d8-8d72-000a95ba505a, uuid:5a287008-7384-11d8-89a0-000a95ba505a, adobe:docid:photoshop:454e4d6f-6923-11d8-81b6-c16b0f556141, uuid:4f271db6-84c1-11d8-b996-000a95ba505a, uuid:9F2B0E23C60C11DEA6DAAC20F7816BAB, uuid:142eb5e4-469f-11d8-9b19-000a95ba505a Create Date : 2009:10:29 14:35:55-04:00 Modify Date : 2009:10:29 15:37:42-04:00 Metadata Date : 2009:10:29 15:37:42-04:00 Creator Tool : Adobe InDesign CS3 (5.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 9216 bytes, use -b option to extract) Format : application/pdf Title : 9017-115 MC10008 08_09 WXT ASME.indd Producer : Adobe PDF Library 8.0 Trapped : False GTS PDFX Version : PDF/X-1:2001 GTS PDFX Conformance : PDF/X-1a:2001 Page Count : 6 Creator : Adobe InDesign CS3 (5.0.4)EXIF Metadata provided by EXIF.tools