534962 1 Well X Trol Asme Brochure 9017 115 MC10008 08_09 WXT User Manual

User Manual: Pump 534962 1 Well-X-Trol Asme Brochure

Open the PDF directly: View PDF .
Page Count: 6

WELL-X-TROL® ASME

WATER SYSTEM TANKS

ASME Water Tanks for

Commercial & Industrial

Applications

The AMTROL® Advantage ........................ 2

A Wide Range of Applications ................. 2

WELL-X-TROL® Benefits .......................... 2

WELL-X-TROL® ASME Commercial/

Industrial Water System Tanks.......... 3 & 4

Typical Specifications

Water Sytems ASME Vessel .................... 4

Table of Contents

WELL-X-TROL® ASME: The Professionals Choice

The AMTROL Advantage

• AMTROL

-

A world-leading provider of advanced water

system solutions supplies a complete line of quality-

engineered, cost efficient, heating and water systems

that you can count on.

• ISO 9001-2000 Certified.

• With over 50 years experience, AMTROL sets the

standard for service, reliability, innovation, design and

manufacture of water system equipment.

• Fully qualified technical staff available to help ensure solid

solutions for your water and heating needs.

A Wide Range of Applications

WELL-X-TROL® ASME water tanks continue to set industry standards for quality and reliability and have been

performance-proven in a variety of applications ranging from municipal well systems or pressure boosting stations to

sprinkler systems at your local golf course. A few examples are listed below:

• In a municipal well system or pressure boosting station, WELL-X-

TROL®s are used to control sequential start of the main pumps. At

the same time, it reduces surge and provides the jockey pump with

guaranteed minimum run times during the peak demand periods.

• High-pressure booster applications in high-rise buildings, irrigation

systems and community wells are ideally suited for the WELL-X-TROL®

400 Series. The 450 Series can be used on pressure regulation stations

to provide dampening during periodic high peak loading.

• Many times, two model WELL-X-TROL®s can be used together on

the same system. For example, on a golf course sprinkler system, a

larger 450 Series protects and assures proper pump operation while a

smaller 400 Series protects “dead end” lines from hammer and surge.

• Pump protection

- Reduces surge

- Dampens pressure spikes

- Offers a point of pressure control

- Provides minimum run-time

• Provides rapid system response and adequate protection at the

end of long pipe runs.

• *Controls system shock and pressure fluctuations when your

system utilizes:

- Back flow preventors

- Check valves

- Solenoid

- Mixing and meter valves

- Pumps and other system controls

*Caution: Do not use for shock with flow velocities greater than 10 FPS (3.04 MPS).

AMTROL ASME WELL-X-TROL® Benefits....

2

B

A

D

C

CHARGING VA L V E

E

WELL-X-TROL® ASME Commercial/Industrial Water System Tanks

Maximum Operating Conditions

Features

• Designed, constructed and tested per ASME Code Section VIII,

Division 1 standards.

• Most robust heavy-duty butyl bladder with 0.100˝ (2.54 mm)

minimum thickness (WX-440-C/WX-450-C Series).

• Replaceable bladder design (WX-440-C/WX-450-C Series).

• Diaphragm and bladder NSF/ANSI 61 approved.

• Pre-pressurized, sealed-in air charge.

• Corrosion resistant virgin polypropylene liner (WX-400-C Series).

WX-400-C Series (ASME)

Tank Max. A B C D E Sys.

Model Vol. Accept. Height Diameter Conn. Inset Stand Conn.

No. Lit. Gal Lit. Gal mm ins. mm ins. mm ins. mm ins. mm ins. ins.

WX-401-C 68 18 42.75 111

⁄

4 794 311

⁄

4 413 161

⁄

4 124 47

⁄

8 38 11

⁄

2 324 123

⁄

4 1

WX-402-C 95 25 42.75 111

⁄

4 1010 391

⁄

4 413 161

⁄

4 124 47

⁄

8 38 11

⁄

2 324 123

⁄

4 1

WX-403-C 129 34 42.75 111

⁄

4 1251 491

⁄

4 413 161

⁄

4 124 47

⁄

8 38 11

⁄

2 324 123

⁄

4 1

WX-404-C 258 68 129.20 34 1209 475

⁄

8 610 24 159 61

⁄

4 41 15

⁄

8 406 16 11

⁄

4

WX-405-C 341 90 129.20 34 1505 591

⁄

4 610 24 159 61

⁄

4 41 15

⁄

8 406 16 11

⁄

4

WX-406-C 417 110 129.20 34 1778 70 610 24 159 61

⁄

4 41 15

⁄

8 406 16 11

⁄

4

WX-407-C 500 132 174.80 46 1470 577

⁄

8 762 30 254 10 44 13

⁄

4 610 24 11

⁄

4

Code approvals

All dimensions are approximate.

Shell Steel Steel

Diaphragm Heavy-Duty Butyl/EPDM NSF/ANSI 61 -

Bladder - Heavy-Duty Butyl NSF/ANSI 61

Liner Polypropylene -

Coating Red Oxide Primer Red Oxide Primer

System Connection Malleable Iron (NPT) Malleable Iron (NPTF)

WX-400-C Series WX-440-C/WX-450-C Series

Description Standard Construction Standard Construction

Materials of Construction

Working Pressure: 125 psig (8.8 bar)

150 psig (10.5 bar)

175 psig (12.3 bar)

250 psig (17.6 bar)

Operating WX-400-C Series 200°F (93°C)

Temperature: WX-440-C/450-C Series 240°F (115°C)

Superior Performance

with AMTROL’s

Heavy-Duty Butyl Bladder

Bladder Cross-Section Comparison

AMTROL Brand “X” Brand “Y”

THICKER IS BETTER!

3

4

WX-440-C/460-C Series (ASME) 125 PSIG Working Pressure

WELL-X-TROL® ASME Commercial/Industrial Water System Tanks

Operating Temperature 240° F (115° C)

Working Pressure 125 PSIG (8.8 bar)

Tank 0 PSIG Max. Recomm. A B Sys. C D E Ship

Vol. Acc. Vol. Acc.Vol. Height Diameter Conn. Conn. Conn. Stand Wt.

Model Inset Ctr.Line Dia.

No. Lit. Gal Gal Lit. Gal mm ins. mm ins. ins. ins. ins. ins. kg lbs.

WX-447-C 200 53 53 129 34 1150 451/4 610 24 2 2 33/4 19 120 263

WX-448-C 300 80 80 197 52 1502 591/8 610 24 2 2 33/4 19 143 315

WX-449-C 400 106 106 261 69 1857 731/8 610 24 2 2 33/4 19 145 319

WX-450-C 500 132 132 322 85 2200 865/8 610 24 2 2 33/4 19 159 351

WX-451-C 600 158 158 386 102 1867 731/4 762 30 2 31/2 5

1/2 24 224 493

WX-452-C 800 211 211 519 137 2312 91 762 30 2 31/2 5

1/2 24 273 602

WX-453-C 1000 264 264 647 171 2184 86 914 36 3 41/2 7 30 307 676

WX-454-C 1200 317 317 780 206 2489 98 914 36 3 41/2 7 30 346 762

WX-455-C 1400 370 370 908 240 2804 1103/8 914 36 3 41/2 7 30 382 843

WX-456-C 1600 422 422 1037 274 2080 817/8 1220 48 3 71/2 7

1/8 42 523 1154

WX-457-C 2000 528 528 1298 343 2470 971/4 1220 48 3 71/2 7

1/8 42 604 1331

WX-458-C 2498 660 660 1624 429 2134 84 1524 60 4 8 6 54 658 1450

WX-459-C 2998 792 792 1949 515 2438 96 1524 60 4 8 6 54 984 2169

WX-460-C 3501 925 925 2275 601 2718 107 1524 60 4 8 6 54 1043 2300

WX-461-C 3997 1056 1056 2596 686 2972 117 1524 60 4 8 6 54 1197 2638

WX-462-C 4996 1320 1320 3247 858 2743 108 1829 72 4 8 6 60 1588 3500

WX-463-C 7494 1980 1980 4871 1287 3556 140 1829 72 4 8 6 60 1860 4100

Description Standard Construction

Shell Steel

Bladder Heavy Duty Butyl NSF/ANSI 61

Bladder Thickness .100 Ins. Minimum

System Connection Malleable Iron (NPTF)

Coating Red Oxide Primer

Factory Precharge 25 PSIG (1.8 bar)

Specifications

Maximum Operating Conditions

Constructed per ASME Code Section VIII, Division 1.

All dimensions and weights are approximate.

• For higher pressures please contact factory.

• Note: Allow 18” (460mm) minimum clearance.

• All dimensions are approximate.

5

WELL-X-TROL® ASME Commercial/Industrial Water System Tanks

The WELL-X-TROL WX Series vessels incorporate seamless bladder construction and contoured bladder design

that ensures repeatable and predictable long-life expectancy. The WX partial acceptance bladder is designed to

gently unfold to accept expansion fluids without stretching the bladder and causing undo stress. Made of heavy-

duty butyl material they are designed and built to provide reliability, durability, and dependability you can count on.

• Designed and constructed per ASME Section VIII, Division 1 standards

• Replaceable bladder design

• Stainless Steel system connection

• Available with optional seismic restraints and site glass

Well-X-Trol Bottom Connection Bladder Series

Maximum Working Pressure: 125 psig (8.8 bar)

Operating Temperature: 240°F (115°C)

Maximum Operating Conditions

*Model Tank Accept A B Sys. Ship

No. Volume Volume Height Diameter Conn.1 Weight

Lit. Gal. Lit. Gal. mm ins. mm ins. mm ins. kg lbs.

WX-35-CL(L)

35 10 35 10 948 371

⁄

16 254 10 32 11

⁄

4 32 69

WX-50-CL(L)

50 13 40 11 941 371

⁄

16 305 12 32 11

⁄

4 35 76

WX-85-CL(L)

85 22 40 11 872 345

⁄

16 406 16 32 11

⁄

4 42 92

WX-100-CL(L)

100 26 40 11 991 39 406 16 32 11

⁄

4 45 98

WX-130-CL(L)

130 34 100 27 881 3411

⁄

16 508 20 38 11

⁄

2 62 136

WX-165-CL(L)

165 44 100 27 1008 3911

⁄

16 508 20 38 11

⁄

2 67 146

WX-200-CL(L)

200 53 100 27 1039 407

⁄

8 610 24 38 11

⁄

2 91 198

WX-300-CL(L)

300 80 100 27 1423 56 610 24 38 11

⁄

2 108 236

WX-400-CL(L)

400 106 200 53 1743 685

⁄

8 610 24 50 2 129 282

WX-500-CL(L)

500 132 200 53 2096 821

⁄

2 610 24 50 2 144 316

WX-600-CL(L)

600 158 200 53 1702 67 762 30 50 2 206 450

1System connection is NPTF

All dimensions and weights are approximate.

*Model No.: “CL” in code indicates ASME vessel. “L” in code indicates Non-ASME vessel.

WELL-X-TROL® ASME Commercial/Industrial Water System Tanks

“Typical Specification Water Systems ASME Vessels”

WX-400–C Series (Diaphragm type) & WX-440-C/WX-450-C (Bladder type)

The water system shall include a WELL-X-TROL®‚ diaphragm type/

bladder type pre-pressurized storage tank Model No. WX -______ -C.

Dimensions shall be as indicated on the drawings.

The storage tank shall be welded steel, constructed, tested and stamped

in accordance with Section VIII, Division 1 of the ASME Code for a working

pressure of (125 psig/8.8 bar) (150 psig/10.5 bar) (175 psig/12.3 bar)

(250 psig/17.6 bar) (________) and air pre-charged.

Use following paragraph for diaphragm type tank:

Each tank will have a heavy-duty butyl/EPDM diaphragm with code

approvals NSF/ANSI 61. Each tank shall have a polypropylene liner.

Use following paragraph for bladder type tank:

Each tank will have a heavy-duty butyl bladder with code approvals

NSF/ANSI 61. The bladder shall have a minimum thickness of 0.100

inches (2.54mm).

The tank shall be supported by steel legs or a base (integral ring mount) for a

vertical installation. The vessel(s) shall be painted with one shop coat of red

oxide primer.

The manufacturer shall be AMTROL Inc. The manufacturer shall have at least

five years experience in the fabrication of diaphragm/bladder type ASME

tanks.

6

Part #9017-115 MC#10008 (08/09) ©2009 AMTROL Inc.

Printed in USA

*Refer to installation manual for warranty information or visit our website at www.amtrol.com

The AMTROL logo, AMTROL, and WELL-X-TROL® are registered trademarks of AMTROL Inc. and its affiliates in the U.S. and elsewhere. All rights reserved.

In the interest of continuous development, AMTROL Inc. and its subsidiaries reserve the right to alter designs and specifications without prior notice.

Corporate Headquarters

1400 Division Road, West Warwick, RI 02893

Telephone: 401-884-6300 • Fax: 401-884-5276

AMTROL Canada, Ltd.

275 Shoemaker Street, Kitchener, Ontario N2E 3B3

Telephone: 519-748-1138 • Fax: 519-748-4231

www.amtrol.com