537341 3 Grundfos Magna3 Installation And Instructions User Manual

• English (US)
  • 1. Limited warranty
  • 2. Symbols used in this document
  • 3. General information
    • 3.1 Applications
    • 3.2 Pumped liquids
      • 3.2.1 Glycol
    • 3.3 Operating conditions
      • 3.3.1 Liquid temperature
      • 3.3.2 System pressure
      • 3.3.3 Ambient temperature
      • 3.3.4 Sound pressure level
      • 3.3.5 Approvals
    • 3.4 Frost protection
    • 3.5 Insulating shells
    • 3.6 Non-return valve
    • 3.7 Nameplate
    • 3.8 Radio communication
    • 3.9 Tools
  • 4. Mechanical installation
    • 4.1 Installing the pump
    • 4.2 Positioning
    • 4.3 Control box positions
    • 4.4 Changing the control box position
  • 5. Electrical installation
    • 5.1 Supply voltage
    • 5.2 Connection to the power supply
    • 5.3 Connection diagram
    • 5.4 Connection to external controllers
    • 5.5 Input/output communication
      • 5.5.1 Relay outputs
      • 5.5.2 Digital inputs
      • 5.5.3 Analog input
    • 5.6 Priority of settings
  • 6. First start-up
  • 7. Settings
    • 7.1 Overview of settings
  • 8. Menu overview
  • 9. Control panel
  • 10. Menu structure
  • 11. "Home" menu
  • 12. "Status" menu
  • 13. "Settings" menu
    • 13.1 Setpoint
    • 13.2 Operating mode
    • 13.3 Control mode
      • 13.3.1 AUTOADAPT
      • 13.3.2 FLOWADAPT
      • 13.3.3 Proportional pressure
      • 13.3.4 Constant pressure
      • 13.3.5 Constant temperature
      • 13.3.6 Differential temperature
      • 13.3.7 Constant curve
    • 13.4 FLOWLIMIT
    • 13.5 Automatic Night Setback
    • 13.6 Relay outputs
    • 13.7 Setpoint influence
      • 13.7.1 External setpoint function
      • 13.7.2 Temperature influence
    • 13.8 Bus communication
      • 13.8.1 Pump number
    • 13.9 General settings
      • 13.9.1 Language
      • 13.9.2 Set date and time
      • 13.9.3 Units
      • 13.9.4 Enable/disable settings
      • 13.9.5 Delete history
      • 13.9.6 Define Home display
      • 13.9.7 Display brightness
      • 13.9.8 Return to factory settings
      • 13.9.9 Run start-up guide
  • 14. "Assist" menu
    • 14.1 Assisted pump setup
    • 14.2 Setting of date and time
    • 14.3 Multi-pump setup
    • 14.4 Setup, analog input
    • 14.5 Description of control mode
    • 14.6 Assisted fault advice
    • 14.7 Wireless GENIair
    • 14.8 Multi-pump function
      • 14.8.1 Alternating operation
      • 14.8.2 Back-up operation
      • 14.8.3 Cascade operation
  • 15. Selection of control mode
  • 16. Fault finding
    • 16.1 Grundfos Eye operating indications
    • 16.2 Signalling communication with remote control
    • 16.3 Fault finding
  • 17. Sensor
    • 17.1 Sensor specifications
      • 17.1.1 Pressure
      • 17.1.2 Temperature
  • 18. Accessories
    • 18.1 Grundfos GO Remote
    • 18.2 Communication
      • 18.2.1 Reuse of CIM modules
    • 18.3 Fitting the CIM module
  • 19. Technical data
  • 20. Disposal