538313 1 Goulds 4SD Sewage Pump Brochure
: Pump 538313 1 Goulds 4Sd Sewage Pump Brochure 538313_1_Goulds 4SD Sewage Pump Brochure pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
TECHNICAL BROCHURE B4SD R1 4SD SUBMERSIBLE SEWAGE PUMP DUAL SEAL WITH SEAL SENSOR PROBE Wastewater Goulds Water Technology FEATURES Impeller: Cast iron, two vane semi-open, non-clog with pump-out vanes for mechanical seal protection. Balanced for smooth operation. Silicon bronze impeller available as an option. Seal Sensor Probe: Located in oil-filled chamber. If pumpage should begin to leak past lower seal it indicates to pump control panel a fault has occurred. Requires optional Seal Fail Circuit in the control panel. Casing: Heavy duty cast iron, volute type for maximum efficiency. 4" flange conforms to 125 # ANSI standard. Connects to A10-40 or A10-60 guide rail system. Shaft: 300 series stainless steel keyed design. Dual Mechanical Seals: Silicon carbide vs. silicon carbide outer seal and ceramic vs. carbon inner seal, stainless steel metal parts, BUNA-N elastomers. Upper and lower shaft seals are positioned independently and are separated by an oil-filled chamber. Fasteners: 300 series stainless steel. Capable of running dry without damage to components. AGENCY LISTINGS ® C APPLICATIONS Used in a variety of residential, commercial and industrial applications such as: • Sewage systems • Flood and pollution control • Dewatering/Effluent • Farms • Hospitals • Trailer courts • Motels US Tested to UL 778 and CSA 22.2 108 Standards By Canadian Standards Association File #LR38549 Single Phase: • 1.5 - 5 HP • 208 and 230 volts • Built-in thermal overloads with automatic reset • Built-in capacitors Three Phase: • 1.5 - 7.5 HP • 200, 230, 460 and 575 volts • Class 10 overload protection must be provided in control panel SPECIFICATIONS MOTORS Pump: • Maximum solid size: 3” • Discharge size: 4”, 125 # ANSI flange • Maximum capacity: 620 GPM • Maximum total head: 60 feet • 300 Series stainess steel fasteners • 20’ Power cord • Standard silicon carbide/silicon carbide outer seal • Fully submerged in oil-filled chamber. High grade turbine oil surrounds motor for more efficient heat dissipation, permanent lubrication of bearings and mechanical seal for complete protection against outside environment. Motor: • Maximum ambient temperature: 104º F (40º C) continuous duty, 140º F (60º C) intermittent duty • Rated for continuous duty when fully submerged • Insulation: Class F • 60 Hertz • Single row ball bearings • 300 Series stainless steel keyed shaft • Class F insulation • Designed for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits and can be operated continuously without damage when fully submerged. • Bearings: Upper and lower heavy duty ball bearing construction for precision positioning of parts and to carry thrust loads. • Power and Control Cables: Severe duty rated, oil and water resistant. Epoxy seal on motor end provides secondary moisture barrier in case of outer jacket damage and to prevent oil wicking. 20 foot standard with optional lengths available. • O-ring: Assures positive sealing against contaminants and oil leakage. PAGE 2 Goulds Water Technology Wastewater MODEL AND MOTOR INFORMATION Order Number HP 4SD52F8EA 1 4SD52F1EA 4SD52F2EA 4SD52F3EA Phase 1.5 3 4SD52F4EA 4SD52F5EA 4SD52F8DA 1 4SD52F1DA 4SD52F2DA 4SD52F3DA 1.5 3 4SD52F4DA 4SD52F5DA 4SD52G8CA 1 4SD52G1CA 4SD52G2CA 4SD52G3CA 2 3 4SD52G4CA 4SD52G5CA 4SD52H8BA 1 4SD52H1BA 4SD52H2BA 4SD52H3BA 3 4SD52H5BA 4SD52J1AA 1 4SD52J2AA 4SD52J3AA 5 4SD52J4AA RPM Impeller Dia. (In.) 3 Maximum Amps Code Locked KVA Power F.L. Motor Rotor Code Cable Efficiency % Amps 1.8 E 200 11.5 40.9 H 81 10.0 40.0 F 83 460 5.0 20.0 F 575 4.0 14.4 H 208 17.2 50.8 B 230 14.7 29.5 E 200 11.5 40.9 H 81 10.0 40.0 F 83 460 5.0 20.0 F 575 4.0 14.4 H 208 20.3 50.8 B 230 17.3 36.9 D 200 13.3 40.9 H 81 11.6 40.0 F 83 5.63 230 6.25 230 230 460 6.63 E D C 1750 5.8 20.0 F 575 4.6 14.4 H 208 25.5 50.8 B 230 21.5 46.4 C 16.6 53.8 G 14.4 49.5 H 7.2 24.8 H 575 5.8 17.3 G 230 26.5 57.7 A 200 19.1 73.9 F 16.6 63.6 E 8.3 31.8 E 230 7.00 B 460 230 7.25 A 460 6.6 22.8 E 230 23.0 105.0 G 11.5 52.5 G 9.2 42.0 E 4SD52K5FA 0.9 1.4 B 29.5 575 3 1.1 70 50.8 14.7 4SD52K3FA 7.5 80 17.2 4SD52J5AA 4SD52K4FA Line-Line 230 460 7.69 575 F 14/3 14/4 Resistance Start 208 200 3 4SD52H4BA Volts 83 1.7 NA 74 14/3 14/4 14/4 1.1 0.9 70 1.4 1.8 1.7 NA 10/4 1.1 0.9 75 1.4 1.5 83 1.7 NA 10/4 14/4 1.1 0.9 1.0 1.0 85 NA 85 7.5 205 0.8 213 0.9 NA 80 83 1.9 11.6 1.0 84 85 208 1.3 1.2 4.8 210 7.4 83 10/4 9.3 79 80 200 14.8 78 10/3 2.3 80 83 195 9.3 80 83 14/4 2.3 14.8 74 10/3 9.3 80 83 195 14.8 74 14/3 2.3 Weight (lbs.) 0.7 NA 84 2.8 225 4.4 NOMENCLATURE DESCRIPTION 1st, 2nd and 3rd Character – Discharge Size and Type 4SD = 4" discharge, 3" solids handling, dual seal with seal fail probe in pump. 2 = three phase, 200 V* 5 = three phase, 575 V 3 = three phase, 230 V 8 = single phase, 208 V 4th Character – Mechanical Seals 5 = Silicon carbide/silicon carbide/BUNA – lower seal and carbon/ceramic/BUNA – upper seal (standard) 3 = Silicon carbide/tungsten carbide/BUNA – lower seal and carbon/ceramic/BUNA – upper seal (optional) 8th Character – Impeller Diameter A = 7.25", 5 HP D = 6.25", 11⁄2 HP B = 7.00", 3 HP E = 5.63", 11⁄2 HP C = 6.63", 2 HP F = 7.69", 71⁄2 HP 5th Character – Cycle/RPM 2 = 60 Hz/1750 RPM 6 = 50 Hz/1450 RPM * Not available on 71⁄2 HP. 9th Character – Cord Length (Power and Sensor) A = 20' (standard) F = 50' D = 30' J = 100' 6th Character – Horsepower F = 1½ HP H = 3 HP K = 7½ HP G = 2 HP J = 5 HP 10th Character – Options B = Bronze impeller E = Epoxy paint F = Both epoxy paint and bronze impeller 7th Character – Phase/Voltage 1 = single phase, 230 V 4 = three phase, 460 V 11th Character – Option H = Pilot duty thermal sensors (3 phase only!!) PAGE 3 APPLICATION DATA DIMENSIONS Maximum Solid Size 3" Minimum Casing Thickness 5 Casing Corrosion Allowance 1 Maximum Working Pressure 30 PSI Maximum Submergence 50 feet (All dimensions are in inches. Do not use for construction purposes.) ⁄16" ⁄8" ROTATION Fully submerged for continuous operation Minimum Submergence 6" below top of motor for intermittent operation Maximum Environmental Temperature 40ºC (104ºF) continuous operation 28.25" 60ºC (140ºF) intermittent operation CONSTRUCTION DETAILS 12.62" 4" 125 # ANSI FLANGE 6.75" KICKBACK 3.50" 9.50" 15.75" 14/3, type SJTOW: single phase, 1⁄2 and 2 HP Power Cable – Type Sensor Cable – Type 14/4, type STOW: single phase, 1½ - 3 HP and 5 HP, 460 V MATERIALS OF CONSTRUCTION 10/4, type STOW: single phase, 3 and 5 HP, three phase 5 HP, 230 V and 7½ HP Item Material No. Part Name Standard Optional 1 Impeller, non-clog 1003 1179 2 Castings 1003 3 Shaft-Keyed 300 Series SS 4 Fasteners 300 Series SS 5 Ball bearings Steel Power cable Additional 6 STOW, 20 feet lengths Seal sensor cable 7 O-ring BUNA-N Outer Mech. Service Rotary Stationary Elasto- Metal mers Parts Seal 8 OPT Heavy Silicon Tungsten BUNA-N 300 duty Carbide Carbide Series SS STD Mild Silicon Carbide 300 BUNA-N abrasives Series SS Material Code Engineering Standard 1003 Cast iron — ASTM A48 Class 30 1179 Silicon bronze — ASTM C87600 16/2, type SJTOW: seal sensor only 18/4, type SJTOW: seal/heat sensor Motor Cover Gray Cast Iron – ASTM A48 Class 30 Bearing Housing Gray Cast Iron – ASTM A48 Class 30 Seal Housing Gray Cast Iron – ASTM A48 Class 30 Casing Gray Cast Iron – ASTM A48 Class 30 Impeller Gray Cast Iron – ASTM A48 or Cast Bronze – ASTM B584 C87600 Motor Shaft AISI 300 Series Stainless Steel Motor Design NEMA 56 Frame, oil filled with Class F Insulation Motor Overload Protection Single Phase: on winding thermal overload protection Three Phase: require ambient compensated Class 10, quick trip overloads in the control panel. Motor Seal Fail (Moisture) Detection Seal fail sensor in an oil-filled seal chamber. Connect to an optional relay in control panel. Optional Motor Thermal Protection Normally closed on-winding thermostats open at 275º F (135 ºC) and close at 112º F (78º C). Require terminal connection in the control panel. External Hardware 300 Series Stainless Steel Impeller Type Semi-open with pump out vanes on back shroud Oil Capacity – Seal Chamber 1.75 quarts 22 Oil Capacity – Motor Chamber 1½-5 HP single and three phase: 7 quarts 44 6 7½ HP three phase: 6.5 quarts STANDARD PARTS Upper Ball Bearing Lower Mechanical Seals – Standard 11⁄2 – 5 HP single and three phase: single row ball– SKF™ 6204-2Z 33 22 88 11 71⁄2 HP three phase: single row ball – SKF™ 6204-2Z 11⁄2 – 5 HP single and three phase: single row ball – SKF™ 5206-2Z 71⁄2 HP three phase: double row ball – SKF™ 5206-2Z Upper Carbon/Ceramic; Type 21 Lower Silicon Carbon/Silicon Carbon; Type 31 Mechanical Seals – Optional Lower Silicon Carbide/Tungsten Carbide: Type 21 O-Ring – Stuffing Box BUNA-N, AS 568A-265 O-Ring – Motor Cover BUNA-N, AS 568A-374 Xylem Inc. 2881 East Bayard Street Ext., Suite A Seneca Falls, NY 13148 Phone: (866) 325-4210 Fax: (888) 322-5877 www.gouldswatertechnology.com Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license. © 2014 Xylem Inc. B4SD R1 November 2014 22 6 5 5 7 2 7 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes XMP Toolkit : 3.1-701 Producer : Adobe PDF Library 10.0.1 Creator Tool : Adobe InDesign CS6 (Macintosh) Create Date : 2014:11:04 13:54:57-05:00 Modify Date : 2015:05:29 09:49:43-04:00 Page Count : 4 Creator : Adobe InDesign CS6 (Macintosh) Trapped : FalseEXIF Metadata provided by EXIF.tools