538313 1 Goulds 4SD Sewage Pump Brochure

: Pump 538313 1 Goulds 4Sd Sewage Pump Brochure 538313_1_Goulds 4SD Sewage Pump Brochure pdf

Open the PDF directly: View PDF .
Page Count: 4

4SD

SUBMERSIBLE SEWAGE PUMP

DUAL SEAL WITH SEAL SENSOR PROBE

TECHNICAL BROCHURE

B4SD R1

PAGE 2

Wastewater

Goulds Water Technology

APPLICATIONS

Used in a variety of residential, commercial and

industrial applications such as:

• Sewage systems

• Flood and pollution control

• Dewatering/Efuent

• Farms

• Hospitals

• Trailer courts

• Motels

SPECIFICATIONS

Pump:

• Maximum solid size: 3”

• Discharge size: 4”, 125 # ANSI ange

• Maximum capacity: 620 GPM

• Maximum total head: 60 feet

• 300 Series stainess steel fasteners

• 20’ Power cord

• Standard silicon carbide/silicon carbide outer seal

Motor:

• Maximum ambient temperature: 104º F (40º C)

continuous duty, 140º F (60º C) intermittent duty

• Rated for continuous duty when fully submerged

• Insulation: Class F

• 60 Hertz

• Single row ball bearings

• 300 Series stainless steel keyed shaft

Single Phase:

• 1.5 - 5 HP

• 208 and 230 volts

• Built-in thermal overloads with automatic reset

• Built-in capacitors

Three Phase:

• 1.5 - 7.5 HP

• 200, 230, 460 and 575 volts

• Class 10 overload protection must be provided in

control panel

MOTORS

• Fully submerged in oil-lled chamber. High grade

turbine oil surrounds motor for more efcient heat

dissipation, permanent lubrication of bearings and

mechanical seal for complete protection against

outside environment.

• Class F insulation

• Designed for Continuous Operation: Pump ratings

are within the motor manu facturer’s recommended

working limits and can be operated continuously

without damage when fully submerged.

• Bearings: Upper and lower heavy duty ball bearing

construction for precision positioning of parts and

to carry thrust loads.

• Power and Control Cables: Severe duty rated,

oil and water resistant. Epoxy seal on motor end

provides secondary moisture barrier in case of outer

jacket damage and to prevent oil wicking. 20 foot

standard with optional lengths available.

• O-ring: Assures positive sealing against

contaminants and oil leakage.

FEATURES

Impeller: Cast iron, two vane semi-open, non-clog

with pump-out vanes for mechanical seal protection.

Balanced for smooth operation. Silicon bronze

impeller available as an option.

Casing: Heavy duty cast iron, volute type for maximum

efciency. 4" ange conforms to 125 # ANSI standard.

Connects to A10-40 or A10-60 guide rail system.

Dual Mechanical Seals: Silicon carbide vs. silicon

carbide outer seal and ceramic vs. carbon inner seal,

stainless steel metal parts, BUNA-N elastomers. Upper

and lower shaft seals are positioned independently

and are separated by an oil-lled chamber.

Tested to UL 778 and CSA 22.2 108 Standards

By Canadian Standards Association

File #LR38549

Seal Sensor Probe: Located in oil-lled chamber.

If pumpage should begin to leak past lower seal it

indicates to pump control panel a fault has occurred.

Requires optional Seal Fail Circuit in the control panel.

Shaft: 300 series stainless steel keyed design.

Fasteners: 300 series stainless steel.

Capable of running dry with out damage to

components.

AGENCY LISTINGS

PAGE 3

Wastewater

Goulds Water Technology

MODEL AND MOTOR INFORMATION

1st, 2nd and 3rd Character – Discharge Size and Type

4SD = 4" discharge, 3" solids handling, dual seal with

seal fail probe in pump.

4th Character – Mechanical Seals

5 = Silicon carbide/silicon carbide/BUNA – lower seal

and carbon/ceramic/BUNA – upper seal (standard)

3 = Silicon carbide/tungsten carbide/BUNA – lower

seal and carbon/ceramic/BUNA – upper seal (op-

tional)

5th Character – Cycle/RPM

2 = 60 Hz/1750 RPM 6 = 50 Hz/1450 RPM

6th Character – Horsepower

F = 1½ HP H = 3 HP K = 7½ HP

G = 2 HP J = 5 HP

7th Character – Phase/Voltage

1 = single phase, 230 V 4 = three phase, 460 V

NOMENCLATURE DESCRIPTION

2 = three phase, 200 V* 5 = three phase, 575 V

3 = three phase, 230 V 8 = single phase, 208 V

* Not available on 71⁄2 H P.

8th Character – Impeller Diameter

A = 7.25", 5 HP D = 6.25", 11⁄2 HP

B = 7.00", 3 HP E = 5.63", 11⁄2 HP

C = 6.63", 2 HP F = 7.69", 71⁄2 HP

9th Character – Cord Length (Power and Sensor)

A = 20' (standard) F = 50'

D = 30' J = 100'

10th Character – Options

B = Bronze impeller

E = Epoxy paint

F = Both epoxy paint and bronze impeller

11th Character – Option

H = Pilot duty thermal sensors (3 phase only!!)

Order

Number HP Phase Volts RPM

Impeller Maximum

Amps

Locked

Rotor

Amps

KVA

Code

Power

Cable

F.L. Motor

Efciency %

Resistance Weight

(lbs.)

Dia. (In.) Code Start Line-Line

4SD52F8EA

1.5

1208

1750

5.63 E

17.2 50.8 B 14/3 80 1.1 0.9

195

4SD52F1EA 230 14.7 29.5 E 70 1.4 1.8

4SD52F2EA

200 11.5 40.9 H

14/4

1.7

4SD52F3EA 230 10.0 40.0 F 83 2.3

4SD52F4EA 460 5.0 20.0 F 83 9.3

4SD52F5EA 575 4.0 14.4 H 74 14.8

4SD52F8DA

1.5

1208

6.25 D

17.2 50.8 B 14/3 80 1.1 0.9

195

4SD52F1DA 230 14.7 29.5 E 70 1.4 1.8

4SD52F2DA

200 11.5 40.9 H

14/4

1.7

4SD52F3DA 230 10.0 40.0 F 83 2.3

4SD52F4DA 460 5.0 20.0 F 83 9.3

4SD52F5DA 575 4.0 14.4 H 74 14.8

4SD52G8CA

1208

6.63 C

20.3 50.8 B 14/3 80 1.1 0.9

200

4SD52G1CA 230 17.3 36.9 D 75 1.4 1.5

4SD52G2CA

200 13.3 40.9 H

14/4

1.7

4SD52G3CA 230 11.6 40.0 F 83 2.3

4SD52G4CA 460 5.8 20.0 F 83 9.3

4SD52G5CA 575 4.6 14.4 H 74 14.8

4SD52H8BA

1208

7.00 B

25.5 50.8 B 10/3 80 1.1 0.9 208

4SD52H1BA 230 21.5 46.4 C 79 1.0 1.0

4SD52H2BA

200 16.6 53.8 G 10/4 85

1.3

205

4SD52H3BA 230 14.4 49.5 H

14/4

83 1.9

4SD52H4BA 460 7.2 24.8 H 83 7.5

4SD52H5BA 575 5.8 17.3 G 78 11.6

4SD52J1AA

1 230

7.25 A

26.5 57.7 A 10/3 80 1.0 0.8 213

4SD52J2AA

200 19.1 73.9 F10/4 84

0.9

210

4SD52J3AA 230 16.6 63.6 E 85 1.2

4SD52J4AA 460 8.3 31.8 E 14/4 85 4.8

4SD52J5AA 575 6.6 22.8 E 80 7.4

4SD52K3FA

7.5 3

230

7.69 F

23.0 105.0 G

10/4

0.7

2254SD52K4FA 460 11.5 52.5 G 83 2.8

4SD52K5FA 575 9.2 42.0 E 84 4.4

3.50"

4" 125 #

ANSI FLANGE

6.75"

28.25"

KICKBACK

ROTATION

12.62"

15.75"

9.50"

APPLICATION DATA

CONSTRUCTION DETAILS

STANDARD PARTS

Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license.

Xylem Inc.

2881 East Bayard Street Ext., Suite A

Seneca Falls, NY 13148

Phone: (866) 325-4210

Fax: (888) 322-5877

www.gouldswatertechnology.com

Maximum Solid Size 3"

Minimum Casing Thickness 5⁄16"

Casing Corrosion Allowance 1⁄8"

Maximum Working Pressure 30 PSI

Maximum Submergence 50 feet

Minimum Submergence

Fully submerged for continuous operation

6" below top of motor for intermittent

operation

Maximum Environmental

Temperature

40ºC (104ºF) continuous operation

60ºC (140ºF) intermittent operation

Ball Bearing

Upper

11⁄2 – 5 HP single and three phase: single row ball– SKF™ 6204-2Z

71⁄2 HP three phase: single row ball – SKF™ 6204-2Z

Lower

11⁄2 – 5 HP single and three phase: single row ball – SKF™ 5206-2Z

71⁄2 HP three phase: double row ball – SKF™ 5206-2Z

Mechanical Seals – Standard Upper Carbon/Ceramic; Type 21

Lower Silicon Carbon/Silicon Carbon; Type 31

Mechanical Seals – Optional Lower Silicon Carbide/Tungsten Carbide: Type 21

O-Ring – Stufng Box BUNA-N, AS 568A-265

O-Ring – Motor Cover BUNA-N, AS 568A-374

Power Cable – Type

14/3, type SJTOW: single phase, 1⁄2 and 2 HP

14/4, type STOW: single phase, 1½ - 3 HP and 5

HP, 460 V

10/4, type STOW: single phase, 3 and 5 HP, three

phase 5 HP, 230 V

and 7½ HP

Sensor Cable – Type 16/2, type SJTOW: seal sensor only

18/4, type SJTOW: seal/heat sensor

Motor Cover Gray Cast Iron – ASTM A48 Class 30

Bearing Housing Gray Cast Iron – ASTM A48 Class 30

Seal Housing Gray Cast Iron – ASTM A48 Class 30

Casing Gray Cast Iron – ASTM A48 Class 30

Impeller Gray Cast Iron – ASTM A48 or Cast Bronze – ASTM

B584 C87600

Motor Shaft AISI 300 Series Stainless Steel

Motor Design NEMA 56 Frame, oil lled with Class F Insulation

Motor Overload Protection

Single Phase: on winding thermal overload

protection

Three Phase: require ambient compensated Class

10, quick trip overloads in the control panel.

Motor Seal Fail (Moisture)

Detection

Seal fail sensor in an oil-lled seal chamber.

Connect to an optional relay in control panel.

Optional Motor Thermal

Protection

Normally closed on-winding thermostats open

at 275º F (135 ºC) and close at 112º F (78º C).

Require terminal connection in the control panel.

External Hardware 300 Series Stainless Steel

Impeller Type Semi-open with pump out vanes on back shroud

Oil Capacity – Seal Chamber

1.75 quarts

Oil Capacity – Motor

Chamber

1½-5 HP single and three phase: 7 quarts

7½ HP three phase: 6.5 quarts

DIMENSIONS

(All dimensions are in inches. Do not use for construction purposes.)

Item Material

No. Part Name Standard Optional

1 Impeller, non-clog 1003 1179

2 Castings 1003

3 Shaft-Keyed 300 Series SS

4 Fasteners 300 Series SS

5 Ball bearings Steel

6 Power cable STOW, 20 feet Additional

Seal sensor cable lengths

7 O-ring BUNA-N

Outer Elasto- Metal

Mech. Service Rotary Stationary mers Parts

Seal

8 OPT Heavy Silicon Tungsten BUNA-N 300

duty Carbide Carbide Series SS

STD Mild Silicon Carbide BUNA-N 300

abrasives Series SS

Material Code Engineering Standard

1003 Cast iron — ASTM A48 Class 30

1179 Silicon bronze — ASTM C87600

MATERIALS OF CONSTRUCTION

538313 1 Goulds 4SD Sewage Pump Brochure

Navigation menu

Versions of this User Manual:

Views

Navigation