539743 1 Sta Rite HMS Series Jet Pump Brochure
: Pump 539743 1 Sta-Rite Hms Series Jet Pump Brochure 539743_1_Sta-Rite HMS Series Jet Pump Brochure pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
STA-RITE HMS Series ® Cast iron horizontal multi-stage jet pumps FEATURES Automatic Pressure Regulator: Fasteracting and quieter, design eliminates “hunting” for correct drive pressure. New improved stem and guide are precisely molded to assure efficient, trouble-free performance on all deep wells. See ordering information (deep well only). Quality Construction: Close-grained cast iron pump body is rugged, one-piece unit, specially treated to resist corrosion. Drain port provided for easy winterizing. Precision-Machined Diffusers: Assure faster priming. UL778/CSA108 HMS Series Multi-Stage Jet Pumps are Applications the highest performing pumps Water systems and sprinkling… for homes, farms and cottages. available in its category. The HMS Series Convertible Jets utilize the Polycarbonate Impellers: Precisionmolded for perfect balance, and ultrasmooth for highest performance and efficiency. SPECIFICATIONS built-in regulator, offering easier Body: One-piece rugged cast iron priming and better range of Motor Windings: Superior insulation materials protect against excessive moisture and contaminants to ensure prolonged motor life. Pump and Motor Shaft: 416 stainless steel performance from a complete line of Shallow Well, 4" Double Pipe, 2" and 3" Impeller: Polycarbonate Single Pipe Jet Packages. Pump may Diffuser: Corrosion-resistant cast iron also be operated as a self-priming Pressure Switch Pre-Set: 30–50 PSI centrifugal (to 25 ft.) to provide a wide Suction Ports: Drive-over-Suction range of high pressure applications. ORDERING INFORMATION CATALOG NUMBER HMSD HMSE HMSF HP DESCRIPTION 3/4 Deep Well Jet 1 Deep Well Jet 1-1/2 Deep Well Jet PIPE TAPPING SIZES SUCT. 1-1/4" 1-1/4" 1-1/4" DRIVE 1" 1" 1" DISCH. 1" 1" 1" MOTOR APPROX. STAGES VOLTAGE WT. LBS. 2 2 2 115/230 115/230 115/230 AUTOMATIC PRESSURE REGULATOR – DEEP WELL Mechanical Shaft Seal: Precision-lapped and highly polished carbon-ceramic, stainless steel construction. Internal design guarantees continuous water lubrication for maximum protection. 50 80 85 CATALOG NUMBER DESCRIPTION APPLICATION APPROX. WT. LBS. PKG 107 Regulator, tubing, pipe plug and compression fitting Required for ALL deep well installations 4 Dustproof Cover: All electrical components are protected from dirt, dust and insects by a dustproof canopy. Ventilating air cannot contaminate vital switching components. This eliminates the most common cause of motor failure. Balanced Rotor: Diecast under high pressures for uniform performance and greater efficiency...dynamically balanced. Heavy-Duty Ball Bearings: Shielded, permanently lubricated bearings are extensively tested to ensure extended life and smooth, quiet operation. Pump and Motor Shaft: Stainless steel for maximum corrosion resistance;. one-piece threaded shaft for positive impeller drive and alignment. Order pump and pressure regulator, if required, from ordering information tables above. A Jet Package and the Automatic Pressure Regulator, described above, are required on all deep well installations. 1 s4511ws STA-RITE HMS Series ® Cast iron horizontal multi-stage jet pumps PUMP PERFORMANCE: Shallow Well CATALOG NUMBER JET* NUMBER HP USES VENTURI USES NOZZLE HMSD 3/4 PKG 1 - 29SD N32P-66B J34P-41 HMSE 1 PKG 1 - 10SD N32P-67B J34P-44 HMSF 1-1/2 PKG 1 - 10SD N32P-67B J34P-44 5' 10' 15' 20' 25' 20 30 40 50 60 70 80 Shut-off 20 30 40 50 60 70 80 Shut-off 20 30 40 50 60 70 80 90 100 Shut-off 9.6 9.1 8.8 8.5 7.7 5.5 3.5 102 13.0 12.5 12.2 12.1 12.0 10.2 7.4 108 15.9 15.6 15.3 14.9 14.4 13.7 12.6 9.5 5.9 120 8.2 7.9 7.7 7.6 7.3 5.1 3.1 96 11.2 11.0 10.9 10.8 10.8 9.6 6.8 108 13.3 13.2 13.1 13.0 12.9 12.7 12.1 8.5 5.0 120 7.0 6.5 6.3 6.2 6.2 4.7 2.8 96 9.8 9.5 9.4 9.2 9.2 8.6 6.2 108 12.2 12.2 12.1 11.9 11.7 11.5 10.8 7.8 4.4 114 5.8 5.6 5.6 5.6 5.6 4.2 2.3 96 7.8 7.6 7.6 7.6 7.6 7.4 5.5 102 9.6 9.5 9.4 9.3 9.2 9.0 8.7 7.2 3.8 114 3.9 3.9 3.9 3.9 3.9 3.6 1.9 90 5.8 5.7 5.7 5.7 5.7 5.7 4.8 102 7.0 7.0 6.9 6.8 6.7 6.6 6.4 5.7 3.2 108 * Order Jet Package separately. Pump Performance 0 50 Tested and rated in accordance with Water Systems Council Standards. CAPACITY LITERS PER MINUTE 100 150 200 NOTE: Pumps installed with a Pro-Source® tank require a 100 PSI relief valve. Pumps installed with a conventional tank require a 75 PSI relief valve. Relief valve must be capable of relieving entire flow of pump at relief pressure. 250 180 160 50 HM SF HM HM SD 120 SE 40 100 30 25' 80 20 25' 60 40 25' 20 20' 20' 15' 0 10 20 30 10' 40 10 20' 15' 15' TOTAL HEAD IN METERS 140 TOTAL HEAD IN FEET Total Suction Lift Ft. DISCH. PRESS. PSI 10' 10' 50 60 70 0 NOTE: Dotted lines indicate performance reduction at high suction lift. CAPACITY GALLONS PER MINUTE 2 s4511ws STA-RITE HMS Series ® Cast iron horizontal multi-stage jet pumps PUMP PERFORMANCe (Capacity in Gallons Per Minute) CENTRIFUGAL APPLICATION Catalog Number HP HMSD 3/4 HMSE HMSF 1 1-1/2 Discharge Pressure PSI Total Suction Lift Ft. 20' 30' 40' 50' 60' Shut-off Pressure PSI 5 37 30 24 15 – 60 10 35 29 21 13 – 60 15 33 27 19 9 – 60 20 32 26 17 6 – 60 25 31 24 15 – – 60 5 47 40 33 24 10 65 10 46 38 31 21 7 65 15 44 36 28 18 – 65 20 42 35 26 15 – 65 25 41 33 24 12 – 65 5 60 53 46 36 23 68 10 58 52 43 33 21 68 15 56 49 41 30 16 68 20 55 47 39 27 12 68 25 54 41 36 25 – 68 Tested and rated in accordance with Water Systems Council Standards. NOTE: Pumps installed with a Pro-Source® tank require a 100 PSI relief valve. Pumps installed with a conventional tank require a 75 PSI relief valve. Relief valve must be capable of relieving entire flow of pump at relief pressure. OUTLINE DIMENSIONS 1 NPT DISCHARGE B Cat. No. A B C HMSD 16-7/8 9-1/2 5-1/8 HMSE 17-3/4 9-1/2 5-1/8 HMSF 18-1/4 10 5-5/8 C 1-15/16 8-3/4 1 NPT DRIVE LINE 1-1/4 NPT 1-1/4 NPT SUCTION 7-1/4 5-3/8 6 A 3-1/2 6-3/4 11-13/16 3-3/8 DIA. (4) HOLES 1/8 (Order separately) 3-3/8 10-1/2 6-3/4 3-3/4 7-1/2 Dimensions (in inches) are for estimating purposes only. 3 s4511ws STA-RITE HMS Series ® Cast iron horizontal multi-stage jet pumps PUMP PERFORMANCe (Capacity in Gallons Per Minute) DEEP WELL 2" SINGLE PIPE: 40 PSI Cat. No. HP HMSD 3/4 HMSE HMSF 1 1-1/2 Pumping Depth in Feet Jet No. Uses Venturi Uses Nozzle 30' 40' 50' 60' 70' 13AP J32P-26 J34P-44 12.0 10.8 9.6 8.1 6.9 5.5 22AP J32P-22 J34P-43 7.9 8AP J32P-18 J34P-42 5AP J32P-29 J34P-41 16.3 15.6 14.1 12.0 20' 80' 90' 100' 110' 120' 130' 140' 150' 160' 6.7 5.5 4.7 3.9 3.0 4.0 3.6 3.1 9.9 8.2 6.0 8.9 7.9 7.0 4.7 3.6 2.5 4AP J32P-24 J34P-41 19AP J32P-20 J34P-43 15AP J32P-33 J34P-41 20.0 18.5 17.0 13.6 10.4 7.6 5.0 9CP J32P-26 J34P-41 9.2 8.0 23AP J32P-20 J34P-44 10.6 5.8 6.0 4.5 3.7 2.7 2.2 4.0 3.2 2.3 1.8 1.3 3.0 2.2 4.3 3.5 2.7 2.4 2.0 3.0 2.5 2.0 DEEP WELL 3" SINGLE PIPE: 40 PSI HMSD HMSE HMSF 3/4 1 1-1/2 17CP J32P-29 J34P-44 12.8 11.5 10.2 18CP J32P-24 J34P-44 8.9 7.6 6.1 7.8 6.9 16CP Factory Installed 7CP J32P-32 J34P-41 17.8 16.2 14.6 13.0 11.4 9.6 7.7 9CP J32P-26 J34P-41 9.8 9.0 10CP J32P-38 J34P-45 21.7 19.7 17.9 15.9 14.0 11.0 8.0 9CP J32P-26 J34P-41 19CP Factory Installed J34P-41 10.7 6.0 11.1 10.8 10.6 5.3 4.5 3.6 5.0 4.4 3.9 3.4 7.9 6.7 5.8 5.0 4.1 9.7 8.9 7.5 6.5 5.5 6.9 6.1 5.3 4.6 4.1 3.0 2.5 2.0 3.9 3.5 3.0 5.3 4.6 4.1 DEEP WELL 4" DOUBLE pipe: 40 PSI HMSD HMSE 3/4 1 HMSF 1-1/2 CK2 J32P-29 J34P-44 12.8 11.5 10.2 CK2 J32P-24 J34P-44 8.9 7.6 6.1 7.8 6.9 15SD Factory Installed CK3 J32P-32 J34P-41 17.8 16.2 14.6 13.0 11.4 9.6 7.7 CK3 J32P-26 J34P-41 9.0 CK1 J32P-20 J34P-43 CK4 J32P-38 J34P-45 21.7 19.7 17.9 15.9 14.0 11.0 8.0 CK3 J32P-26 J34P-41 4SD Factory Installed 10.7 9.8 6.0 5.3 7.9 11.1 10.8 10.6 9.7 4.5 3.6 5.0 4.4 3.9 3.4 6.7 5.8 5.0 4.1 5.0 4.5 6.5 5.5 6.9 6.1 8.9 7.5 Tested and rated in accordance with Water Systems Council Standards. NOTE: Pumps installed with a Pro-Source® tank require a 100 PSI relief valve. Pumps installed with a conventional tank require a 75 PSI relief valve. Relief valve must be capable of relieving entire flow of pump at relief pressure. 293 WRIGHT STREET, DELAVAN, WI 53115 WWW.STA-RITE.COM PH: 888-782-7483 ORDERS FAX: 800-426-9446 Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. s4511ws (05/20/13)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Create Date : 2013:05:24 08:12:43-05:00 Modify Date : 2015:06:23 10:22:25-04:00 Page Count : 4EXIF Metadata provided by EXIF.tools