548293 1 Grundfos CR Replacement Parts List

: Pump 548293 1 Grundfos Cr Replacement Parts List 548293_1_Grundfos CR Replacement Parts List pdf

Open the PDF directly: View PDF PDF.
Page Count: 12

Download548293 1 Grundfos CR Replacement Parts List
Open PDF In BrowserView PDF
GRUNDFOS CR SERVICE MANUAL

CRN1s-H

Parts List & Kits
Contents
Parts List
Spare Part Kits
Accessories
Special Tools
Standard Tools
Tools for Torques

Exploded View CRN1s-H

2

Parts List & Kits CRN1s-H
Pos.
No.

Part Description

Model

Stages

No.
Used

Comments/Dimensions

B.O.M.
Ref. No.

Material
No.

Included
in kits ?

parts list
	 2	
Motor Stool-Cat. Cast Iron, w/o insert Pos. 77	
3/2-27	
				
		
Motor Stool-Stainless Option for GI - w/o Pos. 77	
3/2-27	
				
	 4	
Chamber, Complete with Pos. 45 & 65	
3/2-36	
			
3/2-36	
	 4a	 Chamber Cpl. w/Pos. 45 & 65 & Bearing 	
3/2-36	
	
	
Chamber Cpl. w/Pos. 45 & 65 & Brg. (option)	
3/2-36	
	 5a	 Chamber, Bottom Complete with Pos. 45 & 65	
3/2-36	
	 6	
Volute	
3/2-36	
	
7	
Coupling Guard	
3/2-27	
				
	 7a	 Screw for Coupling Guard	
3/2-36	
	 9	
Allen Screw 	
3/2-27	
				
	 10	 Shaft Pin	
3/2-36	
	 10a	 Coupling Half	
3/2-27	
			
3/2-27	
				
	 18(a)	 Priming/Vent Plug	
3/2-36	
	 19(a)	 Pipe Plug 	
3/2-36	
	 21a	 Pipe Plug 	
3/2-36	
	 23(c )	 Plug 	
3/2-36	
	 23a, e	 Plug (option)	
3/2-36	
	 23b, f	 Pipe Plug for Pos. 23a , 23e	
3/2-36	
	 23d	 Plug, Vented for Pos. 77a Cool Top® option only	
3/2-36	
	 25	 Drain Plug 	
3/2-36	
	 26	 Staybolt	
3/2-3	
			
4	
			
5	
			
6	
			
7	
			
8	
			
9	
			
10	
			
11	
			
12	
			
13	
			
15	
			
17	
			
19	
			
21	
			
23	
			
25	
			
27	
			
30	
			
33	
			
36	
		
Staybolt 	
3/2-3	
		
(Cool Top®, Back-to-Back & Tandem Seal Option)	
4	
			
5	
			
6	
			
7	
			
8	
			
9	
			
10	
			
11	
			
12	
			
13	
			
15	
			
17	
			
19	
			
21	
			
23	
			
25	
			
27	
			
30	
			
33	
			
36	
			
Due to part changes over time, all position numbers
(1-203) may not be used.

1	
1	
1	
1	
^^^	
^^^	
^^^^	
^^^^	
1*	
1	
2	
2	
4	
4	
4	
1	
2	
1	
2	
*	
**	
**	
**	
**	
**	
2	
1	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	
4	

NEMA, 56C, 1/3 - 2HP	
NEMA, 182/184TC, 3 - 5HP	
NEMA, 56C, 1/3 - 2HP	
NEMA, 182/184TC, 3 - 5HP	
PTFE Pos. 45	
PTFE Pos. 45, (97690021 is a qty. of 5) 	
Silicon Carbide Bearing, PTFE Pos. 45	
Graflon Bearing, PTFE Pos. 45	
PTFE Pos. 45	
GA, Stainless Steel	
NEMA-56C	
NEMA, 182-215TC	
Screw comb. slot torx/straight slot 4 x 8mm	
M6 x 20mm, Delta Tone/Seal	
M8 x 25mm, Delta Tone/Seal	
ø5 x 26mm	
NEMA, 56C, 1/3 - 2HP. ø15.8 / ø12	
NEMA, 143/5TC, 1/3-3HP.ø22.225 /ø12 (Mach)	
NEMA, 182/184TC, 3-5HP. ø28.5/ø12	
G 1/2A, NV24 with NV9 x M8 stem	
1/4” NPT,SS SQHD, with Loctite	
1/4” NPT,SS SQHD, with Loctite	
G 1/2A, Solid no port, NV24 	
G 1/2A, w/1/4”port, NV24 	
1/4” NPT,SS SQHD, with Loctite	
G 1/2A, NV24, Vented	
1/4” NPT,SS SQHD, with Loctite	
M12, ø10,7 x 69mm	
M12, ø10,7 x 87mm	
M12, ø10,7 x 106mm	
M12, ø10,7 x 123mm	
M12, ø10,7 x 141mm	
M12, ø10,7 x 160mm	
M12, ø10,7 x 177mm	
M12, ø10,7 x 195mm	
M12, ø10,7 x 214mm	
M12, ø10,7 x 231mm	
M12, ø10,7 x 249mm	
M12, ø10,7 x 285mm	
M12, ø10,7 x 322mm	
M12, ø10,7 x 357mm	
M12, ø10,7 x 393mm	
M12, ø10,7 x 430mm	
M12, ø10,7 x 465mm	
M12, ø10,7 x 501mm	
M12, ø10,7 x 555mm, 4 pole & 50 Hz.	
M12, ø10,7 x 609mm, 4 pole & 50 Hz.	
M12, ø10,7 x 663mm, 4 pole & 50 Hz.	
M12, ø10,7 x 177mm	
M12, ø10,7 x 195mm	
M12, ø10,7 x 214mm	
M12, ø10,7 x 231mm	
M12, ø10,7 x 249mm	
M12, ø10,7 x 267mm	
M12, ø10,7 x 285mm	
M12, ø10,7 x 303mm	
M12, ø10,7 x 322mm	
M12, ø10,7 x 339mm	
M12, ø10,7 x 357mm	
M12, ø10,7 x 393mm	
M12, ø10,7 x 430mm	
M12, ø10,7 x 465mm	
M12, ø10,7 x 501mm	
M12, ø10,7 x 537mm	
M12, ø10,7 x 573mm	
M12, ø10,7 x 609mm	
M12, ø10,7 x 663mm, 4 pole & 50 Hz.	
M12, ø10,7 x 717mm, 4 pole & 50 Hz.	
M12, ø10,7 x 771mm, 4 pole & 50 Hz.	

This column indicates which model uses
the spare part. If blank, the part is used in all models.

96436510		
96436511		
96497267		
96497271		
96439481		
96439482	
97690021	
96439476		
96440615	
	
96439485	
96588149	
95922064		
96438137		
96438138		
96488481		
00ID7899		
00ID7900		
310192		
410108		
97851501		
410109		
405150	
95061351	
91136507		
91136507		
370025	
95061733	
91120659		
91136507		
96510323		
91136507		
97683238		
97683239		
97683241		
97683242		
97683243		
97683245		
97683246		
97683247		
97683250		
97683251		
97683252		
97683255		
97683258		
97683260		
97683262		
97683264		
97683266		
97683268		
97683271		
97683273		
97683274		
97683246		
97683247		
97683250		
97683251		
97683252		
97683254		
97683255		
97683256		
97683258		
97683259		
97683260		
97683262		
97683264		
97683266		
97683268		
97683270		
97683272		
97683273		
97683274		
97683275		
97683276		

No
No
No
No
No
No
YES
YES
No
No
No
No
No
YES
YES
YES
YES
YES
YES
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No

B.O.M. Ref. Number is only available if it is not included in a kit or does
not have a material number listed. If it is included in a kit (YES), or has a
material number, request one of these numbers. If not included in a kit
(No), but has a Material Number, use Material Number.

3

Parts List & Kits CRN1s-H
Pos.
No.

Part Description

Model

Stages

No.
Used

Comments/Dimensions

B.O.M.
Ref. No.

Material
No.

Included
in kits ?

parts list
	 28	 Motor Bolt 	
3/2-27	
4	
NEMA, 56C, 1/3 - 2HP. UNC 3/8” x 25mm	
				
4	
NEMA, 182/184TC, 3 - 5HP.UNC1/2” x 25mm	
	 28g	 Bolt for foot Pos. 56a	
3/2-36	
2	
M12 x 1.75 x 20mm, 316SS, Delta Tone/Seal	
	 36	 Staybolt Nut	
3/2-36	
4	
19mm x M12, 316SS	
	 37	 Sleeve O-ring	
3/2-36	
uu	 EPDM, ø137.5 x 3.3mm	
		
Sleeve O-ring	
3/2-36	
uu	 FKM, ø137.5 x 3.3mm	
	 37b	 Sleeve O-ring (option)	
3/2-36	
uu	 FXM, ø137.5 x 3.3mm	
			
3/2-36	 uu	 FFKM, ø136.12 x 3.53mm	
	 45	 Neck Ring	
3/2-36	
# stgs	 ø41.3 x ø30.6 x .75mm, PTFE 	
	 47a	 Bearing Ring/Spacer	
3/2-36	
^^^^	 SiC 150, ø17.37 x ø13.10 x ø10.9 x 13mm	
	
	
Brg. Ring/Spacer (option for Graflon Pos. 4a)	
3/2-36	
^^^^	 TC, ø15.92 x ø13.10 x ø10.9 x 9.7mm	
	 49	 Impeller 	
3/2-36	
# stgs	 ø73.0 x ø30.6 x 9.0mm (back-plate .5mm) 	
	 50a	 Top Guide Vane	
3-36	
1		
		
Top Guide Vane Plate (option for destaging)	
3/2	
1		
	 51	 Shaft, Complete	
3/2-3	
1	
ø12 x 160.5mm	
			
4	
1	
ø12 x 180.5mm	
			
5	
1	
ø12 x 196.5mm 	
			
6	
1	
ø12 x 214.5mm	
			
7	
1	
ø12 x 234.5mm	
			
8	
1	
ø12 x 250.5mm	
			
9	
1	
ø12 x 268.5mm	
			
10	
1	
ø12 x 288.5mm	
			
11	
1	
ø12 x 304.5mm	
			
12	
1	
ø12 x 322.5mm	
			
13	
1	
ø12 x 342.5mm	
			
15	
1	
ø12 x 376.5mm	
			
17	
1	
ø12 x 412.5mm	
			
19	
1	
ø12 x 450.5mm	
			
21	
1	
ø12 x 484.5mm	
			
23	
1	
ø12 x 520.5mm	
			
25	
1	
ø12 x 556.5mm	
			
27	
1	
ø12 x 592.5mm	
			
30	
1	
ø12 x 646.5mm, 4 pole & 50 Hz.	
			
33	
1	
ø12 x 700.5mm, 4 pole & 50 Hz.	
			
36	
1	
ø12 x 754.5mm, 4 pole & 50 Hz.	
		
Shaft, Cpl. 	
3/2-3	
1	
ø12 x 265.5mm	
		
(Cool Top®, Back-to-Back & Tandem Seal option)	
4	
1	
ø12 x 285.5mm	
			
5	
1	
ø12 x 301.5mm 	
			
6	
1	
ø12 x 319.5mm	
			
7	
1	
ø12 x 339.5mm	
			
8	
1	
ø12 x 355.5mm	
			
9	
1	
ø12 x 373.5mm	
			
10	
1	
ø12 x 393.5mm	
			
11	
1	
ø12 x 409.5mm	
			
12	
1	
ø12 x 427.5mm	
			
13	
1	
ø12 x 447.5mm	
			
15	
1	
ø12 x 481.5mm	
			
17	
1	
ø12 x 517.5mm	
			
19	
1	
ø12 x 555.5mm	
			
21	
1	
ø12 x 589.5mm	
			
23	
1	
ø12 x 625.5mm	
			
25	
1	
ø12 x 661.5mm	
			
27	
1	
ø12 x 697.5mm	
			
30	
1	
ø12 x 751.5mm, 4 pole & 50 Hz.	
			
33	
1	
ø12 x 805.5mm, 4 pole & 50 Hz.	
			
36	
1	
ø12 x 859.5mm, 4 pole & 50 Hz.	
	 55	 Outer Sleeve	
3/2-3	
1	
ø138 x 44.6mm	
			
4	
1	
ø138 x 62.6mm	
			
5	
1	
ø138 x 80.6mm	
			
6	
1	
ø138 x 98.6mm	
			
7	
1	
ø138 x 116.6mm	
			
8	
1	
ø138 x 134.6mm	
			
9	
1	
ø138 x 152.6mm	
			
10	
1	
ø138 x 170.6mm	
			
11	
1	
ø138 x 188.6mm	
			
12	
1	
ø138 x 206.6mm	
			
13	
1	
ø138 x 224.6mm	
			
15	
1	
ø138 x 260.6mm	
Due to part changes over time, all position numbers
(1-203) may not be used.

4

This column indicates which model uses
the spare part. If blank, the part is used in all models.

00ID1839		
00ID1840		
97672732		
00ID0876		
96438743		
96438744		
96458109		
96466718		
400003		
96437488		
400041	
	
96433166		
96457638		
96478562		
96439607	
96588198	
96440386	
96588199	
96440387	
96588230	
96440388		
96440389	
96588231	
96440390		
96440391		
96440392		
96440393		
96440394	
96588233	
96440395	
96588234	
96440396	
96588235	
96440398		
96440400		
96440401	
96588236	
96440403		
96440405	
96588237	
96440406		
96440408		
96440410		
96440411	
96588238	
96457560		
96457561		
96457562		
96457563		
96457564		
96457565		
96457566		
96457567		
96457568		
96457569		
96457570		
96457571		
96457573		
96457575		
96457576		
96457578		
96457580		
96457581		
96457583		
96457585		
96457586		
96439996		
96440025		
96441528		
96440014		
96441529		
96441531		
96440015		
96441532		
96441534		
96440016		
96441535		
96440017		

No
No
No
No
YES
YES
YES
YES
YES
YES
YES
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No

B.O.M. Ref. Number is only available if it is not included in a kit or does
not have a material number listed. If it is included in a kit (YES), or has a
material number, request one of these numbers. If not included in a kit
(No), but has a Material Number, use Material Number.

Parts List & Kits CRN1s-H
Pos.
No.

Part Description

Model

Stages

No.
Used

Comments/Dimensions

B.O.M.
Ref. No.

Material
No.

Included
in kits ?

parts list
	 55	 Outer Sleeve (continued)		
17	
1	
				
19	
1	
				
21	
1	
				
23	
1	
				
25	
1	
				
27	
1	
				
30	
1	
				
33	
1	
				
36	
1	
	 55b	 Sleeve flange	
	
3/2-36	
1	
	 56a	 Foot for Pos. 6 Cast Iron		
3/2-36	
1	
						
		
Foot for Pos. 6 Stainless Steel option for GI		
3/2-36	
1	
						
	 56b(d)	 Washer for bolt Pos. 56c		
3/2-36	
16	
	 56c	 Bolt for sleeve flange Pos. 55b	
	
3/2-36	
8	
	 56e	 Nut for bolt Pos. 56c		
3/2-36	
8	
	 56f	 Bolt for base Pos. 90	
56C/182TC	 3/2-36	
2	
	 56g	 Washer for bolt Pos. 56f		
3/2-36	
2	
	 60	 Stack Compression Spring		
3/2-36	
1	
	 64	 Spacing Pipe		
2-36	
^^^	
	 64a	 Spacing Pipe		
3/2-36	
^^^^	
	
	
Spacing Pipe (option for Graflon Pos. 4a)	
	
3/2-36	
^^^^	
	 64c	 Clamp, Splined		
3/2-36	
1	
	 65	 Neck Ring Retainer		
3/2-36	
# stgs	
	 66	 Lock Washer Set for Shaft 		
3/2-36	
1	
	 66a	 Washer for Staybolt		
3/2-36	
4	
	 67	 Lock Nut for Shaft 		
3/2-36	
1	
	 69	 Spacing Pipe		
3/2	
1	
	 72a	 Sleeve Flange O-ring		
3/2-36	
1	
				
3/2-36	
1	
		
Sleeve Flange O-ring (option)		
3/2-36	
1	
				
3/2-36	
1	
	 76	 Nameplate		
3/2-36	
1	
	 76a	 Rivet for Nameplate		
3/2-36	
2	
	 77	 Pump Head Cover for Motor Stool Pos. 2		
3/2-36	
1	
	 77a	 Pump Head Cover for Back-to-Back & Tand. Seal		
3/2-36	
1	
	 77a	 Pump Head Cover for Cool Top® (option)		
3/2-36	
1	
	 79	 Disc / Plate for Cool Top®		
3/2-36	
1	
	 90	 Main Support Baseplate 	
GA	
3/2-21	
1	
						
		
Main Support Baseplate - Longer versions 	
GA	
23-36	
1	
						
	 90a	 Bolt for motor to slider Pos. 90b	
56C	
3/2-36	
4	
	 90b	 Motor support /slide rail 	
56C	
3/2-36	
2	
	 90c	 Support Bracket for Pump Cartridge		
3/2-36	
1	
	 90d	 Bolt for motor slide rail Pos. 90b to base Pos. 90		
3/2-36	
4	
	 90f	 Washer for mtr. bolt Pos. 90a to slide rail Pos. 90b		
3/2-36	
4	
	 100	 Priming/Vent Plug O-ring		
3/2-36	
n	
				
3/2-36	 n	
	 100(a)	 Priming/Vent Plug O-ring (option)		
3/2-36	
n	
				
3/2-36	 n	
	 102	 O-ring for Pos. 105b Back-to-Back		
3/2-36	
1	
				
3/2-36	
1	
		
O-ring for Pos. 105b Back-to-Back (option)		
3/2-36	
1	
				
3/2-36	
1	
	 103	 Stnry Seal Ring for Pos. 105b Back-to-Back		
3/2-36	
1	
		
Stnry Seal Ring for Pos. 105b Back-to-Back (opt.)		
3/2-36	
1	
	 104	 Rotating Seal Ring for Pos. 105b Back-to-Back		
3/2-36	
1	
		
Rotating Seal Ring for Pos. 105b Back-to-Back (opt.)		
3/2-36	
1	
	 105(b)	 Shaft Seal HQBE 		
3/2-36	
***	
		
Shaft Seal HQBV		
3/2-36	
***	
		
Shaft Seal HQBK (option)		
3/2-36	
***	
		
Shaft Seal HQQE 		
3/2-36	
***	
		
Shaft Seal HQQV 		
3/2-36	
***	
		
Shaft Seal HQQF (option)		
3/2-36	
***	
		
Shaft Seal HQQK (option)		
3/2-36	
***	
		
Shaft Seal HUBE		
3/2-36	
***	
		
Shaft Seal HUBV	
3/2-36	
***	
		
Shaft Seal HUBF (option)	
3/2-36	
***	
Due to part changes over time, all position numbers
(1-203) may not be used.

ø138 x 296.6mm	
96441538		
ø138 x 332.6mm	
96441539		
ø138 x 368.6mm	
96440019		
ø138 x 404.6mm	
96441542		
ø138 x 440.6mm	
96441543		
ø138 x 476.6mm	
96440021		
ø138 x 530.6mm, 4 pole & 50 Hz.	
96440022		
ø138 x 584.6mm, 4 pole & 50 Hz.	
96440023		
ø138 x 638.6mm, 4 pole & 50 Hz.	
96439997		
Cast stainless Din 1.4408 (316C16)	
96834154	
	
H=43mm, W=196mm, ø16mm hole, 	
95922025		
CL 152mm, CI.
H=43mm, W=196mm, ø16mm hole 	
95922078		
CL 152mm, SS.
M8, ø16 x ø8.4x 1.6mm, 316 SS	
97672740		
M8x1.25-6g x45mm, 316 SS, Delta Tone/Seal	
97672731	
	
M8, NV13 x1.25-6H 316 SS, DeltaTone/Seal	
97672737		
Hex Hd.1/2 -13 UNC x 1” SAE 5, Zinc plated 			
1/2” SAE, Zinc plated			
ø136 x 3.5mm	
96439662		
ø15.85 x ø12.85 x 17.52mm	
400035	
95061339	
ø15.85 x ø12.85 x 4.5mm	
96440292		
Use with TC Pos. 47a, ø15 x ø12.7 x 7.8mm	
400016	
	
ø15 x ø13.10 x ø10.9 x 13mm	
96439668		
ø43.5 x ø34.0 x 3.6mm	
96438746		
ø13.5 x ø8.2 x 2.6mm	
96417297		
DIN 125A, 304SS, ø24 x ø13 x 2.5mm	
00ID3103		
13mm x M8	
00ID2061		
ø15.85 x 12.85 x 18.0mm	
400125	
95061443	
EPDM, ø137.5 x 3.3mm	
96438743	
97683277	
FKM, ø137.5 x 3.3mm	
96438744	
97683278	
FXM, ø137.5 x 3.3mm	
96458109	
97683279	
FFKM, ø136.12 x 3.53mm	
96466718	
97683280	
304SS, 60 x 45mm	
96439820		
304SS, ø3 x 5mm	
96022882		
Cast Stainless	
96436340		
Cast Stainless	
96456293		
Cast Stainless	
96456294		
Stainless	
96456296		
BP. Cpl. 139, L=991mm x W=305mm x	
96956336		
H=106.5mm
XLBP1 (139), L=1500mm x W=381mm x	
96956376		
H=106.5mm
Hex Head 5/16-18 UNC x .75” SAE 5, Zinc plated			
BP139, L=204mm x H=45.5mm x W=25.4mm	
96956339		
304 SS, H=74mm CL of hole, GA	
95131235		
Hex Head 1/4 -20 UNC x 1” SAE 5, Zinc plated			
5/16”” SAE, Zinc plated			
EPDM, ø16.3 x 2.4mm	
00ID1288		
FKM, ø16.3 x 2.4mm	
00ID2231		
FFKM, ø16.3 x 2.4mm	
96428162		
FXM, ø16.3 x 2.4mm	
96442869		
EPDM, ø18 x 2.5mm	
00ID2041		
FKM, ø17.86 x 2.62mm	
00ID2187		
FFKM, ø17.86 x 2.62mm	
96440281		
FXM, ø17.86 x 2.62mm	
96472584		
TC, 12mm	
980190		
SiC,12mm	
980746		
TC, 12mm	
980163		
SiC, 12mm	
980733		
SiC, Carbon with resin-impregnated, EPDM 	
96441879		
SiC, Carbon with resin-impregnated, FKM 	
96441880		
SiC, Carbon with resin-impregnated, FFKM 	
96489537		
SiC, SiC, EPDM	
96441877		
SiC, SiC, FKM	
96441878		
SiC, SiC, FXM	
96472620		
SiC, SiC, FFKM	
96464381		
TC, Carbon with resin-impregnated, EPDM 	
96441873		
TC, Carbon with resin-impregnated, FKM	
96441874		
TC, Carbon with resin-impregnated, FXM 	
96481464		

This column indicates which model uses
the spare part. If blank, the part is used in all models.

No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
YES
YES
No
No
YES
YES
YES
YES
YES
No
YES
No
YES
YES
YES
YES
No
No
No
No
No
No
YES
YES
YES
YES
No
YES
YES
YES
YES
YES
YES
YES
YES
No
No
No
YES
No
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES

B.O.M. Ref. Number is only available if it is not included in a kit or does
not have a material number listed. If it is included in a kit (YES), or has a
material number, request one of these numbers. If not included in a kit
(No), but has a Material Number, use Material Number.

5

Parts List & Kits CRN1s-H
Pos.
No.

Part Description

Model Stages

No.
Used

Comments/Dimensions

B.O.M.
Ref. No.

Material
No.

Included
in kits ?

parts list
	 105(b)	 Shaft Seal HUBK (option)	
		
Shaft Seal HUUE	
		
Shaft Seal HUUV	
		
Shaft Seal HUUF (option)	
		
Shaft Seal HUUK (option)	
	 105b	 Shaft Seal/inboard for Back-to-Back OQQE	
		
Shaft Seal/inboard for Back-to-Back OQQV	
		
Shaft Seal/inboard for Back-to-Back OUUE	
		
Shaft Seal/inboard for Back-to-Back OUUV	
	 107	 O-ring for Pos. 105b Back-to-Back	
			
		
O-ring for Pos. 105b Back-to-Back (option)	
			
	 108	 Spring for Pos. 105b Back-to-Back	
	 109(a)	 O-ring for Shaft Seal Pos. 105	
			
	 109b	 O-ring for Shaft Seal Pos. 105 (option)	
			
	 111	 Seal Driver (small) for Pos. 105b Back-to-Back	
	 112	 Seal Driver (large) for Pos. 105b Back-to-Back	
	 112a	 Seal Drv threaded for 112, Pos. 105b Back-to-Back	
	 113	 Set Screw for 112a, for Pos. 105b Back-to-Back	
	 117	 Air Vent Pipe for 118	
	 117a	 Counter Nut for Pipe 117	
	 118	 Air Vent	
	 146	 Allen Bolt for 147/148, for Pos. 105b Back-to-Back	
	 147	 Stationary Seal Retainer - Pos. 105b Back-to-Back	
	 148	 Seal Retainer Washer - Pos. 105b Back-to-Back	
	 149	 Connecting Pipe for Cool Top®	
			
	 149a	 Retainer for bushing	
	 149b	 Bushing	
	 149c	 Connecting Pipe less 109a&b and 149a&b	
	 201	 Flange, Suction, Cast Iron	
	
	
	
	
	
Flange, Suction, Stainless Steel option for GI	
	
	
	
	 201a	 Flange, Discharge, Cast Iron	
	
	
	
	
	
Flange, Discharge, Stainless Steel option for GI	
	
	
	
	 203	 Retaining ring for Pos. 201,  1.5” flange	
	 203a	 Retaining ring for Pos. 201a,  1.0” flange	
Due to part changes over time, all position numbers
(1-203) may not be used.

3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-36	
3/2-17	
3/2-36	
3/2-17	
3/2-36	
3/2-17	
3/2-36	
3/2-17	
3/2-36	
3/2-36	
3/2-36	

***	
TC, Carbon with resin-impregnated, FFKM 	
***	
TC, TC, EPDM	
***	
TC, TC, FKM	
***	
TC, TC, FXM	
***	
TC, TC, FFKM	
1	
SiC, SiC, EPDM	
1	
SiC, SiC, FKM	
1	
TC, TC, EPDM	
1	
TC, TC, FKM	
1	
EPDM, ø11.5 x 4.3mm	
1	
FKM, ø11.5 x 4.3mm	
1	
FFKM, ø11.5 x 4.3mm	
1	
FXM, ø11.5 x 3.18mm	
1	
12mm	
1	
EPDM, ø21.3 x 3.0mm	
1	
FKM, ø21.2 x 3.0mm	
1	
FXM, ø22 x 2.75mm	
1	
FFKM, ø23.47 x 2.62mm	
1		
1		
1		
1	
3mm x M5 x 6mm	
1	
G1/2, 316SS, 60 x 43mm	
1	
NV24, internal G1/2, 316SS	
1	
Air vent type 1511-AV - 5/6430	
1	
2.5mm x M3 x 5mm	
1	
NV36, 316SS	
1	
316SS, ø36.0 x ø21.6 x 5.0mm	
1	
NV36, 316SS, FXM & EPDM	
1	
NV36, 316SS, FXM & FKM	
1	
316SS, ø22.0 x ø17.0 x 9mm	
1	
Graflon®,  ø21..2 x ø12.4 x 53mm	
1	
NV36, 316SS	
1	
1.5” 150#, 4x1/2”-13 UNC threaded flg., e-coat	
1	
1.5” 300#, 4 x 3/4”-10 UNC threaded flg., e-coat	
1	
1.5” 150#, 4 x 1/2”-13 UNC threaded flange	
1	
1.5” 300#, 4 x 3/4”-10 UNC threaded flange	
1	
1” 150#, 4 x 1/2”-13 UNC threaded flg., e-coat	
1	
1” 300#, 4 x 5/8”-11 UNC threaded flg., e-coat	
1	
1” 150#, 4 x 1/2”-13 UNC threaded flange	
1	
1” 300#, 4 x 3/4”-10 UNC threaded flange	
1	
Stainless, ø72.6 x 5	
1	
Stainless, ø53.6 x 3.2	

This column indicates which model uses
the spare part. If blank, the part is used in all models.

96481463		
96441875		
96441876		
96475542		
96467885		
985200		
985760		
985189	
405145	
985190	
405145	
00ID2040		
00ID2186		
96440282		
96472618		
980195		
00ID1798		
00ID2339		
96458111		
96464384		
980192		
980191		
400203		
00ID7392		
96525189		
96506709		
96427483		
96462639		
96457354		
96457355		
96460414		
96460415		
96457639		
96456297	
	
96456295		
96922828	
	
96956145	
	
97644306	
	
97644307	
	
96922827	
	
96956144	
	
97644302	
	
97644304	
	
96475395	
	
96439718	
	

YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
No
No
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
No
No
No
No
YES
YES
YES
No
No
No
No
No
No
No
No
No
No

B.O.M. Ref. Number is only available if it is not included in a kit or does
not have a material number listed. If it is included in a kit (YES), or has a
material number, request one of these numbers. If not included in a kit
(No), but has a Material Number, use Material Number.

Notes on next page...

6

Parts List & Kits CRN1s-H

Notes:

The first number is total number if impellers.  An exception to this format is the CRN1s2H.
Example: a CRN1s-2H is actually a CRN1s-3/2H, it has 3 chambers and
2 impellers (de-staged by 1) - it uses a 3 stage shaft.
^^^

^^^^

3/2 to 9 stage = # of Stages less 2
10 to 19 stage = # of stages less 3
21 to 27 stage = # of stages less 4
29 to 36 stage = # of stages less 5
Exception: When de-staging pump by 2 impellers, replace top chamber
Pos. 4 with Pos. 5a
3/2 to 9 stage = use 1
10 to 19 stage = use2
21 to 27 stage = use 3
29 to 36 stage = use 4

*
**
***

Standard use 1. Back-to-Back or Tandem pump version use 3
Standard use 1. Back-to-Back or Tandem pump version use 3
1 used in Hxxx (Standard), 2 used in Pxxx (Tandem) pump version



Standard use 2. Back-to-Back or Tandem pump version use 3



Standard use 2. Back-to-Back or Tandem pump version use 6

1*

Standard use 1. When de-staging pump by 2 impellers, replace top chamber
Pos. 4 with an additional Pos. 5a

Key to Symbols:
KITS
Ø
ANSI
CPL

.......
.......
.......
.......

EPDM .......
FFKM
FKM
FXM
M

.......
.......
.......
.......

mm
MG
N
NBR

.......
.......
.......
.......

NEMA
PTFE
SiC
TC
UNC

.......
.......
.......
.......
.......

Recommended spare part
Diameter
American National Standards Institute
Complete Assembly – these parts consist of more than one
component
Ethylene Propylene (also kNown as EPR and EPT) – an elastic
substance similar to rubber
Kalrez Elastomer made by DuPont
Fluoro Elastomer (generic for Viton)
Fluoraz Elastomer made by Greene Tweed
International standard thread size designation (thread
diameter in mm)
Millimeter
Identifies Grundfos motor type/size
Stainless
Buna - N (also kNown as Nitrile) – an elastic substance similar
to rubber
National Electrical Manufacturers Association
Teflon
Silicon Carbide
Tungsten Carbide
Unified National Coarse – a standard for threads on bolts

Cool Top® is a registered trademark of Grundfos Pumps

7

Spare Part Kits CRN1s-H
Spare Part Kits
Since certain pump parts can be expected to exhibit wear at the same time as related pump parts, they have been grouped into the
following kits for your convenience. The numbers indicate the quantity of the part within each kit. Please order these kits using the
kit material number at the top of the columns.
CR(I, N)1S, 1, & 3 SiC Bearing
WEAR PARTS KIT 2-9
WEAR PARTS KIT 10-19
WEAR PARTS KIT 20-27
WEAR PARTS KIT 28-36
Pos. No.
Description
4a
Chamber N Cpl. w/Pos.45 & 65 & SiC Bearing
39
Gasket for Oval Flange, 95 x 55 x ø35 x 2mm
45
Neck Ring, ø41.3 x ø30.6 x .75mm, PTFE
47a
Bearing Ring/Spacer, SiC 150, 13mm
64a
Spacing Pipe, ø15.85 x ø12.85 x 4.5mm
64c
Clamp, Splined, ø15 x ø13.10 x ø10.9 x 13mm
65
Neck Ring Retainer, N, ø43.5 x ø34.0 x 3.6mm
66
Lock Washer Set of 2, ø13.5 x ø8.2 x 2.6mm
67
Lock Nut, 13mm x M8

Kit No.
Kit No.
Kit No.
Kit No.
Material No.
96439476
400189
400003
96437488
96440292
96439668
96438746
96417297
00ID2061

96455095

CR(I, N )1S, 1, & 3 Graflon Bearing
WEAR PARTS KIT 2-9
WEAR PARTS KIT 10-19
WEAR PARTS KIT 20-27
WEAR PARTS KIT 28-36
Pos. No.
Description
4a
Chamber N Cpl. w/Pos.45 & 65 & Graflon Brg.
39
Gasket for Oval Flange, 95 x 55 x ø35 x 2mm
45
Neck Ring, ø41.3 x ø30.6 x .75mm, PTFE
47a
Bearing Ring/Spacer, TC, 9.7mm
64a
Spacing Pipe, ø15.85 x ø12.85 x 7.8mm
64c
Clamp, Splined, ø15 x ø13.10 x ø10.9 x 13mm
65
Neck Ring Retainer, N, ø43.5 x ø34.0 x 3.6mm
66
Lock Washer Set of 2, ø13.5 x ø8.2 x 2.6mm
67
Lock Nut, 13mm x M8

Kit No.
Kit No.
Kit No.
Kit No.
Material No.
96440615
400189
400003
400041
400016
96439668
96438746
96417297
00ID2061

96460140

Kit No.
Kit No.
Kit No.
Kit No.
Kit No.
Kit No.
Kit No.
Material No.
96441879
96489537
96441880
96441877
96472620
96498109
96441878
370711
370712

96455088

Kit No.
Kit No.
Kit No.
Kit No.
Kit No.
Kit No.
Kit No.
Kit No.
Material No.
96441873
96481464
96481463
96441874
96441875
96475542
96498108
96441876
370711
370712

96455082

STANDARD SHAFT SEAL KIT, BALANCED CARTRIDGE
(Maximum allowed working PSI is 435)
(Tandem Seal option Pumps require 2 of each Seal Kit)

Pos. No.
105

N/A
N/A

Description
HQBE
HQBK
HQBV
HQQE
HQQF
HQQK
HQQV
Grinding Device Tool for Emery Cloth
Emery Cloth

OPTIONAL SHAFT SEAL KIT, BALANCED CARTRIDGE
(Maximum allowed working PSI is 435)
(Tandem Seal option Pumps require 2 of each Seal Kit)

Pos. No.
105

N/A
N/A

8

Description
HUBE
HUBF
HUBK
HUBV
HUUE
HUUF
HUUK
HUUV
Grinding Device Tool for Emery Cloth
Emery Cloth

STACK KITS
Model
Material No.
CRN1S-3/2
96479078
CRN1S-3
96479079
CRN1S-4
96479080
CRN1S-5
96479081
CRN1S-6
96479082
CRN1S-7
96479083
CRN1S-8
96479084
CRN1S-9
96479085
CRN1S-10
96479086
CRN1S-11
96479087
CRN1S-12
96479088
CRN1S-13
96479089
CRN1S-15
96479090
CRN1S-17
96479091
CRN1S-19
96479092
CRN1S-21
96479093
CRN1S-23
96479094
CRN1S-25
96479095
CRN1S-27
96479096
*** CRN1S-30
96479097
*** CRN1S-33
96479098
*** CRN1S-36
96479099
***For 4 pole & 50 Hz operation only.

96455092
96455093
96455094
1
2
8
1
1
1
8
1
1

Qty. Included in each Kit
2
3
2
2
17
24
2
3
2
3
1
1
17
24
1
1
1
1

4
2
32
4
4
1
32
1
1

96455110
96455111
96455112
1
2
8
1
1
1
8
1
1

Qty. Included in each Kit
2
3
2
2
17
24
2
3
2
3
1
1
17
24
1
1
1
1

4
2
32
4
4
1
32
1
1

96491375
96455089
96455086
96533327
96533326
96455087
Qty. Included in each Kit
1
1
1
1
1
1
1
1

1
1

1
1

1
1

1
1

1
1

1
1
1

96533323
96533322
96455083
96455084
96533325
96533324
96455085
Qty. Included in each Kit
1
1
1
1
1
1
1
1
1

1
1

1
1

1
1

1
1

1
1

1
1

1
1
1

Spare Part Kits CRN1s-H
Spare Part Kits (continued)
INBOARD SHAFT SEAL & Gasket KIT, Back to Back OQQE
Kit No.
INBOARD SHAFT SEAL & Gasket KIT, Back to Back OQQV
Kit No.
INBOARD SHAFT SEAL & Gasket KIT, Back to Back OQQV
Kit No.
INBOARD SHAFT SEAL & Gasket KIT, Back to Back OQQK
Kit No.
INBOARD SHAFT SEAL & Gasket KIT, Back to Back OUUE/V
Kit No.
(An HQQx or HUUx seal kit must also be used for respectively to complete seal repairs)
Pos. No.

Description

37

96533360
96533361
96989183
96536168
405145

Material No.

Qty. Included in each Kit

Sleeve O-ring, EPDM, ø137.5 x 3.3mm
Sleeve O-ring, FKM, ø137.5 x 3.3mm
38, 100(a) Drain Plug O-ring, EPDM, Ø16.3 x 2.4mm
Drain Plug O-ring, FKM, Ø16.3 x 2.4mm
102
O-ring, EPDM, ø18 x 2.5mm
O-ring, FKM, ø17.86 x 2.62mm
O-ring, FFKM, ø17.86 x 2.62mm
103
Stationary Seal Ring, SiC,12mm
Stationary Seal Ring, TC,12mm
104
Rotating Seal Ring, SiC, 12mm
Rotating Seal Ring, TC, 12mm
107
O-ring, EPDM, ø11.5 x 4.3mm
O-ring, FKM, ø11.5 x 4.3mm
O-ring, FFKM, ø11.5 x 4.3mm
108
Spring, 12mm
109a
O-ring, EPDM, ø21.3 x 3.0mm
O-ring, FKM, ø21.2 x 3.0mm
O-ring, FFKM, ø23.47 x 2.62mm
111
Driver for pos.104
112
Driver for pos.111
112a
Driver for pos.112
113
Set Screw for pos.112a
146
Allen Bolt for pos.147 & 148, 2.5mm x M3 x 5mm
147
Stationary Seal Retainer - NV36, 316SS
148
Seal Retainer Washer -316SS, ø36.0 x ø21.6 x 5.0mm
N/A
Grinding Device Tool for Emery Cloth
N/A
Emery Cloth

96438743
96438744
00ID1288
00ID2231
00ID2041
00ID2187
96440281
980746
980190
980733
989163
00ID2040
00ID2186
96440282
980195
00ID1798
00ID2339
96464384
980192
980191
400203
00ID7392
96462639
96457354
96457355
370711
370712

GASKET KIT (EPDM)
GASKET KIT (FKM)
GASKET KIT (FXM)
GASKET KIT (FFKM)
GASKET KIT (EPDM)-Double Seal option.
GASKET KIT (FKM)-Double Seal option.
GASKET KIT (FFKM)-Double Seal option.
GASKET KIT (FXM, & EPDM)- Cool-Top option
Pos. No.
Description
37
Sleeve O-ring, EPDM, ø137.5 x 3.3mm
Sleeve O-ring, FKM, ø137.5 x 3.3mm
37b
Sleeve O-ring, FXM, ø137.5 x 3.3mm
Sleeve O-ring, FFKM, ø136.12 x 3.53mm
38, 100(a) Drain Plug O-ring, EPDM, Ø16.3 x 2.4mm
Drain Plug O-ring, FKM, Ø16.3 x 2.4mm
38, 100a Drain Plug O-ring, FXM, ø16.3 x 2.4mm
Drain Plug O-ring, FFKM, ø16.3 x 2.4mm
109(a)
O-ring for Pos.105(b) &149, EPDM, Ø21.3 x 3.0mm
O-ring for Pos.105(b) &149, FKM, Ø21.2 x 3.0mm
109b
O-ring for Pos.105(b) &149, FXM, Ø22.0 x 2.75mm
O-ring for Pos.105(b) &149, FFKM, Ø23.47 x 2.62mm

Kit No.
Kit No.
Kit No.
Kit No.
Kit No.
Kit No.
Kit No.
Kit No.
Material No.
96438743
96438744
96458109
96466718
00ID1288
00ID2231
96442869
96428162
00ID1798
00ID2339
96458111
96464384

96455090

Kit No.
Kit No.
Kit No.
Kit No.
Material No.
97644314
97672715
97672716
97672717

97683277

Kit No.
Kit No.
Kit No.
Material No.
00ID7899
00ID7900
00ID7901
310192
410108
410109
96472175

415314

Add to above standard gaskets to complete desired CRH, CRNH model

Kit, O-ring EPDM CRN-H1s to 5
Kit, O-ring FKM CRN-H1s to 5
Kit, O-ring FXM CRN-H1s to 5
Kit, O-ring FFKM CRN-H1s to 5
Description
Pos. No.
O-ring EPDM ø145.6x3.5mm 2-256
72a
O-ring FKM ø145.6x3.5mm 2-256
O-ring FXM ø145.6x3.5 2-256
O-ring FFKM ø145.6x3.5mm 2-256

3
3
7
7
1
1

1
1

1
1

1
1
1

1

1

1

1

1

1

1

1

1
1
1
2
3

1
1
1
2
3
1
1

1
1
1
1

1
1
1
1
1
1
2
3

1
1
1
1
1
1
2
3
1
1
1
1

1

1
1

96455091
96463944
96533328
96533362
96533363
96533364
96533329
Qty. Included in each Kit
3

2
2

1
3

2

2
2

3

3
7

3

4
7

3

3
3

1

7
1

1

1
1

2
1

2

97683278
97683279
97683280
Qty. Included in each Kit
1
1
1
1

NEMA COUPLING KIT

Pos. No.
9

10
10a

ø15.8/ø12
ø28.5/ø12
ø34.9/ø12
Description
Allen Screw, M6 x 20mm, Delta Seal
Allen Screw, M8 x 25mm, Delta Seal
Allen Screw, M10 x 25mm, Delta Seal
Shaft Pin, ø5 x 26mm, Stainless
Coupling Half, 56C, 1/3 - 2HP. ø15.8 / ø12
Coupling Half, 182/184TC, 3-5HP. ø28.5/ø12
Coupling Half, 213TC, 7.5-10HP. ø34.9/ø12

415315
96478700
Qty. Included in each Kit
4

1
2

4

4

1

1

2
2

9

Spare Part Kits • Accessories CRN1s-H
Spare Part Kits (continued)
COUPLING GUARD KIT
NEMA 56C, 1/3-2HP
NEMA 182-215TC, 3 -10HP
Pos. No.
Description
7
Coupling Guard, W=127mm x H=90.5mm
Coupling Guard, W=157mm x H=171mm
7a
Screw comb.slot torx/straight slot 4 x 8mm

Kit No.
96505131
Kit No.
96505132
Material No. Qty. Included in each Kit
96438137
2
96438138
2
96488481
4
4

Air Vent Kit - Horizontal Units
CR-H, CRN-H1S to 20

Kit No.

91136720

Description
Air Vent Pipe, short for 118, G1/2 , 60x43
Counter Nut for Pipe 117, G1/2
Air vent type 1511-AV - 5/6430

Material No.
96525189
96506709
96427483

Qty. Included in each Kit
1
2
1

Connecting Pipe for Cool Top
(EPDM, FKM & FXM)
Pos. No.
Description
109a
O-ring for Pos.105(b) &149, EPDM, Ø21.3 x 3.0mm
O-ring for Pos.105(b) &149, FKM, Ø21.2 x 3.0mm
109b
O-ring for Pos.105(b) &149, FXM, Ø22.0 x 2.75mm
149a
Retainer for bushing, 316SS, ø22.0 x ø17.0 x 9mm
149b
Bushing, Graflon®, ø21..2 x ø12.4 x 53mm
149c
Connecting pipe, NV36, 316SS

Kit No.
Material No.
00ID1798
00ID2339
96458111
96457639
96456297
96456295

96578704
Qty. Included in each Kit
1
1
1
1
1
1

ANSI COMPANION FLANGES FOR CR-H, CRN-H1S to 20
1-1/2" and 1" Threaded Stainless, 150 Lb. Class
Pos. No.
Description
N/A
Hex Head Cap Screw/Bolt 1/2"-13X 2" 316SS
N/A
Flange ANSI #150 1.5" NPT 316SS
N/A
Flange ANSI #150 1" NPT 316SS
N/A
Gasket 1 1/2" Full Face 150 Lb. ANSI
N/A
Gasket 1" Full Face 150 Lb. ANSI

Kit No.
Material No.
97743748
96983498
96983497
97694409
97692916

97698645
Qty. Included in each Kit
8
1
1
1
1

ANSI COMPANION FLANGES FOR SMALL CR
1-1/2" and 1" Threaded Stainless, 300 Lb. Class
Pos. No.
Description
N/A
Hex Head Cap Screw/Bolt 3/4"-10 X 2.5" 316SS
N/A
Hex Head Cap Screw/Bolt 5/8"-11 X 2.25" 316SS
N/A
Flange ANSI #300 1.5" NPT 316SS
N/A
Flange ANSI #300 1"NPT 316SS
N/A
Gasket 1 1/2" Full Face 300 Lb. ANSI
N/A
Gasket 1" Full Face 300 Lb. ANSI

Kit No.
Material No.
91143035
91143029
96983496
96983495
97694408
97694407

97698646
Qty. Included in each Kit
4
4
1
1
1
1

Pos. No.
117
117a
118

Accessories

Baseplate Kit
139
56C for GA
Kit No.
97534517
182TC for GA
Kit No.
97534518
XLBP1
56C for GA
Kit No.
97534573
182TC for GA
Kit No.
Material No.
Qty. Included in each Kit
Pos. No.
Description
90
Baseplate Cpl. 139, L=991* x W=305* x H=106.5*
96956336
1
1
96956376
1
Baseplate Cpl. XLBP1, L=1500* x W=305* x H=106.5*
N/A
Slider & fastners for 56C(consists of slider & hardware)
96983855
1
1
N/A
Slider & fastner for 182TC (consists of slider & hardware)
96983858
1
N/A
Hardware Kit -96983855/68/78(cont. pos.56f, g, 90a,d& f)**
97501470
1
1
N/A
Hardware Kit -96983858 (cont. pos.56f & g, 90a, d & f)**
97501481
1
56f
Bolt, Hex Head 1/2 -13 UNC x 1" SAE 5, Zinc plated
N/A
2
2
2
Washer, 1/2" SAE, Zinc plated
N/A
2
2
2
56g
N/A
4
4
90a
Bolt, Hex Head 5/16 -18 UNC x .75" SAE 5, Zinc plated
N/A
4
Bolt, Hex Head 3/8 -16 UNC x .5" SAE 5, Zinc plated
90b
Slider, GA/B/C 56C/139BP, L=204* x H=45.5* x W=25.4*
96956339
2
2
Slider, GA/B/C 182TC/139 BP, L=230* x H=23* x W=25.4*
96956338
2
90d
Bolt, Hex Head 1/4 -20 UNC x 1" SAE 5, Zinc plated
N/A
4
4
N/A
4
Bolt, Hex Head 1/4 -20 UNC x 1.75" SAE 5, Zinc plated
N/A
4
4
90f
Washer, 5/16" SAE, Zinc plated
N/A
4
Washer, 3/8" SAE, Zinc plated
* Values in mm, Length (L) is +/- 2mm, Height (H) is +/- 1mm, Width (W). ** Hardware kits 97501470 and 81 are also available for sale.

10

97534574
1
1
1
2
2
4
2
4
4

Spare Part Kits • Special Tools CRN1s-H
Special Tools

Tools not generally available from normal sources.

Mat. No.	

	
	00SV0040	
		

Description and Use
Shaft Holder for Dismantling/Assembly
Used to hold and protect the shaft during dismantling and assembly.

	00SV2007	
		
		

Tubular Box Spanner for Shaft Seal 36.1 mm
Used to install and remove the shaft seal.
Fits a 1/2” drive ratchet.

	00SV0239	
		

Puller for Neck Ring
Used to remove the Neck Ring from Chamber.

	00SV2014	
		

Circlip Pliers for Flange Lock Ring
Used to remove the Lock Ring for the Flange.

	00SV2066	
		

Tool for Outer Sleeve
Used to press sleeve into base.

	00SV2011	
		

Bit Holder
Used with Bits Kit, 1/4”

	00SV2010	
		
		
		

Bits Kit
NV 5 mm for M6, 1/4”
NV 6 mm for M8, 1/4”
NV 8 mm for M10, 1/4”

	00SV2012	
		
		

Hexagon Socket Bit
Used for Shaft Seal
NV 2.5 mm for M5, 1/4”

(optional)

Standard Tools

In addition to being available from Grundfos, comparable tools can be purchased through normal sources.

Mat. No.	

Description and Use

		
		
	 00SV0083	
	 00SV0055	
	 00SV0056	
	 00SV0054	
	 00SV0122	

Wrenches
Used to tighten various nuts.
NV 10 mm for M6
NV 13 mm for M8
NV 17 mm for M10
NV 19 mm for M12
NV 24 mm for M16

	 	
		
	 00SV0292	
	 00SV0269	
	 00SV0400	

Torque Wrench
Used to torque various screws.
4-20 Nm, 9 x 12
20-100 Nm, 9 x 12
40-200 Nm, 14x18

	 	
		
	 00SV0438	

Torque Screwdriver
Used to tighten various nuts.
1-6 Nm, 1/4”

	 	
	 00SV0295	

Ratchet Spanner for all Adapters
9 mm x 12 mm, 1/2”

	
	
	
	

	
00SV0296	
00SV0297	
00SV0298	

Socket Spanner with Inside Hex
NV 5 mm for M6, 1/2” x 1/2”
NV 6 mm for M8, 1/2” x 1/2”
NV 8 mm for M10, 1/2” x 1/2”

	
	
	
	
	
	

	
00SV0310	
00SV0294	
00SV0270	
00SV0271	
00SV0524	

Ring Spanner
NV 10 mm for M6
NV 13 mm for M8
NV 17 mm for M10
NV 19 mm for M12
NV 24 mm for M16

	 	
	 00SV2013	

Socket Spanner
NV 13 mm for M8, 9 x 12	

11

L-CR-SM-060 0613
The name Grundfos, the Grundfos logo, and be think innovate are registered trademarks owned by Grundfos Holding A/S, Denmark. All rights reserved worldwide. © Copyright Grundfos Holding A/S

GRUNDFOS Pumps Corporation
17100 W. 118th Terrace
Olathe, Kansas 66062
Phone: 913.227.3400
Fax: 913.227.3500
www.grundfos.us

GRUNDFOS Canada, Inc.
2941 Brighton Road
Oakville, Ontario L6H 6C9 Canada
Phone: 905.829.9533
Fax: 905.829.9512

Bombas GRUNDFOS de Mexico S.A. de C.V.
Boulevard TLC No. 15
Parque Industrial Stiva Aeropuerto
Apodaca, N.L. Mexico 66600
Phone: 52.81.8144.4000
Fax: 52.81.8144.4010



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2013:06:20 10:27:16-07:00
Creator                         : Adobe InDesign CS5 (7.0)
Modify Date                     : 2017:02:17 09:39:51-05:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2017:02:17 09:39:51-05:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 10129 bytes, use -b option to extract), (Binary data 11421 bytes, use -b option to extract)
Instance ID                     : uuid:87dc5322-fe76-4fe6-b16d-0a4b90db39ce
Document ID                     : xmp.did:4399A179887EE1118199A0F46FE67E43
Original Document ID            : xmp.did:4399A179887EE1118199A0F46FE67E43
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:4399A179887EE1118199A0F46FE67E43, xmp.iid:FE7D9844897EE1118199A0F46FE67E43, xmp.iid:FF7D9844897EE1118199A0F46FE67E43, xmp.iid:00F574C98B7EE1118199A0F46FE67E43, xmp.iid:01F574C98B7EE1118199A0F46FE67E43, xmp.iid:715A44688C7EE1118199A0F46FE67E43, xmp.iid:39626F888C7EE1118199A0F46FE67E43, xmp.iid:8BE070DC8C7EE1118199A0F46FE67E43, xmp.iid:A5EFFB618D7EE1118199A0F46FE67E43, xmp.iid:B282EC758D7EE1118199A0F46FE67E43, xmp.iid:4DF2A4BF997EE1118199A0F46FE67E43, xmp.iid:990201059B7EE1118199A0F46FE67E43, xmp.iid:106065919C7EE1118199A0F46FE67E43, xmp.iid:116065919C7EE1118199A0F46FE67E43, xmp.iid:CE1D55099D7EE1118199A0F46FE67E43, xmp.iid:7AE259099D7EE1118199A0F46FE67E43, xmp.iid:7BE259099D7EE1118199A0F46FE67E43, xmp.iid:7CE259099D7EE1118199A0F46FE67E43, xmp.iid:7DE259099D7EE1118199A0F46FE67E43, xmp.iid:3F34A199A47EE1118199A0F46FE67E43, xmp.iid:3B4175D83B7FE1119B21C1C173B3D826, xmp.iid:06507BAD87A3E111B0A287EA507E7050, xmp.iid:B40E5A718AA3E111B0A287EA507E7050, xmp.iid:B50E5A718AA3E111B0A287EA507E7050, xmp.iid:34FB0DB88BA3E111B0A287EA507E7050, xmp.iid:7E1BFEE18BA3E111B0A287EA507E7050, xmp.iid:E9AAC7578FA3E111B0A287EA507E7050, xmp.iid:6B4B928B8FA3E111B0A287EA507E7050, xmp.iid:DE0EAE948FA3E111B0A287EA507E7050, xmp.iid:9767E3F523A4E111893DC49DCB62F4B3, xmp.iid:778B047225A4E111893DC49DCB62F4B3, xmp.iid:7EA96ACE2AA4E111893DC49DCB62F4B3, xmp.iid:0B6FD6082CA4E111893DC49DCB62F4B3, xmp.iid:19E0CC962CA4E111893DC49DCB62F4B3, xmp.iid:E56E33152FA4E111893DC49DCB62F4B3, xmp.iid:E094F3A435A4E111893DC49DCB62F4B3, xmp.iid:061E27B63DA4E111893DC49DCB62F4B3, xmp.iid:813FFC3E3FA4E111893DC49DCB62F4B3, xmp.iid:D7F6641C40A4E111893DC49DCB62F4B3, xmp.iid:D8F6641C40A4E111893DC49DCB62F4B3, xmp.iid:D9F6641C40A4E111893DC49DCB62F4B3, xmp.iid:AA52C1F849A4E111893DC49DCB62F4B3, xmp.iid:AB52C1F849A4E111893DC49DCB62F4B3, xmp.iid:AC52C1F849A4E111893DC49DCB62F4B3, xmp.iid:55D2E7C401A5E111B3A1B6376D55DFEE, xmp.iid:B14ACACB17A5E111B3A1B6376D55DFEE, xmp.iid:7B877203D3A5E1118C47B496892B8FE3, xmp.iid:991E0475EEA5E1118C47B496892B8FE3, xmp.iid:B1B08B5981A6E1119B74F0061B225BD7, xmp.iid:81B7715894A6E1118DEEFC3C1484C02C, xmp.iid:B0C4BBAF9AB5E111AB21A6A9281C32A8, xmp.iid:B1C4BBAF9AB5E111AB21A6A9281C32A8, xmp.iid:B2C4BBAF9AB5E111AB21A6A9281C32A8, xmp.iid:B3C4BBAF9AB5E111AB21A6A9281C32A8, xmp.iid:9F0232EF9EB5E111AB21A6A9281C32A8, xmp.iid:383271339FB5E111AB21A6A9281C32A8, xmp.iid:6C852794A1B5E111AB21A6A9281C32A8, xmp.iid:7EA2CDEA36B6E111A78A80C81AB97AEF, xmp.iid:7FA2CDEA36B6E111A78A80C81AB97AEF, xmp.iid:9604BFBA3DB6E111A78A80C81AB97AEF, xmp.iid:A0B8DBA942B6E111A78A80C81AB97AEF, xmp.iid:4F34D21B46B6E111A78A80C81AB97AEF, xmp.iid:C586708846B6E111A78A80C81AB97AEF, xmp.iid:C686708846B6E111A78A80C81AB97AEF, xmp.iid:C786708846B6E111A78A80C81AB97AEF, xmp.iid:C557189A4AB6E111A78A80C81AB97AEF, xmp.iid:75CD37F14AB6E111A78A80C81AB97AEF, xmp.iid:0EA5A8C84DB6E111A78A80C81AB97AEF, xmp.iid:CD3532116EB6E11194338BDA77DDB582, xmp.iid:88CD126F6EB6E11194338BDA77DDB582, xmp.iid:17F0D0D177D6E1118840842EC9D508FD, xmp.iid:18F0D0D177D6E1118840842EC9D508FD, xmp.iid:1D29D34F10EBE111801DC493644CE32F, xmp.iid:3998777C1BEBE111BB38C5841FE44C6F, xmp.iid:D40F220CA9EBE111A21886BFD3DFFFFB, xmp.iid:D50F220CA9EBE111A21886BFD3DFFFFB, xmp.iid:30D70849A9EBE111A21886BFD3DFFFFB, xmp.iid:431F8DB4D0EBE11198BDBF77AADFFE44, xmp.iid:C9ABCF7E45D8E211B132A1E53280DF16, xmp.iid:CAABCF7E45D8E211B132A1E53280DF16, xmp.iid:FAE05AB645D8E211B132A1E53280DF16, xmp.iid:60635EB645D8E211B132A1E53280DF16, xmp.iid:61635EB645D8E211B132A1E53280DF16, xmp.iid:62635EB645D8E211B132A1E53280DF16, xmp.iid:63635EB645D8E211B132A1E53280DF16, xmp.iid:64635EB645D8E211B132A1E53280DF16, xmp.iid:65635EB645D8E211B132A1E53280DF16, xmp.iid:66635EB645D8E211B132A1E53280DF16, xmp.iid:67635EB645D8E211B132A1E53280DF16, xmp.iid:68635EB645D8E211B132A1E53280DF16, xmp.iid:D277256CCED9E211AC9A84C159A369A1, xmp.iid:D377256CCED9E211AC9A84C159A369A1
History When                    : 2012:04:04 12:04:24-07:00, 2012:04:04 12:06:22-07:00, 2012:04:04 12:06:22-07:00, 2012:04:04 12:24:24-07:00, 2012:04:04 12:24:24-07:00, 2012:04:04 12:28:50-07:00, 2012:04:04 12:29:44-07:00, 2012:04:04 12:32:05-07:00, 2012:04:04 12:35:49-07:00, 2012:04:04 12:36:23-07:00, 2012:04:04 14:04:20-07:00, 2012:04:04 14:13:26-07:00, 2012:04:04 14:24:31-07:00, 2012:04:04 14:24:31-07:00, 2012:04:04 14:27:52-07:00, 2012:04:04 14:27:52-07:00, 2012:04:04 14:39:24-07:00, 2012:04:04 14:39:24-07:00, 2012:04:04 14:39:52-07:00, 2012:04:04 15:22:01-07:00, 2012:04:05 09:24:40-07:00, 2012:05:21 13:58:12-07:00, 2012:05:21 14:18-07:00, 2012:05:21 14:18-07:00, 2012:05:21 14:27:08-07:00, 2012:05:21 14:28:18-07:00, 2012:05:21 14:53:04-07:00, 2012:05:21 14:54:31-07:00, 2012:05:21 14:54:46-07:00, 2012:05:22 08:36:55-07:00, 2012:05:22 08:47:33-07:00, 2012:05:22 09:25:55-07:00, 2012:05:22 09:34:43-07:00, 2012:05:22 09:38:41-07:00, 2012:05:22 09:56:32-07:00, 2012:05:22 10:43:30-07:00, 2012:05:22 11:41:15-07:00, 2012:05:22 11:52:14-07:00, 2012:05:22 11:58:25-07:00, 2012:05:22 12:32:09-07:00, 2012:05:22 12:40:18-07:00, 2012:05:22 13:09:01-07:00, 2012:05:22 13:13:05-07:00, 2012:05:22 13:26:05-07:00, 2012:05:23 11:04:41-07:00, 2012:05:23 13:42:21-07:00, 2012:05:24 12:02:31-07:00, 2012:05:24 15:18:58-07:00, 2012:05:25 08:50:28-07:00, 2012:05:25 11:06:26-07:00, 2012:06:13 13:59:37-07:00, 2012:06:13 13:59:37-07:00, 2012:06:13 14:04:15-07:00, 2012:06:13 14:14:03-07:00, 2012:06:13 14:30:02-07:00, 2012:06:13 14:31:56-07:00, 2012:06:13 14:48:57-07:00, 2012:06:14 08:37:58-07:00, 2012:06:14 08:37:58-07:00, 2012:06:14 09:26:44-07:00, 2012:06:14 10:02:03-07:00, 2012:06:14 10:26:42-07:00, 2012:06:14 10:29:45-07:00, 2012:06:14 10:42:41-07:00, 2012:06:14 10:42:41-07:00, 2012:06:14 10:58:52-07:00, 2012:06:14 11:01:18-07:00, 2012:06:14 11:21:39-07:00, 2012:06:14 15:12:44-07:00, 2012:06:14 15:15:22-07:00, 2012:07:25 09:43:10-07:00, 2012:07:25 09:43:10-07:00, 2012:08:20 14:45:08-07:00, 2012:08:20 16:05:08-07:00, 2012:08:21 08:58:28-07:00, 2012:08:21 08:58:28-07:00, 2012:08:21 09:00:10-07:00, 2012:08:21 13:42:21-07:00, 2013:06:18 11:32:56-07:00, 2013:06:18 11:32:56-07:00, 2013:06:18 11:34:29-07:00, 2013:06:18 11:34:29-07:00, 2013:06:18 11:34:57-07:00, 2013:06:18 11:34:57-07:00, 2013:06:18 11:48:27-07:00, 2013:06:18 11:48:27-07:00, 2013:06:18 11:49:09-07:00, 2013:06:18 11:49:09-07:00, 2013:06:18 11:49:48-07:00, 2013:06:18 11:50:41-07:00, 2013:06:20 10:25:37-07:00, 2013:06:20 10:25:37-07:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata
Doc Change Count                : 1808
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 12
EXIF Metadata provided by EXIF.tools

Navigation menu