549877 2 A.Y. Mc Donald 81000 Series Shallow Well Jet Pumps Specifications
549883 2 A.Y. Mcdonald 8100Hp Series Shallow Well Jet Pump Specifications 549883_2_A.Y. McDonald 8100HP Series Shallow Well Jet Pump Specifications 549883_2_A.Y. McDonald 8100HP Series Shallow Well Jet Pump Specifications pdf pumpproducts
549873 2 A.Y. Mcdonald 8100 Series Shallow Well Jet Pumps Specifications 549873_2_A.Y. McDonald 8100 Series Shallow Well Jet Pumps Specifications 549873_2_A.Y. McDonald 8100 Series Shallow Well Jet Pumps Specifications pdf pumpproducts
: Pump 549877 2 A.Y. Mcdonald 81000 Series Shallow Well Jet Pumps Specifications 549877_2_A.Y. McDonald 81000 Series Shallow Well Jet Pumps Specifications pdf
Open the PDF directly: View PDF 
.
Page Count: 1
| Download | |
| Open PDF In Browser | View PDF |
SUBMITTAL DATA SHEET Jet Pumps Convertible | Shallow Well 8100 Series - Shallow Well All 8100 Series Shallow Well Pumps come with a 1 1/4” suction pipe and 3/4” discharge on the side or 1” on top. The sizes range from 1/2 to 1 horse power (HP). A C B D Overall Length "A" | Overall Height "B" Overall Width with Pressure Switch "C" Overall Width without Pressure Switch "D" Models Available High Capacity Model No. HP Volt *Max. Amps Switch Impeller A B C D WT 8150 1/2 115/230 11.2 20/40 plastic 20" 10" 10.5" 8" 46 8151 1/2 115/230 11.2 20/40 brass 20" 10" 10.5" 8" 46 8170 3/4 230/115 7.4 30/50 plastic 19.5" 10" 10.5" 8" 49 8171 3/4 230/115 7.4 30/50 brass 19.5" 10" 10.5" 8" 50 8110 1 230/115 8.8 30/50 plastic 20" 10" 10.5" 8" 52 8111 1 230/115 8.8 30/50 brass 20" 10" 10.5" 8" 53 *Factory Voltage Setting listed first in bold type. High Capacity | Shallow Well Model No. HP 8150 1/2 8151 8170 3/4 8171 8110 1 8111 Suction Lift - FT. 5 15 25 5 15 25 5 15 25 30 40 MAX. Shut Off Pressure 50 Model No. HP 11 4 5 6 9 5 15 25 5 15 25 5 15 25 Capacities in GPM at Discharge Pressure (PSI) 30 40 50 Switch Impeller A B C D WT 30/50 plastic 20" 10" 10.5" 8" 46 30/50 brass 20" 10" 10.5" 8" 48 30/50 plastic 19.5" 10" 10.5" 8" 49 30/50 brass 19.5" 10" 10.5" 8" 50 30/50 plastic 20" 10" 10.5" 8" 52 30/50 brass 20" 10" 10.5" 8" 53 7 8 60 70 MAX. Shut Off Pressure 7.6 7.1 5.7 2.7 5.5 5.4 4.3 2.0 70 3.7 3.6 2.9 9.4 9.4 7.8 4.2 7.0 7.0 5.9 2.9 74 4.6 4.6 3.8 2.1 13.4 13.4 12.7 9.2 3.0 10.0 10.0 9.4 6.5 2.4 80 6.2 6.2 6.0 4.3 1.8 1 - Zinc Plated Plug (With Pressure Gauge Tap & 1/4" plug) 2 3 10 Suction Lift - FT. 8150HP 1/2 8151HP 8170HP 8171HP 3/4 8110HP 8111HP 1 15.6 15.6 8.6 2.3 11.7 11.7 6.5 1.2 58 6.6 6.6 4.7 -18.8 18.8 16.2 8.8 14.4 14.4 12.3 3.9 61 8.6 8.6 7.3 2.7 24.2 24.0 23.0 15.0 20.1 18.6 18.4 10.9 64 11.6 11.4 11.3 4.7 1 Model No. HP Volt *Max. Amps 8150HP 1/2 115/230 11.2 8151HP 1/2 115/230 11.2 8170HP 3/4 230/115 7.4 8171HP 3/4 230/115 7.4 8110HP 1 230/115 8.8 8111HP 1 230/115 8.8 High Pressure | Shallow Well Capacities in GPM at Discharge Pressure (PSI) 20 High Pressure 7 - Diffuser Multi-volute engineered thermoplastic diffuser for maximum capacity and pressure 2 - Impeller Available in either dynamically balanced bronze 8 - Drain Plug or engineered thermoplastic 9 - Shaft Seal 3 - Nozzle-Venturi (Jet Ejector) Assembly Standard 5/8” ceramic carbon rotating mechanical seal Unitized construction made of non-distorting Polycarbonate with excellent heat resistance 10- Standard, Capactor Start, Nema J Motor 4 - Zinc Plated Nozzle Clean-out Plug Built to NEMA specifications by nationally known manufacturers to assure local service availability. 5 - Cast Iron Pump Body & Motor Adapter Choice of 1/2, 3/4 and 1 H.P. 50 Hz. or 60 Hz. 6 - Buna-N O-ring (On Venturi) 11- Pressure Switch Easily adjusted for higher or lower operating pressures SUBMITTAL INFORMATION - Pressure switch factory settings: 1/2 HP High Capacity = 20-40 PSI 1/2 HP High Pressure = 30-50 PSI - Nema J (Threaded Shaft) Motor 7/16” - 20 Threads - All 3/4 and 1 HP = 30-50 PSI * Maximum Amp. Draw at factory voltage setting. NO-LEAD: The weighted average of the wetted surface of this no-lead product contacted by consumable water contains less than one quarter of one percent (0.25%) lead. A.Y. McDonald Mfg. Co. P.O. Box 508 Dubuque, IA 52004-0508 Toll Free: 1-800-292-2737 Fax: 1-800-832-9296 Hours: 7:00 a.m. - 5:00 p.m., CST sales@aymcdonald.com www.aymcdonald.com A.Y. McDonald considers the information on this assembly drawing correct when published. Item and option availability, including specifications, are subject to change without notice. Submitted by: 3-14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c011 79.156289, 2014/03/31-23:39:12 Create Date : 2014:09:11 15:43:34-05:00 Metadata Date : 2014:09:11 15:43:37-05:00 Modify Date : 2014:09:11 15:43:37-05:00 Creator Tool : Adobe InDesign CC 2014 (Macintosh) Instance ID : uuid:58c5b19d-7aa7-374a-9c03-d91b17ecaa7b Original Document ID : xmp.did:31B6FB941E2068118083EB5B84A7FB54 Document ID : xmp.id:bddb4963-671e-4120-8093-3f490ba3eadd Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:d22a9181-e85f-470c-b0b8-ecf2d89fdf0b Derived From Document ID : xmp.did:C0DC9F21462068118083C92AB47719FA Derived From Original Document ID: xmp.did:31B6FB941E2068118083EB5B84A7FB54 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Macintosh) History Changed : / History When : 2014:09:11 15:43:36-05:00 Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 1 Creator : Adobe InDesign CC 2014 (Macintosh)EXIF Metadata provided by EXIF.tools