9500157A BAP Plus 550474 2 SJE Rhombus IFS Drip Control Panel Specifications

: Pump 550474 2 Sje Rhombus Ifs Drip Control Panel Specifications 550474_2_SJE Rhombus IFS Drip Control Panel Specifications pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

Download9500157A-BAP-Plus 550474 2 SJE Rhombus IFS Drip Control Panel Specifications
Open PDF In BrowserView PDF
Installer Friendly Series® Drip Control Panel
Single phase, simplex subsurface drip irrigation panel for pump control and system monitoring.
The Installer Friendly Series® Drip irrigation control panel is designed to control one 120V or 230V single phase pump for subsurface
irrigation systems. The IFS Drip panel features a simple, easy-to-use touch pad on the inner door for programming and monitoring
system operation: rest for standard time, rest for peak enable time, spin filter flush time, dose time, field flush time, field drain time,
and low alarm activation.

TOUCH PAD FEATURES
A.	 Alarm Power Indicator/Fuse. LED indicator light illuminates if alarm power
is present in panel.
B.	 Alarm Power Replace Indicator illuminates if alarm fuse is blown.
C. 	 Control Power Indicator/Fuse. LED indicator light illuminates if control power
is present in panel.
NOTE: If control power is not present panel will go into alarm mode.
D. 	 HOA (Hand/Off/Automatic) Indicators/Buttons control pump mode with
LED indication.
E.	 Float Status Indicators illuminate when floats are activated. Alarm will activate
and indicator will flash if a float operates out of sequence.

C

A

G

B
D

I

F

H
J

E
L
M

N

F. 	 Pump Run Indicator illuminates when pump is called to run.
G.	 Cycle Status Indicators allows user to see which cycle (dose, flush, or drain)
is activated.
H. 	 Advance and Pause Buttons allow user to cycle though system functions
for testing.

O

2

K
1

3

10

I. 	 Rest Time Indicator illuminates in between cycles.
J. 	 Count Indicator illuminates when viewing panel data.
K. 	 Program Indicator illuminates when programming panel.

6

L. 	 Flush Valve Indicator illuminates when flush valve is called to energize.

7

M. 	 Spin Valve Indicator illuminates when spin valve is called to energize.

4

N. 	 Seven-Segment LED Display shows high water alarm count, float status
sequence error count, low level cutout float open low alarm count, standard
dose count, power-fail count, pump on/off cycle count, pump run times (hh:mm),
and peak does count.
O. 	 Next, Up, Select Buttons are used to navigate through the display.
NOTE: LED display will turn off after one minute of not being used.

PANEL COMPONENTS
1.	 NEMA 4X enclosure ultraviolet stabilized thermoplastic with removable
mounting feet for outdoor or indoor use measures 12 x 10 x 6 inches (30.48
x 25.40 x 15.24 cm).

5
9
11

8

FEATURES
n	 Entire control system (panel and
switches) is UL Listed to meet and/or
exceed industry safety standards
n	 Dual safety certification for the United
States and Canada

2.	 Red Alarm Beacon provides 360o visual check of alarm condition.

n	 Standard package includes four
control switches

3. 	 Exterior Alarm Test/Normal/Silence Switch allows horn and beacon to be
tested and horn to be silenced in an alarm condition. Alarm automatically
resets once alarm condition is cleared.

n	 Optional pressure switch for aerobic
applications.

4. 	 Alarm Horn provides audio warning of alarm condition (83 to 85 decibel
rating).

n	 Complete with step-by-step installation
instructions

5.	 Circuit Breaker provides pump disconnect and branch circuit protection.

n	 Five-year limited warranty

6. 	 Circuit Board provides power to main circuit board and contains terminal
blocks for float and valve connections.

SEE PRICE BOOK FOR LIST PRICE.

7. 	 Float Connections
8. 	 Valve Connections
9. 	 Magnetic Motor Contactor controls pump by switching electrical lines.
10. 	Large Incoming Power/Pump Connection Terminal Block
11. 	 Ground Lugs
NOTE: Schematic/Wiring Diagram, Pump Specification Label, Input Display Code
Label, and Counter Display Code Label are on inside cover for viewing/programming
digital display.

PO Box 1708, Detroit Lakes, MN 56502
1-888-DIAL-SJE • 1-218-847-1317
1-218-847-4617 Fax
email: customer.service@sjerhombus.com

www.sjerhombus.com B.27

Installer Friendly Series® Drip Control Panel
IFS Drip Control Panel Operation:
Four (4) float switches (low level, timer on/off, peak enable, and high alarm floats) control the operation. Timers internal to the PCB
control the pump dosing cycles. When the liquid level activates the timer on float, the following operations occur:
	
	
	
	
	
	

1.
.2.
.3.
.4.
.5.
.6.

Rest time
The pump turns on and the spin filter valve opens for the user-programmed length of time.
The spin filter valve closes and the pump continues to run for the user-programmed dose time.
The pump continues to run and the flush valve opens for the user-programmed length of time.
The pump turns off and the flush valve remains open for the user-programmed drain time.
The flush valve closes for the user-programmed off time.

Call or fax your order!

1-888-DIAL-SJE (1-888-342-5753) n Fax 218-847-4617
B.28

Product offering and pricing are subject to change without notice.
Please visit www.sjerhombus.com for the most current information.

www.sjerhombus.com
customer.service@sjerhombus.com
9500081B
© SJE-Rhombus 12/16
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Page Count                      : 2
XMP Toolkit                     : 3.1-701
Producer                        : Adobe PDF Library 15.0
Creator Tool                    : Adobe InDesign CC 2015 (Windows)
Create Date                     : 2017:07:05 12:51:25-04:00
Modify Date                     : 2017:07:05 12:52:26-04:00
Title                           : 9500157A-BAP-Plus.indd
Creator                         : Adobe InDesign CC 2015 (Windows)
EXIF Metadata provided by EXIF.tools

Navigation menu