551463 2 Grundfos CR10 H Service Manual
: Pump 551463 2 Grundfos Cr10-H Service Manual 551463_2_Grundfos CR10-H Service Manual pdf
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
GRUNDFOS CR SERVICE MANUAL CR10-H Parts List & Kits Contents Parts List Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques Exploded View CR10-H 90c 19 56a 19a TM047921 25 1 Parts List & Kits CR10-H Pos. No. Part Description Model Stages No. Used Comments/Dimensions B.O.M. Material Included No. Ref. No. in kits ? parts list 1 Adapter for Motor Stool 2 Motor Stool 3 3a 3b 4 4a 4b 6 Chamber, Top, Complete with guide vane Chamber N, Top, without guide vane Chamber without guide vane Chamber complete with Pos. 45 & 65 Chamber Cpl. w/Pos. 45 & 65 & Bearing Chamber N Cpl. w/Pos. 45 & 65 & Brg. (option) Chamber N Cpl. w/Pos. 45 & 65 & Brg. (option) Chamber N Cpl. w/Pos. 45 & 65, (Low NPSH opt.) Volute, suction / discharge base 7 Volute, option larger suction & discharge Coupling Guard 7a 9 Screw for Coupling Guard Allen Screw 10 10a Shaft Pin Coupling Half (machined set) 12a 18(a) 19 19a 23, 23c 25 26 Discharge Adapter Discharge Adp. option larger suc./dis. & press Priming/Vent Plug (Suction) Pressure tap plug (Discharge) Pressure tap plug Plug Drain plug Staybolt Staybolt (Back-to-Back & Tandem Seal option) Due to part changes over time, all position numbers (1-203) may not be used. 7-12 14-18/17 2/1-2 3-6 7-12 14-18/17 2-17 2/1&18/17 3-22 2/1-22 2/1-22 2/1-22 2/1-22 3-18/17 2/1-22 2/1-22 2/1-22 2/1-2 3-18/17 2/1-18/17 2/1-2 3-18/17 2/1-22 2/1-2 3-6 7-12 14-18/17 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-2 3 4 5 6 7 8 9 10 12 14 16 18/17 20 22 2/1-2 3 4 5 6 7 1 1 1 1 1 1 1 *1 *1 *1 ^^^ ^^^^ ^^^^ ^^^^ 1 1 1 1 2 2 4 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 * 1 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 For NEMA, 213/215TC, 7.5 - 10HP For NEMA, F254TC, 15-20HP NEMA, 56C, .75 - 2.0HP NEMA, 182TC, 3 - 5HP (High) Add Pos.1 NEMA 213/215TC, 7.5-10HP (High) Add Pos. 1 for NEMA 254/256TC, 15-20HP NEMA, 284/286TSC, 25HP Slotted to accept Strap, pos. 26a Slotted to accept Strap, pos. 26a PTFE Pos.45 Silicon Carbide Bearing, PTFE Pos.45 Graflon Bearing, PTFE Pos.45 Bronze Bearing, PTFE Pos.45 PTFE Pos.45 GA, 1.5” suction (OD=76mm) for 4 hole dis. adapter G05/G22, 2” suction (OD=90mm) for 4 hole dis. adapter GB&C/G10/G50/G60, 3” suc. (OD=120), 6 hole dis. adap. NEMA-56C NEMA, 182-215TC (High),254TC-286TSC Screw comb. slot torx/straight slot 4 x 8mm M6 x 20mm, Delta/Tone Seal M10 x 25mm, Delta/Tone Seal ø5 x 26mm NEMA, 56C, 1/3 - 2HP. ø15.9/ ø16mm NEMA, 182/184TC, 3-5HP. ø28.6/ø16mm (High) NEMA, 213TC, 7.5-10HP. ø34.9/ø16mm (High) NEMA, 254TC, 15-20HP. ø41.2/ø16mm (High) NEMA, 284/286TSC, 25HP. ø41.2/ø16mm GA, 4 hole flange, OD=55mm, ID=26mm (1.0”), L=60mm G05, 4 hole flange, OD=55mm, ID=26mm (1.0”), L=111mm G22, 4 hole flange, OD=90mm, ID=50mm (2”), L=85mm GB, 6 hole flange, OD=76mm, ID=49mm (1.5”), L=65mm GC, 6 hole flange, OD=90mm, ID=49mm (2”), L=65mm G50, 6 hole flange, OD=76mm, ID=41mm (1.5”), L=116mm G10, 6 hole flange, OD=90mm, ID=50mm (2”), L=110mm G60, 6 hole flange, OD=90mm, ID=50mm (2”), L=142mm G20, 6 hole flange, OD=76mm, ID=40mm (1.5”), L=166mm G30, 6 hole flange, OD=90mm, ID=50mm (2”), L=192mm G50, 6 hole flange, OD=76mm, ID=47mm (1.5”), L=96mm G10, 6 hole flange, OD=90mm, ID=56mm (2”), L=90mm G60, 6 hole, flange, OD=90mm, ID=55mm (2”), L=122mm G20, 6 hole flange, OD=76mm, ID=46mm (1.5”), L=146mm G30, 6 hole flange, OD= 90mm, ID= 54mm (2”), L= 72mm G33, 6 hole flg.OD=120mm, ID= 80mm (3”), L=110mm G 1/2A, NV24 with NV9 x M8 stem 1/4” NPT,SS SQHD 1/4” NPT,SS SQHD G 1/2A, NV24, solid 1/4” NPT,SS SQHD M16 x 116mm M16 x 150mm M16 x 176mm M16 x 211mm M16 x 241mm M16 x 266mm M16 x 296mm M16 x 327mm M16 x 356mm M16 x 415mm M16 x 481mm M16 x 536mm M16 x 596mm M16 x 661mm, 4 pole & 50 Hz. M16 x 716mm, 4 pole & 50 Hz. M16 x 211mm M16 x 241mm M16 x 266mm M16 x 296mm M16 x 333mm M16 x 356mm This column indicates which pump model uses the spare part. If blank, the part is used in all models. 96476208 96486329 96486287 96486311 96486311 96486311 96486293 96487783 96491220 420015 96487846 96747280 96492496 96492498 96505300 95922001 95922000 95922002 96491002 96490656 96488481 00ID7899 00ID7901 310192 95061337 96516777 96516009 96516770 96516771 96516771 95922007 95922008 95922016 95922009 95922010 95922011 95922012 95922013 95922014 95922015 96834136 96834137 96834138 96834139 96834140 95922017 405150 95061351 00ID7216 00ID7216 370025 95061733 00ID7216 96922783 96922785 96922787 96922789 96922792 96922793 96922795 350179 290248 370134 96922805 380092 96922810 96922813 380094 96922789 96922792 96922793 96922795 370133 290248 No No No No No No No No No No No YES* YES YES No No No No YES YES YES YES YES YES YES YES YES YES YES No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No B.O.M. Ref. No. is only available if it is not included in a kit or does not have a material number listed. If it is included in a kit (YES), or has a material number, request one of these numbers. If not included in a kit (No), but has a Material Number, use Material Number. 2 Parts List & Kits CR10-H Pos. No. Part Description Model Stages No. Used Comments/Dimensions B.O.M. Material Included No. Ref. No. in kits ? parts list 26 Staybolt (Back-to-Back & Tandem Seal option) (continued) 26a Strap 26b 26c 28 Bolt for Pos. 26a Washer for Pos. 26b Motor Bolt 28g Bolt for Foot 56a & Volute Pos. 6 (GA, GB, GC) Bolt-Foot 56a & Volute Pos. 6 (G05, G10, G22, G50, G60) Bolt for Discharge Adapter Pos. 12a (GB, GC) Bolt for Discharge Adapter Pos. 12a (GA, G05) Staybolt Nut Sleeve O-ring 35 36 37(b) 39b Sleeve O-ring (option) Sleeve O-ring (option) O-ring for Discharge Adapter flange Pos. 12a 44a 44c 44b 44d 45 47a 49 49i 51 Inlet upper with Pos. 45 & 65 Inlet upper N with Pos. 45 & 65 (Low NPSH option) Inlet lower, machined Spacer ring N for low NPSH Pos. 44c Neck Ring Neck Ring (low NPSH option) Bearing Ring/Spacer Brg. Ring/Spacer (option for Graflon / Brz. 4a) Impeller Impeller N (Low NPSH option) Shaft, Complete Shaft, Cpl. (Back-to-Back & Tandem Seal option) Due to part changes over time, all position numbers (1-203) may not be used. 3 8 9 10 12 14 16 18/17 20: 4 pole 22: 4 pole 2/1-2 3 4 5 6 7 8 9 10 12 14 16 18/17 20: 4 pole 22: 4 pole 2/1-22 2/1-22 2/1-2 3-6 7-12 14-18/17 2/1-22 2/1-22 2/1-18/17 2/1-18/17 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-17 2/1-17 2/1-17 2/1-17 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 3-22 2/1-2 3 4 6 7 5 8 9 10 12 14 16 18/17 20 22 2/1-2 3 4 5 6 7 8 9 4 4 4 4 4 4 4 4 4 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 4 4 4 4 2 2 6 4 4 uu uu uu uu 1 1 1 1 1 1 1 1 # imp.- 1 ^^^^ ^^^^ # stgs1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 M16 x 386mm M16 x 415mm M16 x 450mm M16 x 506mm M16 x 566mm M16 x 628mm M16 x 686mm M16 x 745mm M16 x 807mm L*= 78.5mm x 20.3mm x 1.3mm, 316 SS, M8 nut L*= 108.5mm x 20.3mm x 1.3mm, 316 SS, M8 nut L*= 138.5mm x 20.3mm x 1.3mm, 316 SS, M8 nut L*= 168.5mm x 20.3mm x 1.3mm, 316 SS, M8 nut L*= 198.5mm x 20.3mm x 1.3mm, 316 SS, M8 nut L*= 228.5mm x 20.3mm x 1.3mm, 316 SS, M8 nut L*= 258.5mm x 20.3mm x 1.3mm, 316 SS, M8 nut L*= 288.5mm x 20.3mm x 1.3mm, 316 SS, M8 nut L*= 318.5mm x 20.3mm x 1.3mm, 316 SS, M8 nut L*= 378.5mm x 20.3mm x 1.3mm, 316 SS, M8 nut L*= 438.5mm x 20.3mm x 1.3mm, 316 SS, M8 nut L*= 498.5mm x 20.3mm x 1.3mm, 316 SS, M8 nut L*= 558.5mm x 20.3mm x 1.3mm, 316 SS, M8 nut L*= 618.5mm x 20.3mm x 1.3mm, 316 SS, M8 nut L*= 678.5mm x 20.3mm x 1.3mm, 316 SS, M8 nut M8 x 25mm, 316 SS w/Delta/Tone Seal A4, ø16.0/ø8.4x1.6mm NEMA, 56C, .75 - 2HP, UNC 3/8” x 25mm NEMA, 182/184TC, 3 - 5HP, UNC1/2” x 25mm NEMA, 213TC, 7.5 -10HP, JR 1/2” x 1.25” UNC NEMA, 254TC, 15HP, 1/2” x 2.5” UNC M12 x 20mm, low hex head, 8.8 Alloy Steel, Delta Tone/Seal M12 x 20mm, 8.8 Alloy Steel, Delta Tone/Seal M12 x 22mm Socket Head Cap Screw, Delta Tone/Seal M12 x 25mm Socket Head Cap Screw, Delta Tone/Seal 24mm x M16, Delta Tone/Seal EPDM, ø170.7 x 3.3mm FKM, ø170.7 x 3.3mm FXM, ø171.25 x 3.3mm FFKM, ø170.7 x 3.3mm EPDM, Parker 2-238 ø88.5 x 3.5mm FKM, Parker 2-238 ø88.5 x 3.5mm FXM, Parker 2-238 ø88.5 x 3.5mm FFKM, Parker 2-238 ø88.5 x 3.5mm ø59.5 x ø44.08 x 1.2mm, PTFE-Acoflon 100 ø75.8 x ø59.95 x 1.2mm, PTFE-Acoflon 100 SiC 150, ø23.4 x ø17.6 x ø15.0 x 14mm TC, ø21.9 x ø17.6 x ø15.0 x 14mm ø92.9 x ø44.0 x 13.6mm (back-plate 1.0mm) ø104.8 x ø59.85 x 25.4mm (back-plate 1.5mm) ø16 x 179.0mm, 431 SS ø16 x 209.0mm, 431 SS ø16 x 239.0mm, 431 SS ø16 x 299.0mm, 431 SS ø16 x 329.0mm, 431 SS ø16 x 269.0mm, 431 SS ø16 x 359.0mm, 431 SS ø16 x 389.0mm, 431 SS ø16 x 419.0mm, 431 SS ø16 x 479.0mm, 431 SS ø16 x 539.0mm, 431 SS ø16 x 599.0mm, 431 SS ø16 x 659.0mm, 431 SS ø16 x 719.0mm, 431 SS, 4 pole & 50 Hz. ø16 x 779.0mm, 431 SS, 4 pole & 50 Hz. ø16 x 269.0mm, 329 SS ø16 x 299.0mm, 329 SS ø16 x 329.0mm, 329 SS ø16 x 359.0mm, 329 SS ø16 x 389.0mm, 329 SS ø16 x 419.0mm, 329 SS ø16 x 449.0mm, 329 SS ø16 x 479.0mm, 329 SS This column indicates which pump model uses the spare part. If blank, the part is used in all models. 97525093 370134 97525096 96922806 290251 380093 96922814 370138 350185 96487758 96487760 96487761 96487762 96487764 96487765 96487766 96487768 96487769 96487771 96487773 96487775 96487777 96487778 96487781 96416603 00ID3284 00ID1839 00ID1840 00ID0185 96491112 95922047 95922048 95922049 95922050 00ID7908 96483101 96483102 96483109 96483140 95922035 95922036 95952037 95131207 96489070 96489039 96488000 96505491 97573624 96487401 96487400 96763100 330085 95061371 96487817 96476527 96489224 96490794 96490796 96490872 96490874 96490870 96490878 96490880 96490882 96490886 96490890 96490894 96490896 96490898 96490913 96507534 96507538 96507539 96507571 96507572 96507573 96507575 96507576 No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No YES YES YES YES YES YES YES YES No No No No YES YES YES YES No No No No No No No No No No No No No No No No No No No No No No No No No B.O.M. Ref. No. is only available if it is not included in a kit or does not have a material number listed. If it is included in a kit (YES), or has a material number, request one of these numbers. If not included in a kit (No), but has a Material Number, use Material Number. Parts List & Kits CR10-H Pos. No. Part Description Model Stages No. Used Comments/Dimensions B.O.M. Material Included No. Ref. No. in kits ? parts list 51 Shaft, Cpl. (Back-to-Back & Tandem Seal option) (continued) 55 Outer Sleeve 55b 56a Sleeve flange Foot for Pos. 6 (GA, GB, GC) Foot for Pos. 6 (G05, G10, G22, G50, G60) Foot for Pos. 6 (C1, G20, G30) 56b(d) Washer for bolt Pos. 56c 56c Bolt for sleeve flange Pos. 55b 56e Nut for bolt Pos. 56c 56f Bolt for Pos. 90 (BP139 w/GA, BP245 G05/22) Bolt for Pos. 90 (BP258 G05/22) Bolt for Pos. 90 (BP148 with GA & BP252 G05/22) Bolt for Pos. 90 (BP148with GA, Pos.56k & m) 56g Washer for bolt Pos. 56f 56k Spacer for base Pos. 90 56m Alignment pin 60 Stack Compression Spring 60a 61 64 64a 64b 64c 64d 64e 64g Stack Compression Spring (option) Stop spacer Spacing Pipe Spacing Pipe Spacing Pipe (Low NPSH option only) Clamp, Splined Spacing Pipe Spacing Pipe (Low NPSH option only) Spacing Pipe (de-staging 2 impellers option only) 65 Neck Ring Retainer N Neck Ring Retainer N (Low NPSH option) Lock Washer Set for Shaft Washer for Staybolt Lock Nut for Shaft Spacing Pipe Spacing Pipe (de-staging 1 impeller option only) O-ring for Sleeve Flange Pos. 55b 66 66a 67 69 69a 72a 76 76a 77a 79a 79b 79c 90 Nameplate Rivet for Nameplate Pump Head Cover for Tandem Seal & Cool Top® Pump Head Cover for Back-to-Back Disc / Plate complete w/79b & c for Cool Top Bushing for Disc / Plate 79a Retaining Ring for79b Main Support Baseplate Main Support Baseplate - Longer versions Due to part changes over time, all position numbers (1-203) may not be used. GA GA G05/22 G05/22 G05 G22 GA 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1&18/17 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-5 7-12 2/1-6 7-12 16 14-18/17 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 16 8 8 2 2 2 2 2 1 2 4 4 4 1 ^^^ ^^^^ 2 1 ^^^^ 1 1 per de-stg # stgs1 1 2 1 y 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 GA,G05 14-18/17 1 254TC 56/182T 254TC 213TC 254TC GA GA 10 12 14 16 18/17 20 22 2/1-2 3 4 5 6 7 8 9 10 12 14 16 18/17 20: 4 pole 22: 4 pole 2/1-22 2/1-22 2/1-22 14-18/17 2/1-22 2/1-22 2/1-22 2/1-6 14-18/17 7-12 14-18/17 2/1-22 14-18/17 14-18/17 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1&18/17 2/1&18/17 2/1-22 2/1-22 2/1-22 3-22 ø16 x 509.0mm, 329 SS ø16 x 569.0mm, 329 SS ø16 x 629.0mm, 329 SS ø16 x 689.0mm, 329 SS ø16 x 749.0mm, 329 SS ø16 x 809.0mm, 329 SS, 4 pole & 50 Hz. ø16 x 869.0mm, 329 SS, 4 pole & 50 Hz. ø171.1/ ø170.7 x 74.0mm x 1.5mm, 304 SS ø171.1/ ø170.7 x 104.0mm x 1.5mm, 304 SS ø171.1/ ø170.7 x 134.0mm x 1.5mm, 304 SS ø171.1/ ø170.7 x 164.0mm x 1.5mm, 304 SS ø171.1/ ø170.7 x 194.0mm x 1.5mm, 304 SS ø171.1/ ø170.7 x 224.0mm x 1.5mm, 304 SS ø171.1/ ø170.7 x 254.0mm x 1.5mm, 304 SS ø171.1/ ø170.7 x 284.0mm x 1.5mm, 304 SS ø171.1/ ø170.7 x 314.0mm x 1.5mm, 304 SS ø171.1/ ø170.7 x 374.0mm x 2.0mm, 316 SS ø171.1/ ø170.7 x 434.0mm x 2.0mm, 316 SS ø171.1/ ø170.7 x 494.0mm x 2.0mm, 316 SS ø171.1/ ø170.7 x 554.0mm x 2.0mm, 316 SS ø171.1/ ø170.7 x 614.0mm x 2.0mm, 316 SS, 50Hz. ø171.1/ ø170.7 x 674.0mm x 2.0mm, 316 SS, 50Hz. CR-H, CRN-H10, 15, 20, 316 SS H= 21mm, W= 198mm, ø16mm hole CL 142mm H= 98mm, W= 300mm, ø16mm hole CL 248mm H= 142mm, W= 300mm, ø16mm hole CL 248mm M12, 304 SS M12x1.75 x65mm, 12.9 Alloy Steel, Delta Tone/Seal M12, NV19, 8.8 Steel, Delta Tone/Seal Hex Hd.1/2 -13 UNC x 1” SAE 5, Z.P. Hex Hd.1/2 -13 UNC x 1” SAE 5, Z.P. Hex Head 1/2 -13 UNC x 1.25” SAE 5, Zinc plated Hex Head 1/2 -13 UNC x 2.25” SAE 5, Zinc plated 1/2” SAE, Zinc plated 148BP 254T, L=200mm x H=25.4mm x W=78.2mm Slotted Spring Pin, ø3/16” x 1” ASME, Zinc plated ø11.0 x ø7.0 x 15.5mm, EPDM ø11.0 x ø7.0 x 15.5mm, FKM ø11.0 x ø7.0 x 15.5mm, PTFE ø22.0 x ø17.8 x ø15.11 x 11.8 x 6.8mm ø21.5 x ø17.5 x 29.05mm ø21.5 x ø17.5 x 9.0mm ø21.5 x ø17.5 x 10.05mm ø21.5 x ø17.6 x ø15.0 x 12.7mm ø21.5 x ø17.5 x 6.0mm ø21.5 x ø17.5 x 38.0mm ø21.5 x ø17.5 x 30.0mm (use with 3b only) 96507577 96507579 96507581 96507583 96507584 96507585 96507587 96485420 96489762 96489763 96489765 96489766 96489838 96489768 96489769 96489770 96489829 96489830 96489832 96489833 96489834 96489859 95131164 95922023 95922024 96834143 00ID3103 95922053 00ID7917 ø61.9 x ø47.2 x 4.7mm ø78.8 x ø61.5 x 6.7mm ø13.5 x ø8.2 x 2.6mm DIN 125A, ø30 x ø17 x 2.5mm, Delta Tone/Seal 13mm x M8 ø21.5 x ø17.5 x 18.0mm ø21.5 x ø17.5 x 19.0mm (use with 3a only) EPDM, ø215.5mm FKM, ø215.5mm FFKM, ø215.5mm FXM, ø215.5mm 304SS, 60 x 45mm 304SS, ø3 x 5mm Cast Stainless Cast Stainless Cast Stainless Graflon Stainless BP. Cpl.139, L=991mm x W=305mm x H=106.5mm BP. Cpl.148, L=1219mm x W=381mm x H=107.9mm BP. Cpl.245, L=1143mm x W=305mm x H=106.5mm BP. Cpl.252, L=1320.8mm x W=381mm x H=107.9mm BP. Cpl.258, L=1473.2mm x W=457.2mm x H=119.1mm BP. Cpl.258, L=1473.2mm x W=457.2mm x H=119.1mm XLBP1(139/245), L=1500mm x W=381mm x H=106.5mm XLBP2(148/252), L=1777.8mm x W=381mm x H=107.9mm 96487285 330059 96417297 96430378 96496488 96491536 331409 95062143 95922038 95922039 95131208 95922040 96563333 96022882 96505487 96505488 96511281 96505571 96510985 96956336 96956346 96956341 96956356 96956360 96956360 96956376 Yes No YES No YES No No YES YES YES YES No No No No No No No YES YES YES YES YES YES YES 96956377 YES This column indicates which pump model uses the spare part. If blank, the part is used in all models. 96503070 96503072 96503071 96783511 331404 96495333 331402 96496311 331412 331406 331410 95061499 95061472 95061629 No No No No No No No No No No No No No No No No No No No No No No No No No No No No No YES YES YES YES YES YES YES YES YES YES YES No YES No YES No No No B.O.M. Ref. No. is only available if it is not included in a kit or does not have a material number listed. If it is included in a kit (YES), or has a material number, request one of these numbers. If not included in a kit (No), but has a Material Number, use Material Number. 4 Parts List & Kits CR10-H Pos. No. Part Description Model Stages No. Used Comments/Dimensions B.O.M. Material Included No. Ref. No. in kits ? parts list 90 90a Main Support Baseplate - Longer versions (continued) Bolt for motor to slider Pos. 90b 90b Motor support / slider 90c Support Bracket for Pump Cartridge 90d Bolt for motor slider Pos. 90b to base Pos. 90 90f Washer for motor bolt Pos. 90a to slider Pos. 90b 100 Priming/Vent Plug O-ring 100(a) Priming/Vent Plug O-ring Priming/Vent Plug O-ring 105(b) Shaft Seal HQBE Shaft Seal HQBV Shaft Seal HQQE Shaft Seal HQQV Shaft Seal HQQF Shaft Seal HQQK Shaft Seal HUBE Shaft Seal HUBV Shaft Seal HUBF Shaft Seal HUBK Shaft Seal HUUE Shaft Seal HUUV Shaft Seal HUUF Shaft Seal HUUK 117 Pipe for Air Vent 118 117a Counter Nut for Pipe 117 118 Air Vent 201 Flange, Suction 201a Flange, Discharge 203 Retaining ring for 201, 1.5” flange Retaining ring for 201, 2.0” flange Retaining ring for 201, 3.0” flange 203a Retaining ring for 201a, 1.0” flange Retaining ring for 201a, 1.5” flange Retaining ring for 201a, 2.0” flange Retaining ring for 201a, 3.0” flange Due to part changes over time, all position numbers (1-203) may not be used. 5 G22 14-18/17 1 56C 56/182 182TC 213TC 213TC 254TC 254TC 56C 182TC 213TC 254TC 56C 182TC 213TC 254C 2/1-22 2/1-22 2/1-22 56C 182/213 213-254 254TC 182TC 56C 182/213 254TC 2/1-2 2/1-6 3-6 7-12 7-12 14-18/17 14-18/17 2/1-2 3-6 7-12 14-18/17 2/1-2 3-6 7-12 14-18/17 4 4 4 4 4 4 4 2 2 2 2 2 2 2 2 1 1 1 4 4 4 4 4 4 4 4 n n n n * * * * * * * * * * * * * * 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2/1-2 3-12 7-18/17 14-18/17 3-6 2/1-2 3-6 14-18/17 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-10 2/1-10 2/1-10 12-22 12-22 12-22 2/1-10 2/1-10 2/1-10 12-22 12-22 12-22 12-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 2/1-22 XLBP3(258/264), L=2406.4mm x W=457.2mm x H=120mm Hex Head 5/16 -18 UNC x .75” SAE 5, Zinc plated for GA Hex Head 5/16 -18 UNC x .75” SAE 5, Zinc plated for G05/22 Hex Head 3/8 -16 UNC x .5” SAE 5, Zinc plated for GA Hex Head 3/8 -16 UNC x 5/8” SAE 5, Zinc plated for GA Hex Head 3/8 -16 UNC x 1” SAE 5, Zinc plated for G05/22 Hex Head 1/2 -13 UNC x 1.5” SAE 5, Zinc plated for GA Hex Head 1/2 -13 UNC x 1.25” SAE 5, Z.P. for G05/22 GA,GB,GC, BP139, L=204mm x H=45.5mm x W=25.4mm GA,GB,GC, BP139, L=230mm x H=23mm x W=25.4mm GA,GB,GC, BP148, L=252mm x H=20mm x W=25.4mm GA,GB,GC, BP148, L=299mm x H=20.3mm x W=25.4mm G05, G22, BP245, L=204mm x H=125.5mm x W=25.4mm G05, G22, BP245, L=230mm x H=100mm x W=25.4mm G05, G22, BP252, L=252mm x H=96.5mm x W=25.4mm G05, G22, BP252, L=354mm x H=67mm x W=25.4mm 304 SS, H=59mm CL of hole, GA/GB/GC 304 SS, H=136mm CL of hole, G05/G10/G22/G50/G60 304 SS, H=180mm CL of hole, G20/G30 Hex Head 1/4 -20 UNC x 1” SAE 5, Zinc plated Hex Head 1/4 -20 UNC x 1.75” SAE 5, Zinc plated for GA Hex Head 1/4 -20 UNC x 1.75” SAE 5, Z.P. for G05/22 Hex Head 1/4 -20 UNC x 2.5” SAE 5, Zinc plated for GA Hex Head 1/4 -20 UNC x 2.5” SAE 5, Z.P. for G05/22 5/16”” SAE, Zinc plated 3/8” SAE, Zinc plated 1/2” SAE, Zinc plated EPDM, ø16.3 x 2.4mm FKM, ø16.3 x 2.4mm FFKM, ø16.3 x 2.4mm FXM, ø16.3 x 2.4mm SiC, Carbon with resin-impregnated, EPDM SiC, Carbon with resin-impregnated, FKM SiC, SiC, EPDM SiC, SiC, FKM SiC, SiC, FXM SiC, SiC, FFKM TC, Carbon with resin-impregnated, EPDM TC, Carbon with resin-impregnated, FKM TC, Carbon with resin-impregnated, FXM TC, Carbon with resin-impregnated, FFKM TC, TC, EPDM TC, TC, FKM TC, TC, FXM TC, TC, FFKM G1/2, 316SS NV24, internal G1/2, 316SS Air vent type 1511-AV - 5/6430 1.5” 150#, 4 x 1/2”-13 UNC threaded flange, e-coat 2” 150#, 4 x 5/8”-11 UNC threaded flange, e-coat 3” 150#, 8 x non thread flange, electrocoated 1.5” 300#, 4 x 3/4”-10 UNC threaded flange, e-coat 2” 300#, 8 x 5/8”-11 UNC threaded flange, e-coat 3” 300#, 8 x 3/4”-10 UNC threaded flange, e-coat 1” 150#, 4 x 1/2”-13 UNC threaded flange, e-coat 1.5” 150#, 4 x 1/2”-13 UNC threaded flange, e-coat 2” 150#, 4 x 5/8”-11 UNC threaded flange, e-coat 1” 300#, 4 x 5/8”-11 UNC threaded flange, e-coat 1.5” 300#, 4 x 3/4”-10 UNC threaded flange, e-coat 2” 300#, 8 x 5/8”-11 UNC threaded flange, e-coat 3” 300#, 8 x 3/4”-10 UNC threaded flange, e-coat ø72.6mm x 5mm ø86.6mm x 5mm ø121mm x 6mm ø53.6mm x 3.2mm ø72.6mm x 5mm ø86.6mm x 5mm ø121mm x 6mm This column indicates which pump model uses the spare part. If blank, the part is used in all models. 96956379 YES 96956339 96956338 96956347 96956348 96956343 96956342 96956357 96956361 95131178 95131180 96834148 00ID1288 00ID2231 96428162 96442869 96484076 96484077 96484071 96484072 96484075 96484074 96483952 96483964 96483966 96483965 96483967 96483968 96484070 96483969 96525189 96506709 96427483 96922828 96922829 350085 96956145 96956146 96956147 96922827 96922828 96922829 96956144 96956145 96956146 96956147 96475395 96475396 350009 96439718 96475395 96475396 350009 96587720 96587721 96547671 96547671 YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES No No No YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES No No No No No No No No No No No No No No No No No No No No B.O.M. Ref. No. is only available if it is not included in a kit or does not have a material number listed. If it is included in a kit (YES), or has a material number, request one of these numbers. If not included in a kit (No), but has a Material Number, use Material Number. Parts List & Kits CR10-H NOTES: The first number is the total number of impellers. There are a few exceptions to this format: Example: A CR10-1 is actually a CR10-2/1. It has 2 chambers, 1 impeller (de-staged by 1), and uses a 2 stage shaft. Example: A CR10-17 is actually a CR10-18/17. It has 18 chambers, 17 impellers (de-staged by 1), and uses an 18 stage shaft. Exception to the above: Low NPSH models: Low NPSH CR10s have one less impeller and chamber than what is listed on the nameplate. Example: An LNPSH CR10-3 is actually a CR10-3/2. It has 3 chambers, 2 impellers, and uses a 4 stage shaft. Example: An LNPSH CR10-22 is actually a CR10-21. It has 21 chambers, 21 impellers, and uses a 22 stage shaft. YES* If the YES is followed by an asterisk, the part in kit is made of upgraded material (example 304 SS changed to 316 SS for Pos. 4a). *1 2 to 16 and 18 to 22 stage use Pos. 3 2 /1 and 18/17 stage use Pos. 3a De-staging by two impellers use one 3a and one 3b ^^^ 2/1 and 2 stage use 0 3 to 8 stage = # of stages less 2 9 to 14 stage = # of stages less 3 16 to 22 stage = # of stages less 4 Key to Symbols KITS Ø ANSI CPL EPDM ....... ....... ....... ....... ....... Recommended spare part Diameter American National Standards Institute Complete Assembly – these parts consist of more than one component Ethylene Propylene (also known as EPR and EPT) – an elastic substance similar to rubber FFKM ....... Kalrez Elastomer made by DuPont FKM ....... Fluoro Elastomer (generic for Viton) FXM ....... Fluoraz Elastomer made by Greene Tweed IEC ....... International Electro-technical Commission (European standards) M ....... International standard thread size designation (thread diameter in mm) mm ....... Millimeter MG ....... Identifies Grundfos motor type/size N ....... Stamp code for 316 SS or similar NBR ....... Buna - N (also known as Nitrile) – an elastic substance similar to rubber NEMA ....... National Electrical Manufacturers Association NPSH ....... Net Positive Suction Head PTFE ....... Teflon SiC ....... Silicon Carbide SS ....... Stainless Steel TC ....... Tungsten Carbide UNC ....... Unified National Coarse – a standard for threads on bolts Exception to the above: Low NPSH models 4/2 and 4/3 stage use 0 5/4 to 8/7 stage = # of stages less 4 9/8 to 16/15 stage = # of stages less 5 18/16 to 22/21 stage = # of stages less 6 De-staging by two impellers use 1 less than stated above. ^^^^ 2/1 to 8 stage = use 1 9 to 14 stage = use 2 16 to 22 stage = use 3 Exception to the above: Low NPSH models 16/15 stage = use 2 18 stage and up = use 3 * ** Standard use 1. Back-to-Back or Tandem pump version use 2 Standard use 1. Back-to-Back or Tandem pump version use 4 y Standard use 1. CR(I,N)10-2/1 and 10-18/17 replace with Pos. 69a # stgs Use the number of stages in standard models, less one in de-staged and Low NPSH models. # imp. Use the number of stages in standard models, less one in de-staged and Low NPSH models. uu Standard use 2. Back-to-Back or Tandem pump version use 3, Cool Top use 1 EPDM or FKM and 2 FXM in lower hot section of pump. L* A tip-to-tip length which includes the bends for slot engagement. Bottom tip to bend is 4.5mm shorter than the tip-to-tip value. 6 Spare Part Kits CR10-H spare part kits Since certain pump parts can be expected to exhibit wear at the same time as related pump parts, they have been grouped into the following kits for your convenience. The numbers indicate the quantity of theKits(draft part within CR10-H JL) each kit. Please order these kits using the kit material number at the top of the columns. CR(I, N)10 SiC Bearing WEAR PARTS KIT 1-8 WEAR PARTS KIT 9-14 WEAR PARTS KIT 15-22 Pos. No. Description 4a Chamber N Cpl. w/Pos.45 & 65 & SiC Bearing 26b Bolt for strap, M8 x 25mm, 316 SS w/Delta Seal 26c Washer for strap, A4, ø16.0/ø8.4x1.6mm 45 Neck Ring, ø59.5 x ø44.08 x 1.2mm, PTFE-Acoflon 100 47a Bearing Ring/Spacer, SiC 150, ø23.4 x 14mm 61 Stop Spacer,ø29.0 x ø18.4 x ø17.6 x ø15.0 x 9.5 x 2mm 62 Stop Ring, ø16.6 x ø15.0 x 1.6mm 64a Spacing Pipe, ø21.5 x ø17.5 x 9.0mm 64c Clamp, Splined, ø21.5 x ø17.6 x ø15.0 x 12.7mm 64d Spacing Pipe, ø21.5 x ø17.5 x 6.0mm 65 Neck Ring Retainer, N, ø61.9 x ø47.2 x 4.7mm 66 Lock Washer Set of 2, ø13.5 x ø8.2 x 2.6mm 67 Lock Nut, 13mm x M8 Kit No. Kit No. Kit No. Material No. 96747281 96416603 00ID3284 96487401 96763100 330072 330057 96495333 96496311 331412 96487285 96417297 96496488 96511889 CR(I, N )10 Graflon Bearing WEAR PARTS KIT 1-8 WEAR PARTS KIT 9-14 WEAR PARTS KIT 15-22 Pos. No. Description 4a Chamber N Cpl. w/Pos.45 & 65 & Graflon Bearing 26b Bolt for strap, M8 x 25mm, 316 SS w/Delta Seal 26c Washer for strap, A4, ø16.0/ø8.4x1.6mm 45 Neck Ring, ø59.5 x ø44.08 x 1.2mm, PTFE-Acoflon 100 47a Bearing Ring/Spacer, TC 150, ø21.9 x 14mm 61 Stop Spacer,ø29.0 x ø18.4 x ø17.6 x ø15.0 x 9.5 x 2mm 62 Stop Ring, ø16.6 x ø15.0 x 1.6mm 64a Spacing Pipe, ø21.5 x ø17.5 x 9.0mm 64c Clamp, Splined, ø21.5 x ø17.6 x ø15.0 x 12.7mm 64d Spacing Pipe, ø21.5 x ø17.5 x 6.0mm 65 Neck Ring Retainer, N, ø61.9 x ø47.2 x 4.7mm 66 Lock Washer Set of 2, ø13.5 x ø8.2 x 2.6mm 67 Lock Nut, 13mm x M8 Kit No. Kit No. Kit No. Material No. 96492496 96416603 00ID3284 96487401 330085 330072 330057 96495333 96496311 331412 96487285 96417297 96496488 96511921 CR(I )10 Bronze Bearing WEAR PARTS KIT 1-8 WEAR PARTS KIT 9-14 WEAR PARTS KIT 15-22 Kit No. Kit No. Kit No. 96511920 Pos. No. 4a 26b 26c 45 47a 61 62 64a 64c 64d 65 66 67 Description Chamber N Cpl. w/Pos.45 & 65 & Bronze Bearing Bolt for strap, M8 x 25mm, 316 SS w/Delta Seal Washer for strap, A4, ø16.0/ø8.4x1.6mm Neck Ring, ø59.5 x ø44.08 x 1.2mm, PTFE-Acoflon 100 Bearing Ring/Spacer, TC 150, ø21.9 x 14mm Stop Spacer,ø29.0 x ø18.4 x ø17.6 x ø15.0 x 9.5 x 2mm Stop Ring, ø16.6 x ø15.0 x 1.6mm Spacing Pipe, ø21.5 x ø17.5 x 9.0mm Clamp, Splined, ø21.5 x ø17.6 x ø15.0 x 12.7mm Spacing Pipe, ø21.5 x ø17.5 x 6.0mm Neck Ring Retainer, N, ø61.9 x ø47.2 x 4.7mm Lock Washer Set of 2, ø13.5 x ø8.2 x 2.6mm Lock Nut, 13mm x M8 HQxx SHAFT SEAL KIT, BALANCED CARTRIDGE (Maximum allowed working PSI is 435) (Tandem Seal option Pumps require 2 of each Seal Kit) Pos. No. 105 HQBE HQBV HQQE Kit No. Kit No. Kit No. Kit No. Kit No. Kit No. Material No. 96484076* 96484077* 96484071* HQQF 96484075* Description HQQK HQQV N/A Grinding Device Tool for Emery Cloth Emery Cloth N/A * Seal material number includes the Adjusting fork 96483950. 7 Material No. 96492498 96416603 00ID3284 96487401 330085 330072 330057 96495333 96496311 331412 96487285 96417297 96496488 96484074* 96484072* 370711 370712 96511922 1 2 2 7 1 1 1 1 1 1 7 1 1 96511925 Qty. Included in each Kit 2 3 2 2 2 2 12 19 2 3 1 1 1 1 2 3 1 1 2 3 12 19 1 1 1 1 96511924 1 2 2 7 1 1 1 1 1 1 7 1 1 96511927 Qty. Included in each Kit 2 3 2 2 2 2 12 19 2 3 1 1 1 1 2 3 1 1 2 3 12 19 1 1 1 1 96511923 96511926 1 2 2 7 1 1 1 1 1 1 7 1 1 Qty. Included in each Kit 2 3 2 2 2 2 12 19 2 3 1 1 1 1 2 3 1 1 2 3 12 19 1 1 1 1 96511848 96511849 96511844 96511847 96511846 96511845 Qty. Included in each Kit 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Spare Part Kits CR10-H spare part kits (Continued) HUxx SHAFT SEAL KIT, BALANCED CARTRIDGE (Maximum allowed working PSI is 435) (Tandem Seal option Pumps require 2 of each Seal Kit) Pos. No. 105 Description HUBE HUBF HUBK HUBV HUUE HUUF HUUK HUUV N/A Grinding Device Tool for Emery Cloth N/A Emery Cloth * Seal material number includes the Adjusting fork 96483950. Standard CR Gasket Kits GASKET KIT (EPDM) GASKET KIT (FKM) GASKET KIT (FXM) GASKET KIT (FFKM) GASKET KIT (EPDM)-Double Seal option. GASKET KIT (FKM)-Double Seal option. GASKET KIT (FFKM/EPDM)-Double Seal option. GASKET KIT (FFKM/FKM)-Double Seal option. GASKET KIT (FXM/EPDM)-Cool Top option. Description Pos. No. 37 Sleeve O-ring, EPDM (WRC NSF), ø170.7 x 3.3mm Sleeve O-ring, FKM, ø170.7 x 3.3mm 37b Sleeve O-ring, FXM, ø171.25 x 3.3mm Sleeve O-ring, FFKM, ø170.7 x 3.3mm 37c Disc Plate O-ring, EPDM, ø155.0 x 3.0mm Disc Plate O-ring, FKM, ø155.0 x 3.0mm 38, 100(a,b) Drain Plug O-ring, EPDM, Ø16.3 x 2.4mm Drain Plug O-ring, FKM, Ø16.3 x 2.4mm Drain Plug O-ring, FXM, ø16.3 x 2.4mm Drain Plug O-ring, FFKM, ø16.3 x 2.4mm 38a Drain Plug O-ring, EPDM, ø5.3 x 2.4mm Drain Plug O-ring, FKM, ø5.3 x 2.4mm Drain Plug O-ring, FXM, ø5.3 x 2.4mm Drain Plug O-ring, FFKM, ø5.3 x 2.4mm 39 Flange O-ring, EPDM, ø90 x 3mm Flange O-ring, FKM, ø90 x 3mm Flange gasket, Fiber, 122mm x ø60 x ø44 x 2mm Flange gasket, Fiber, ø102 x ø65 x 2mm Flange gasket, Fiber, ø92 x ø49 x 2mm 60(a) Stack Compression Spring, EPDM, ø11.0xø7.0x15.5mm Stack Compression Spring, FKM, ø11.0xø7.0x15.5mm Stack Compression Spring, PTFE, ø11.0xø7.0x15.5mm 109a Disc Plate O-ring, EPDM, ø27.5.0 x 2.75mm Disc Plate O-ring, FKM, ø27.5 x 2.75mm Disc Plate O-ring, FXM, ø27.5 x 2.75mm CR10-H Kits(draft JL) Kit No. Kit No. Kit No. Kit No. Kit No. Kit No. Kit No. Kit No. Material No. 96483952* 96483966* 96483965* 96483964* 96483967* 96484070* 96483969* 96483968* 370711 370712 96511836 Kit No. Kit No. Kit No. Kit No. Kit No. Kit No. Kit No. Kit No. Kit No. 96509609 96483101 96483102 96483109 96483140 96509703 96480168 00ID1288 00ID2231 96442869 96428162 00ID2142 00ID3945 96511292 96511293 96496200 00ID2856 420039 330035 00ID2582 96503070 96503072 96503071 96483103 96483104 96483141 96511839 96511838 96511837 96511840 96511843 96511842 96511841 Qty. Included in each Kit 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 96509610 96534871 96533374 96525433 96525434 96525435 96525436 96525432 Qty. Included in each Kit 3 2 2 1 1 3 1 2 2 2 2 2 1 3 7 4 3 1 7 4 3 3 3 1 3 3 1 1 2 2 2 2 2 2 2 2 2 4 4 4 4 1 1 1 1 1 2 2 2 2 2 2 2 2 2 4 2 2 2 2 2 2 4 4 2 2 2 2 2 2 2 4 4 4 1 Add to to above above standard standardgaskets gasketsto tocomplete completedesired desiredCRH, CRH,CRNH CRNHmodel model Add Kit, O-ring O-ring EPDM EPDM CR-H, CR-H,CRN-H10/15/20/32 CRN-H10/15/20/32GB-G60 GA/G05/G22 Kit, Kit, O-ring O-ring FKM FKM CR-H, CR-H,CRN-H10/15/20/32 CRN-H10/15/20/32GB-G60 GA/G05/G22 Kit, Kit, O-ring O-ring FXM FXM CR-H, CR-H,CRN-H10/15/20/32 CRN-H10/15/20/32GB-G60 GA/G05/G22 Kit, Kit, O-ring O-ring FFKM FFKM CR-H, CR-H,CRN-H10/15/20/32 CRN-H10/15/20/32GB-G60 GA/G05/G22 Kit, Kit,Pos. O-ring GB-G60 Description No. EPDM CR-H, CRN-H10/15/20/32 Kit, O-ring CR-H,2-268 CRN-H10/15/20/32 O-ring, EPDM ø215.5 GB-G60 x 3.5mm 72a FKM Kit, O-ring FXM CR-H,2-268 CRN-H10/15/20/32 O-ring, Viton ø215.5 x GB-G60 3.5mm Kit, O-ring FFKM CR-H, CRN-H10/15/20/32 O-ring, 2-268 Fluoraz ø215.5 GB-G60 x 3.5mm x 3.5mm Pos. No. O-ring, 2-268 FFKM ø215.5Description O-ring, 2-238 EPDM x 3.5mm 39b O-ring, Parker 2-268 EPDM ø215.5ø88.5 x 3.5mm 72a O-ring, 2-238 Viton Viton ø88.5 O-ring, 2-268 ø215.5x x3.5mm 3.5mm O-ring, 2-238 Fluoraz ø88.5 x 3.5mm O-ring, 2-268 Fluoraz ø215.5 x 3.5mm O-ring, x 3.5mm O-ring, 2-238 2-268FFKM FFKMø88.5 ø215.5 x 3.5mm O-ring, 2-230 EPDM ø63.1 x 3.5mm 39b NEMA COUPLING KIT O-ring, 2-230 Viton ø63.1 x 3.5mm ø15.9/ø16 O-ring, 2-230 Fluoraz ø63.1 x 3.5mm ø28.6/ø16 O-ring, 2-230 FFKM ø63.1 x 3.5mm (High) ø34.9/ø16 O-ring, Parker 2-238 EPDM ø88.5 x(High) 3.5mm O-ring, 2-238 Viton ø88.5ø41.3/ø16 x 3.5mm Pos. No. Description O-ring, 2-238 Fluoraz ø88.5 x 3.5mm 9 Allen Screw, M6 x 20mm, Delta Seal O-ring, 2-238 FFKM ø88.5 x 3.5mm Allen Screw, M10 x 25mm, Delta Seal 10 Shaft Pin, ø5 x 26mm, Stainless NEMA COUPLING KIT 10a Coupling. Half set, 56C, 1/3 ø15.9/ø16 - 2HP. ø15.8 / ø16 Cplg. Half set, 182/184TC, 3-5HP, High,(High) ø28.5/ø16 ø28.6/ø16 Cplg. Half set, 213TC, 7.5-10HP, High, ø34.9/ø16 ø34.9/ø16 (High) Cplg. Half set, 254TC-284/286TSC,15-25HP. ø41.2/ø16 ø41.3/ø16 N/A Pos. No. Adjusting Fork Description 9 10 10a N/A Allen Screw, M6 x 20mm, Delta Seal Allen Screw, M10 x 25mm, Delta Seal Shaft Pin, ø5 x 26mm, Stainless Coupling. Half set, 56C, 1/3 - 2HP. ø15.8 / ø16 Cplg. Half set, 182/184TC, 3-5HP, High, ø28.5/ø16 Cplg. Half set, 213TC, 7.5-10HP, High, ø34.9/ø16 Cplg. Half set, 254TC-284/286TSC,15-25HP. ø41.2/ø16 Adjusting Fork KitNo. No. 96922800 Kit 96956134 KitNo. No. 96922802 Kit 96956135 KitNo. No. 96922816 Kit 96923565 KitNo. No. 96922822 Kit 96923571 Kit No. Qty. Included in each Kit Kit No. 95922038 1 Kit No. 95922039 1 Kit No. 95922040 1 95131208 1 Included in each Kit 95922035 11 95922038 95922036 11 95922039 95952037 1 1 95922040 95131207 1 1 95131208 95922032 1 95922033 1 Kit No. 96511353 95922034 1 Kit No. 96753660 95131189 1 Kit No. 96753661 95922035 Kit No. 96511356 95922036 Material No. Qty. Included in each Kit 95952037 00ID7899 4 95131207 00ID7901 4 4 4 310192 1 1 1 1 96516777 1 Kit No. 96511353 96516009 1 Kit No. 96753660 96516770 1 Kit No. 96753661 96516771 1 Kit No. 96511356 96483950No. 1 1 Material Qty. Included in each Kit 00ID7899 00ID7901 310192 96516777 96516009 96516770 96516771 96483950 96956134 96956135 96923565 96923571 1 1 1 1 1 1 1 1 4 1 1 4 1 4 1 4 1 1 1 1 1 1 8 Spare Part Kits CR10-H spare part kits (Continued) COUPLING GUARD KIT NEMA 56C, 1/3-2HP NEMA 182-215TC (High) & 254TC-286TSC, 3 -25HP Pos. No. Description 7 Coupling Guard, W=127mm x H=90.5mm Coupling Guard, W=157mm x H=171mm 7a Screw comb.slot torx/straight slot 4 x 8mm Kit No. Kit No. Material No. 96491002 96490656 96488481 96509612 96509614 Qty. Included in each Kit 2 2 4 4 Air Vent Kit - Horizontal Units CR-H, CRN-H1S to 20 Pos. No. 117 117a 118 Description Air Vent Pipe, short for 118, G1/2 , 60x43 Counter Nut for Pipe 117, G1/2 Air vent type 1511-AV - 5/6430 Kit No. Material No. 96525189 96506709 96427483 91136720 Qty. Included in each Kit 1 2 1 accessories ANSI COMPANION FLANGES FOR MEDIUM CR-H Kit No. 97642565 1.5" x 1" CI BLACK for GA 125# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket Kit No. 96967594 1.5" x 1" CI BLACK for GA 250# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket Kit No. 97642567 2" x 1" CI BLACK for G05 125# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket Kit No. 96967595 2" x 1" CI BLACK for G05 250# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket Kit No. 97642571 3" x 1.5" CI BLACK for GB, G50 and G20 125# Pos. No. Description N/A Nuts N/A Bolts N/A Flanges N/A Gasket Kit No. 97658571 3" x 1.5" CI BLACK for GB, G50 and G20 250# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket Kit No. 97642574 3" x 2" CI BLACK for GC, G10, G60 and G30 125# Pos. No. Description N/A Nuts N/A Bolts N/A Flanges N/A Gasket Kit No. 97658572 3" x 2" CI BLACK for GC, G10, G60 and G30 250# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket Kit No. 97642568 2" x 2" CI BLACK for G22 125# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket Kit No. 97757976 2" x 2" CI BLACK for G22 250# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket 9 1.5" Material No. 97693886 91123167 91123168 1.5" Material No. 91137423 96983494 97694408 2" Material No. 91130816 96983491 97692909 2" Material No. 91120660 00ID2743 00ID2747 3" Material No. 00ID1510 00ID1921 00ID1925 560185 3" Material No. 91120662 91121943 91122339 3" Material No. 00ID1510 00ID1921 00ID1925 560185 3" Material No. 91120662 91121943 91122339 2" Material No. 91130816 96983491 97692909 2" Material No. 91120660 00ID2743 00ID2747 1" Qty. 4 1 1 Material No. 97693886 96983489 97692916 Qty. 4 1 1 Qty. 4 1 1 Material No. 91130816 96983493 97694407 Qty. 4 1 1 Material No. 97526838 96983489 97692916 Qty. 8 1 1 Material No. 91130816 96983493 97694407 1.5" Qty. 4 1 1 Qty. 4 4 1 1 Material No. none 97693886 91123167 91123168 1.5" Qty. 0 4 1 1 Qty. 8 1 1 Material No. 91137423 96983494 97694408 Qty. 4 1 1 Qty. 4 4 1 1 Material No. none 91130816 96983491 97692909 Qty. 8 1 1 Material No. 91120660 00ID2743 00ID2747 Qty. 4 1 1 Material No. 91130816 96983491 97692909 Qty. 8 1 1 Material No. 91120660 00ID2743 00ID2747 1" Qty. 4 1 1 1" Qty. 4 1 1 1" 2" Qty. 0 4 1 1 2" Qty. 8 1 1 2" Qty. 4 1 1 2" Qty. 8 1 1 Spare Part Kits CR10-H accessories (Continued) ANSI COMPANION FLANGES FOR MEDIUM CR-H, CRN-H Kit No. 97698645 1.5" x 1" 316SS for GA 150# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket Kit No. 97698646 1.5" x 1" 316SS for GA 300# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket Kit No. 97698647 2" x 1" 316SS for G05 150# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket Kit No. 97698648 2" x 1" 316SS for G05 300# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket Kit No. 97698649 3" x 1.5" 316SS for GB, G50 and G20 150# Pos. No. Description N/A Nuts N/A Bolts N/A Flanges N/A Gasket Kit No. 97698650 3" x 1.5" 316SS for GB, G50 and G20 300# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket Kit No. 97698651 3" x 2" 316SS for GC, G10, G60 and G30 150# Pos. No. Description N/A Nuts N/A Bolts N/A Flanges N/A Gasket Kit No. 97698652 3" x 2" 316SS for GC, G10, G60 and G30 300# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket Kit No. 97743809 2" x 2" 316SS for G22 150# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket Kit No. 97743810 2" x 2" 316SS for G22 300# Pos. No. Description N/A Bolts N/A Flanges N/A Gasket 1.5" Material No. 97743748 96983498 97694409 1.5" Material No. 91143035 96983496 97694408 2" Material No. 91143029 96983499 97692909 2" Material No. 97743741 00ID7240 00ID2747 3" Material No. 91143011 91143031 91121944 560185 3" Material No. 91143038 91121945 91122339 3" Material No. 91143011 91143031 91121944 560185 3" Material No. 91143038 91121945 91122339 2" Material No. 91143029 96983499 97692909 2" Material No. 97743741 00ID7240 00ID2747 1" Qty. 4 1 1 Material No. 97743748 96983497 97692916 Qty. 4 1 1 Qty. 8 1 1 Material No. 91143029 96983495 97694407 Qty. 4 1 1 Material No. 97743748 96983497 97692916 Qty. 8 1 1 Material No. 91143029 96983495 97694407 1.5" Qty. 4 1 1 Qty. 4 4 1 1 Material No. none 97743748 96983498 97694409 1.5" Qty. 0 4 1 1 Qty. 8 1 1 Material No. 91143035 96983496 97694408 Qty. 4 1 1 Qty. 4 4 1 1 Material No. none 91143029 96983499 97692909 Qty. 8 1 1 Material No. 97743741 00ID7240 00ID2747 Qty. 4 1 1 Material No. 91143029 96983499 97692909 Qty. 8 1 1 Material No. 97743741 00ID7240 00ID2747 1" Qty. 4 1 1 1" Qty. 4 1 1 1" 2" Qty. 0 4 1 1 2" Qty. 8 1 1 2" Qty. 4 1 1 2" Qty. 8 1 1 10 Spare Part Kits CR10-H accessories (Continued) CR10-H Kits(draft JL) Baseplate Kit 139 56C for GA/B/C Kit No. 97534517 182TC for GA/B/C Kit No. 97534518 XLBP1 56C for GA/B/C Kit No. 97534573 182TC for GA/B/C Kit No. Pos. No. Description Material No. Qty. Included in each Kit 90 Baseplate Cpl. 139, L=991* x W=305* x H=106.4768* 96956336 1 1 Baseplate Cpl. XLBP1, L=1500* x W=305* x H=106.4768* 96956376 1 N/A Slider & fastners for 56C(consists of slider & hardware) 96983855 1 1 96983858 1 N/A Slider & fastner for 182TC (consists of slider & hardware) N/A Hardware Kit -96983855/68/78(cont. pos.56f, g, 90a,d& f)** 97501470 1 1 N/A Hardware Kit -96983858 (cont. pos.56f & g, 90a, d & f)** 97501481 1 56f Bolt, Hex Head 1/2 -13 UNC x 1" SAE 5, Zinc plated N/A 2 2 2 56g Washer, 1/2" SAE, Zinc plated N/A 2 2 2 90a Bolt, Hex Head 5/16 -18 UNC x .75" SAE 5, Zinc plated N/A 4 4 Bolt, Hex Head 3/8 -16 UNC x .5" SAE 5, Zinc plated N/A 4 90b Slider, GA/B/C 56C/139BP, L=204* x H=45.5* x W=25.4* 96956339 2 2 Slider, GA/B/C 182TC/139 BP, L=230* x H=23* x W=25.4* 96956338 2 90d Bolt, Hex Head 1/4 -20 UNC x 1" SAE 5, Zinc plated N/A 4 4 Bolt, Hex Head 1/4 -20 UNC x 1.75" SAE 5, Zinc plated N/A 4 90f Washer, 5/16" SAE, Zinc plated N/A 4 4 Washer, 3/8" SAE, Zinc plated N/A 4 CR10-H Kits(draft JL) * Values in mm, Length (L) is +/- 2mm, Height (H) is +/- 1mm, Width (W). ** Hardware kits 97501470 and 81 are also available for sale. Baseplate Kit 148 213TC for GA/B/C Kit No. 97534520 254TC for GA/B/C Kit No. 97534531 XLBP2 213TC for GA/B/C Kit No. 97573875 254TC for GA/B/C Kit No. Pos. No. Description Material No. Qty. Included in each Kit 90 Baseplate Cpl. 148, L=1219* x W=381* x H=107.9* 96956346 1 1 Baseplate Cpl. XLBP2, L=1777.8* x W=381* x H=107.9* 96956377 1 N/A Slider & fastners for 213TC(consists of slider & hardware) 96983859 1 1 N/A Slider & fastner 254TC (cont. of 56k , slider & hardware) 96983862 1 N/A Hardware Kit -96983859(consists of pos.56f, g, 90a,d& f)** 97501482 1 1 N/A Hardware Kit -96983862 (cont. pos.56f, g & m, 90a, d & f)** 97501483 1 56f Bolt, Hex Head 1/2 -13 UNC x 1.25" SAE 5, Zinc plated N/A 2 2 Bolt, Hex Head 1/2 -13 UNC x 2.25" SAE 5, Zinc plated N/A 2 56g Washer, 1/2" SAE, Zinc plated N/A 2 2 2 56k Volute Spacer, 148 BP 254T, L=200* x H=25.4* x W=78.2 96956349 1 56m Slotted Spring Pin ø3/16" x 1" Zinc Plated N/A 2 90a Bolt, Hex Head 3/8 -16 UNC x 5/8" SAE 5, Zinc plated N/A 4 4 Bolt, Hex Head 1/2 -13 UNC x 1.5" SAE 5, Zinc plated N/A 4 90b Slider, GA/B/C 213TC/148BP, L=252* x H=20* x W=25.4* 96956347 2 2 Slider, GA/B/C 254TC/148BP, L=299* x H=20.3* x W=38.1* 96956348 2 90d Bolt, Hex Head 1/4 -20 UNC x 1.75" SAE 5, Zinc plated N/A 4 4 Bolt, Hex Head 1/4 -20 UNC x 2.5" SAE 5, Zinc plated N/A 4 90f Washer, 3/8" SAE, Zinc plated N/A 4 4 Washer, 1/2" SAE, Zinc plated N/A 4 * Values in mm, Length (L) is +/- 2mm, Height (H) is +/- 1mm, Width (W). ** Hardware kits 97501482 and 83 are also available for sale. Baseplate Kit 245 56C for G05/10/50/60/70/22/33/44 Kit No. 97534535 182TC for G05/10/50/60/70/22/33/44 Kit No. 97534536 XLBP1 56C for G05/10/50/60/70/22/33/44 Kit No. 97534575 182TC for G05/10/50/60/70/22/33/44 Kit No. Pos. No. Description Material No. Qty. Included in each Kit 90 Baseplate Cpl. 245, L=1143* x W=305* x H=106.4768* 96956341 1 1 Baseplate Cpl. XLBP1, L=1500* x W=305* x H=106.4768* 96956376 1 N/A Slider & fastners for 56C(consists of slider & hardware) 96983868 1 1 N/A Slider & fastner for 182TC (consists of slider & hardware) 96983869 1 N/A Hardware Kit -96983855/68/78(cont. pos.56f, g, 90a,d& f)** 97501470 1 1 N/A Hardware Kit -96983869/79 (cont. pos.56f & g, 90a, d & f)** 97501488 1 56f Bolt, Hex Head 1/2 -13 UNC x 1" SAE 5, Zinc plated N/A 2 2 2 56g Washer, 1/2" SAE, Zinc plated N/A 2 2 2 90a Bolt, Hex Head 5/16 -18 UNC x .75" SAE 5, Zinc plated N/A 4 4 4 90b Slider, G05/22 - 56C/245BP, L=204* x H=125.5* x W=25.4* 96956343 2 2 Slider, G05/22 - 182T/245 BP, L=230* x H=100* x W=25.4* 96956342 2 90d Bolt, Hex Head 1/4 -20 UNC x 1" SAE 5, Zinc plated N/A 4 4 Bolt, Hex Head 1/4 -20 UNC x 2.5" SAE 5, Zinc plated N/A 4 Washer, 5/16" SAE, Zinc plated N/A 4 4 90f * Values in mm, Length (L) is +/- 2mm, Height (H) is +/- 1mm, Width (W). ** Hardware kits 97501470 and 88 are also available for sale. 11 Baseplate Kit 252 213TC for G05/10/50/60/70/22/33/44 XLBP2 213TC for G05/10/50/60/70/22/33/44 Pos. No. Description 90 Baseplate Cpl. 252, L=1321* x W=381* x H=107.9* Baseplate Cpl. XLBP2, L=1777.8* x W=381* x H=107.9* N/A Slider & fastners for 213TC(consists of slider & hardware) N/A Hardware Kit -96983870/80(cont. of pos.56f, g, 90a,d & f)** 56f Bolt, Hex Head 1/2 -13 UNC x 1.25" SAE 5, Zinc plated 56g Washer, 1/2" SAE, Zinc plated 90a Bolt, Hex Head 3/8 -16 UNC x 1" SAE 5, Zinc plated 90b Slider, G05/22, 213TC/252BP,L=252*x H=96.5*x W=25.4* Kit No. Kit No. Material No. 96956356 96956377 96983870 97501489 N/A N/A N/A 96956357 97534539 97573873 Qty. Included in each Kit 1 1 1 1 1 1 2 2 2 2 4 4 2 2 97534574 1 1 1 2 2 4 2 4 4 97534579 1 1 1 2 2 1 2 4 2 4 4 97534576 1 1 1 2 2 4 2 4 4 Slider & fastner for 182TC (consists of slider & hardware) 96983869 1 Hardware Kit -96983855/68/78(cont. pos.56f, g, 90a,d& f)** 97501470 1 1 Hardware Kit -96983869/79 (cont. pos.56f & g, 90a, d & f)** 97501488 1 Bolt, Hex Head 1/2 -13 UNC x 1" SAE 5, Zinc plated N/A 2 2 2 Washer, 1/2" SAE, Zinc plated N/A 2 2 2 Bolt, Hex Head 5/16 -18 UNC x .75" SAE 5, Zinc plated N/A 4 4 4 Slider, G05/22 - 56C/245BP, L=204* x H=125.5* x W=25.4* 96956343 2 2 Slider, G05/22 - 182T/245 BP, L=230* x H=100* x W=25.4* 96956342 2 90d Bolt, Hex Head 1/4 -20 UNC x 1" SAE 5, Zinc plated N/A 4 4 4 Bolt, Hex Head 1/4 -20 UNC x 2.5" SAE 5, Zinc plated N/A Washer, 5/16" SAE, Zinc plated N/A 4 4 90f * Values in mm, Length (L) is +/- 2mm, Height (H) is +/- 1mm, Width (W). ** Hardware kits 97501470 and 88 are also available for sale. N/A N/A N/A 56f 56g 90a 90b 1 1 2 2 4 Spare Part Kits CR10-H accessories (Continued) 2 4 4 Baseplate Kit 252 213TC for G05/10/50/60/70/22/33/44 Kit No. 97534539 XLBP2 213TC for G05/10/50/60/70/22/33/44 Kit No. 97573873 Pos. No. Description Material No. Qty. Included in each Kit 96956356 1 90 Baseplate Cpl. 252, L=1321* x W=381* x H=107.9* Baseplate Cpl. XLBP2, L=1777.8* x W=381* x H=107.9* 96956377 1 N/A Slider & fastners for 213TC(consists of slider & hardware) 96983870 1 1 N/A Hardware Kit -96983870/80(cont. of pos.56f, g, 90a,d & f)** 97501489 1 1 56f Bolt, Hex Head 1/2 -13 UNC x 1.25" SAE 5, Zinc plated N/A 2 2 56g Washer, 1/2" SAE, Zinc plated N/A 2 2 90a Bolt, Hex Head 3/8 -16 UNC x 1" SAE 5, Zinc plated N/A 4 4 90b Slider, G05/22, 213TC/252BP,L=252*x H=96.5*x W=25.4* 96956357 2 2 90d Bolt, Hex Head 1/4 -20 UNC x 1.75" SAE 5, Zinc plated N/A 4 4 90f Washer, 3/8" SAE, Zinc plated N/A 4 4 * Values in mm, Length (L) is +/- 2mm, Height (H) is +/- 1mm, Width (W). ** Hardware kit 97501489 is also available for sale. Baseplate Kit 258 254TC for G05/10/50/60/70/22/33/44 Kit No. 97534543 XLBP3 254TC for G05/10/50/60/70/22/33/44 Kit No. 97573876 Pos. No. Description Material No. Qty. Included in each Kit 90 Baseplate Cpl. 258, L=1473.2* x W=457.2* x H=119.1* 96956360 1 96956379 1 Baseplate Cpl. XLBP3, L=2406.4* x W=457.2* x H=119.1* N/A Slider & fastners for 254TC(consists of slider & hardware) 96983871 1 1 N/A Hardware Kit -96983871(cont. of pos.56f & g, 90a,d & f)** 97501493 1 1 56f Bolt, Hex Head 1/2 -13 UNC x 1" SAE 5, Zinc plated N/A 2 2 56g Washer, 1/2" SAE, Zinc plated N/A 2 2 90a Bolt, Hex Head 1/2 -13 UNC x 1.25" SAE 5, Zinc plated N/A 4 4 90b Slider, G05/22, 254TC/258BP, L=354* x H=67* x W=25.4* 96956361 2 2 90d Bolt, Hex Head 1/4 -20 UNC x 1.75" SAE 5, Zinc plated N/A 4 4 90f Washer, 1/2" SAE, Zinc plated N/A 4 4 * Values in mm, Length (L) is +/- 2mm, Height (H) is +/- 1mm, Width (W). ** Hardware kit 97501493 is also available for sale. Page 1 of 1 12 Spare Part Kits • Special Tools CR10-H special tools Tools not generally available from normal sources. Mat. No. Description and Use 00SV0040 Shaft Holder for Dismantling/Assembly Used to hold and protect the shaft during dismantling and assembly. 00SV2107 Tubular Box Spanner for Shaft Seal 41.0 mm Used to install and remove the shaft seal. Fits a 1/2” drive ratchet. 00SV2101 Ring Insert Tool for Shaft Seal + Square 41 mm x 1/2” drive 00SV0239 Puller for Neck Ring Used to remove the Neck Ring from Chamber. 00SV2011 Bit Holder Used with Bits Kit, 1/4” 00SV2010 Bits Kit NV 5 mm for M6, 1/4” NV 6 mm for M8, 1/4” NV 8 mm for M10, 1/4” 00SV2012 Hexagon Socket Bit Used for Shaft Seal NV 2.5 mm for M5, 1/4” 00SV2127 Bearing Removal Punch standard tools In addition to being available from Grundfos, comparable tools can be purchased through normal sources. Mat. No. 13 Description and Use 00SV0083 00SV0055 00SV0054 00SV0122 Wrenches Used to tighten various nuts. NV 10 mm for M6 NV 13 mm for M8 NV 19 mm for M12 NV 24 mm for M16 00SV0292 00SV0269 00SV0400 Torque Wrench Used to torque various screws. 4-20 Nm, 9 x 12 20-100 Nm, 9 x 12 40-200 Nm, 14x18 00SV0438 Torque Screwdriver Used to tighten various nuts. 1-6 Nm, 1/4” 00SV0295 00SV0401 Ratchet Spanner for all Adapters 9 mm x 12 mm, 1/2” 14 mm x 18 mm, 1/2” 00SV0296 00SV0297 00SV0298 Socket Spanner with Inside Hex NV 5 mm for M6, 1/2” x 1/2” NV 6 mm for M8, 1/2” x 1/2” NV 8 mm for M10, 1/2” x 1/2” 00SV0310 00SV0294 00SV0271 00SV0524 Ring Spanner NV 10 mm, 9 x 12, for M6 NV 13 mm, 9 x 12, for M8 NV 19 mm, 9 x 12, for M12 NV 24 mm, 14 x 18, for M16 00SV2013 00SV0267 Socket Spanner NV 13 mm for M8, 1/2” drv. NV 19 mm for M12, 1/2” drv. Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence L-CR-SM-050 11/11 US Subject to alterations. ®2011 Grundfos Pumps Corp. GRUNDFOS Pumps Corporation 17100 W. 118th Terrace Olathe, Kansas 66062 Phone: 913.227.3400 Fax: 913.227.3500 www.grundfos.com GRUNDFOS Canada, Inc. 2941 Brighton Road Oakville, Ontario L6H 6C9 Canada Phone: 905.829.9533 Fax: 905.829.9512 Bombas GRUNDFOS de Mexico S.A. de C.V. Boulevard TLC No. 15 Parque Industrial Stiva Aeropuerto Apodaca, N.L. Mexico 66600 Phone: 52.81.8144.4000 Fax: 52.81.8144.4010
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Create Date : 2011:12:14 13:48:52-08:00 Metadata Date : 2017:09:11 15:55:34-04:00 Modify Date : 2017:09:11 15:55:34-04:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 8425 bytes, use -b option to extract), (Binary data 11212 bytes, use -b option to extract) Instance ID : uuid:f8689972-b69b-410b-b844-b8334556bb64 Document ID : xmp.did:5D21DB6D3506E111A426CBA44F52258E Original Document ID : xmp.did:A74DD515FA7DDE11A8D2ED86F2C5085C Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:A74DD515FA7DDE11A8D2ED86F2C5085C, xmp.iid:A84DD515FA7DDE11A8D2ED86F2C5085C, xmp.iid:A94DD515FA7DDE11A8D2ED86F2C5085C, xmp.iid:AA4DD515FA7DDE11A8D2ED86F2C5085C, xmp.iid:AB4DD515FA7DDE11A8D2ED86F2C5085C, xmp.iid:AC4DD515FA7DDE11A8D2ED86F2C5085C, xmp.iid:AD4DD515FA7DDE11A8D2ED86F2C5085C, xmp.iid:AE4DD515FA7DDE11A8D2ED86F2C5085C, xmp.iid:AF4DD515FA7DDE11A8D2ED86F2C5085C, xmp.iid:B04DD515FA7DDE11A8D2ED86F2C5085C, xmp.iid:6520ED04FF7DDE11A8D2ED86F2C5085C, xmp.iid:6620ED04FF7DDE11A8D2ED86F2C5085C, xmp.iid:6720ED04FF7DDE11A8D2ED86F2C5085C, xmp.iid:6820ED04FF7DDE11A8D2ED86F2C5085C, xmp.iid:6920ED04FF7DDE11A8D2ED86F2C5085C, xmp.iid:6A20ED04FF7DDE11A8D2ED86F2C5085C, xmp.iid:6B20ED04FF7DDE11A8D2ED86F2C5085C, xmp.iid:6C20ED04FF7DDE11A8D2ED86F2C5085C, xmp.iid:5E81ABE7197EDE118284D8F6199CCFEF, xmp.iid:5F81ABE7197EDE118284D8F6199CCFEF, xmp.iid:6081ABE7197EDE118284D8F6199CCFEF, xmp.iid:6181ABE7197EDE118284D8F6199CCFEF, xmp.iid:6281ABE7197EDE118284D8F6199CCFEF, xmp.iid:6381ABE7197EDE118284D8F6199CCFEF, xmp.iid:6481ABE7197EDE118284D8F6199CCFEF, xmp.iid:6581ABE7197EDE118284D8F6199CCFEF, xmp.iid:6681ABE7197EDE118284D8F6199CCFEF, xmp.iid:6781ABE7197EDE118284D8F6199CCFEF, xmp.iid:0FF3476E5880DE118BA6C4ED24E91F43, xmp.iid:10F3476E5880DE118BA6C4ED24E91F43, xmp.iid:F52189E78C54DF11B890D5E39925BCAB, xmp.iid:F62189E78C54DF11B890D5E39925BCAB, xmp.iid:4E42EBE8A44AE011BBE8B69D202B67AB, xmp.iid:4F42EBE8A44AE011BBE8B69D202B67AB, xmp.iid:61F496DD3FC4E011ACE1B04ACE235E1A, xmp.iid:36E0A2DD3FC4E011ACE1B04ACE235E1A, xmp.iid:88AF083A40C4E011ACE1B04ACE235E1A, xmp.iid:89AF083A40C4E011ACE1B04ACE235E1A, xmp.iid:BF7211726CC7E011BE20CFD6BA392136, xmp.iid:C07211726CC7E011BE20CFD6BA392136, xmp.iid:C17211726CC7E011BE20CFD6BA392136, xmp.iid:C27211726CC7E011BE20CFD6BA392136, xmp.iid:81B21ED311D0E0118A13E537AF292D72, xmp.iid:82B21ED311D0E0118A13E537AF292D72, xmp.iid:EEEE738C93E0E01195FCC103396AB0A9, xmp.iid:EFEE738C93E0E01195FCC103396AB0A9, xmp.iid:A72DE85345F4E0119E33DC0465550778, xmp.iid:4915280C5BF4E011A34A99816E25A108, xmp.iid:8BA391F53306E111A426CBA44F52258E, xmp.iid:5D21DB6D3506E111A426CBA44F52258E, xmp.iid:323F07C73806E111A426CBA44F52258E, xmp.iid:333F07C73806E111A426CBA44F52258E, xmp.iid:BF684C213A06E111A426CBA44F52258E, xmp.iid:C0684C213A06E111A426CBA44F52258E, xmp.iid:24D462D93A06E111A426CBA44F52258E, xmp.iid:25D462D93A06E111A426CBA44F52258E, xmp.iid:EC0A3CEE3B06E111A426CBA44F52258E, xmp.iid:ED0A3CEE3B06E111A426CBA44F52258E, xmp.iid:403284663C06E111A426CBA44F52258E, xmp.iid:413284663C06E111A426CBA44F52258E, xmp.iid:423284663C06E111A426CBA44F52258E, xmp.iid:433284663C06E111A426CBA44F52258E, xmp.iid:2891AEAA3E06E111A426CBA44F52258E, xmp.iid:2991AEAA3E06E111A426CBA44F52258E, xmp.iid:22C993CF3F06E111A426CBA44F52258E, xmp.iid:23C993CF3F06E111A426CBA44F52258E, xmp.iid:4F5E73874006E111A426CBA44F52258E, xmp.iid:0A1BB9164206E111A426CBA44F52258E, xmp.iid:0B1BB9164206E111A426CBA44F52258E, xmp.iid:CD0727474206E111A426CBA44F52258E, xmp.iid:CE0727474206E111A426CBA44F52258E, xmp.iid:3026AC6D4206E111A426CBA44F52258E, xmp.iid:3126AC6D4206E111A426CBA44F52258E, xmp.iid:8B2DC9BD4206E111A426CBA44F52258E, xmp.iid:39F2CDBD4206E111A426CBA44F52258E, xmp.iid:3AF2CDBD4206E111A426CBA44F52258E, xmp.iid:3BF2CDBD4206E111A426CBA44F52258E, xmp.iid:62E0735E4706E111A426CBA44F52258E, xmp.iid:63E0735E4706E111A426CBA44F52258E, xmp.iid:10B050774806E111A426CBA44F52258E, xmp.iid:435F45414A06E111A426CBA44F52258E, xmp.iid:83D1117B4A06E111A426CBA44F52258E, xmp.iid:3EB9C0AD4A06E111A426CBA44F52258E, xmp.iid:3FB9C0AD4A06E111A426CBA44F52258E, xmp.iid:CB0380514B06E111A426CBA44F52258E, xmp.iid:79C884514B06E111A426CBA44F52258E, xmp.iid:7AD523EC4D06E111A426CBA44F52258E, xmp.iid:7BD523EC4D06E111A426CBA44F52258E, xmp.iid:0145361D4E06E111A426CBA44F52258E, xmp.iid:F3D0A8A34E06E111A426CBA44F52258E, xmp.iid:C6165E415006E111A426CBA44F52258E, xmp.iid:C7165E415006E111A426CBA44F52258E, xmp.iid:A5C3F4B85106E111A426CBA44F52258E, xmp.iid:A6C3F4B85106E111A426CBA44F52258E, xmp.iid:A130AA775906E111A426CBA44F52258E, xmp.iid:A230AA775906E111A426CBA44F52258E, xmp.iid:17EF52DB5C06E111A426CBA44F52258E, xmp.iid:5D5574515D06E111A426CBA44F52258E, xmp.iid:5E5574515D06E111A426CBA44F52258E, xmp.iid:5F5574515D06E111A426CBA44F52258E, xmp.iid:605574515D06E111A426CBA44F52258E, xmp.iid:615574515D06E111A426CBA44F52258E, xmp.iid:625574515D06E111A426CBA44F52258E, xmp.iid:635574515D06E111A426CBA44F52258E, xmp.iid:645574515D06E111A426CBA44F52258E, xmp.iid:655574515D06E111A426CBA44F52258E, xmp.iid:828821235F06E111A426CBA44F52258E, xmp.iid:D378D69C5F06E111A426CBA44F52258E, xmp.iid:C5A6DC716006E111A426CBA44F52258E, xmp.iid:C6A6DC716006E111A426CBA44F52258E, xmp.iid:C8A6DC716006E111A426CBA44F52258E, xmp.iid:850AF9BA6206E111A426CBA44F52258E, xmp.iid:BFDDA9B56906E111A426CBA44F52258E, xmp.iid:EF45E751F706E11184ABD84FE6130FE7, xmp.iid:F045E751F706E11184ABD84FE6130FE7, xmp.iid:B01D48C1F706E11184ABD84FE6130FE7, xmp.iid:B11D48C1F706E11184ABD84FE6130FE7, xmp.iid:C90ADE939009E1119D8BA4F1D8149C2B, xmp.iid:CA0ADE939009E1119D8BA4F1D8149C2B, xmp.iid:E56729719109E1119D8BA4F1D8149C2B, xmp.iid:662F73DA570AE111858BDE41A4F73A9E, xmp.iid:672F73DA570AE111858BDE41A4F73A9E, xmp.iid:5BE3B7F8570AE111858BDE41A4F73A9E, xmp.iid:6D01DA895E0AE111858BDE41A4F73A9E, xmp.iid:6E01DA895E0AE111858BDE41A4F73A9E, xmp.iid:26BA089A5F0AE111858BDE41A4F73A9E, xmp.iid:4A3787B25F0AE111858BDE41A4F73A9E, xmp.iid:794EF2A9600AE111858BDE41A4F73A9E, xmp.iid:7A4EF2A9600AE111858BDE41A4F73A9E, xmp.iid:E63830B9610AE111858BDE41A4F73A9E, xmp.iid:E73830B9610AE111858BDE41A4F73A9E, xmp.iid:A3A330D1630AE111858BDE41A4F73A9E, xmp.iid:A4A330D1630AE111858BDE41A4F73A9E, xmp.iid:033A8500640AE111858BDE41A4F73A9E, xmp.iid:B1FE8900640AE111858BDE41A4F73A9E, xmp.iid:7693D011000BE1119678E5943D644AC6, xmp.iid:693D4D0C090BE1119678E5943D644AC6, xmp.iid:2FE19BDE260BE1119678E5943D644AC6, xmp.iid:30E19BDE260BE1119678E5943D644AC6, xmp.iid:705E6191DC0EE111A01FCB5119CFC56A, xmp.iid:715E6191DC0EE111A01FCB5119CFC56A, xmp.iid:17A81270DF0EE111A01FCB5119CFC56A, xmp.iid:18A81270DF0EE111A01FCB5119CFC56A, xmp.iid:B12CB216A30FE1118802BE415C49A842, xmp.iid:B22CB216A30FE1118802BE415C49A842, xmp.iid:B37A6A6CA80FE1118802BE415C49A842, xmp.iid:B47A6A6CA80FE1118802BE415C49A842, xmp.iid:4B0E6154CD0FE1118802BE415C49A842, xmp.iid:51CC6099D30FE1118802BE415C49A842, xmp.iid:52CC6099D30FE1118802BE415C49A842, xmp.iid:56C8964C6E10E111BE26B868F07C1A16, xmp.iid:57C8964C6E10E111BE26B868F07C1A16, xmp.iid:2082D45CF920E1118A488BFA62F7D9D8, xmp.iid:A21D02ADF920E1118A488BFA62F7D9D8, xmp.iid:A31D02ADF920E1118A488BFA62F7D9D8, xmp.iid:A41D02ADF920E1118A488BFA62F7D9D8, xmp.iid:3B95078CE024E111B530AE9176C93C21, xmp.iid:1F2849BDE124E111B530AE9176C93C21, xmp.iid:B3D622FBE124E111B530AE9176C93C21, xmp.iid:5FB01908E224E111B530AE9176C93C21, xmp.iid:DD782116E424E111B530AE9176C93C21, xmp.iid:5DBD65A4E624E111B530AE9176C93C21, xmp.iid:618FEFE7E724E111B530AE9176C93C21, xmp.iid:FF8F7941E824E111B530AE9176C93C21, xmp.iid:9E46DC7FEA24E111B530AE9176C93C21, xmp.iid:1EECC8B97526E111938B969E1A3560CC, xmp.iid:1FECC8B97526E111938B969E1A3560CC, xmp.iid:B7E9FF7D7626E111938B969E1A3560CC, xmp.iid:EF6D3C5E7826E111938B969E1A3560CC, xmp.iid:D03C2E7C7B26E111938B969E1A3560CC, xmp.iid:D13C2E7C7B26E111938B969E1A3560CC, xmp.iid:D23C2E7C7B26E111938B969E1A3560CC, xmp.iid:6C37C4167F26E111938B969E1A3560CC, xmp.iid:03B5AF008226E111938B969E1A3560CC, xmp.iid:186EB2E88426E111938B969E1A3560CC, xmp.iid:196EB2E88426E111938B969E1A3560CC, xmp.iid:004F5F438526E111938B969E1A3560CC, xmp.iid:014F5F438526E111938B969E1A3560CC, xmp.iid:024F5F438526E111938B969E1A3560CC, xmp.iid:034F5F438526E111938B969E1A3560CC, xmp.iid:6CD90FB88826E111938B969E1A3560CC, xmp.iid:5209355F9D26E111938B969E1A3560CC History When : 2009:07:31 10:46:32-07:00, 2009:07:31 10:57:11-07:00, 2009:07:31 10:57:11-07:00, 2009:07:31 11:05:06-07:00, 2009:07:31 11:05:06-07:00, 2009:07:31 11:09:03-07:00, 2009:07:31 11:09:03-07:00, 2009:07:31 11:15:23-07:00, 2009:07:31 11:15:23-07:00, 2009:07:31 11:21:52-07:00, 2009:07:31 11:21:52-07:00, 2009:07:31 11:27:53-07:00, 2009:07:31 11:27:53-07:00, 2009:07:31 11:32:33-07:00, 2009:07:31 11:32:33-07:00, 2009:07:31 11:36:24-07:00, 2009:07:31 11:36:24-07:00, 2009:07:31 12:20:59-07:00, 2009:07:31 14:34:19-07:00, 2009:07:31 14:34:19-07:00, 2009:07:31 14:38:22-07:00, 2009:07:31 14:38:22-07:00, 2009:07:31 15:01:50-07:00, 2009:07:31 15:01:50-07:00, 2009:07:31 15:06:29-07:00, 2009:07:31 15:06:29-07:00, 2009:07:31 15:21:46-07:00, 2009:07:31 15:21:46-07:00, 2009:08:03 11:06:56-07:00, 2009:08:03 11:06:56-07:00, 2010:04:30 12:20:41-07:00, 2010:04:30 12:20:41-07:00, 2011:03:09 15:28:16-08:00, 2011:03:09 15:28:16-08:00, 2011:08:11 10:32:20-07:00, 2011:08:11 10:32:20-07:00, 2011:08:11 10:34:55-07:00, 2011:08:11 10:34:55-07:00, 2011:08:15 11:29-07:00, 2011:08:15 11:29-07:00, 2011:08:15 11:29:44-07:00, 2011:08:15 11:29:44-07:00, 2011:08:26 11:32:59-07:00, 2011:08:26 14:35:28-07:00, 2011:09:16 11:41:54-07:00, 2011:09:16 11:41:54-07:00, 2011:10:11 13:12:21-07:00, 2011:10:11 15:47:50-07:00, 2011:11:03 09:03:54-07:00, 2011:11:03 09:03:54-07:00, 2011:11:03 09:27:52-07:00, 2011:11:03 09:27:52-07:00, 2011:11:03 09:37:33-07:00, 2011:11:03 09:37:33-07:00, 2011:11:03 09:42:42-07:00, 2011:11:03 09:42:42-07:00, 2011:11:03 09:50:26-07:00, 2011:11:03 09:50:26-07:00, 2011:11:03 09:53:48-07:00, 2011:11:03 09:53:48-07:00, 2011:11:03 09:59:27-07:00, 2011:11:03 09:59:27-07:00, 2011:11:03 10:10:01-07:00, 2011:11:03 10:10:01-07:00, 2011:11:03 10:18:13-07:00, 2011:11:03 10:18:13-07:00, 2011:11:03 10:23:21-07:00, 2011:11:03 10:34:31-07:00, 2011:11:03 10:34:31-07:00, 2011:11:03 10:35:52-07:00, 2011:11:03 10:35:52-07:00, 2011:11:03 10:36:57-07:00, 2011:11:03 10:36:57-07:00, 2011:11:03 10:39:11-07:00, 2011:11:03 10:39:11-07:00, 2011:11:03 10:51:48-07:00, 2011:11:03 10:51:48-07:00, 2011:11:03 11:12:19-07:00, 2011:11:03 11:12:19-07:00, 2011:11:03 11:20:10-07:00, 2011:11:03 11:32:59-07:00, 2011:11:03 11:34:36-07:00, 2011:11:03 11:36:01-07:00, 2011:11:03 11:36:01-07:00, 2011:11:03 11:40:35-07:00, 2011:11:03 11:40:35-07:00, 2011:11:03 11:59:14-07:00, 2011:11:03 11:59:14-07:00, 2011:11:03 12:00:36-07:00, 2011:11:03 12:04:22-07:00, 2011:11:03 12:15:56-07:00, 2011:11:03 12:15:56-07:00, 2011:11:03 12:26:26-07:00, 2011:11:03 12:26:26-07:00, 2011:11:03 13:21:52-07:00, 2011:11:03 13:21:52-07:00, 2011:11:03 13:46:08-07:00, 2011:11:03 13:49:26-07:00, 2011:11:03 13:51-07:00, 2011:11:03 13:51:53-07:00, 2011:11:03 13:53:21-07:00, 2011:11:03 13:53:21-07:00, 2011:11:03 13:56:10-07:00, 2011:11:03 13:56:10-07:00, 2011:11:03 13:58:19-07:00, 2011:11:03 13:58:19-07:00, 2011:11:03 14:02:27-07:00, 2011:11:03 14:05:52-07:00, 2011:11:03 14:11:49-07:00, 2011:11:03 14:13:13-07:00, 2011:11:03 14:20:26-07:00, 2011:11:03 14:28:11-07:00, 2011:11:03 15:18:08-07:00, 2011:11:04 08:11:49-07:00, 2011:11:04 08:11:49-07:00, 2011:11:04 08:14:56-07:00, 2011:11:04 08:14:56-07:00, 2011:11:07 14:33:55-08:00, 2011:11:07 14:33:55-08:00, 2011:11:07 14:40:07-08:00, 2011:11:08 14:20:24-08:00, 2011:11:08 14:20:24-08:00, 2011:11:08 14:21:14-08:00, 2011:11:08 15:08:15-08:00, 2011:11:08 15:08:15-08:00, 2011:11:08 15:15:52-08:00, 2011:11:08 15:16:33-08:00, 2011:11:08 15:23:28-08:00, 2011:11:08 15:23:28-08:00, 2011:11:08 15:31:03-08:00, 2011:11:08 15:36:39-08:00, 2011:11:08 15:46:02-08:00, 2011:11:08 15:46:02-08:00, 2011:11:08 15:47:21-08:00, 2011:11:08 15:47:21-08:00, 2011:11:09 10:24:32-08:00, 2011:11:09 11:28:48-08:00, 2011:11:09 15:02:16-08:00, 2011:11:09 15:02:16-08:00, 2011:11:14 08:20:29-08:00, 2011:11:14 08:20:29-08:00, 2011:11:14 08:41:01-08:00, 2011:11:14 08:41:01-08:00, 2011:11:15 08:01:33-08:00, 2011:11:15 08:01:33-08:00, 2011:11:15 08:39:44-08:00, 2011:11:15 08:39:44-08:00, 2011:11:15 13:03:55-08:00, 2011:11:15 13:48:48-08:00, 2011:11:15 13:48:48-08:00, 2011:11:16 08:16:11-08:00, 2011:11:16 08:16:11-08:00, 2011:12:07 09:31:57-08:00, 2011:12:07 09:34:11-08:00, 2011:12:07 09:34:59-08:00, 2011:12:07 09:50:28-08:00, 2011:12:12 08:44:23-08:00, 2011:12:12 08:52:55-08:00, 2011:12:12 08:54:39-08:00, 2011:12:12 08:55:01-08:00, 2011:12:12 09:11:25-08:00, 2011:12:12 09:28:01-08:00, 2011:12:12 09:37:04-08:00, 2011:12:12 09:39:34-08:00, 2011:12:12 09:55:38-08:00, 2011:12:14 09:04:46-08:00, 2011:12:14 09:04:46-08:00, 2011:12:14 09:10:15-08:00, 2011:12:14 09:23:41-08:00, 2011:12:14 09:46-08:00, 2011:12:14 09:46-08:00, 2011:12:14 10:11:48-08:00, 2011:12:14 10:11:48-08:00, 2011:12:14 10:32:39-08:00, 2011:12:14 10:53:27-08:00, 2011:12:14 10:53:27-08:00, 2011:12:14 10:56-08:00, 2011:12:14 10:56-08:00, 2011:12:14 10:56:11-08:00, 2011:12:14 11:20:44-08:00, 2011:12:14 11:20:44-08:00, 2011:12:14 13:48:34-08:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /, /metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata Derived From Instance ID : xmp.iid:8BA391F53306E111A426CBA44F52258E Derived From Document ID : xmp.did:36E0A2DD3FC4E011ACE1B04ACE235E1A Derived From Original Document ID: xmp.did:A74DD515FA7DDE11A8D2ED86F2C5085C Derived From Rendition Class : default Doc Change Count : 2921 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 16 Creator : Adobe InDesign CS5 (7.0.4)EXIF Metadata provided by EXIF.tools