Puretek Co PT-3029 Modem Card User Manual 3029

Puretek Industrial Co Ltd Modem Card 3029

users manual

UserUserUserUserUser’’’’’s Manuals Manuals Manuals Manuals ManualVVVVVererererer. A 3029-0008. A 3029-0008. A 3029-0008. A 3029-0008. A 3029-000856K PCI 56K PCI 56K PCI 56K PCI 56K PCI MMMMModemodemodemodemodem
FCC Part 15FCC Part 15FCC Part 15FCC Part 15FCC Part 15Operation is subject to the following twoconditions:1. This device may not cause harmfulinterference.2. This device must accept any interferencereceived including interference that maycause undesired operation.This equipment has been tested and found tocomply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protectionagainst harmful interference when the equipmentis operated in a residential installation. Thisequipment generates, uses, and can radiatefrequency energy and if not installed and used inaccordance with the instructions, may causeharmful interference to radio communications.However, there is no guarantee that the interfer-ence to radio or television reception, which can bedetermined by turning the equipment off and on,the user is encouraged to try to correct theinterference by one or more of the followingmeasures:§ Reorient or relocate the receiving antenna.§ Increase the separation between theequipment and receiver.§ Connect the equipment into an outlet on a
circuit different from that to which thereceiver is connected.§ Consult the dealer or an experienced radio/TV technician for help.Any changes or modifications notexpressly approved by the grantee ofthis device could void the user authorityto operate the equipment.FCC Part 68 NoticeFCC Part 68 NoticeFCC Part 68 NoticeFCC Part 68 NoticeFCC Part 68 NoticeThis equipment complies with Part 68 of the FCCrules. On the base of this unit is a label thatcontains, among other information, the FCCregistration number and Ringer EquivalenceNumber (REN) for this equipment. If requested,this information must be given to your telephonecompany.The REN is used to determine the quantity ofdevices you may connect to your telephone lineand still have all of those devices ring when yournumber is called. In most, but not all areas, thesum of the RENs of all devices should not exceedfive (5.0). To be certain of the number of devicesyou may connect to your line, as determined bythe total RENs, you should call your local tel-ephone company to determine the maximum RENsfor your calling area.If the telephone company suspects a problem withyour telephone line is related to an add-onCaution
electronic device, such as your modem, they havethe right to temporarily suspend your service. It isyour responsibility to remove from the telephoneline any malfunctioning electronic communicationsequipment to avoid damage to the telephonesystem.If your equipment causes harm to the telephonenetwork, the telephone company may discontinueyour service temporarily. If possible, they will notifyyou in advance. But if advance notice is notpractical, you will be notified as soon as possible.You will be informed of your right to file a com-plaint with the FCC. Your telephone company maymake changes to its facilities, equipment, opera-tions, or procedures that could affect the properfunctioning of your equipment. If they do, you willbe notified in advance to give you an opportunityto maintain uninterrupted telephone service.The telephone company may ask that you discon-nect this equipment from the network until theproblem has been corrected or until you are surethat the equipment is not malfunctioning.This equipment may not be used on coin serviceprovided by the telephone company. Connectionto party lines is subjected to state tariffs.If you experience trouble with this telephoneequipment, please contact your place of purchasefor information on obtaining service or repairs.
TTTTTable of Contentsable of Contentsable of Contentsable of Contentsable of ContentsChapter 1 IntroductionChapter 1 IntroductionChapter 1 IntroductionChapter 1 IntroductionChapter 1 IntroductionYour Modem ..................................... 1Features............................................... 2 System Requirements......................... 2Package Checklist .............................. 3Chapter 2 InstallationsChapter 2 InstallationsChapter 2 InstallationsChapter 2 InstallationsChapter 2 Installations Hardware Installation .............. ........... 4 Installation Procedures for Windows NT4.0 driver ............ .......... 5 Installation Procedures for Windows 98 driver ................. ......... 6 Installation of Procedures for Windows 2000 driver ...................... 10 AT Command .................................... 11
Chapter 1IntroductionIntroductionIntroductionIntroductionIntroductionThe Voice/Fax/Data Modem connects your computerto Internet, and all kinds of BBS, and other popularFax / Modems. This manual describes the features,procedures of installations, and AT command set...etc. of this modem.YYYYYour modem...our modem...our modem...our modem...our modem...There are indicator lights and connectors on thefront and back side of this modem. Following isthe meaning of these light and connectors foryour reference: 1. External Front Panel 1. External Front Panel 1. External Front Panel 1. External Front Panel 1. External Front PanelRD : Received Data indicator.TD : Transmitted Data indicator.CD : Carrier Detect indicator.OH : Off Hook.MR : Modem Ready.PHONE : Phone jack.LINE : Telephone line jack.RS232 : RS232 cable socket.AC-IN : AC adapter input.ON/OFF : Power switch.2. External Rear Panel2. External Rear Panel2. External Rear Panel2. External Rear Panel2. External Rear Panel1
2Chapter 1FeaturesFeaturesFeaturesFeaturesFeaturesThis modem supports the following communica-tion standards. ITU-T is known as CCITT.DataDataDataDataData ITU-T V.90 z ITU-T V.34, V.32bis, V.32, V.22bis, V.22 Bell 103 & 212A V.42bis & MNP 5 ( Data compression ) V.42 & MNP2-4 ( Error correction )FaxFaxFaxFaxFaxV.17 ( 14400bps FAX )V.29 ( 9600bps FAX )V.27ter ( 4800bps FAX )zzzzzzzVVVVVoiceoiceoiceoiceoiceVoice/Audio modezSystem RequirementsSystem RequirementsSystem RequirementsSystem RequirementsSystem RequirementsWindows NT 4.0, Windows 95, Windows 98,Windows 2000.
3Chapter 1The package contains the following items:One fax modemOne piece of phone cableOne CD One AC AdaptopThe fax modem Quick Installation GuideIf any of these items are missing or damaged,please contact your dealer or sales representativefor assistance.zzOne piece of RS-232 cablezzzPackage ChecklistPackage ChecklistPackage ChecklistPackage ChecklistPackage Checklistz
4Chapter 2InstallationsInstallationsInstallationsInstallationsInstallationsThis chapter describes how to install and poweron you fax modem.Hardware InstallationHardware InstallationHardware InstallationHardware InstallationHardware InstallationBefore complete the hardware installation be aware not to power on the modem1. Plug the male end of the RS-232RS-232RS-232RS-232RS-232 cable into the connector marked RS-232RS-232RS-232RS-232RS-232 ( ) on the back of the modem.2. Plug the other end of this cable into the serial port on the back of your computer.3. ( Be sure your modem is Power off ) Plug the power cable into the AC-INAC-INAC-INAC-INAC-IN connector ( ) on the back of the modem.ef4. Plug the power adapter into a wall outlet.
5Chapter 27. Turn your modem on( ). The MR MR MR MR MR lights should light up.8. Turn your computer on.g5. Plug one end of the phone cable into the modem‘s LINELINELINELINELINE jack ( ). Plug the other end into the phone outlet.6. To use telephone and the modem on the same line, plug one end of the optional phone cable into the PHONE PHONE PHONE PHONE PHONE jack( ) on the modem; plug the other end into the phone. Lift the telephone handset and listen for a DIALDIALDIALDIALDIALTONE TONE TONE TONE TONE to check the connection.Windows NT4.0 DriverWindows NT4.0 DriverWindows NT4.0 DriverWindows NT4.0 DriverWindows NT4.0 Drivercd1. When enter to the Winnt operating system,select the modem item in the control panel,the following dialog box will appear, pleaseselect “do not detect my modem…”, thenclick Next.2. Select install from disk, the following dialogbox appear, please specify the path of thedriver, e.g. D:\Drivers\winnt4, then clickNext.3. Varies type of modems will show in a dialogbox, please select ( “Topic 56000bps ExternalFax Voice Modem”), then click Next.Installation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures for
1. Once you have completed the hardwareinstallation, power on your computer.When running Win 98, your system willdetect a new device and the followingmessage will appear. click Next .6Chapter 24. Please select the COM port which attach toyour modem, then click Next5. You have installed the modem successfully .6. If you want to configure the setting of yourmodem, please select the modem item inthe control panel, a dialog box with modemstatus will appear.2. Select the “search for the best driver foryour device (Recommended)” option, thenclick Next . Installation ProceduresInstallation ProceduresInstallation ProceduresInstallation ProceduresInstallation Procedures for for for for forWindows 98 DirverWindows 98 DirverWindows 98 DirverWindows 98 DirverWindows 98 Dirver
7Chapter 23. Place the disk containing the driver of Win 9Xinto your floppy disk drive. Specify thelocation of the modem driver, e.g.D:\Drivers\WIN9x\TOP.INF . click Next .4. The following message will appear. click Next .
5. The installation has been completed. clickFinish.8Chapter 26. After the installation of Fax Voice Modem was completed, your system will detect Wave Device for Voice Modem and the following message will appear . click Next and then you could follow Step2 to Step5 to finish the installation .
9Chapter 2
Installation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures for1. Once you have completed the hardware installation, power on your computer. When running Win 2000, your system will detect a new device. click Next.2. Select the “search for the best driver for your device (Recommended) “option, then click Next.3. Place the disk containing the driver of Win 2000 into your floppy disk drive. Select the “specify location”, then click Next.4. Browse the proper location of the driver path, e.g. D:\Drivers\WIN2000, then cilck Next. 5. Click Nexit.6. Please read the Digital Signature, then click Yes.7. To complete the installation, click Finish.10Chapter 2Windows 2000Windows 2000Windows 2000Windows 2000Windows 2000 Driver Driver Driver Driver Driver
11Chapter 2AAAAAT CommandT CommandT CommandT CommandT CommandMost people use the communication softwareprograms to tell modems what to do. Therefore,you may not use the commands in this chapter.However, if you prefer to communicate with yourmodem directly, you can type the commandsdescribed below.This chapter describes how to work in theterminal mode.The disk contains detail of AT commands.(file path:D :\ATCOMMAND.PDF)PK-MAN-0142
Quick Installation GuideQuick Installation GuideQuick Installation GuideQuick Installation GuideQuick Installation GuideVVVVVererererer. B 3030-0007. B 3030-0007. B 3030-0007. B 3030-0007. B 3030-0007Fax ModemFax ModemFax ModemFax ModemFax Modem
TTTTTable of Contentsable of Contentsable of Contentsable of Contentsable of ContentsChapter 1 IntroductionChapter 1 IntroductionChapter 1 IntroductionChapter 1 IntroductionChapter 1 IntroductionYour Modem ..................................... 1Features............................................... 2 System Requirements......................... 2Package Checklist .............................. 3Chapter 2 InstallationsChapter 2 InstallationsChapter 2 InstallationsChapter 2 InstallationsChapter 2 Installations Hardware Installation .............. ........... 4 Installation Procedures for Windows NT4.0 driver ............ .......... 5 Installation Procedures for Windows 98 driver ................. ......... 6 Installation of Procedures for Windows 2000 driver ...................... 10 AT Command .................................... 11
Chapter 1IntroductionIntroductionIntroductionIntroductionIntroductionThe Voice/Fax/Data Modem connects your computerto Internet, and all kinds of BBS, and other popularFax / Modems. This manual describes the features,procedures of installations, and AT command set...etc. of this modem.YYYYYour modem...our modem...our modem...our modem...our modem...There are indicator lights and connectors on thefront and back side of this modem. Following isthe meaning of these light and connectors foryour reference: 1. External Front Panel 1. External Front Panel 1. External Front Panel 1. External Front Panel 1. External Front PanelRD : Received Data indicator.TD : Transmitted Data indicator.CD : Carrier Detect indicator.OH : Off Hook.MR : Modem Ready.PHONE : Phone jack.LINE : Telephone line jack.RS232 : RS232 cable socket.AC-IN : AC adapter input.ON/OFF : Power switch.2. External Rear Panel2. External Rear Panel2. External Rear Panel2. External Rear Panel2. External Rear Panel1
2Chapter 1FeaturesFeaturesFeaturesFeaturesFeaturesThis modem supports the following communica-tion standards. ITU-T is known as CCITT.DataDataDataDataData ITU-T V.90 z ITU-T V.34, V.32bis, V.32, V.22bis, V.22 Bell 103 & 212A V.42bis & MNP 5 ( Data compression ) V.42 & MNP2-4 ( Error correction )FaxFaxFaxFaxFaxV.17 ( 14400bps FAX )V.29 ( 9600bps FAX )V.27ter ( 4800bps FAX )zzzzzzzVVVVVoiceoiceoiceoiceoiceVoice/Audio modezSystem RequirementsSystem RequirementsSystem RequirementsSystem RequirementsSystem RequirementsWindows NT 4.0, Windows 95, Windows 98,Windows 2000.
3Chapter 1The package contains the following items:One fax modemOne piece of phone cableOne CD One AC AdaptopThe fax modem Quick Installation GuideIf any of these items are missing or damaged,please contact your dealer or sales representativefor assistance.zzOne piece of RS-232 cablezzzPackage ChecklistPackage ChecklistPackage ChecklistPackage ChecklistPackage Checklistz
4Chapter 2InstallationsInstallationsInstallationsInstallationsInstallationsThis chapter describes how to install and poweron you fax modem.Hardware InstallationHardware InstallationHardware InstallationHardware InstallationHardware InstallationBefore complete the hardware installation be aware not to power on the modem1. Plug the male end of the RS-232RS-232RS-232RS-232RS-232 cable into the connector marked RS-232RS-232RS-232RS-232RS-232 ( ) on the back of the modem.2. Plug the other end of this cable into the serial port on the back of your computer.3. ( Be sure your modem is Power off ) Plug the power cable into the AC-INAC-INAC-INAC-INAC-IN connector ( ) on the back of the modem.ef4. Plug the power adapter into a wall outlet.
5Chapter 27. Turn your modem on( ). The MR MR MR MR MR lights should light up.8. Turn your computer on.g5. Plug one end of the phone cable into the modem‘s LINELINELINELINELINE jack ( ). Plug the other end into the phone outlet.6. To use telephone and the modem on the same line, plug one end of the optional phone cable into the PHONE PHONE PHONE PHONE PHONE jack( ) on the modem; plug the other end into the phone. Lift the telephone handset and listen for a DIALDIALDIALDIALDIALTONE TONE TONE TONE TONE to check the connection.Windows NT4.0 DriverWindows NT4.0 DriverWindows NT4.0 DriverWindows NT4.0 DriverWindows NT4.0 Drivercd1. When enter to the Winnt operating system,select the modem item in the control panel,the following dialog box will appear, pleaseselect “do not detect my modem…”, thenclick Next.2. Select install from disk, the following dialogbox appear, please specify the path of thedriver, e.g. D:\Drivers\winnt4, then clickNext.3. Varies type of modems will show in a dialogbox, please select ( “Topic 56000bps ExternalFax Voice Modem”), then click Next.Installation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures for
1. Once you have completed the hardwareinstallation, power on your computer.When running Win 98, your system willdetect a new device and the followingmessage will appear. click Next .6Chapter 24. Please select the COM port which attach toyour modem, then click Next5. You have installed the modem successfully .6. If you want to configure the setting of yourmodem, please select the modem item inthe control panel, a dialog box with modemstatus will appear.2. Select the “search for the best driver foryour device (Recommended)” option, thenclick Next . Installation ProceduresInstallation ProceduresInstallation ProceduresInstallation ProceduresInstallation Procedures for for for for forWindows 98 DirverWindows 98 DirverWindows 98 DirverWindows 98 DirverWindows 98 Dirver
7Chapter 23. Place the disk containing the driver of Win 9Xinto your floppy disk drive. Specify thelocation of the modem driver, e.g.D:\Drivers\WIN9x\TOP.INF . click Next .4. The following message will appear. click Next .
5. The installation has been completed. clickFinish.8Chapter 26. After the installation of Fax Voice Modem was completed, your system will detect Wave Device for Voice Modem and the following message will appear . click Next and then you could follow Step2 to Step5 to finish the installation .
9Chapter 2
Installation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures for1. Once you have completed the hardware installation, power on your computer. When running Win 2000, your system will detect a new device. click Next.2. Select the “search for the best driver for your device (Recommended) “option, then click Next.3. Place the disk containing the driver of Win 2000 into your floppy disk drive. Select the “specify location”, then click Next.4. Browse the proper location of the driver path, e.g. D:\Drivers\WIN2000, then cilck Next. 5. Click Nexit.6. Please read the Digital Signature, then click Yes.7. To complete the installation, click Finish.10Chapter 2Windows 2000Windows 2000Windows 2000Windows 2000Windows 2000 Driver Driver Driver Driver Driver
11Chapter 2AAAAAT CommandT CommandT CommandT CommandT CommandMost people use the communication softwareprograms to tell modems what to do. Therefore,you may not use the commands in this chapter.However, if you prefer to communicate with yourmodem directly, you can type the commandsdescribed below.This chapter describes how to work in theterminal mode.The disk contains detail of AT commands.(file path:D :\ATCOMMAND.PDF)PK-MAN-0142
TTTTTable of Contentsable of Contentsable of Contentsable of Contentsable of ContentsChapter 1 IntroductionChapter 1 IntroductionChapter 1 IntroductionChapter 1 IntroductionChapter 1 IntroductionYour Modem ..................................... 1Features............................................... 2 System Requirements......................... 2Package Checklist .............................. 3Chapter 2 InstallationsChapter 2 InstallationsChapter 2 InstallationsChapter 2 InstallationsChapter 2 Installations Hardware Installation .............. ........... 4 Installation Procedures for Windows NT4.0 driver ............ .......... 5 Installation Procedures for Windows 98 driver ................. ......... 6 Installation of Procedures for Windows 2000 driver ...................... 10 AT Command .................................... 11
Chapter 1IntroductionIntroductionIntroductionIntroductionIntroductionThe Voice/Fax/Data Modem connects your computerto Internet, and all kinds of BBS, and other popularFax / Modems. This manual describes the features,procedures of installations, and AT command set...etc. of this modem.YYYYYour modem...our modem...our modem...our modem...our modem...There are indicator lights and connectors on thefront and back side of this modem. Following isthe meaning of these light and connectors foryour reference: 1. External Front Panel 1. External Front Panel 1. External Front Panel 1. External Front Panel 1. External Front PanelRD : Received Data indicator.TD : Transmitted Data indicator.CD : Carrier Detect indicator.OH : Off Hook.MR : Modem Ready.PHONE : Phone jack.LINE : Telephone line jack.RS232 : RS232 cable socket.AC-IN : AC adapter input.ON/OFF : Power switch.2. External Rear Panel2. External Rear Panel2. External Rear Panel2. External Rear Panel2. External Rear Panel1
2Chapter 1FeaturesFeaturesFeaturesFeaturesFeaturesThis modem supports the following communica-tion standards. ITU-T is known as CCITT.DataDataDataDataData ITU-T V.90 z ITU-T V.34, V.32bis, V.32, V.22bis, V.22 Bell 103 & 212A V.42bis & MNP 5 ( Data compression ) V.42 & MNP2-4 ( Error correction )FaxFaxFaxFaxFaxV.17 ( 14400bps FAX )V.29 ( 9600bps FAX )V.27ter ( 4800bps FAX )zzzzzzzVVVVVoiceoiceoiceoiceoiceVoice/Audio modezSystem RequirementsSystem RequirementsSystem RequirementsSystem RequirementsSystem RequirementsWindows NT 4.0, Windows 95, Windows 98,Windows 2000.
3Chapter 1The package contains the following items:One fax modemOne piece of phone cableOne CD One AC AdaptopThe fax modem Quick Installation GuideIf any of these items are missing or damaged,please contact your dealer or sales representativefor assistance.zzOne piece of RS-232 cablezzzPackage ChecklistPackage ChecklistPackage ChecklistPackage ChecklistPackage Checklistz
4Chapter 2InstallationsInstallationsInstallationsInstallationsInstallationsThis chapter describes how to install and poweron you fax modem.Hardware InstallationHardware InstallationHardware InstallationHardware InstallationHardware InstallationBefore complete the hardware installation be aware not to power on the modem1. Plug the male end of the RS-232RS-232RS-232RS-232RS-232 cable into the connector marked RS-232RS-232RS-232RS-232RS-232 ( ) on the back of the modem.2. Plug the other end of this cable into the serial port on the back of your computer.3. ( Be sure your modem is Power off ) Plug the power cable into the AC-INAC-INAC-INAC-INAC-IN connector ( ) on the back of the modem.ef4. Plug the power adapter into a wall outlet.
5Chapter 27. Turn your modem on( ). The MR MR MR MR MR lights should light up.8. Turn your computer on.g5. Plug one end of the phone cable into the modem‘s LINELINELINELINELINE jack ( ). Plug the other end into the phone outlet.6. To use telephone and the modem on the same line, plug one end of the optional phone cable into the PHONE PHONE PHONE PHONE PHONE jack( ) on the modem; plug the other end into the phone. Lift the telephone handset and listen for a DIALDIALDIALDIALDIALTONE TONE TONE TONE TONE to check the connection.Windows NT4.0 DriverWindows NT4.0 DriverWindows NT4.0 DriverWindows NT4.0 DriverWindows NT4.0 Drivercd1. When enter to the Winnt operating system,select the modem item in the control panel,the following dialog box will appear, pleaseselect “do not detect my modem…”, thenclick Next.2. Select install from disk, the following dialogbox appear, please specify the path of thedriver, e.g. D:\Drivers\winnt4, then clickNext.3. Varies type of modems will show in a dialogbox, please select ( “Topic 56000bps ExternalFax Voice Modem”), then click Next.Installation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures for
1. Once you have completed the hardwareinstallation, power on your computer.When running Win 98, your system willdetect a new device and the followingmessage will appear. click Next .6Chapter 24. Please select the COM port which attach toyour modem, then click Next5. You have installed the modem successfully .6. If you want to configure the setting of yourmodem, please select the modem item inthe control panel, a dialog box with modemstatus will appear.2. Select the “search for the best driver foryour device (Recommended)” option, thenclick Next . Installation ProceduresInstallation ProceduresInstallation ProceduresInstallation ProceduresInstallation Procedures for for for for forWindows 98 DirverWindows 98 DirverWindows 98 DirverWindows 98 DirverWindows 98 Dirver
7Chapter 23. Place the disk containing the driver of Win 9Xinto your floppy disk drive. Specify thelocation of the modem driver, e.g.D:\Drivers\WIN9x\TOP.INF . click Next .4. The following message will appear. click Next .
5. The installation has been completed. clickFinish.8Chapter 26. After the installation of Fax Voice Modem was completed, your system will detect Wave Device for Voice Modem and the following message will appear . click Next and then you could follow Step2 to Step5 to finish the installation .
9Chapter 2
Installation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures for1. Once you have completed the hardware installation, power on your computer. When running Win 2000, your system will detect a new device. click Next.2. Select the “search for the best driver for your device (Recommended) “option, then click Next.3. Place the disk containing the driver of Win 2000 into your floppy disk drive. Select the “specify location”, then click Next.4. Browse the proper location of the driver path, e.g. D:\Drivers\WIN2000, then cilck Next. 5. Click Nexit.6. Please read the Digital Signature, then click Yes.7. To complete the installation, click Finish.10Chapter 2Windows 2000Windows 2000Windows 2000Windows 2000Windows 2000 Driver Driver Driver Driver Driver
11Chapter 2AAAAAT CommandT CommandT CommandT CommandT CommandMost people use the communication softwareprograms to tell modems what to do. Therefore,you may not use the commands in this chapter.However, if you prefer to communicate with yourmodem directly, you can type the commandsdescribed below.This chapter describes how to work in theterminal mode.The disk contains detail of AT commands.(file path:D :\ATCOMMAND.PDF)PK-MAN-0142
TTTTTable of Contentsable of Contentsable of Contentsable of Contentsable of ContentsChapter 1 IntroductionChapter 1 IntroductionChapter 1 IntroductionChapter 1 IntroductionChapter 1 IntroductionYour Modem ..................................... 1Features............................................... 2 System Requirements......................... 2Package Checklist .............................. 3Chapter 2 InstallationsChapter 2 InstallationsChapter 2 InstallationsChapter 2 InstallationsChapter 2 Installations Hardware Installation .............. ........... 4 Installation Procedures for Windows NT4.0 driver ............ .......... 5 Installation Procedures for Windows 98 driver ................. ......... 6 Installation of Procedures for Windows 2000 driver ...................... 10 AT Command .................................... 11
Chapter 1IntroductionIntroductionIntroductionIntroductionIntroductionThe Voice/Fax/Data Modem connects your computerto Internet, and all kinds of BBS, and other popularFax / Modems. This manual describes the features,procedures of installations, and AT command set...etc. of this modem.YYYYYour modem...our modem...our modem...our modem...our modem...There are indicator lights and connectors on thefront and back side of this modem. Following isthe meaning of these light and connectors foryour reference: 1. External Front Panel 1. External Front Panel 1. External Front Panel 1. External Front Panel 1. External Front PanelRD : Received Data indicator.TD : Transmitted Data indicator.CD : Carrier Detect indicator.OH : Off Hook.MR : Modem Ready.PHONE : Phone jack.LINE : Telephone line jack.RS232 : RS232 cable socket.AC-IN : AC adapter input.ON/OFF : Power switch.2. External Rear Panel2. External Rear Panel2. External Rear Panel2. External Rear Panel2. External Rear Panel1
2Chapter 1FeaturesFeaturesFeaturesFeaturesFeaturesThis modem supports the following communica-tion standards. ITU-T is known as CCITT.DataDataDataDataData ITU-T V.90 z ITU-T V.34, V.32bis, V.32, V.22bis, V.22 Bell 103 & 212A V.42bis & MNP 5 ( Data compression ) V.42 & MNP2-4 ( Error correction )FaxFaxFaxFaxFaxV.17 ( 14400bps FAX )V.29 ( 9600bps FAX )V.27ter ( 4800bps FAX )zzzzzzzVVVVVoiceoiceoiceoiceoiceVoice/Audio modezSystem RequirementsSystem RequirementsSystem RequirementsSystem RequirementsSystem RequirementsWindows NT 4.0, Windows 95, Windows 98,Windows 2000.
3Chapter 1The package contains the following items:One fax modemOne piece of phone cableOne CD One AC AdaptopThe fax modem Quick Installation GuideIf any of these items are missing or damaged,please contact your dealer or sales representativefor assistance.zzOne piece of RS-232 cablezzzPackage ChecklistPackage ChecklistPackage ChecklistPackage ChecklistPackage Checklistz
4Chapter 2InstallationsInstallationsInstallationsInstallationsInstallationsThis chapter describes how to install and poweron you fax modem.Hardware InstallationHardware InstallationHardware InstallationHardware InstallationHardware InstallationBefore complete the hardware installation be aware not to power on the modem1. Plug the male end of the RS-232RS-232RS-232RS-232RS-232 cable into the connector marked RS-232RS-232RS-232RS-232RS-232 ( ) on the back of the modem.2. Plug the other end of this cable into the serial port on the back of your computer.3. ( Be sure your modem is Power off ) Plug the power cable into the AC-INAC-INAC-INAC-INAC-IN connector ( ) on the back of the modem.ef4. Plug the power adapter into a wall outlet.
5Chapter 27. Turn your modem on( ). The MR MR MR MR MR lights should light up.8. Turn your computer on.g5. Plug one end of the phone cable into the modem‘s LINELINELINELINELINE jack ( ). Plug the other end into the phone outlet.6. To use telephone and the modem on the same line, plug one end of the optional phone cable into the PHONE PHONE PHONE PHONE PHONE jack( ) on the modem; plug the other end into the phone. Lift the telephone handset and listen for a DIALDIALDIALDIALDIALTONE TONE TONE TONE TONE to check the connection.Windows NT4.0 DriverWindows NT4.0 DriverWindows NT4.0 DriverWindows NT4.0 DriverWindows NT4.0 Drivercd1. When enter to the Winnt operating system,select the modem item in the control panel,the following dialog box will appear, pleaseselect “do not detect my modem…”, thenclick Next.2. Select install from disk, the following dialogbox appear, please specify the path of thedriver, e.g. D:\Drivers\winnt4, then clickNext.3. Varies type of modems will show in a dialogbox, please select ( “Topic 56000bps ExternalFax Voice Modem”), then click Next.Installation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures for
1. Once you have completed the hardwareinstallation, power on your computer.When running Win 98, your system willdetect a new device and the followingmessage will appear. click Next .6Chapter 24. Please select the COM port which attach toyour modem, then click Next5. You have installed the modem successfully .6. If you want to configure the setting of yourmodem, please select the modem item inthe control panel, a dialog box with modemstatus will appear.2. Select the “search for the best driver foryour device (Recommended)” option, thenclick Next . Installation ProceduresInstallation ProceduresInstallation ProceduresInstallation ProceduresInstallation Procedures for for for for forWindows 98 DirverWindows 98 DirverWindows 98 DirverWindows 98 DirverWindows 98 Dirver
7Chapter 23. Place the disk containing the driver of Win 9Xinto your floppy disk drive. Specify thelocation of the modem driver, e.g.D:\Drivers\WIN9x\TOP.INF . click Next .4. The following message will appear. click Next .
5. The installation has been completed. clickFinish.8Chapter 26. After the installation of Fax Voice Modem was completed, your system will detect Wave Device for Voice Modem and the following message will appear . click Next and then you could follow Step2 to Step5 to finish the installation .
9Chapter 2
Installation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures forInstallation Procedures for1. Once you have completed the hardware installation, power on your computer. When running Win 2000, your system will detect a new device. click Next.2. Select the “search for the best driver for your device (Recommended) “option, then click Next.3. Place the disk containing the driver of Win 2000 into your floppy disk drive. Select the “specify location”, then click Next.4. Browse the proper location of the driver path, e.g. D:\Drivers\WIN2000, then cilck Next. 5. Click Nexit.6. Please read the Digital Signature, then click Yes.7. To complete the installation, click Finish.10Chapter 2Windows 2000Windows 2000Windows 2000Windows 2000Windows 2000 Driver Driver Driver Driver Driver
11Chapter 2AAAAAT CommandT CommandT CommandT CommandT CommandMost people use the communication softwareprograms to tell modems what to do. Therefore,you may not use the commands in this chapter.However, if you prefer to communicate with yourmodem directly, you can type the commandsdescribed below.This chapter describes how to work in theterminal mode.The disk contains detail of AT commands.(file path:D :\ATCOMMAND.PDF)PK-MAN-0142
Table of ContentsIntroduction1 Features2 System Requirements2 Package ChecklistInstallations3 Hardware Installation4 Driver InstallationProcedures or Win NT 4.04 Driver InstallationProcedures for Win 987 Driver InstallationProcedures for Win 2000
IntroductionIntroductionIntroductionIntroductionIntroductionThe Voice/Fax/Data PCI Modem connects yourcomputer to Internet, all kinds of BBS, and otherfax modems. This manual describes the features,installation procedures and AT commands.PhonePhonePhonePhonePhone Phone jackLineLineLineLineLine Telephone line jack To Phone To LineFeaturesFeaturesFeaturesFeaturesFeaturesThis modem supports the following communica-tion standards. ITU-T is known as CCITT. Data Data Data Data DataITU-T V.90K56flexITU-T V.34, V.32bis, V.32, V.22bis, V.22Bell 103 & 212AV.42bis & MNP 5 (Data Compression)V.42 & MNP2-4 (Error Correction) Fax Fax Fax Fax FaxV.17 (14400bps FAX)V.29 (9600bps FAX)V.27ter (4800bps FAX)11111
V V V V VoiceoiceoiceoiceoiceVoice/Audio mode (through Soundcard)Full-Duplex speakerphone(through Soundcard)System RequirementsSystem RequirementsSystem RequirementsSystem RequirementsSystem RequirementsWindows™ 95, Windows™ 98,Windows™ 2000, or Windows™ NT200MHz Pentium™ CPUSound Card16MB RAMPackage ChecklistPackage ChecklistPackage ChecklistPackage ChecklistPackage ChecklistThe package contains the following items:One fax modem cardOne piece of phone cableOne CDThe fax modem user’s manualIf any of these items are missing or damaged,please contact your dealer or sales representativefor assistance.22222
InstallationsInstallationsInstallationsInstallationsInstallationsThis chapter describes how to install and poweron you fax modem.Hardware InstallationHardware InstallationHardware InstallationHardware InstallationHardware Installation1. Make sure that your computer is switched off.Unplug the power cord from the wall socket.Also turn off all other peripherals you may haveattached to your computer. Remove yourcomputer cover.2. Select a free PCI slot. Remove the cover fromthe slot. Keep the screw. You will be using it inthe next step.3. Carefully slide the internal modem into thechosen slot. Press firmly on the top of themodem to seat it. Fasten the modem to yoursystem with the screw you removed in theprevious step. Replace the computer’s cover.4. Plug one end of the phone cable into theLine jack on your fax modem. The other end ofthe phone cable should be connected directly tothe phone outlet.33333
444445. If you desire, you could connect your phone tothe modem’s Phone jack.6. Turn on your computer.Driver Installation ProceduresDriver Installation ProceduresDriver Installation ProceduresDriver Installation ProceduresDriver Installation Proceduresfor Windows™ NT4.0for Windows™ NT4.0for Windows™ NT4.0for Windows™ NT4.0for Windows™ NT4.0The Modem driver for Windows NT 4.0 is Data / Faxonly, there is no speakerphone or TAM supported.1. After entering to the Win NT 4.0 system, placethe provided CD into the CD ROM drive.2. Specify the location of the modem driver, e.g. E:\Driver\Winnt4\sm56set, then the installation willstart to operate.3. After the installation, restart your computer.You are now ready to use the modem.Driver Installation ProceduresDriver Installation ProceduresDriver Installation ProceduresDriver Installation ProceduresDriver Installation Proceduresfor Windows™ 98for Windows™ 98for Windows™ 98for Windows™ 98for Windows™ 981. Once you have completed the hardwareinstallation, power on your computer. Whenrunning Win 98, your system will detect a newdevice and the following message will appear.Click Next Next Next Next Next.
3. Place the CD containing driver for Win 9X intoyour CD ROM drive. Select the Specify a locationoption, then click Browse. Specify the path of thedriver, e.g., E:\Drivers\WIN9x. Click NextNextNextNextNext.2. Select the Search for the best driver forSearch for the best driver forSearch for the best driver forSearch for the best driver forSearch for the best driver foryour device (Recommended) optionyour device (Recommended) optionyour device (Recommended) optionyour device (Recommended) optionyour device (Recommended) option, thenclick NextNextNextNextNext.55555
5. To complete the installation, click FinishFinishFinishFinishFinish.4. The following message will appear. ClickNextNextNextNextNext and the installation process will begin.66666
777771. Once you have completed the hardwareinstallation, power on your computer. Whenrunning Win 2000, your system will detect anew device and appear a massage saying tohelp you install a device driver for a hardwaredevice. Click NextNextNextNextNext.2. The Found New Hardware Wizard will askyou what to do. Select the Search for aSearch for aSearch for aSearch for aSearch for asuitable driver for my devicesuitable driver for my devicesuitable driver for my devicesuitable driver for my devicesuitable driver for my device(recommended)(recommended)(recommended)(recommended)(recommended) option, and click Next Next Next Next Next.3. The Found New Hardware will ask youwhere to search for driver files, select the CD-CD-CD-CD-CD-ROM drivesROM drivesROM drivesROM drivesROM drives option, then click NextNextNextNextNext.Driver Installation ProceduresDriver Installation ProceduresDriver Installation ProceduresDriver Installation ProceduresDriver Installation Proceduresfor Windows™ 2000for Windows™ 2000for Windows™ 2000for Windows™ 2000for Windows™ 2000
PK-MAN-01484. The Found New Hardware Wizard will tell youWindows found a driver for PCI SimpleCommuncation Controller. To install the driverthat Windows found, click NextNextNextNextNext, then theinstallation will start to operate.5. After the installation, restart your computer.You are now ready to use the modem.88888

Navigation menu