Pyramid Car Audio Amplifier Pb 1000 Users Manual PB700 1100 1500 2600 1200 1700 2200 2700B

PB 2600 to the manual f1000daa-c6f0-4e15-9120-19108b5d9dce

: Pyramid-Car-Audio Pyramid-Car-Audio-Pyramid-Car-Audio-Car-Amplifier-Pb-1000-Users-Manual-522147 pyramid-car-audio-pyramid-car-audio-car-amplifier-pb-1000-users-manual-522147 pyramid-car-audio pdf

Open the PDF directly: View PDF .
Page Count: 27

Download
Open PDF In Browser	View PDF

USER'S MANUAL

PB
PB
PB
PB
PB

7 0 0
1000
1100
1500
2600

PB
PB
PB
PB

1200
1700
2200
2700

www.pyramidcaraudio.com

congratulations...
on your purchase of a Pyramid America Series
amplifier. This amplifier extends the Pyramid
tradition into a totally new series of amps,
designed from the ground up to deliver the
power, performance and flexibility the modern
car audio enthusiast demands.

When you check the list of features offered by
the PB 700, PB 1000, PB 1100, PB 1200, PB 1500,
PB 1700, PB 2200, PB 2600, PB 2700, you’ll know
you made the right choice with a Pyramid
Power amplifier.

table of contents

1

general features

2

general features

3

general features

4

2 ch amp PB 700 • PB 1000 • PB 1100 • PB 1500 • PB 2600

pb 7 0 0

power LED
protection LED

pb 1 0 0 0

Remote Bass Boost

pb 1 1 0 0
pb 1 5 0 0
pb 2600

high pass frequency control
low pass frequency control
bass boost level
crossover mode selector

high level inputs
low level inputs
input level control

speaker connections

power terminals

power fuse

5

features and specifications
2 ch amp PB 700 • PB 1000

crossover mode selector

input level control

low pass frequency control
high pass frequency control
Remote Bass Boost
bass boost level control

when used with normal, full range systems, set this switch to “FULL.” If
you wish to use the internal crossover to power a driver of specific frequency
range, use the “LOWPASS” or “HIGHPASS” settings.
use this control to match the outputs of your head unit to the amplifier.
Starting with your head unit set at about the 2 o’clock position, increase
the amp level control until distortion begins to occur, and reduce slightly
from this point.
when the crossover selector switch is in “low pass” mode, this control
sets the upper frequency limit for audio program sent to the speakers.
when the crossover selector switch is in “high pass” mode, this control
sets the lower frequency limit for audio program sent to the speakers.
Plug in the Remote Bass Boost Control wire in here.
this control permits adjustment of the bass level up to an increase of
approximately 18 dB.

low level inputs

this amp features gold-plated RCA input jacks for high impedance input.
Use these with car stereo output which uses RCA-type connector cables.

high level inputs

if your car stereo lacks RCA-type output jacks, you may connect speaker
output leads to these input connectors.

output power @ 14.4v DC, 1KHz
RMS Power @ 4 Ohms
RMS Power @ 2 Ohms
Maximum Power Output

10K Ohms
100 Ohms

input sensitivity
low level inputs
high level inputs

250mV
2.5V

protection LED

this indicator is illuminated when built-in protection circuitry is activated.

power fuse

the fuse protects the amplifier and your car’s electrical system from short
circuit conditions.

dimensions (W x H x L)
mm
inches

power terminals

use these connectors to deliver power, ground and remote turn-on control
to the amplifier.
these terminals are 14K gold plated to guarantee high conductivity and
minimum signal loss.

6

14.4V DC Neg. Ground (10.5-16V)

matching speaker impedance
stereo mode
bridged mode
maximum current draw

speaker connections

15 Hz-30 KHz

input impedance
low level inputs
high level inputs

this indicator is illuminated when power is applied.

power LED

40 Watts x 2 50 Watts x 2 50 Watts x 2
60 Watts x 2 70 Watts x 2 75 Watts x 2
350 Watts x 2 500 Watts x 2 550 Watts x 2

frequency response

power supply voltage

• PB 1100

2-4 Ohms
4-8 Ohms
15A
271 x 60 x 175
10.7 x 2.4 x 6.9

15A

15A

271 x 60 x 190
10.7 x 2.4 x 7.5

271 x 60 x 210
10.7 x 2.4 x 8.3

features and specifications
2 ch amp PB 1500 • PB 2600

crossover mode selectors

input level controls

low pass frequency controls

high pass frequency controls

CH3/4 Remote Bass Boost
bass boost level controls

when used with normal, full range systems, set these switches to “FULL.”
If you wish to use the internal crossovers to power a driver of specific
frequency range, use the “LOWPASS” or “HIGHPASS” settings.
use these controls to match the outputs of your head unit to the amplifier.
Starting with your head unit set at about the 2 o’clock position, increase
the amp level controls until distortion begins to occur, and reduce slightly
from this point.
when one or both of the crossover selector switches is in “low pass”
mode, one can set the upper frequency limit for audio program sent to
the speakers.
when the one or both of crossover selector switch is in “high pass” mode,
one can set the lower frequency limit for audio program sent to the
speakers.
Plug in the Remote Bass Boost Control wire in here.
this control permits adjustment of the bass level up to an increase of
approximately 18 dB in either or both pairs of channels.

low level inputs

this amp features gold-plated RCA input jacks for high impedance input.
Use these with car stereo output which uses RCA-type connector cables.

high level inputs

if your car stereo lacks RCA-type output jacks, you may connect speaker
output leads to these input connectors.

power LED

this indicator is illuminated when power is applied.

protection LED

this indicator is illuminated when built-in protection circuitry is activated.

power fuse

the fuse protects the amplifier and your car’s electrical system from short
circuit conditions.

power terminals

use these connectors to deliver power, ground and remote turn-on control
to the amplifier.

speaker connections

these terminals are 14K gold plated to guarantee high conductivity and
minimum signal loss.

output power @ 14.4v DC, 1KHz
RMS Power @ 4 Ohms
RMS Power @ 2 Ohms
Maximum Power Output

65 Watts x 2
125 Watts x 2
750 Watts x 2

frequency response

90 Watts x 2
150 Watts x 2
1300 Watts x 2

15 Hz-30 KHz

input impedance
low level inputs
high level inputs

10K Ohms
100 Ohms

input sensitivity
low level inputs
high level inputs

250mV
2.5V

power supply voltage

7

14.4V DC Neg. Ground (10.5-16V)

matching speaker impedance
stereo mode
bridged mode

2-4 Ohms
4-8 Ohms

maximum current draw

20 A

30 A

dimensions (W x H x L)
mm
inches

271 x 60 x 250
10.7 x 2.4 x 9.8

271 x 60 x 300
10.7 x 2.4 x 11.8

features and controls

4 ch amp PB 1200 • PB 1700 • PB 2200 • PB 2700
Remote Bass Boost

pb 1200

ch 3/4 input level control

ch 1/2 input level control

ch 3/4 high level inputs

ch 1/2 high level inputs

ch 3/4 low level inputs
ch 3/4 crossover mode selector switch
ch 3/4 bass boost level control
ch 3/4 low pass frequency control
ch 3/4 high pass frequency control

ch 1/2 low level inputs
ch 1/2 crossover mode selector switch
ch 1/2 bass boost level control
ch 1/2 low pass frequency control
ch 1/2 high pass frequency control

pb 1700
pb 2200
pb 2700

protection LED
power LED

speaker connections

power terminals

power fuse

8

features and specifications
4 ch amp PB 1200 • PB 1700

9

features and specifications
4 ch amp PB 2200 • PB 2700

10

electrical connections
2 ch amp PB 700 • PB 1000 • PB 1100
PB 1500 • PB 2600

pb 7 0 0
pb 1 0 0 0
pb 1 1 0 0
pb 1 5 0 0

11

pb 2600

12V battery
head unit

to remote turn-on
+12V

electrical connections

4 ch amp PB 1200 • PB 1700 • PB 2200 • PB 2700

pb 1200
pb 1700
pb 2200
pb 2700

12
12V battery

to remote turn-on
+12V

head unit

stereo input connections
using

low level inputs

2 ch amp PB 700 • PB 1000 • PB 1100
PB 1500 • PB 2600

pb 7 0 0
pb 1 0 0 0
pb 1 1 0 0

head unit

pb 1 5 0 0

13

L/R Audio
Outputs

pb 2600

Y Adaptors

using

high level inputs
head unit

L

L

R

from speaker terminals

R

PLEASE NOTE! If using high level
inputs, do not use the low level RCA
inputs at the same time!

mono input connections
using

low level inputs

2 ch amp PB 700 • PB 1000 • PB 1100
PB 1500 • PB 2600

pb 7 0 0
pb 1 0 0 0
pb 1 1 0 0

head unit

pb 1 5 0 0
pb 2600

14

To a second amplifier
Y Adaptors

using

high level inputs

PLEASE NOTE! If using high level
inputs, do not use the low level RCA
inputs at the same time!

head unit

To a second amplifier

L

L

R

wiring harness

R
wiring harness

from speaker terminals

Stereo input connections

4 ch amp PB 1200 • PB 1700 • PB 2200 • PB 2700
4 CH Stereo input connections using

low level inputs

pb 1 2 0 0
pb 1 7 0 0
pb 2200
pb 2700

L/R FRONT
Audio Outputs
L/R REAR
Audio Outputs

2 CH Stereo input connections using

low level inputs

R
Y adaptors

L

head unit

15

high level Stereo input connections
4 ch amp PB 1200 • PB 1700 • PB 2200 • PB 2700

4 CH floating ground connections
4 CH floating ground connections
pb 1 2 0 0
pb 1 7 0 0
pb 2200
pb 2700

16
4 CH harness wiring for common ground connections
CH 3/4
REAR

L

R

L

ORANGE

FRONT
ORANGE

BLACK

BLACK

BLACK

REAR

L

R

L

R

FRONT

BLACK

ORANGE

ORANGE
from speaker terminals

PLEASE NOTE! If using high level inputs,
do not use the low level RCA inputs at the
same time!

R

CH 1/2

ORANGE

ORANGE

BLACK

BLACK

BLACK

BLACK

ORANGE

ORANGE
from speaker terminals

mono input connections

4 ch amp PB 1200 • PB 1700 • PB 2200 • PB 2700
4 CH mono input connections using

low level inputs

pb 1 2 0 0
pb 1 7 0 0
pb 2200
pb 2700

head unit
LEFT FRONT Audio Outputs
RIGHT FRONT Audio Outputs

LEFT REAR Audio Outputs

RIGHT REAR Audio Outputs

2 CH mono input connections using

low level inputs

L
Y adaptors

R

17

high level mono input connections
4 ch amp PB 1200 • PB 1700 • PB 2200 • PB 2700

4 CH floating ground connections

pb 1 2 0 0
pb 1 7 0 0

4 CH harness wiring
for common ground connections

pb 2200
pb 2700

18
R

L

ORANGE

ORANGE

BLACK

BLACK

BLACK

BLACK

ORANGE

ORANGE
from speaker terminals

PLEASE NOTE! If using high level inputs, do
not use the low level RCA inputs at the same
time!

speaker connections
2 ch amp PB 700 • PB 1000 • PB 1100
PB 1500 • PB 2600

Stereo Output Mode

pb 7 0 0
pb 1 0 0 0
pb 1 1 0 0
pb 1 5 0 0

19

pb 2600

Bridged Mono Output Mode
LEFT speaker

RIGHT speaker

speaker

MINIMUM
SPEAKER
IMPEDANCE
4 OHMS!

speaker connections

4 ch amp PB 1200 • PB 1700 • PB 2200 • PB 2700
4 CH Output Mode
pb 1 2 0 0
pb 1 7 0 0
pb 2200
pb 2700
L
FRONT speakers

R

L

20

R
REAR speakers

Bridged Dual Mono Output Mode

MINIMUM
SPEAKER
IMPEDANCE
4 OHMS!

speakers
L

R

speaker connections

4 ch amp PB 1200 • PB 1700 • PB 2200 • PB 2700

2 CH Stereo Output Mode with Subwoofer Output
pb 1 2 0 0
pb 1 7 0 0
pb 2200
pb 2700

21

R
L
SUBWOOFER

SPEAKERS

MINIMUM
SPEAKER
IMPEDANCE
4 OHMS!

mounting and installation

22

protection
circuitry

troubleshooting

23

precautions

notes

24

15



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Page Count                      : 27
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:d1352aa2-cf1e-490b-a66f-be35789d80a7
Producer                        : Acrobat Distiller 6.0 (Windows)
Modify Date                     : 2006:03:31 11:44:18-05:00
Create Date                     : 2006:03:31 11:43:37-05:00
Metadata Date                   : 2006:03:31 11:44:18-05:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:b27452b9-0b3d-40ff-9024-f2931b53c027
Format                          : application/pdf
Title                           : PB700-1000-1100-1500-2600-1200-1700-2200-2700B.pdf
Creator                         : Ariw1
Author                          : Ariw1

EXIF Metadata provided by EXIF.tools