QI SHENGLONG IST QSLHB202 Bluetooth Adapter User Manual 27M RF Mouse

Download:
Mirror Download [FCC.gov]
Document ID	1825105
Application ID	u9ylsqENLqzg7s63NxSW6w==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.29kB (153601 bits)
Date Submitted	2012-10-29 00:00:00
Date Available	2012-10-29 00:00:00
Creation Date	2012-07-25 17:31:44
Producing Software	PDFlib 7.0.3 (C++/Win32)
Document Lastmod	2012-10-12 18:15:01
Document Title	27M RF Mouse
Document Creator	WPS Office 个人版
Document Author:	Jackie Shih

Bluetooth Adapter instruction
1． Product Appearance
② ：Micro-USB Charging port
①:On/Off Pairing power
③：3.5mm stereo output
⑤：Indicator
④ BT indicator status
Function and characteristics
2．Function
This is a signal equipment for Bluetooth adapter , with a Micro-USB charging port and
3.5mm stereo turn interface, with 180maH lithium-ion battery, can repeat charging and
have a function of state. It's convenient to bluetooth pairing connection, simple
practical, good audio quality and so on.
2
3: Using method
3.1: Bluetooth pairing connection
3．1．1： The first paring connection: Turn on press "POWER/ID” button for 5
seconds ,you can see the red and blue lights continuous rapid flashes about 2 times
Continue to hold it about 2 seconds untill the red.blue lights flashing alternately，at
this time the machine is forced into pairing mode.
3．1．2： You will need to pair the other equipment,make it into pairing mode. Refer to
your BT adapter manual
3．1．3：When you searching the device, showed "FH-011" ,if prompting, you need to
input the password or PIN and input "0000" ,when the blue lights is blinking rapidly for
several times ,that's in pairing mode.
3．1．4：If two device have matching before，when press “POWER/ID” for 5
seconds next pairing , see the red and blue lights at the same time,release the button,
this to be automatic matching with another bluetooth equipment,when the red and blue
lights continuous rapid flashes two times, pairing successfully .if there is no automatic
matching connection, pairing again.
3．1．5：Turn off ，press “POWER/ID” for 4 seconds, untill seeing the red, blue lights
quik flashing alternately for two times and then release the button.
3.2: Charging and state instructions
The equipment with Micro-USB to connect 5V DC power charging (can not support
data connection. When charging, the red indicator display. About two hours,charging is
over. The red indicator out automatically.
3.3: Audio output connection
When the bluetooth pairing successfully, can receive the audio signal from the
bluetooth equipment, From the 3.5mm stereo output audio signal, 3.5mm stereo can
connect with headphones or audio output interface .
Bluetooth feature
4．Bluetooth
Bluetooth compatible: V3.0+EDR。 compatible with 1.1, 1.2, 2.0 or 2.1 version
Bluetooth transmission distance ≥10M
RF Frequency： 2402 – 2480 MHZ；
Continuous Play time：6-8 hours
Standby time： 120-150 hours
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Create Date                     : 2012:07:25 17:31:44+08:00
Creator Tool                    : WPS Office 个人版
Modify Date                     : 2012:10:12 18:15:01+08:00
Metadata Date                   : 2012:10:12 18:15:01+08:00
Format                          : application/pdf
Creator                         : Jackie Shih
Title                           : 27M RF Mouse
Producer                        : PDFlib 7.0.3 (C++/Win32)
Document ID                     : uuid:11266826-ccff-437c-afd6-fe19c933f6a5
Instance ID                     : uuid:d805afb1-231d-4ea1-817e-a8c770afd050
Page Count                      : 3
Author                          : Jackie Shih

EXIF Metadata provided by EXIF.tools