Qiaohua D WIRELESS DOORBELL(TRANSMITTER) User Manual

SHENZHEN QIAOHUA INDUSTRIES LIMITED WIRELESS DOORBELL(TRANSMITTER) Users Manual

User Manual

D UserManualQH-1085Can be hung on the wal through the nail hole on theback side.2X1.5V AA batter operatedkeep the code-matching button on the receiver pushed, andpush the button of the transmitter at the same time. Releasethe code-matching button on the receiver as soon as the bellrings, and then release the button of the transmitteraccordingly. In this case, the code matching of the doorbellset is finished.LED FLASHING INDICATORTUNES SELECTION SWITCH (16 tunesselectalbe)VOLUME SWITCH (low,mediumor high)RING OPTION SWITCH:ring only,or LEDflash only,or combination of ring and flashHigh Quality LoudspeakerCan be put on the bable with the]click-in baseWater proof push button with LED IndicatorName plateWireless Digital Doorchimes
1.5V AA alkaline batteryReceiverLoad in battery and replace the coverBatteryBatterycoverSteel NailWallHang on the wallFCC NOTEThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device maynot cause harmful interference, and (2) this device must accept anyinterference received,including interference that may cause undesiredoperation.THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TVINTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS ORCHANGETO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULDVOID ANDCHANGE ANNTENA WHICH THE MANUFACTURER PROVIDES.IT IS THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.This equipment has been tested and found to comply with the limits for aClass Bdigital device, pursuant to part 15 of the FCC Rules. These limits aredesigned toprovide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequenc y energyand, if notinstalled and used in accordance with the in structions, may cause harmfulinterferenceto radio communications. However, there is no guarantee thatinterference will notoccur in a particular insta llation. If this equipment does cause harmfulinterference toradio or television reception, which can be determined by turning theequipment offand on, the user is encouraged to try to corr ect the interference by one ormore of thefollowing measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that towhich thereceiver is connected.-- Consult the dealer or an experien ced radio/TV technician for help.To maintain compliance with FCC’s RF exposure guidelines, thisequipment should beinstalled and operated with a minimum distance of 20cm between theradiator and yourbody.：Use double sided tape to fix the unit-.to the desired placeUse a minus driver to carefullyopen the top cover of the unit.Set a battery into the battery compartment incorrect polarity direction.Set the fastening tab of the topcover into the slot of the basePress here by hand to fix the topcover onto the base.

Navigation menu