Qiaohua D WIRELESS DOORBELL(TRANSMITTER) User Manual
SHENZHEN QIAOHUA INDUSTRIES LIMITED WIRELESS DOORBELL(TRANSMITTER) Users Manual
Qiaohua >
User Manual
D UserManual LED FLASHING INDICATOR TUNES SELECTION SWITCH (16 tunes selectalbe) VOLUME SWITCH (low,medium or high) RING OPTION SWITCH:ring only,or LED flash only,or combination of ring and flash High Quality Loudspeaker Can be put on the bable with the] click-in base Water proof push button with LED Indicator Name plate Can be hung on the wal through the nail hole on the back side. QH-1085 Wireless Digital Doorchimes keep the code-matching button on the receiver pushed, and push the button of the transmitter at the same time. Release the code-matching button on the receiver as soon as the bell rings, and then release the button of the transmitter accordingly. In this case, the code matching of the doorbell set is finished. 2X1.5V AA batter operated Set the fastening tab of the top cover into the slot of the base Use double-sided tape to fix the unit to the desired place. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID AND CHANGE ANNTENA WHICH THE MANUFACTURER PROVIDES. IT IS THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. Press here by hand to fix the top cover onto the base. Use a minus driver to carefully open the top cover of the unit. FCC NOTEďź This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation. Set a battery into the battery compartment in correct polarity direction. 1.5V AA alkaline battery Steel Nail Wall Battery Battery cover Hang on the wall Receiver Load in battery and replace the cover This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi dential installation. This equipment generates, uses and can radiate radio frequenc y energy and, if not installed and used in accordance with the in structions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular insta llation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to corr ect the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experien ced radio/TV technician for help. To maintain compliance with FCCâs RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2013:08:27 19:29:09+08:00 Create Date : 2013:08:12 14:11:58+08:00 Metadata Date : 2013:08:27 19:29:09+08:00 Format : application/pdf Title : <51482D3130383520A3A844A3A920CBB5C3F7CAE92E636472> Creator : Administrator Document ID : uuid:220ef915-f804-4c6a-84f7-bb172d0542f5 Instance ID : uuid:409eddd9-fd11-4dbb-8109-73bd31469f40 Page Count : 2 Author : AdministratorEXIF Metadata provided by EXIF.tools