QUEST USA BABHP Build A Bear Plush Headphones User Manual bab plush headphones 11 24

QUEST USA CORP Build A Bear Plush Headphones bab plush headphones 11 24

Contents

User Manual

Power ON / OFF:Power on: Push and hold the “●” button to turn on the headphone. The player will enter into Bluetooth mode automatically while you turn on.Power off: Push and hold the “●” button to turn off the headphone.Bluetooth function● Bluetooth pairing: turn on the headphone and enter Bluetooth mode (the indicator will be red and flash), then use your mobile or other electronic equipment which have Bluetooth function to search the headphone, its pairing name is “QA100”.● Bluetooth re-pairing: any electronic equipment which you have paired the Bluetooth with this headphone will connect the headphone automatically as soon as they are in the same place and keep within 10m in the range, and only the two with Bluetooth are under turn on status.● Listen music: under Bluetooth mode, you just play the music on mobile or any other equipment paired, and then you can enjoy the music by the headphone.60 mm80 mmPause/Play music: Simply press the pause/ play “●” button located on headphone Volume up: press and hold the “ + ” buttonVolume Down: press and hold the “ - ” buttonNext song: press once the “ + ” buttonPrevious song: press once the “ - ” button● Incoming call: During incoming calls the headphone will acknowledge there is an incoming call. If music is playing , it will mute the music and announce the phone number calling you .To accept the call, press the phone/pause/pay “●” button.● End call: Press the phone/pause/pay “●” button.Charge itPower Source: Built-in rechargeable battery.Recharging: Plug the micro USB cable into the micro USB port on the side of the headset, & connect the other end of the cable with any compatible charger or wall outlet.When charging, the LED indicator will glow red.When full charged, the LED indicator will turn off.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.WarningChanges or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help.SPECIFICATIONS:Version: BT V4.0Battery: 3.7V 300mAhPlay time: About 3hCharging time: About 2hFrequency Response: 20-20KHzSpeaker sensitivity: 103dB±3dBBluetooth distance: About 10m

Navigation menu