Qcom Technology LR802UKN2-B 802.11 b/g/n Wireless USB Module User Manual LR802UKN2 B Manual

Download:
Mirror Download [FCC.gov]
Document ID	2001249
Application ID	8qu2aR5BtGPRdOMN+MDvVw==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	127.48kB (1593484 bits)
Date Submitted	2013-06-26 00:00:00
Date Available	2013-06-26 00:00:00
Creation Date	2012-09-18 09:38:32
Producing Software	Acrobat Distiller 9.5.2 (Windows)
Document Lastmod	2013-06-25 14:36:04
Document Title	Microsoft Word - LR802UKN2-B_Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	DING

LR802UKN2-B
User’s Manual
Contents:
WINDOWS VISTA ...................................................................................3
Driver Installation ........................................................................................................ 3
Uninstalling the Wireless LAN Card.......................................................................... 6
Configuring the Wireless LAN Card.......................................................................... 9
Connecting to an existing network ......................................................................... 9
WINDOWS 7 ........................................................................................... 11
Driver Installation ...................................................................................................... 11
Uninstalling the Wireless LAN Card........................................................................ 14
Configuring the Wireless LAN Card........................................................................ 17
Connecting to an existing network ....................................................................... 17
WINDOWS XP SP3 ................................................................................19
Driver Installation ...................................................................................................... 19
Uninstalling the Wireless LAN Card........................................................................ 23
Configuring the Wireless LAN Card........................................................................ 26
Connecting to an existing network ....................................................................... 26
Windows Vista
Driver Installation
1.
For installing the Wireless LAN Card driver, go to the directory where the
Wireless Adapter Installation stored, then double-click the Setup Program
to begin the installation.
(Exsample:
IS_AP_STA_RT2870_D-3.2.9.0_VA-3.2.9.0_W7-3.2.9.0_RU-4.1.7.0_AU-4.1.3.0
_042412_1.5.19.0WP_Free.exe)
2.
Ralink Wireless Network Card Setup Wizard will install the driver on your
system. Select "I accept the terms of the license agreement" and then click
"Next" to accept the License Agreement.
3.
Select "Install driver and Ralink WAN Utility" and then click "Next".
4.
Click "Install" to begin the driver installation.
5.
The Ralink Wireless LAN driver is installing. Please wait.
6.
The installation is now complete.
7.
When you complete the installation, the utility icon will appear on the system
tray (
Please click "Finish".
). You could double-click it to configure
wireless network settings.
Uninstalling the Wireless LAN Card
1.
For uninstalling the Wireless LAN Card, please go to: Start  All Programs 
Ralink Wireless under Windows environment. Then click "Uninstall –
RT2870".
2.
Ralink Wireless LAN Setup Wizard prepares to uninstall the driver on your
system. Please wait.
3.
Click "Yes" to uninstall the Wireless LAN Card driver and utility.
4.
Wait for removing the driver and utility.
5.
The driver uninstall complete, please click "Finish".
Configuring the Wireless LAN Card
Double-click the utility icon
in your system tray to begin the utility
configuration.
Connecting to an existing network
1.
Select icon
, all available Access Points would be listed.
Click on the desired Access Point, and click icon
2.
If you connect to a secured network please type the network security key or
passphrase and then click “
” to connect.
10
Windows 7
Driver Installation
1.
For installing the Wireless LAN Card driver, go to the directory where the
Wireless Adapter Installation stored, then double-click the Setup Program
to begin the installation.
(Exsample:
IS_AP_STA_RT2870_D-3.2.9.0_VA-3.2.9.0_W7-3.2.9.0_RU-4.1.7.0_AU-4.1.3.0
_042412_1.5.19.0WP_Free.exe)
2.
Ralink Wireless Network Card Setup Wizard will install the driver on your
system. Select "I accept the terms of the license agreement" and then click
"Next" to accept the License Agreement.
11
3.
Select "Install driver and Ralink WAN Utility" and then click "Next".
4.
Click "Install" to begin the driver installation.
12
5.
The Ralink Wireless LAN driver is installing. Please wait.
6.
The installation is now complete.
7.
When you complete the installation, the utility icon will appear on the system
tray (
Please click "Finish".
). You could double-click it to configure wireless
network settings.
13
Uninstalling the Wireless LAN Card
1.
For uninstalling the Wireless LAN Card, please go to: Start  All Programs 
Ralink Wireless under Windows environment. Then click "Uninstall –
RT2870".
14
2.
Ralink Wireless LAN Setup Wizard prepares to uninstall the driver on your
system. Please wait.
3.
Click "Yes" to uninstall the Wireless LAN Card driver and utility.
4.
Wait for removing the driver and utility.
15
5.
The driver uninstall complete, please click "Finish".
16
Configuring the Wireless LAN Card
Double-click the utility icon
configuration.
in your system tray to begin the utility
Connecting to an existing network
1.
Select icon
, all available Access Points would be listed.
Click on the desired Access Point, and click icon
17
2.
If you connect to a secured network please type the network security key or
passphrase and then click “
” to connect.
18
Windows XP SP3
Driver Installation
1.
For installing the Wireless LAN Card driver, go to the directory where the
Wireless Adapter Installation stored, then double-click the Setup Program
to begin the installation.
(Exsample:
IS_AP_STA_RT2870_D-3.2.9.0_VA-3.2.9.0_W7-3.2.9.0_RU-4.1.7.0_AU-4.1.3.
0_042412_1.5.19.0WP_Free.exe)
2.
Ralink Wireless Network Card Setup Wizard will install the driver on your
system. Select "I accept the terms of the license agreement" and then click
"Next" to accept the License Agreement.
19
3.
Select "Install driver and Ralink WAN Utility" and then click "Next".
4.
Click "Ralink Configuration Tool" and then click "Next".
20
5.
Click "Install" to begin the driver installation.
6.
The Ralink Wireless LAN driver is installing. Please wait.
21
7.
The installation is now complete.
Note:
8.
Please click "Finish".
If you have installed the Windows XP Service Pack 2. You can use the
Windows Zero Configuration Tool for Wireless Configuring. Please refer
the Windows XP User’s Guide.
When you complete the installation, the utility icon will appear on the system
tray (
). You could double-click it to configure wireless network settings.
22
Uninstalling the Wireless LAN Card
1.
For uninstalling the Wireless LAN Card, please go to: Start  All Programs 
Ralink Wireless under Windows environment. Then click "Uninstall –
RT2870".
23
2.
Ralink Wireless LAN Setup Wizard prepares to uninstall the driver on your
system. Please wait.
3.
Click "Yes" to uninstall the Wireless LAN Card driver and utility.
4.
Wait for removing the driver and utility.
24
5.
The driver uninstall complete, please click "Finish".
25
Configuring the Wireless LAN Card
Double-click the utility icon
in your system tray to begin the utility
configuration.
Connecting to an existing network
1.
Select icon
, all available Access Points would be listed.
Click on the desired Access Point, and click icon
2.
to connect.
If you connect to a secured network please type the network security key or
passphrase and then click “
” to connect.
26
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Note: The country code selection is for non-US model only and is not
available to all US model. Per FCC regulation, all WiFi product marketed in
US must fixed to US operation channels only.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the
antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or
antenna.
As long as 2 conditions above are met, further transmitter test will not be
required. However, the OEM integrator is still responsible for testing their
end-product for any additional compliance requirements required with this
module installed
IMPORTANT NOTE: In the event that these conditions can not be met (for
example certain laptop configurations or co-location with another transmitter),
then the FCC authorization is no longer considered valid and the FCC ID can
not be used on the final product. In these circumstances, the OEM integrator will
be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna
may be installed such that 20 cm may be maintained between the antenna and
users. The final end product must be labeled in a visible area with the following:
“Contains FCC ID: RUJ-LR802UKN2-B”. The grantee's FCC ID can be used
only when all FCC compliance requirements are met.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user’s manual of the
end product which integrates this module.
The end user manual shall include all required regulatory information/warning as
show in this manual.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Annotate, Fill forms
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Format                          : application/pdf
Title                           : Microsoft Word - LR802UKN2-B_Manual.doc
Creator                         : DING
Create Date                     : 2012:09:18 09:38:32+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2013:06:25 14:36:04+08:00
Metadata Date                   : 2013:06:25 14:36:04+08:00
Producer                        : Acrobat Distiller 9.5.2 (Windows)
Document ID                     : uuid:4affa863-bdbc-4501-a626-ff786b8b0de9
Instance ID                     : uuid:28d4fad1-c09f-493a-8035-8f14082199cc
Page Count                      : 29
Author                          : DING

EXIF Metadata provided by EXIF.tools