Qisda H18T HSDPA PCI EXPRESS MINI CARD MODULE User Manual H18T 2010 04 06

Download:
Mirror Download [FCC.gov]
Document ID	1270341
Application ID	GWq3VjfYeQd915wdOg1EWA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	109.63kB (1370377 bits)
Date Submitted	2010-04-21 00:00:00
Date Available	2010-04-22 00:00:00
Creation Date	2010-04-13 16:38:37
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2010-04-13 16:38:37
Document Title	Microsoft Word - H18T_user manual_2010_04_06.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Vinci.Chen

H18T Datasheet
Datasheet
H18T
HSDPA PCI Express mini card module
Datasheet
Rev. 0.6
2010/04/06
Copyright Qisda Corporation
This document contains proprietary technical information which is the property of Qisda
Corporation and is issued in strict confidential and shall not be disclosed to others parties in
whole or in parts without written permission of Qisda Corporation. The documents contain
information on a product, which is under development and is issued for customer evaluation
purposes only. Qisda may make changes to product specifications at any time, without notice.
Qisda Corporation
Mobile Communications BG
18 JiHu Road, Nei-Hu, Taipei 114, Taiwan, R.O.C.
Tel: +886-2-2799-8800
Fax: +886-2-2656-6390
http://www.Qisda.com
HISTORY
Version
Date
Notes
VER: 0.1
2009-NOV-05
PRELIMINARY VERSION
VER:0.2
2009-DEC-24
UPDATED THICKNESS INFORMATION
VER:0.3
2010-JAN-29
UPDATED PRODUCT PICTURE IN COVER PAGE
VER:0.4
2010-MAR-12
REMOVE “E-DCH” SPECIFICATION DUE TO NO SUPPORT HSUPA
VER:0.5
2010-MAR-19
UPDATED THE PEAK POWER CONDUMPTION PARAMETRIC
VER:0.6
2010-APR-06
UPDATED USIM DESIGN APPLICATION
1. INTRODUCTION..................................................................................................... 4
1.1 Description ...................................................................................................4
1.2 Application Device....................................................................................4
2. FEATURES ............................................................................................................... 5
2.1 General Characteristics ...........................................................................5
2.2 RF Functionalities ........................................................................................6
3. HARDWARE DESCRIPTION .................................................................................. 10
3.1 System Interface.......................................................................................10
3.2 Functional Diagram .................................................................................11
3.3 Pin Assignment and Description ..........................................................12
3.4 Terminal Definition....................................................................................14
3.5 Electrical Characteristics .......................................................................16
3.6 Environmental ...........................................................................................19
3.7 Physical Package ....................................................................................20
4. SOFTWARE CHARACTERISTICS ........................................................................... 23
4.1 Introduction................................................................................................23
4.2 Software Architecture .............................................................................23
4.3 Supported OS ............................................................................................24
1. INTRODUCTION
1.1 Description
Overview
This document describes all the functions, features, and interfaces of the HSDPA PCI
Express Mini Card Module – H18T from Qisda. Qisda H18T HSDPA module supports tri-band
WCDMA/HSDPA and quad-band GSM/GPRS/EDGE network connection capability.
Qisda H18T HSDPA card can provides high speed data connection, the data speed of
downlink and uplink path is up to 3.6Mbps and 384Kbps respectively. Furthermore, users can
ease to use this module by using the “HSPA Modem” application software that we provide for
Windows XP and Vista system.
With the Qisda H18T HSDPA module, devices are enhanced in both functionality and
usability based on state of the art wireless technology.
1.2 Application Device
Scope
Qisda H18T module is a high speed modem card with PCI Express minicard form factor
and is focusing on the E-Book, Wireless Router and other portable device marketing.
¾
E-Book
¾
Wireless Router
2. FEATURES
2.1 General Characteristics
Bands:
Tri Band WCDMA and Quad Band GSM
Band
TX
RX
GSM850
824~849 MHz
869~894MHz
EGSM900
880~915 MHz
925~960MHz
DCS1800
1710~1785MHz
1805~1880MHz
PCS1900
1850~1910MHz
1930~1990MHz
WCDMA850
824~849 MHz
869~894MHz
WCDMA1900
1850~1910MHz
1930~1990MHz
WCDMA2100
1920~1980MHz
2110~2170MHz
Support SIM Interface: 1.8V/3V
Form factor
i.
Dimension: 50.95 x 30 x 3.6 mm
ii.
Weight: 10g
Power
Operation Voltage: 3.3V ~ 3.6V
Power Consumption:
Data Mode:
Band
Typ
Max
Unit
GSM850 / PCL=5
360
390
mA
EGSM900 / PCL=5
360
390
mA
DCS / PCL=0
310
340
mA
PCS / PCL=0
310
340
mA
WCDMA (all band)
750
820
mA
EDGE & GPRS Multislot:
GMSK
8PSK
Band
Slot 1
Slot 2
Slot 3
Slot 4
Slot 1
Slot 2
Slot 3
Slot 4
GSM850
< 380mA
<635mA
< 755mA
< 775mA
< 280mA
< 310mA
< 425mA
< 505mA
GSM900
< 380mA
< 635mA
< 755mA
< 775mA
<280mA
<310mA
< 425mA
< 505mA
DCS1800
< 330mA
< 525mA
< 610mA
< 640mA
< 200mA
< 305mA
< 340mA
< 375mA
PCS1900
<330mA
< 525mA
< 610mA
< 640mA
< 200mA
< 305mA
< 340mA
< 375mA
Sleeping Mode:
Typ (Average)
Max (Average)
Unit
GSM / MFRM=2
mA
GSM / MFRM =9
4.5
mA
DCS / MFRM =2
mA
DCS / MFRM =9
3.4
mA
PCS / MFRM =2
mA
PCS / Page frame=9
3.1
4.5
mA
WCDMA / DRX=6 (0.64 S)
5.7
6.5
mA
WCDMA / DRX=9 (5.12 S)
3.2
4.5
mA
Shutdown current
10
50
uA
Hardware Interface:
52 Pins PCI Express Mini Card connector interface
1 RF Antenna Coaxial Connectors
Software Interface:
USB driver
HSPA Modem software tool
2.2 RF Functionalities
Maximum TX Power
The performance of the transmitter meets test requirement ETSI TS 151 010-1 chapter 13.3 for
GSM, chapter 13.17.3 for EDGE and TS 34.121 chapter 5.2&5.4.3 for WCDMA, chapter 5.2A for
HSDPA.
Band
Max
Min
GSM850
33 dBm ±2dBm
5 dBm ±5dBm
EGSM
33 dBm ±2dBm
5 dBm ±5dBm
DCS
30 dBm ±2dBm
0 dBm ±5dBm
PCS
30 dBm ±2dBm
0 dBm ±5dBm
GSM850(EDGE)
27 dBm ±3dBm
5 dBm ±5dBm
EGSM(EDGE)
27 dBm ±3dBm
5 dBm ±5dBm
DCS(EDGE)
26 dBm ±3dBm
2 dBm ±5dBm
PCS(EDGE)
26 dBm ±3dBm
2 dBm ±5dBm
UMTS-2100
24 dBm +1/-3dBm
Less than -50dBm
UMTS-1900
24 dBm +1/-3dBm
Less than -50dBm
UMTS-850
24 dBm +1/-3dBm
Less than -50dBm
1/15≦βo/βd≦12/15 (HS-DPCCH)
24 dBm +1/-3dBm
13/15≦βo/βd≦15/8 (HS-DPCCH)
23 dBm +2/-3dBm
15/7≦βo/βd≦15/0 (HS-DPCCH)
22 dBm +3/-3dBm
Parametric Performance
Tests carried out at -20ºC, 25ºC and 60ºC for voltage 3.3V and 3.6V. The Measured Peak Phase,
RMS Phase, frequency error, power level, and static sensitivity meets ETSI TS 151 010-1 chapter
13.1 for GSM and TS 34.121 chapter 5.13.1 for WCDMA, chapter 5.13.1A for HSDPA
Band (GSM)
Peak Phase Error
RMS Phase Error
GSM850
<20°
<5°
EGSM
<20°
<5°
DCS
<20°
<5°
PCS
<20°
<5°
Band (WCDMA)
Error Vector Magnitude
UMTS-2100(HS-DPCCH)
<17.5%
UMTS-1900(HS-DPCCH)
<17.5%
UMTS-850(HS-DPCCH)
<17.5%
Sensitivity
The performance of the receiver meets test requirement ETSI TS 151 010-1 chapter 14.2.1 for GSM,
chapter 14.18.1 for EDGE and TS 34.121 chapter 6.2 for WCDMA.
Band
Typical
ETSI
GSM850
-107 dBm
-104 dBm
EGSM
-107 dBm
-104 dBm
DCS
-107 dBm
-103 dBm
PCS
-107 dBm
-103 dBm
EDGE(GMSK modulation)
-107 dBm
-104 dBm
EDGE(8-PSK modulation)
-104 dBm
-102 dBm
UMTS-2100
-110 dBm
-106.7 dBm
UMTS-1900
-107.5 dBm
-104.7 dBm
UMTS-850
-109 dBm
-104.7 dBm
Radio Frequency
GSM850 (850 MHz)
Frequency Range
TX 824-849 MHz; RX 869-894 MHz
Channel Spacing
200 KHz
Number of Channels
124 Carriers x 8 (TDMA)
Modulation
GMSK / 8-PSK
Duplex Spacing
45 MHz
Frequency Stability
+/- 0.1 ppm (Uplink TX)
Power Output
33 dBm Class 4 (2 W peak) – 5 dBm
Output Impedance
50 Ohm
Spurious Emission
-36 dBm up to 1 GHz (< -30 dBm > 1 GHz)
EGSM (900 MHz)
Frequency Range
TX 880-915 MHz; RX 925-960 MHz
Channel Spacing
200 KHz
Number of Channels
124 Carriers x 8 (TDMA)
Modulation
GMSK / 8-PSK
Duplex Spacing
45 MHz
Frequency Stability
+/- 0.1 ppm (Uplink TX)
Power Output
33 dBm Class 4 (2 W peak) – 5 dBm
Output Impedance
50 Ohm
Spurious Emission
-36 dBm up to 1 GHz (< -30 dBm > 1 GHz)
DCS (1800 MHz)
Frequency Range
TX 1710-1785 MHz; RX 1805-1880 MHz
Channel Spacing
200 KHz
Number of Channels
374 Carriers x 8 (TDMA)
Modulation
GMSK / 8-PSK
Duplex Spacing
95 MHz
Frequency Stability
+/- 0.1 ppm (Uplink TX)
Power Output
30 dBm Class 1 (1 W peak) – 0 dBm
Output Impedance
50 Ohm
Spurious Emission
-36 dBm up to 1 GHz (< -30 dBm > 1 GHz)
Compatible with phase 2 feature
PCS (1900 MHz)
Frequency Range
TX: 1850~1910MHz; RX: 1930~1990MHz
Channel Spacing
200KHz
Number of Channels
299 Carriers x 8 (TDMA)
Modulation
GMSK / 8-PSK
Duplex Spacing
80 MHz
Frequency Stability
+/- 0.1 ppm (Uplink TX)
Power Output
30 dBm Class 1 (1 W peak) – 0 dBm
Output Impedance
50 Ohm
Spurious Emission
-36 dBm up to 1 GHz (< -30 dBm > 1 GHz)
Compatible with phase 2 feature
WCDMA_BC 1 (2100 MHz)
Frequency Range
TX: 1920~1980MHz; RX: 2110~2170MHz
Channel Raster
200KHz
Number of Channels
299 Carriers x 8 (TDMA)
Modulation
QPSK
Duplex Spacing
190 MHz
Frequency Stability
+/- 0.1 ppm (Uplink TX)
Power Output
24 dBm +1/-3dBm - less than -50dBm
Output Impedance
50 Ohm
Spurious Emission
-60dBm(860-895MHz);-60dBm(921-925MHz);-67dBm(925-935MHz);
-79dBm(935-960MHz);
-67dBm(1475.9-1500.9MHz);-71dBm(1805-1880MHz);
-60dBm(1844.9-1879.9MHz);-41dBm(1884.5-1919.6MHz);
-60dBm(2110-2170MHz); -60dBm(2620-2690MHz);
WCDMA_BC 2 (1900 MHz)
Frequency Range
TX: 1850~1910MHz; RX: 1930~1990MHz
Channel Raster
200KHz
Number of Channels
299 Carriers x 8 (TDMA)
Modulation
QPSK
Duplex Spacing
80 MHz
Frequency Stability
+/- 0.1 ppm (Uplink TX)
Power Output
24 dBm +1/-3dBm - less than -50dBm
Output Impedance
50 Ohm
Spurious Emission
-60dBm(869-894MHz;1930-1990MHz;2110-2155MHz)
WCDMA_BC 5 (850 MHz)
Frequency Range
TX 824-849 MHz; RX 869-894 MHz
Channel Raster
200KHz
Number of Channels
299 Carriers x 8 (TDMA)
Modulation
QPSK
Duplex Spacing
45 MHz
Frequency Stability
+/- 0.1 ppm (Uplink TX)
Power Output
24 dBm +1/-3dBm - less than -50dBm
Output Impedance
50 Ohm
Spurious Emission
-60dBm(869-894MHz;1930-1990MHz;2110-2155MHz)
3. HARDWARE DESCRIPTION
3.1 System Interface
The I/O connectors of H18T module are PCI EXPRESS MINI CARD and two RF antenna connectors.
Table 3-1 summarizes the signals and power lines that are supported by the PCI Express Mini
Card System Interface. Table 3-2 shows the antenna interface.
Table 3-1 System Interface
Signal Group
Pin counts.
Description
Power
3.3V power source
GND
13
Return current path
USB
USB serial data interface compliant to the USB 2.0 specification
W_DISABLE#
Enable/Disable the HSDPA module
UIM
SIM function
LED
Status indicator
Table 3-2 Antenna interface
Signal Group
ANT
Connector no.
Description
Antenna interface
3.2 Functional Diagram
3.3 Pin Assignment and Description
Pin
Signal name
Direction
Description
NC
Not connect
+3.3Vaux
NC
GND
NC
No connect
NC
No connect
NC
No connect
UIM_PWR
Output
Power source for the USIM
GND
Power
Return current path
10
UIM_DATA
11
NC
12
UIM_CLK
13
NC
14
UIM_RESET
Output
USIM reset signal
15
GND
Power
Return current path
16
NC
No connect
17
NC
No connect
18
GND
19
NC
Power
3.3V power source
Not connect
Power
Input / Output
Return current path
USIM data signal
No connect
Output
USIM clock signal
No connect
Power
Return current path
No connect
Active low signal.
20
W_DISABLE#
Input
This signal is used by the system to shutdown
the HSDPA module.
21
GND
Power
22
NC
No connect
23
NC
No connect
24
+3.3Vaux
25
NC
26
GND
Power
Return current path
27
GND
Power
Return current path
28
NC
29
GND
30
NC
No connect
31
NC
No connect
Power
Return current path
3.3V power source
No connect
No connect
Power
Return current path
32
NC
No connect
33
NC
No connect
34
GND
Power
Return current path
35
GND
Power
Return current path
36
USB_D-
37
GND
38
USB_D+
39
+3.3Vaux
Power
3.3V power source
40
GND
Power
Return current path
41
+3.3Vaux
Power
3.3V power source
42
LED_WWAN#
Output
43
GND
Power
44
NC
No connect
45
NC
No connect
46
NC
No connect
47
NC
No connect
48
NC
No connect
49
NC
No connect
50
GND
51
NC
52
+3.3Vaux
Input / Output
Power
Input / Output
Power
USB serial data interface (negative)
Return current path
USB serial data interface (postive)
Active low signal.
WAN status LED driver.
Return current path
Return current path
No connect
Power
3.3V power source
3.4 Terminal Definition
Recommend antenna connect
Hirose Coaxial Connectors
System connector
The Qisda H18T PCIE Express interface compatibility Mini Card Electromechanical Specification
Revision 1.1.
3.5 Electrical Characteristics
DC characteristics
Power Supply:
Symbol
Parameter
Min
Typ
Max
Unit
+3.3Vaux
Power Supply Voltage
3.2
3.3
3.6
Isys(peak)
System Max Current Consumption
2.0
2.2
Isys(avg.)
System Max Current Consumption
0.8
1.0
※ The module draws under more than 2.2A peak current while transmitting. Use wide
traces for power supply line and compliant with the PCB layout rule.
The current rating of component related with the power supply line must be
taken into consideration
※ Definitions:
Peak current – The highest averaged current value over any 100-microsecond period
Normal current – The highest averaged current value over any 1-second period
Control Interface:
˙W_DISABLE# :
Symbol
Parameter
Min
VIH
High Level Input Voltage
0.7Vcc
VIL
Low Level Input Voltage
tpwron
Power-on sequence interval
High Level: Device Power on
Max
Unit
0.3Vcc
1.5
sec
Low Level: Device Power off
※ W_DISABLE# must stay high at least tpwron to power on the Device.
USB Transceiver DC characteristics
The USB interface is powered from 3.3V power source.
Parameter
Symbol
Min
VIH
2.0
Max
Unit
Input Levels for Low/Full Speed
High
Low
VIL
0.8
Differential Input Sensitivity
VDI
0.2
VHSSQ
100
150
mV
VHSDSC
100
150
mV
Low
VOL
0.0
0.3
High
VOH
2.85
3.3
High Speed Idle Level
VHSOI
-10.0
10.0
mV
High Speed Data Signaling High
VHSOH
360
440
mV
High Speed Data Signaling Low
VHSOL
-10.0
10.0
mV
Input Levels for High Speed
High Speed Squelch Detection Threshold
High Speed Disconnection Detection
Threshold
Output Levels for Low/Full Speed
Output Levels for High Speed
USIM Interface
The USIM signals are defined on system connector to provide the interface between the
removable User Identity Module. USIM interface usually run off either 1.8V or 3.0V.
Pin
Name
Direction
Description
UIM_PWR
Output
Power source for the USIM
10
UIM_DATA
Input / Output
USIM data signal
12
UIM_CLK
Output
USIM clock signal
14
UIM_RESET
Output
USIM reset signal
Parameter
Symbol
Min
Max
Unit
Logic High Input Voltage
VIH
0.65‧VSIM
VSIM +0.3
Logic Low Input Voltage
VIL
-0.3
0.35‧VSIM
Input High Leakage Current
IIH
uA
Input Low Leakage Current
IIL
-1
uA
Logic High Output Voltage
VOH
VSIM-0.45
VSIM
Logic Low Output Voltage
VOL
0.45
High-Level, Three-State Leakage
IOZH
uA
-1
uA
Current
Low-Level, Three-State Leakage Current
Type I (8 Pins UIM socket)
IOZL
Type II (6 Pins UIM socket)
Current Driver Interface:
Parameter
Min
LED_WWAN
10
Typ
Max
Unit
mA
LED Application Circuit:
※ Recommend to reserve “Resistor” and “Capacitor” for improve RF wireless
performance.
3.6 Environmental
Operational temperature: -20 ~ +60 ℃
Functional temperature: -20 ~ +70 ℃
Storage temperature: -40 ~ +85 ℃
Note:
The maximum case temperature (Tc) of shielding case cover should be under 90 ℃ (@RF TX
power = 24dBm) for ensure all of the characteristics of H18T module can be fulfilled the ETSI
specification.
3.7 Physical Package
Top View
Bottom View
Side View
H18 Module
0.8mm Max
1.8±0.1mm
PCB thickness : 1.0mm
±0.1mm
Total thickness :
3.6mm ± 0.15 mm
PCI EXPRESS MINI CARD SPEC.
4. SOFTWARE CHARACTERISTICS
4.1 Introduction
H18T uses the cutting edge technique of Qualcomm 3.5G (HSDPA) wireless communication. It
is a wireless data card product embedded in any host device which has mini-PCI Express
interface. The software platform is Qualcomm QSC6270. It uses USB interfaces to
communicate with PC/NB. The USB interfaces are composed of three parts “NDIS interface”,
“Customized AT command Interface” and “GPS command Interface”. “Network app” use
NDIS interface to transmit Internet data between H18T device and Host device. Dashboard
(“SMS, phone book, query network mode, and network status”) can send the AT commands
to drive H18T device by “AT command Serial COM port”, and H18T provides dual com port.
Factory test app also uses AT command interface to test H18T functionality in the factory.
4.2 Software Architecture
The H18T product high-level software architecture is represented in the following figure:
(High Level Software Architecture)
4.3 Supported OS
a. Windows XP/Vista/7 32bit and 64bit
b. MAC OS 10.4/10.5/10.6
c. Linux 2.6.x
d. WIN CE 5.0
Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.
15.105(b) for Class B Device (usual)
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
15.19(a)(1) licensed project
This device complies with part 15 of the FCC Rules. Operation is subject to the
condition that this device does not cause harmful interference.
End Product Labeling:
The final end product must be labeled in a visible area with the following: “Contains
FCC ID: VRSH18T”.
Manual Information That Must be Included:
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove. This RF module in the user’s manual of the end
product which integrates this module. The user’s manual for OEM Integrators must
include the following information in a prominent location
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body. This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 25
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:62424343-392f-4f56-9cdd-d810a43a2918
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:04:13 16:38:37+08:00
Create Date                     : 2010:04:13 16:38:37+08:00
Document ID                     : uuid:a58d913c-fef7-4617-9b76-1738927a96a2
Format                          : application/pdf
Title                           : Microsoft Word - H18T_user manual_2010_04_06.doc
Creator                         : Vinci.Chen
Author                          : Vinci.Chen

EXIF Metadata provided by EXIF.tools