Qiyue Optronics QLM17XXXXXX 17” LCD Monitor User Manual

Shenzhen Qiyue Optronics Company Limited 17” LCD Monitor

User Manual

Color TFT LCD MonitorUser's ManualImportant Notice: Please read this manual carefully.
PrecautionFCC NoticeNote: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipmentThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Read all of these instructions and save this manual for later use. Follow all warnings and instructions on the product.1. Do not cover or block the ventilation holes in the case.2. Do not insert sharp objects or spill liquid into the LCD monitor through the cabinet slots; this may cause accidental fire, electric shock or failure.3. Unplug the unit when not in use for an extended period of time.4. Do not attempt to service this product yourself, as opening or removing the cover may expose you to potential electric shock. Only a qualified technician should service this product.5. Do not touch the screen directly with your fingers as it may damage the screen; the oil from your skin is difficult to remove.6. Do not apply pressure to the screen, the LCD is very delicate.7. Keep the monitor away from extreme heat, cold or humid places.8. Do not place directly under sunlight, dusty surroundings or near equipment, which may generate strong magnetic fields.CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK)NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.1
IntroductionProduct DescriptionPackage ContentsTFT LCD MonitorVGA cablePower cordDVI cableAudio cableUser's ManualPlease check the TFT-LCD Monitor Package to make sure it contains the following tiems:Thank you for choosing the Flat Panel TFT-LCD Color Monitor. It combines the features of a MONITOR with a THIN FILM TRANSISTOR Liquid crystal display (TFT-LCD). This new generation of TFT-LCD incorporates a high quality display in a lightweight module.Unlike CRT displays, the LCD panel has a xed format over a set area. So. for best performance the "native resolution" setting is recommended.For 17" wide screen LCD monitors: The native resolution of LCD panel is 1440 x 900. Recommenden resolution is 1440 x 900@60Hz. Color TFT LCD MonitorUser's ManualImportant Notice: Please read this manual carefully.2
Menu Operating InstructionsDirect Access FeaturesYour LCD monitor allows you to easily adjust the characteristics of the image being displayed. All of these adjustments are made using the control buttons on the front bottom of the monitor. While you use these buttons to adjust the controls, the OSD (On Screen Display) shows you their numberic values as they change.Instructions of each button on the LCD monitor, please see Menu Control Buttons on the next page.1. Push "AUTO" to get the optimal image.2. With the OSD off, push the "MENU" button to display the main OSD menu.3. Use " +/- " buttons to select the function, and press the "MENU" button once to activate the selected function.4. After selecting a function, use the " +/- " buttons to make necessary addjustments. The setting bar moves and the numberic value indicator changes to reflect your adjustments.5. Select the "Exit" icon to return to the main menu to select another function or to exit from the OSD. The new settings will be automatically saved. You can also press "MENU" button repeatedly to go backward to upper-level menu or exit the OSD.6. When OSD is not active or visible on your screen: push " - " to decrease volume. push " + " to increase volume.7. You can choose input source in OSD menu (see OSD function instructions). 3
4Menu Control ButtonsAUTO : Automatically adjusts for an optimal image (when no OSD is used). Returns to upper level of OSD, or exits the main menu (when OSD is used).MENU: Displays the main menu, or selects command function.- : Decreases value. When OSD is not active or visible on the screen, push " - " to decrease volume. + : Increases value. When OSD is not active or visible on the screen, push " + " to increase volume. : Power on/off control.LED : Power On: Green. Power Saving or No Signal: Red. AUTO MENU-+LED
On Screen Display (OSD)Functions Instruction1. Color Menu It enables you to adjust image Color.Contrast To adjust image contrast.BrightnessTo adjust image brightness.Color TempTo set the Color temperature: 9300, 6500, User.After adjusting, choose Exit or press AUTO repeatedly to exit.Color AdjustTo enter Color Adjust submenu. You can adjust Color components Red, Green and Blue manually.OSDtherColorBrightnessContrast50 -9300 6500++50 -Color TempColor AdjustExitUserPictureFunctionOSD MenuMiscExitOSDtherColorGreenRed100 -100 -++100 - +BlueExitPictureFunctionOSD MenuMiscExit5
2. Picture Menu It enables you to adjust picture.H.PositionTo adjust horizontal position of picture.PhaseTo adjust the phase of picture.V.PositionTo adjust vertical position of picture.ClockTo adjust the clock of picture.SharpnessTo adjust the sharpness of picture: from level 1 to 5.After adjusting, choose Exit or press AUTO repeatedly to exit.OSDtherColor H.PositionV.Position50 - ++50 -+50 -+73 -PhaseClockSharpness 1 2 3 4 5ExitPictureFunctionOSD MenuMiscExit6
3. Function Menu It enables you to use Auto Adjust and Auto Color function.OSDtherColor Auto Adjust YES NOYES NOAuto ColorExitPictureFunctionOSD MenuMiscExitAuto AdjustTo do auto picture adjusting.Auto ColorTo do auto Color adjusting.After adjusting, choose Exit or press AUTO repeatedly to exit.7
After adjusting, choose Exit or press AUTO repeatedly to exit.4. OSD Menu It enables you to adjust OSD menu properties.LanguageSelect Language to enter language setting submenu (see below).OSDtherColor LanguageExitPictureFunctionOSD MenuMiscExitOSDtherColorFrancaisEnglish Italiano繁體中文Deutsch简体中文 日本语Espanol한국어 PortuguesPictureFunctionOSD MenuMiscExit~Use "+", "-" buttons to choose the language you need.8
InputTo select input source: VGA, DVI (see below).OSDtherColor VGADVIExitPictureFunctionOSD MenuMiscExitResetTo reset all the settings to factory default.VolumeTo adjust the volume.After adjusting, choose Exit or press AUTO repeatedly to exit.95. Misc Menu It enables you to choose input source, do reset, etc.OSDtherColorReset YES NOInput+50 -VolumeExitPictureFunctionOSD MenuMiscExit
Display ModesFor 17" Wide ModeTo set the display mode1. Set the resolution: Right dick on the Windows® desktop → choose Propeties → choose Settings → set the resolution.2. Set the refresh rate: See your graphic card's user guide for instructions.Mode Resolution Vertical Frequency(Refresh Rate)1 720 x 400 60Hz2 720 x 400 70Hz3 640 x 480 60Hz4 640 x 480 72Hz5 640 x 480 75Hz6 800 x 600 60Hz7 800 x 600 72Hz8 800 x 600 75Hz9 1024 x 768 60Hz10 1024 x 768 70Hz11 1024 x 768 72Hz12 1024 x 768 75Hz13 1280 x 1024 60Hz14 1280 x 1024 75Hz15 1280 x 768 60Hz16 1280 x 768 75Hz17 1440 x 900 60Hz18 1440 x 900 75Hz10
Connection to PC1. Please connect to the 100–240V AC socket.2. Please connect signal cable to the PC.11
SpecicationItem DescriptionDisplay Size 17" wideActive Area 367(H) x 229(V) mmMaximum Resolution 1440 x 900Pixel Pitch 0.255 mmAspect Ratio 16:10Display Colors 262,144Brightness (Typ.) 200cd/m2Contrast Ratio 600:1Response Time 16msView Angle 45+45(H)/20+45(V)Vertical Frequency 60Hz~75HzDisplay Mode VGA, SVGA, XGA, SXGA, WXGA+Signal Interface D-Sub (Analog), DVI-D (Digital)Power Consumption(Operation) <25WPower Consumption(Saving) <1WPower Supply 100-240 V AC, 50/60HzOSD Language Multi-languageSpeaker 2W x 2Operation Environment Temperature 0ć-50ć, Humidity 20%-80%Store Environment Temperature 20ć-60ć, Humidity 20%-80%Notice: Specications are to change without noticing the customer.12
CleaningTroubleshootingLCD pixel statement1. Gently wipe the screen with a clean, soft, lens brush or a soft clean, lint-free cloth. This removes dust and other particles that can scratch the screen.2. Do not apply pressure to the screen surface when wiping it clean.3. Do not pour or spray any liquid directly onto the screen or case of the LCD monitor. Chemical cleaners may damage the screen of LCD monitor.• There is no picture on the screen. A: Please check the color of the LED indicatior on the LCD monitor. 1. "GREEN": During normal operation the LED light will be green. If it is green and there is no picture, contact the customer service line. 2. "RED": Please check the connection of the VGA cable to the monitor and the connection to the computer. 3. "NO POWER": Make sure the power cord is securely connected to the socket.• Missing Colors A: If any of the red, green, or blue colors are missing, check the signal cable to make sure it is tightened correctly. the pins in the cable could be loose and cause a bad connection.• No Image A: 1. Make sure power button is ON. 2. Check whether the LCD monitor and computer power cords are connected and whether there is a supply of power.• No Signal Input A: Please check the signal connection between the computer and LCD monitor. The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misre or appear as black or colored dots. This has no effect on the recorded image and does not constitute a malfunction.Normally, a 17" WXGA+ (1440 x 900) display has nearly 4 million sub-pixels. There are 8 non-performing pixels on the LCD screen, which is only 0.0002@ of the total sub-pixels. This percentage is acceptable for any inspection specications.13
• Image too bright / too dark A: Adjust brightness and contrast by OSD.• Irregular Image A: 1. Check the signal connection between the computer and LCD monitor. 2. Perform Auto Adjust.• Distorted Image A: Reset the LCD monitor (Perform "Reset" function by OSD). • Image is not centered / Size is not appropriate. A: 1. Use OSD Picture Menu to adjust H.Position and V.Position. 2. Check image size setting. 3. Perform Auto Adjust.• No sound. A: 1. Check the audio signal cable connection between the computer and LCD monitor. 2. Check the volume setting.14

Navigation menu