Quanta Computer 1KU3 1KU3 User Manual 1KU product spec
Quanta Computer Inc 1KU3 1KU product spec
manual
___________________________________________________________ UANTA COMPUTER INC. ___________________________________________________________ 1KU3 Product Specification Nov. 28th, 2011 Revision: 2B Issued By: Suya Hou Checked By: Claire Huang ___________________________________________________________________________ The release of this document is under controlled by the company. Any extra copy of this document must be written permission by the project manager. ___________________________________________________________________________ - Quanta Confidential - UANTA COMPUTER INC. CNBU/1KU3 ________________________________________________________________________________________ Document History: Vision 2A 2B Release By Suya Hou Suya Hou Date 2011.11.25 2011.11.28 Note First release Add CE statement ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 2 - Quanta Confidential - UANTA COMPUTER INC. CNBU/1KU3 ________________________________________________________________________________________ CONTENT 1. INTRODUCTION ...................................................................................... 4 1.1 RADIO FREQUENCY CONFIGURATIONS ....................................................................................... 4 2. MAIN FEATURES ..................................................................................... 4 3. MECHANICAL SPECIFICATIONS................................................................ 7 4. PERFORMANCE....................................................................................... 7 4.1 RF SPECIFICATION ................................................................................................................. 7 4.2 ELECTRICAL SPECIFICATION ..................................................................................................... 8 4.2.1 Power Specification............................................................................................................................. 8 4.2.2 Pin Assignment.................................................................................................................................... 8 5. AT COMMAND.......................................................................................10 5.1 3GPP STANDARD AT COMMANDS......................................................................................... 10 6. FCC ........................................................................................................10 FCC ID: HFS1KU3 .................................................................................................................. 10 7. CE MARKING .........................................................................................10 ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 3 - Quanta Confidential - UANTA COMPUTER INC. CNBU/1KU3 ________________________________________________________________________________________ 1. Introduction 1KUx is a customized PCI Express Mini Card, which is developed on Qualcomm MDM9600/9200 platform and capable to provide various frequency configurations, support data operation on LTE, EVDO, HSUPA, HSDPA and WCDMA connectivity for portable and hand-held computers. 1.1 Radio Frequency Configurations The required radio frequency has been defined into 3 SKUs based on customer needs, 1KUx is a general definition of this embed module, precise name will be named as 1KU1, 1KU2 and 1KU3 in accordance with bands configuration. Due to limited space reserved for the module and Qualcomm’s chipset configuration, 3 SKUs have to be realized by leveraging 2 PCBs design. This PCI Express Mini Card is able to support UP TO Quad Bands in LTE/UMTS and Quad Bands in EDGE, GPRS, and GSM if required. Hence, the following SKU table will become as whole framework of product specification. Table 1-1 Quanta Model Name QCI P/N 1KU1 1KU2 1KU3 211KUMB0070 211KUMB0050 211KUMB0060 Description LTE & CDMA HSPA+ Only LTE & HSPA+ HSPA+ 850/900/1900/2100/AWS 850/1900/2100 LTE 700U AWS/700D EVDO 800/ 1900 MHz PCB Design PCB-1 PCB-2 PCB-2 2. Main Features The following features set can be referred to 1KU1, 1KU2 and 1KU3, bands supported frequency depend on each SKU bands configuration. Features Items Descriptions Dimension 35.18 x 30 x 4mm Weight 9g Operation Temperature -10°C to +55°C Storage Temperature -20°C to +80°C DC Power Supply Supply Voltage 3.4~4.2V Interface Edge connector Physical Outlook Temperature Range Host communication Remarks 52 pins 0.8 pitch 0.5A rating current Alternative: - USB 2.0 - 8 bit SDIO at 1.8V ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 4 - Quanta Confidential - UANTA COMPUTER INC. CNBU/1KU3 ________________________________________________________________________________________ SIM Connection (U)SIM 1.8V/3V Class B/Class C 2 Antenna W_FL connectors: - 1 Primary for WCDMA/HSPA/LTE/Cdma2000/EVDO - 1 auxiliary for HSPA/LTE/EVDO Rx diversity Communication ports at USB Baseband Processor Qualcomm MDM 9600/9200 600MHz - Application μP: ARM926-256MHz - SW/FW Processor: QDSP6 at up to 595 MHz PMIC PMIC 8028 Internal Memory 64 MB DDR SDRAM internal stacked memory 166 MHz maximum speed 32-bit data width support 1.8 V interface External Memory NAND Flash 1Gb 63-Ball FBGA (9 x 11 x 1.0 mm) Operating voltage: 1.8V Memory Density: 128M x 8 bit Radio UMTS Frequency B1: UMTS-2100 (1920-1980MHz; 2110-2170MHz) B2: UMTS-1900 (1850-1910MHz; 1930-1990MHz) B4: UMTS-AWS (1710-1755MHz; 2110-2155MHz) B8: UMTS-900 (880-915MHz; 925-960MHz) B5: UMTS-850 (824-849MHz; 869-894MHz) Details refer to SKUs EVDO Frequency BC0:EVDO-800 (824-849MHz; 869-894MHz) BC1:EVDO-1900(1850-1910MHz; 1930-1990MHz) Only request in SKU1 LTE Frequency B13-700U (777-787MHz; 746-756MHz) B17-700D (704-716MHz; 734-746MHz) B4-AWS (1710-1755MHz;2110-2155MHz) UNABLE to support all CPU Air Interface Features 1 Modem port 1 Diagnostic port 1 AT command port 1 NDIS interface RF System RTR8600 - UMTS/HSDPA/HSUPA 850/900/1900/2100/AWS Power class 3 (+24dBm) - LTE Power class 3 (+23 dBm) - CDMA/EVDO Power class 3(BC0/+23dBm) Power class 2(BC1/+23dBm) Rx Diversity Will differ according to each SKU: - EVDO 800/1900MHz - LTE 700U/700D/AWS - UMTS 850/900/1900/AWS/2100 UMTS Rel.99 table LTE bands in one SKU Division Duplex: FDD Peak PS data rate: 384 kbps UL/ 384 kbps DL ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 5 - Quanta Confidential - UANTA COMPUTER INC. CNBU/1KU3 ________________________________________________________________________________________ HSDPA Modulation: QPSK/ 16QAM Support Category 6/8; 7.2 Mbps/DL (Standalone); HSUPA Modulation: QPSK/ 16QAM Support Category 5/6 (2msec TTI)* Up to 5.76 Mbps/UL (Standalone) HSPA+ Rel 8 DL * Dual carrier with 64 QAM, for up to 42 Mb/s --Depends on support Qualcomm support 2 × 2 MIMO with 64 QAM, for up to 42 Mb/s plan support --Cat. 24 only support Rel7 DL *: in 1KU2. 64 QAM, for up to 21 Mb/s support 2 × 2 MIMO with 16 QAM, for up to 28 Mb/s support Data Service Up to 11.4Mbps/UL LTE Rel 8 100 Mbps DL/50 Mbps UL (Cat 3, 10MHz) 1.4 to 20 MHz RF bandwidth 2 × 2 downlink SU-MIMO CDMA 1xEV-DO Rev B 3.1Mbps DL/1.8 Mbps UL (Rev A) 14.7 Mbps DL/5.4 Mbps UL (Rev B)* Combines up to three carriers from within 10 MHz RF bandwidth Data Mode *Rev B have not supported in Qualcomm SW drop yet CSD Rate Up to 9.6, 14.4 and 64kbps DTE/DCE interface via USB 2.0 full speed 3GPP 27.007 AT Command Set 3GPP 27.005 Short Message ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 6 - Quanta Confidential - UANTA COMPUTER INC. CNBU/1KU3 ________________________________________________________________________________________ 3. Mechanical Specifications 4. Performance 4.1 RF Specification Condition: Voltage @3.4 V and Temperatures: 25゚C Rx Conductive Sensitivity Band UMTS-850, 12.2 kbps, 0.1% UMTS-900, 12.2 kbps, 0.1% UMTS-AWS, 12.2 kbps, 0.1% UMTS-1900, 12.2 kbps, 0.1% UMTS-2100, 12.2 kbps, 0.1% CDMA2000-BC0(800MHz),FER<0.5% CDMA2000-BC1(1900MHz),FER<0.5% LTE-700U,QPSK,5MHz,>95% LTE-700D, QPSK,5MHz,>95% 10 LTE-AWS, QPSK, 5MHz,>95% *: These will be adjusted further. Typ. Max Unit -109 -106* -108* -107 -109 -107 -107 -100 -100* -103* -104.7 -103.7 -106.7 -104.7 -106.7 -104 -104 -97 -97 -98 dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Typ Min 23 24 23 21 23 21 Unit dBm dBm dBm Tx Conductive Power Band UMTS850/900/1900/2100/AWS CDMA2000 LTE, Class3 ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 7 - Quanta Confidential - UANTA COMPUTER INC. CNBU/1KU3 ________________________________________________________________________________________ 4.2 Electrical Specification 4.2.1 Power Specification Name VCC_VBAT VCC_USIM/ 3.0V VCC_USIM/ 1.8V V_IH V_IL V_OH V_OL PERST_N Pin 2, 24, 39, 41, 52 1.8V Digital I/O 1.8V Digital I/O 1.8V Digital I/O 1.8V Digital I/O 22 Description VCC power USIM power output 3.0V USIM power output 1.8V input high voltage input low voltage output high voltage output low voltage Hardware Reset (PU) Min 3.4 2.7 1.62 1.62 1.62 -0.3 Typ 3.8 1.8 1.8 0.1 1.8 0.1 Max 4.2 3.3 1.98 1.98 0.45 1.98 0.45 0.6 Unit 4.2.2 Pin Assignment Pin Name Power Level POWER_ON_OFF 1.8V VCC_VBAT 4.2~3.4V VREG_MSME_1V8 1.8V GND MDM_JTAG_PS_HOLD WAKE_UP MDM_JTAG_RESET_N VREG_RUIM1 GND 10 UIM1_DATA 11 PA_state 12 UIM1_CLK 13 (1)MDM_RTCK or (2)TCXO_GPS_EN 14 UIM1_RESET 15 GND 16 UIM1_DET 17 (1)MDM_TCK or (2)TCXO_GPS 18 GND 19 MDM_TMS 20 Suspend 21 GND 22 PM28_RESET_N Description Modem power on/off Supply voltage for Modem Supply voltage for JTAG function GND JTAG Function 1.8V Wake-up Modem JTAG Function 1.8/3V SIM function GND SIM function 1.8V Indicate 3G/LTE/EVDO PA state for coexistence SIM function (1)JTAG Function or (2)Enable the output of TCXO(19.2MHz) so as to be used by GPS of main system *Depends on system how to design SIM function GND Detection of SIM insertion/plug-out (1)JTAG Function or (2)TCXO(19.2MHz) output for GPS of main system *Depends on system how to design GND JTAG Function 1.8V Trigger Modem to enter into sleep mode GND Reset Modem ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 8 - Quanta Confidential - UANTA COMPUTER INC. CNBU/1KU3 ________________________________________________________________________________________ 23 MDM_TDI JTAG Function 24 VCC_VBAT Supply voltage of Modem 25 MDM_TDO JTAG Function 26 GND GND 27 GND GND 28 SDC2_MDM_CLK 29 GND 30 SDC2_MDM_CMD 31 MDM_TRST_N 32 SDC2_MDM_D0 33 VBUS Supply voltage of USB(for R&D USB debug port) 34 GND GND 35 GND GND 36 USB_D- 37 GND 38 USB_D+ 39 VCC_VBAT 40 GND 41 VCC_VBAT 42 (WWAN_LED) 43 GND 44 SDC2_MDM_D1 1.8V SDIO I/O interface 45 SDC2_MDM_D4 1.8V SDIO I/O interface 46 SDC2_MDM_D2 1.8V SDIO I/O interface 47 SDC2_MDM_D5 1.8V SDIO I/O interface 48 SDC2_MDM_D3 1.8V SDIO I/O interface 49 SDC2_MDM_D6 1.8V SDIO I/O interface 50 GND 51 SDC2_MDM_D7 52 VCC_VBAT SDIO CLK GND SDIO CMD JTAG Function 1.8V SDIO I/O interface USB_DGND USB_D+ Supply voltage of Modem GND Supply voltage of Modem Indicate WWAN state for controlling LED of main system GND GND 1.8V SDIO I/O interface Supply voltage of Modem ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 9 - Quanta Confidential - UANTA COMPUTER INC. CNBU/1KU3 ________________________________________________________________________________________ 5. AT Command 5.1 3GPP Standard AT Commands 1. AT command set for GSM Mobile Equipment (ME) can be downloaded from http://www.3gpp.org/ftp/Specs/html-info/0707.htm . 2. AT command set for User Equipment (UE) can be downloaded from http://www.3gpp.org/ftp/Specs/html-info/27007.htm . 6. FCC FCC ID: HFS1KU3 This module is complied to FCC requirement, all integrators have to be aware of the following information. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation of the device. Only those antennas with same type and lesser gain filed under this FCC ID number can be used with this device. The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter. Required end product labeling: Any device incorporating this module must include an external, visible, permanent marking or label which states “Contains FCC ID: HFS1KU3 7. CE Marking This device has been tested to and conforms to the regulatory requirements of the European Union and has attained CE Marking. The CE Mark is a conformity marking consisting of the letters “CE”. The CE Mark applies to products regulated by certain European health, safety and environmental protection legislation. The CE Mark is obligatory for products it applies to: the manufacturer affixes the marking in order to be allowed to sell his product in the European market. This product conforms to the essential requirements of the R&TTE directive 1999/5/EC in order to attain CE Marking. A notified body has determined that this device has properly demonstrated that the requirements of the directive have been met and has issued a favorable certificate of expert opinion. As such the device will bear the notified body number 0560 after the CE mark The CE Marking is not a quality mark. Foremost, it refers to the safety rather than to the quality of a product. Secondly, CE Marking is mandatory for the product it applies to, whereas most quality markings are voluntary. Marking: The product shall bear the CE mark, the notified body number(s) as depicted to the right. CE 0560. ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 10 - Quanta Confidential -
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 10 Language : zh-TW Tagged PDF : Yes Title : 1KU product spec Author : Suya Creator : Microsoft® Office Word 2007 Create Date : 2011:11:28 21:15:52 Modify Date : 2011:11:28 21:15:52 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools