Quanta Computer B82 Tablet PC User Manual 07 B82 user menu English Regulation 20140625
Quanta Computer Inc Tablet PC 07 B82 user menu English Regulation 20140625
User Manual.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2317446 |
| Application ID | Si6cO/p2UPUVagGC7XyOUg== |
| Document Description | User Manual.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 10.49kB (131172 bits) |
| Date Submitted | 2014-07-07 00:00:00 |
| Date Available | 2015-01-03 00:00:00 |
| Creation Date | 2014-06-27 14:04:17 |
| Producing Software | GPL Ghostscript 8.63 |
| Document Lastmod | 2014-07-03 17:28:13 |
| Document Title | 07 B82 user menu-English_Regulation-20140625 |
| Document Creator | PDFCreator Version 0.9.7 |
| Document Author: | 06102142 |
B82 User Manual Device layout figure MICRO USB connector 2M CAMERA LIGHT SENSOR Touch screen 5M CAMERA Headset plug VOLUME BUTTON SIM card socket (3G only) DOCKING connector Micro SD socket DC JACK SD DOOR POWER BUTTON HOME BUTTON SPEAKER Buttons Buttons Power Button Function • Press and hold to turn the device on or off. • Press and hold for 8-10 seconds to reset the device if it has fatal errors or hang-ups, hang or freezes. Home • Press to return to the Home screen. • Press and hold to open the list of recent applications. Volume • Press to adjust the device volume. Socket and Other Device Name Function Docking connector For the connection with docking station; USB/ headphone/ UART interface included Charger Jack Connect to power adapter for battery charging USB connector Headset jack SIM card socket SD card socket Speaker Light sensor 2M/5M Camera Connect to USB devices, such as USB memory module, USB KB, USB mouse, etc. Connect to audio headset Only for 3G configuration unit; inserting the uSIM card to enable 3G communication function Support the Micro SD memory card (maximum capacities: 64 GB) Internal speaker in Light sensor, LCD brightness automatically Built-in adjusted according to the environment lightness Built-in front 2M Camera, Built-in Built rear 5M Camera Charging the battery • Use the charger to charge the battery before using it for the first time. time • This device doesn’t design the charging via USB socket. Please use only device-provided provided chargers to charge battery. Unapproved chargers or cables can cause the battery to explode or damage the device. Inserting a memory card Device accepts memory cards with maximum capacities of 64 GB. GB 1. Insert a memory card with the gold-coloured gold contacts facing downwards. 2. Push the memory card into the slot until it locks in place. Using the touch screen • Only fingers applicable to the touch screen. screen To avoid the touch screen damage, do not tap it with anything sharp or apply excessive pressure to it with your fingertips. • Tapping: To select a menu item or open an application by pressing an onscreen button, or to enter a character by using the on-screen keyboard, tap it with a finger. • Dragging: To move an icon, thumbnail, or preview to a new location, tap and hold it and drag it to the target position. position • Double-tapping: Double-tap tap on a webpage, map, or image to zoom in a part. Double-tap again to return. • Flicking: Flick left or right on the Home screen or the Applications screen to see another panel. Flick up or down to scroll through a webpage or a list. • Pinching: Spread two fingers apart on a webpage, map, or image to zoom in a part. Pinch to zoom out. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located located or operating in conjunction with any other antenna or transmitter. Continued FOR PORTABLE DEVICE USAGE (<20cm from body/SAR needed) Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES) DEVICES Note: The country code selection is for non-US US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. System specification System specification Voltage/ Current: Voltage 5V, Maximum current 2A AC Adapter Input voltage range / Frequency： ：100 ~ 240 V AC, 50/60 Hz DC Output：5V, 2A Trade name / Model : APD / WB-10E05FU 10E05FU-DAAA Battery Built-in Lithium-ion Polymer rechargeable battery Capacity: 4800 mAh
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : GPL Ghostscript 8.63 Keywords : Modify Date : 2014:07:03 17:28:13+08:00 Create Date : 2014:06:27 14:04:17+08:00 Creator Tool : PDFCreator Version 0.9.7 Metadata Date : 2014:07:03 17:28:13+08:00 Document ID : 6de6c95a-001c-11e4-0000-c3770e077d6a Instance ID : uuid:a8e8cc5b-85f3-48cb-8733-6dc12395ada9 Format : application/pdf Title : 07 B82 user menu-English_Regulation-20140625 Creator : 06102142 Description : Page Count : 10 Subject : Author : 06102142EXIF Metadata provided by EXIF.tools