Quanta Computer C300 Clover Mini WiFi User Manual
Quanta Computer Inc Clover Mini WiFi
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2561250 |
| Application ID | 8ufjqxRJI5mHj6UcbbyW6Q== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 21.27kB (265848 bits) |
| Date Submitted | 2015-03-20 00:00:00 |
| Date Available | 2015-09-16 00:00:00 |
| Creation Date | 2017-10-11 09:01:15 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-11 09:01:15 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 2014 (Macintosh) |
Clover Mini Feature Guide v2 English Deutsch Español Français Italiano Nederlands Polski This guide describes We are continuously Clover Mini’s hardware improving our software. and software features. To see the latest version of this guide, visit clover.com/setup. In Europe, visit eu.clover.com/setup 1 Clover Mini Feature Guide English 2 What’s included Clover Mini About Clover Mini Hub Power adapter (US) Power adapter (EU) Receipt paper x2 Screwdriver Ethernet SIM adapters (only for 3G) 3 Clover Mini Feature Guide Clover Mini is a powerful, lexible, easy-to-use payment terminal. It can be used as a cash register and more. On your countertop, Clover Mini securely accepts chip-and-pin and chip-and-signature EMVcards, enables credit and debit card transactions via swipe (MSR), insert (EMV Chip), or tap (EMV Contactless). USB English 4 Get to know Clover Mini Clover Mini Front SIM card slot REVERSE SO AUDIO AND MIC EASIER Hub Insert payment Swipe payment Contactless payment reader Charging port Type B USB port Ethernet (optional) Type A USB ports Cash drawer (optional) Microphone Audio jack Speaker Back Front facing camera Switching Hub connector’s direction: Turn Clover Mini over to access underside Use provided screwdriver to loosen green screws Switch connector to desired direction Tighten green screws (be sure to not overtighten) Reset button Paper roll release pull tab Receipt door Green screws on Hub connector must always be tightened to ensure reliable connection. For more pairing options visit clover.com/setup. 5 Clover Mini Feature Guide English 6 Set up your Clover Mini Payment Methods (Only for 3G) Open SIM card tray by loosening green screw with provided screwdriver. Pick the SIM card tray size that matches with your SIM card. Place card on tray and secure SIM door by tightening green screw. Plug all accessories into Hub. Provided ethernet and USB cords are optional. Plug power adapter cable into Hub charger port Plug power brick into power source. Device will automatically power on. Chip Card 1234 5678 9012 3456 1234 5678 9012 3456 34 5678 9012 3456 Video set up: clover.com/setup Europe: eu.clover.com/setup Insert Card Tap Card 1234 5678 9012 3456 Back Magnetic Stripe Card 1234 5678 9012 3456 Swipe Card 1234 5678 9012 3456 1234 5678 9012 3456 For more secure surface mounting instructions: ------- link link ---7 Clover Mini Feature Guide English 8 Applications Taking Payments Sale Enter an amount and take a payment--it’s that simple. Bar Tabs Open tabs with a credit card, view open tabs, and close them at the end of the night. Auth Only Auth a credit card, view open auths, and close them for a inal amount. Setup Wizard Let’s Get Started This is your guide for setting up Clover Mobile. Your activation code is in your welcome email. Home Use your Clover Home screen for quick access to all your Clover apps. Employees can also log in and out from here. Back of Store Closeout Review your sales by transaction type, card type, and server. Close open tips and tabs and perform closeouts at the end of the day for your device. Tips Enter tips from paper receipts quickly and easily. Transactions Your transaction history. Review recent transactions, perform refunds, and reprint receipts. 9 Clover Mini Feature Guide App Market Custom Business Solutions Browse and install apps to it your store’s every need. English 10 Useful Resources Web Access Manage Your Apps Some apps allow you to access them via your web browser. We’ve put shortcuts to these web pages at clover.com/home. Please use Chrome, Safari, or Firefox. In Europe, visit eu.clover.com/home Need Help? Visit help.clover.com, use the Help app, or call us anytime at the phone number given in your welcome email. PCI PTS security guidelines are available in our Help app. 11 Clover Mini Feature Guide English 12 FCC Part 15 Industry Canada Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B) FCC Part 15 Class B-speciic Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. • The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; • The maximum antenna gain permitted for devices in the bands 5250–5350 MHz and 5470–5725 MHz shall comply with the e.i.r.p. limit; and • The maximum antenna gain permitted for devices in the band 5725–5825 FCC Warning Changes or modiications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. FCC exposure limit compliance statement (SAR statement) This equipment complies with radio frequency (RF) exposure limits adopted by the Federal Communications Commission for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. 13 Clover Mini Feature Guide MHz shall comply with the e.i.r.p. limits speciied for point-to-point and non point-to-point operation as appropriate. In addition, high-power radars are allocated as primary users (i.e. priority users) of the bands 5250–5350 MHz and 5650–5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. English 14 CE RF Exposure Compliance This device meets the EU requirements (1999/519/EC) and the International Commission on Non-Ionizing Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic ields by way of health protection. This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. 15 Clover Mini Feature Guide v.4 draft 1 English 16 Clover Mini Wi-Fi Clover Mini 3G Model: C300 Model: C301 FCC ID: HFS-C300 FCC ID: HFS-C301 FCC information is available on the device under Settings > About Mobile > FCC information. EU Importer OmniPay Ltd Unit 9, Richview Oice Park, Clonskeagh, Dublin 14, Ireland Waste Electrical and Electronic Equipment-WEEE NOTE: This product is covered electronic equipment under the European Union’s Waste from Electrical and Electronic Equipment (“WEEE”) Directive(2012/19/EU). The WEEE Directive requires that covered equipment be collected and managed separately from typical household waste in all EU member states. Please follow the guidance of your local environmental authority or ask the shop where you purchased the product for collection or recycling options.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Create Date : 2015:01:09 11:05:43-08:00 Metadata Date : 2015:03:18 20:25:33+08:00 Modify Date : 2015:03:18 20:25:33+08:00 Creator Tool : Adobe InDesign CC 2014 (Macintosh) Instance ID : uuid:05837d0b-9758-43a9-980d-07f89376e05b Original Document ID : xmp.did:F77F117407206811822AB35FF8208EB3 Document ID : xmp.id:edefb239-7c1b-49ff-b7d2-1fc4725c1bd6 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:148b8a7d-bb74-4995-a6c4-e716fc83550a Derived From Document ID : xmp.did:f2e1c2ee-ad62-4577-90bb-8e5caea1893a Derived From Original Document ID: xmp.did:F77F117407206811822AB35FF8208EB3 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Macintosh) History Changed : / History When : 2015:01:09 11:05:43-08:00 Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 11 Creator : Adobe InDesign CC 2014 (Macintosh)EXIF Metadata provided by EXIF.tools