Quanta Computer FG2 TABLET PC User Manual Blade

Quanta Computer Inc TABLET PC Blade

USERS MANUAL 1

TOSHIBA AT200User Information GuideBlade.book  Page 1  Thursday, September 22, 2011  11:05 AM
Blade.book  Page 2  Thursday, September 22, 2011  11:05 AM
TOSHIBA AT200 User Information Guide 1Documentation■A comprehensive online user’s manual is preinstalled on your tablet. To access it, tap the Online Manual icon on the Apps menu.■Refer to the online user’s manual for detailed information and instructions concerning each item in this manual.■The online user’s manual installed on your tablet is the latest available at the production time. Please check http://www.toshiba.co.jp/worldwide/  for the most up to date online user’s manual.Safety IconsSafety icons are used in this manual to bring important information to your attention. Each type of icon and its implication are identified as shown below.Quick StartUnpack the box1. Remove the components and tablet from the box. Save the packing materials in case you need them later.2. Remove the documentation package for important information.Check the componentsYour tablet comes with:■AC adaptor (2-pin or 3-pin)■Power cable■Several documents, including the TOSHIBA Instruction Manual for Safety and Comfort. It may also ship with documentation for other software that may be pre-installed on your tablet. Some software may differ from its retail version (if available), and may not include user manuals or all program functionality.If any of the items are missing or damaged, contact your dealer immediately.Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions.Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment.Please read. A note is a hint or advice that helps you make best use of your equipment.All product specifications, configurations, prices, system/component/options availability are all subject to change without notice.Blade.book  Page 1  Thursday, September 22, 2011  11:05 AM
2 TOSHIBA AT200 User Information GuideConnecting the AC adaptor1. Plug the USB connector of the power cable into the USB port on the AC adaptor.2. Plug the power connector of the power cable into the docking interface on your tablet.3. Plug the AC adaptor into a live wall outlet.Turning on/off the powerPress and hold Power button to turn on the tablet. The tablet will vibrate to indicate the status.To turn off the tablet, press and hold Power button for approximately 2 seconds and select OK.Depending on the model, either a 2-pin or 3-pin AC adaptor will be bundled with the tablet.You can charge the tablet by connecting the power cable to a USB port on a computer. TOSHIBA recommends charging when the tablet goes into sleep mode.2-pin3-pinBlade.book  Page 2  Thursday, September 22, 2011  11:05 AM
TOSHIBA AT200 User Information Guide 3Quick TourThe following figure shows each important part of your tablet.* Provided with some models.Product appearance depends on the models you purchased.1. Display screen8. Micro USB port15. Speakers2. Web Camera (front)9. Micro HDMI port16. Docking interface3. Ambinet light sensor10. Memory media slot17. Wireless LAN, GPS, 3G* and Bluetooth antennas (not shown)4. Web Camera indicator11. Power button18. Camera flash5. Microphone12. Multi function LED indicator19. Camera (back)6. SIM card slot*13. Volume down/up button7. Headphone/Microphonecombo jack14. Multi function switch112134519181715 151667891012141317Blade.book  Page 3  Thursday, September 22, 2011  11:05 AM
4 TOSHIBA AT200 User Information GuideSwitching TOSHIBA AT200 on for the First TimeWhen starting to use the tablet for the first time, there are a few basic settings that will need to be configured before the tablet is ready for use as detailed below:1. Press and hold Power button on the tablet to turn on the power. During the initial start-up process you will be presented with the setup screen.2. Choose your preferred language and tap Start to continue.3. Connect to a wireless network via Wi-Fi. You can choose to skip and turn Wi-Fi on later in Settings screen. For details, please refer to the Connecting to Wi-Fi networks section in the online User’s Manual.4. Choose whether to use Google Location Service™ and tap Next to continue.5. Set date and time or use network-provided time and tap Next to continue.6. Register or sign in with a Google™ account.You can also skip this step by tapping Skip.7. Your tablet is now ready for use.Getting to Know the HOME ScreenThe HOME screen is your starting point for using all the installed applications on your tablet. You can customize the HOME screen to display the widgets, application shortcuts, wallpapers and other shortcuts you prefer.1. Apps menu5. Back2. Customize6. Home3. Widgets7. Recent apps4. Application shortcuts8. System bar51 2346 7 8Blade.book  Page 4  Thursday, September 22, 2011  11:05 AM
TOSHIBA AT200 User Information Guide 5Accessing the Online User’s ManualTo benefit most from the TOSHIBA AT200 Tablet, we recommend that you spend a short time referring to the online User’s Manual which can be displayed by the following steps:1. Tap Apps ( ) on the Home screen.2. Tap the Online Manual icon.Configuring Automatic Power Down ModeBy default the TOSHIBA AT200 Tablet is set to automatically switch itself off into sleep mode after 2 minutes. In the event that this period is not sufficient for your needs, it can be changed in the Settings screen. Please refer to the Screen settings section in the online User’s Manual. Press the Power button once to resume from sleep mode.After resuming from sleep mode, the screen remains locked. You can unlock the screen by the following steps:1. Press and hold the unlock icon ( ).2. Slide the icon towards the appearing circle.Item DescriptionApps menu See all your tablet’s apps.Customize Add widgets, apps, wallpapers, and more to your Home screen.Widgets Widgets show you the latest updates of applications. You can tap the widgets to open these applications.Application shortcuts Tap these icons on Home screen to open applications.Back Return to the previous screen.Home Return to the Home screen.Recent apps See recent applications.System bar Show app notifications, tablet status and quick settings.Blade.book  Page 5  Thursday, September 22, 2011  11:05 AM
6 TOSHIBA AT200 User Information GuideCharging the BatteryWhen the battery power becomes low you must recharge it to avoid losing any data.ProcedureTo recharge the battery, connect the AC adaptor to the tablet. The tablet will be powered up automatically and the multi function LED indicator (when set as Power/battery indicator) will glow white while the battery is being charged.Charging timeThe following table shows the approximate time required to fully charge a discharged battery when the AC adaptor is connected to the tablet.Charging timeBattery exhausted timeThe following table shows the approximate exhausted time of a fully charged battery.Battery exhausted timeBattery type TimeBattery (3 cell, 24.4Wh) about 6 hoursPlease be aware that the charging time when the tablet is on is affected by ambient temperature, the temperature of the tablet and how you are using the tablet - if you make heavy use of external devices for example, the battery might scarcely charge at all during operation.Battery type TimeBattery (3 cell, 24.4Wh) about 8 hours (in use)about 5 days (sleep mode)Please be aware that the battery exhausted time will be affected by how you are using the tablet.Blade.book  Page 6  Thursday, September 22, 2011  11:05 AM
TOSHIBA AT200 User Information Guide 7Copyright© 2011 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.First edition October 2011DisclaimerThis manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for your tablet at the time of this manual’s production. However, succeeding tablets and manuals are subject to change without notice. TOSHIBA assumes no liability for damages incurred directly or indirectly from errors, omissions or discrepancies between the tablet and the manual.TrademarksGoogle, Android and Google Apps are trademarks of Google Inc.Availability of Google applications, services, and features may vary by country, carrier, phone model, and manufacturer.Bluetooth is a trademark owned by its proprietor and used by TOSHIBA under license.Wi-Fi is a registered trademark of the Wi-Fi Alliance.HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.Other trademarks and registered trademarks not listed above may be used in this manual.CE ComplianceThis product is carrying the CE-Mark in compliance with the related European Directives. Responsible for CE-Marking is Toshiba Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany. The complete and official EU Declaration of Conformity can be found on TOSHIBA’s web sitehttp://epps.toshiba-teg.com on the Internet.Canadian Regulatory Information (Canada only)This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulation of the Canadian Department of Communications.Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment.This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.Cet appareil numérique de la class B respecte toutes les exgences du Règlement sur le matériel brouileur du Canada.Blade.book  Page 7  Thursday, September 22, 2011  11:05 AM
8 TOSHIBA AT200 User Information GuideDisposing of the Tablet and the Tablet's BatteryContact an authorized TOSHIBA service provider for details regarding how to dispose of the tablet and the battery.Information for Wireless DevicesWireless devices and your healthWireless products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless products however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.Because Wireless products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless products is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.In some situations or environments, the use of Wireless products may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:■Using the Wireless products equipment on board of airplanes, or■In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use the Wireless device prior to turning on the equipment.Canada - Industry Canada (IC)This tablet complies with RSS 210 of Industry Canada.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this tablet.The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications were met.Device authorizationThis device obtains the Technical Regulation Conformity Certification and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Telecommunications Business Law of Japan.■REGZA Tablet AT700Japan Approvals Institute for Telecommunications EquipmentApproval Number: 003WWA111201 003WWA111200 D111202003The following restrictions apply:■Do not disassemble or modify the device.■Do not install the embedded wireless module into other device.Blade.book  Page 8  Thursday, September 22, 2011  11:05 AM
TOSHIBA AT200 User Information Guide 9TOSHIBA SupportIf you require any additional help using your tablet or if you are having problems operating the tablet, you may need to contact TOSHIBA for additional technical assistance.Before you callSome problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first. Before contacting TOSHIBA, try the following:■Review troubleshooting sections in the documentation supplied with your software and/or peripheral devices.■If a problem occurs when you are running software applications, consult the software documentation for troubleshooting suggestions and consider calling the software company's technical support department for assistance.■Consult the reseller or dealer from where you purchased your tablet and/or software - they are your best resource for current information and support.TOSHIBA technical supportIf you are still unable to solve the problem and suspect that it is hardware related, visit TOSHIBA technical support website http://www.toshiba.co.jp/worldwide/.Blade.book  Page 9  Thursday, September 22, 2011  11:05 AM
*GMH300171B10*GMH300147010*GMH300171B10*Blade.book  Page 10  Thursday, September 22, 2011  11:05 AM

Navigation menu