Quanta Computer GS1SI2TK1 SATELLITE RADIO PnP RECEIVER User Manual SI2TK1 Installation User Guide 081707a indd

Quanta Computer Inc SATELLITE RADIO PnP RECEIVER SI2TK1 Installation User Guide 081707a indd

UserManual.wiki >

Quanta Computer >

GS1SI2TK1 User Manual

USERS MANUAL

InV2InV2Satellite RadioUser GuideUser Guide

Congratulations on the Purchase of your new SIRIUS InV2 Plug-n-Play RadioYour new SIRIUS InV2 Plug-n-Play Radio lets you enjoy SIRIUS® Satellite Radio’s digital entertainment in any vehicle.Use this manual to familiarize yourself with all of your InV2’s features and capabilities. For the latest information about this and other SIRIUS products and accessories, visit http://www.sirius.com.

[ Table of Contents ]4Table of ContentsTABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . 4WARNING AND SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . 6FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Canadian Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . 7General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9COPYRIGHTS & TRADEMARKS . . . . . . . . . . . . . . . . . . . . . 10PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . 11INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Attaching the Adhesive Dash Mount . . . . . . . . . . . . . . . . . . . . . 15Installing the Magnetic Antenna . . . . . . . . . . . . . . . . . . . . . . 16Docking Your SIRIUS Radio . . . . . . . . . . . . . . . . . . . . . . . . 32Connecting the Antenna . . . . . . . . . . . . . . . . . . . . . . . . . 33Connecting the Cigarette Lighter Adapter . . . . . . . . . . . . . . . . . . 33Connecting the SIRIUS InV2 to Your Vehicle’s Audio System . . . . . . . . . . 34Direct Wired Audio Connection . . . . . . . . . . . . . . . . . . . . . 34Direct FM Audio Connection . . . . . . . . . . . . . . . . . . . . . . 35Cassette Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Wireless Audio Connection . . . . . . . . . . . . . . . . . . . . . . . 37Wireless Audio Connection Using the FM Extender Antenna . . . . . . . . . 39Subscribing to the SIRIUS Service . . . . . . . . . . . . . . . . . . . . . 57CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58SIRIUS InV2 Front Panel and Connections . . . . . . . . . . . . . . . . . . 58OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Display Screen Information . . . . . . . . . . . . . . . . . . . . . . . . 60Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

[ Table of Contents ] 5Channel Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61FM Presets Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62MENU OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63SIRIUS ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64FM Transmit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Brightness and Contrast . . . . . . . . . . . . . . . . . . . . . . . . . 67Audio Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Channel Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Factory Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . 74SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76SIRIUS ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

[ Warning and Safety Information ]6Warning and Safety InformationFCC InformationThis device complies with part 15 of the FCC Rules. Operation is subject to the follow-ing two conditions:This device may not cause harmful interference, andThis device must accept any interference received, including interference that may cause undesired operation.1.2.Note: This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com-munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and the receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.1.2.3.4.

[ Warning and Safety Information ] 7WARNINGChanges or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.Canadian ComplianceThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.General PrecautionsLiquid Crystal PrecautionsIf the LCD screen on the radio is damaged, do not to touch the liquid crystal fluid. If any of the following situations happen, take the action indicated:If the liquid crystal fluid comes in contact with your skin, wipe the skin area with a cloth and then wash the skin thoroughly with soap and running water.If the liquid crystal fluid gets into your eye, flush the eye with clean water for at least 15 minutes. Seek medical care.If the liquid crystal fluid is ingested, flush your mouth thoroughly with water. Drink large quantities of water and induce vomiting. Seek medical care.Safety PrecautionsBe sure to observe the following warnings. Failure to follow these safety instructions and warnings may result in a serious accident.Do not operate your InV2 in a way that might divert your attention from driving safely. As a driver, you alone are responsible for safely operating your vehicle in accordance with traffic safety laws at all times.1.2.3.•

[ Warning and Safety Information ]8Do not install the unit where it may obstruct your view through the windshield, or of your vehicle’s indicator displays.Do not install the unit where it may hinder the function of safety devices such as an airbag. Doing so may prevent the airbag from functioning properly in the event of an accident.Be sure the unit is installed as described in the installation instructions which accompa-ny each accessory kit. SIRIUS Satellite Radio is not responsible for issues arising from installations which were not installed according to the instructions.To avoid short circuits, do not open the unit, and never put or leave any metallic objects (coins, tools, etc.) inside the unit.If the unit emits smoke or unusual odors, turn the power off immediately, and discon-nect the unit from any power source.Do not drop the unit or subject it to strong shocks.If the unit doesn’t seem to be working properly, turn the unit off, wait 10 seconds and then turn it on again.The installation and use suggestions contained in this manual are subject to any restrictions or limitations that may be imposed by applicable law. The purchaser should check applicable law for any restrictions or limitations before installing and/or operating this unit.Do not install the FM Extender Antenna where it will hinder or block your view. In some states it may be illegal to mount it on the windshield of your vehicle. Check applicable law for any restrictions or limitations before installing the FM Extender Antenna on your windshield.Do not install the FM Extender Antenna where it may hinder the function of safety devices such as an airbag. Doing so may prevent the airbag from functioning prop-erly in the event of an accident.••••••••••

[ Warning and Safety Information ] 9WarningsNotice To Drivers In California and MinnesotaState law prohibits drivers in California and Minnesota from using suction mounts on their windshields while operating motor vehicles. Other dashboard or friction mounting options should be used. SIRIUS does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice. (See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71) Operating TemperatureThe InV2 is designed to operate between -20° to +85° C (-4° to +185° F). Avoid leaving the radio in a vehicle or elsewhere where the temperature may fall outside this range. Extreme temperatures or extreme temperature fluctuations can degrade the performance of the LCD display screen, and possibly damage it.Cleaning and MaintenanceIf the radio or accessories become dirty, turn the power off and wipe it clean with a soft cloth. Do not use hard cloths, strong cleaning fluids, paint thinner, alcohol, or other volatile solvents to clean. These may cause damage to the radio.Cigarette Lighter AdapterThe Vehicle Dock cannot be powered directly from a vehicle’s 12VDC power system. It must be powered from the vehicle’s cigarette lighter or similar power port using the included Cigarette Lighter Adapter or an equivalent DC power adapter (see your local electronics dealer). Connecting the Vehicle Dock directly to the vehicle’s 12VDC power system may result in damage to the Vehicle Dock or SIRIUS radio, or both.

[ Package Contents ] 11Package ContentsThe following items are included with your purchase of the SIRIUS InV2 radio:SIRIUS InV2 RadioAdhesive Dash Mount Cigarette Lighter Adapter

[ Package Contents ]12Unpack your SIRIUS InV2 radio carefully and make sure that everything shown is present. If anything is missing or damaged, or if your the radio fails to operate, notify your dealer immediately. We recommend that you retain the original carton and packing materials in case you need to ship your radio in the future.Magnetic AntennaAntenna Cover/TailScrews Alcohol SwabFM Extender Antenna SuctionCups (2)Self Adhesive Cable Guides (3)

[ Installation ] 13InstallationSIRIUS suggests that you have your InV2 professionally-installed in your vehicle. Professional installation provides an experienced technician to install this product in your vehicle, advice for selecting a suitable mounting location for the Dash Mount, installation of the antenna, and proper routing of all the necessary wires and cables. If the locations of your SIRIUS radio and your vehicle’s FM antenna make the performance the SIRIUS radio’s built-in FM transmitter within your vehicle poor, a professional installer will have the necessary accessories to install an optional FM Direct Adapter or audio cable to connect your InV2’s audio output directly to your vehicle’s audio system. Ask your SIRIUS retailer if they provide professional installation services, or can recommend a professional installation service.

[ Installation ]14LocationWhen installing the Dash Mount in your vehicle, choose a location in your vehicle where it will not block your vision, interfere with the vehicle controls, or obstruct the air bag. The location should be easily accessible and provide good visibility of the display, and should not be located where it will be in direct sunlight which will affect the visibility of the display screen.Figure 1 shows two examples of the InV2 mounted on a vehi-cle’s dashboard. A is left of the steering wheel; B is right of the wheel.B.A.Figure 1

[ Installation ] 15Attaching the Adhesive Dash MountSelect the mounting position carefully before adhering the mount to your vehicle. Once the mount has been adhered to a surface, it will not be possible to remove it and adhere it again.Once you’ve selected a mounting location, clean the mounting surface area in the ve-hicle with the provided alcohol swab. Peel the protective material off the adhesive on the foot and press the foot firmly against the vehicle surface (see Figure 2).Allow the adhesive to adhere for a minimum of 2-4 hours before using the mount. The best adhesion occurs after 24 hours.1. Clean MountingArea with Swab 2. Peel Cover FromAdhesive Foot 3. Press Adhesive FootFirmly On Mounting AreaFigure 2

[ Installation ]16Installing the Magnetic AntennaCautionBecause adhesive is used in the installation of the Rubber Antenna Cover/Tail, we rec-ommend that you install the antenna at or above room temperature (68° F). The adhesive on the Rubber Cover/Tail may not adhere properly to the vehicle roof at temperatures lower than this. Warmer temperatures will also make it easier to route of the antenna cable through the rubber molding around the windows and in other areas in the vehicle. Maximum adhesion usually occurs within 72 hours at room temperature, so you should avoid car washes as well as other contact with the antenna and Rubber Cover/Tail dur-ing this 72 hour period.WarningBe sure not to cut, damage, or puncture the external jacket of the antenna cable during the installation procedure. Damage to the antenna cable can degrade the SIRIUS signal or make it unavailable, and can also cause water to intrude via the cable into the antenna causing the antenna to fail.Do not lengthen or shorten the antenna cable by cutting it. Doing so will cause the antenna to not function properly.InstallationInstalling the magnetic antenna consists of two steps:Mounting the magnetic antenna and Rubber Antenna Cover/Tail on the vehicleRouting the antenna cable through the vehicle to the Vehicle Dock••

[ Installation ] 17ANTENNA MOUNTINGThe SIRIUS Magnetic Mount Vehicle Antenna has a strong magnetic mount designed to hold it in place during normal driving conditions (highway/city). This also makes the antenna easy to remove for transferring it to other vehicles.Figure 3 shows the optimal mounting location for the antenna on several types of vehicles. These mounting positions should be observed when installing the antenna:Sedan/Coupe/SUV/Mini-Van: Install the antenna at the rear center of the roof, near the rear window.Pickup Truck: Install the antenna at the front center of the roof, near the wind-shield.Convertible: Install the antenna at the front center of the trunk lid, near the rear window.•••Sedan/Coupe Pickup Truck SUV/Mini-VanConvertibleFigure 3

[ Installation ]18The SIRIUS antenna needs to have an unobstructed area of 3 inches by 3 inches around it. It is important to mount the antenna where no obstructions will block the an-tenna from receiving the SIRIUS signal. Objects which can obstruct the antenna could be a roof rack, a sunroof, a roof-mounted cargo container, another antenna, etc. If your vehicle has a potential obstruction, be sure that the SIRIUS antenna is mounted at least 3 inches away from it (but no closer than 3 inches from the roof edge, or trunk lid in the case of a convertible). Note: Read the DO and DO NOT installation tips beginning on page 28 for additional antenna installation information.Follow this procedure to mount the antenna:Select an appropriate mounting position for your type of vehicle that has an unob-structed area of 3 inches by 3 inches around the antenna.Attach the Rubber Cover/Tail to the antenna, as shown in Figure 4, and press the antenna cable into the rubber cover/tail. The Rubber Cover/Tail will help to posi-tion the antenna the correct distance from the edge of the roof or trunk lid.Clean the surface area of the vehicle where you will be installing the antenna with the alcohol prep pad.1.2.3.Rubber AntennaCover/TailProtectiveStrips StrainReliefCableMagnetic Antenna(Upside-Down)Figure 4

[ Installation ] 19Peel the protective material from the adhesive strips (see Figure 4, on page 18) and press the rubber Cover/Tail firmly into place on the vehicle.Double check that the location of the antenna and rubber cover/tail are correct, and continue to press firmly down on the Rubber Cover/Tail for another 30 seconds. At room temperature (68° F), maximum adhesion usually occurs within 72 hours. During this period, avoid car washes and other contact with the antenna and the Rubber An-tenna Cover/Tail.CABLE ROUTINGAfter you have mounted the antenna you can route the antenna cable to the SIRIUS Vehicle Dock. Separate antenna cable routing procedures are provided for each type of vehicle: Sedan/Coupe, Pickup Truck, SUV/Mini-Van and Convertible.Note that additional breakout illustrations for each step of the antenna cable routing procedures can be found on the SIRIUS website at http://www.sirius.com. Click on the Install/Activate link and then follow the link for the Car Installation Tips.4.5.

[ Installation ]20Sedan /Coupe Antenna Cable Routing ProcedureFigure 5 shows how the antenna cable should be routed from the antenna to your SIRIUS radio in a sedan/coupe.1. Feed Cable Under Rubber Molding Around Window4. Route Cable from Trunk Under Interior Trim, into Cabin and Towards Front of Vehicle6. Bring Cable Out To SIRIUS Receiver Location5. Bring Cable out from Trim and Route Under Carpet to Dashboard or Console.2. Route Cable Out of Window Molding and Into Weatherstripping Around Trunk Opening3. Route Cable Along Trunk Wall and Into CabinANTENNAFigure 5

[ Installation ] 21Follow these detailed cable installation instructions:Feed the cable from the antenna underneath the rubber molding around the rear window. Use a plastic putty knife or similar object to lift the rubber molding around the rear window and tuck the antenna cable underneath the molding. Route the an-tenna cable around and down the window to the lowest point. If your rear window does not have rubber molding, SIRIUS recommends consulting with a professional installer.Route the antenna cable out of the window molding and into the rubber weather stripping around the trunk opening. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping. To avoid sharp bends in the cable, run the cable inside of the weather stripping for a few inches, then remove the cable from the weather stripping inside of the trunk. Keep the cable away from hinges, gears, etc., that could damage it.Route the cable out from the rubber weather stripping and along the trunk wall. Continue routing the cable into the cabin through a conduit or along an existing wiring harness.Route the cable through the main cabin area under the interior trim, towards the front of the vehicle. Use the plastic putty knife to lift the plastic trim just enough to tuck the ca-ble under underneath. Avoid side airbag locations on back pillars and above the doors. (Airbag locations are marked with “SRS” logos.) Be careful not to crimp or cut the cable.Bring the cable out from the trim near the firewall and route it under the carpet toward the dashboard or console. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties.Bring the end of the cable out at the SIRIUS Vehicle Dock location. Leave yourself enough cable so you can easily connect it to the antenna connector on the Vehicle Dock.1.2.3.4.5.6.

[ Installation ]22Pickup Truck Antenna Cable Routing ProcedureFigure 6 shows how the antenna cable should be routed from the antenna to your SIRIUS radio in a pickup truck.1. Route Cable Under Rubber Molding Around Windshield2. Continue Tucking Cable Under Molding To Bottom of Windshield3. Route Cable Out of Molding and Into Weatherstripping Around Door Opening. Continue to Bottom of Door Opening.4. Bring Cable out from Weatherstripping and Route Under Carpet5. Bring Cable Out to SIRIUS Receiver LocationANTENNAFigure 6

[ Installation ] 23Follow these detailed cable installation instructions:Use a plastic putty knife or similar tool to lift the rubber molding around the wind-shield and tuck the antenna cable underneath it.Continue tucking the cable underneath the windshield molding around the wind-shield to the lowest corner.At the lowest corner of the windshield, route the cable out of the windshield mold-ing and into the rubber weather stripping around the door opening. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping. Run the cable inside of the weather stripping to the bottom of the door opening.Pull the cable out of the weather stripping at the bottom of the door opening and route it under the carpet toward the dashboard. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties.Bring the end of the cable out at the SIRIUS Vehicle Dock location. Leave yourself enough cable so you can easily connect it to the antenna connector on the Vehicle Dock.1.2.3.4.5.

[ Installation ]24SUV/ Mini-Van Antenna Cable Routing ProcedureFigure 7 shows how the antenna cable should be routed from the antenna to your SIRIUS radio in an SUV or a Mini-Van.1. Feed Cable Under Rubber Seal Around Hatch Opening3. Route Cable Under Carpet to Dashboard4. Bring Cable Out To SIRIUS Receiver Location2. Route Cable Under Interior Trim, into Cabin and Towards Front of VehicleANTENNAFigure 7

[ Installation ] 25Follow these detailed cable installation instructions:Feed the antenna cable underneath the rubber weather stripping of the rear tail-gate window/door and route the cable along the rear hatch. Lift the weather strip-ping from the opening and tuck the cable inside it, then replace the weather strip-ping. Pull the cable out from weather stripping and route it into the cabin under the interior trim. Avoid hinges or gears that could crimp or cut the cable.Route the cable through the SUV’s main cabin area under the interior trim, towards the front of the vehicle. Use a plastic putty knife to lift the plastic trim just enough to tuck the cable under underneath. Avoid side airbag locations on back pillars and above the doors. (Airbag locations are marked with “SRS” logos.) Be careful not to crimp or cut the cable.Bring the cable out from the trim near the firewall and route it under the carpet toward the dashboard or console. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties.Bring the end of the cable out at the SIRIUS Vehicle Dock location. Leave yourself enough cable so you can easily connect it to the antenna connector on the Vehicle Dock.1.2.3.4.

[ Installation ]26Convertible Antenna Cable Routing Procedure Figure 8 shows how the antenna cable should be routed from the antenna to your SIRIUS radio in a convertible.6. Bring Cable Out To SIRIUS Receiver Location1. Bring Cable from Antenna Into Inside of Trunk Lid2. Tape Cable Along Inside of Lid to Hinge Strut4. Route Cable from Trunk Under Interior Trim, into Cabin and Towards Front of Vehicle5. Bring Cable out from Trim and Route Under Carpet to Dashboard or Console.3. Tie Cable to Hinge Strut, Allowing Slack for Lid to Open and Close. Route Cable Into Cabin Through Existing Wire Channel. ANTENNAFigure 8

[ Installation ] 27Follow these detailed cable installation instructions:Bring the cable from the antenna into the trunk at the front edge of the trunk lid. Keep any bends in the cable loose. Tape or tie the cable along the inside of the trunk lid to the trunk lid hinge strut.Allow enough slack in the cable so the trunk lid can easily open and close and keep the cable away from hinges, gears, etc., that could crimp or cut it. Route the cable along the trunk wall and into the cabin through a conduit or along an existing wiring harness.Route the cable through the main cabin area under the interior trim, towards the front of the vehicle. Use a plastic putty knife to lift the plastic trim just enough to tuck the cable under underneath. Avoid side airbag locations on back pillars and above the doors. (Airbag locations are marked with “SRS” logos.) Be careful not to crimp or cut the cable.Bring the cable out from the trim near the firewall and route it under the carpet toward the dashboard or console. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties.Bring the end of the cable out at the SIRIUS Vehicle Dock location. Leave yourself enough cable so you can easily connect it to the antenna connector on the Vehicle Dock.1.2.3.4.5.

[ Installation ]28TIPS The following DO and DO NOT antenna mounting tips illustrate how to install the an-tenna for optimal performance, and also illustrate where the antenna should not be installed.DOMount the antenna on the roof, at least 3 inches from the edge.DOMount the antenna on the roof where it has a clear view of the sky in all directions.

[ Installation ] 29DOMount the antenna on the roof where it has at least 3 inches of clear space around it.3”DOUse the supplied Rubber Tail Cover to protect the antenna cable.

[ Installation ]30DO NOTDon’t mount the antenna inside the vehicle, for example, on the dashboard.DO NOTDon’t mount the an-tenna on any of the vehicle’s front, back or side pillars.

[ Installation ] 31DO NOTDon’t mount the an-tenna close to a roof rack. Adjust the rack so it’s further away from the antenna or move the antenna closer to the center of the roof.DO NOTDon’t mount the antenna close to another antenna. Mount it at least 3 inches away.

[ Installation ]32DO NOTDon’t mount the an-tenna closer than 3 inches from the edge of the roof. Use the supplied rubber tail/cover as a guide for judging proper length and correct position-ing.Docking Your SIRIUS InV2To place your SIRIUS radio into the Dash Mount, gently slide the U-shaped fitting on the back of the InV2 unit into the Dash Mount until it snaps into place (see Figure 9).Figure 9

[ Installation ] 33Connecting the AntennaAfter you’ve routed the antenna cable to the Dash Mount and docked the InV2, connect the antenna cable to the ANT connection on the unit’s left side (see Figure 10.)Connecting the Cigarette Lighter AdapterConnect the provided cigarette lighter adapter to the 5VDC connector on the left side of the InV2 unit. (See Figure 11.)Note: Do not power the InV2 directly from your vehicle’s 12VDC power system without using the Cigarette Lighter Adapter. This could damage your SIRIUS radio. AntennaConnectionInV SI2 Unit(Left Side)AntennaCableConnectorFigure 10InV SI2 Unit(Left Side)5V DCConnection12VPowerOutletCigarette LighterAdapterFigure 11

[ Installation ]34Connecting Your SIRIUS InV2 to Your Vehicle’s Audio SystemThere are two ways to connect your SIRIUS InV2 to your vehicle’s audio system: Direct Connection or Wireless Connection. Which one will perform best in your vehicle depends on your vehicle’s audio system. For the latest information go to http://www.sirius.com/vehicleinstallation.Direct Wired Audio ConnectionIf your vehicle’s audio system has an “AUX IN” or “LINE IN” jack it is the best-quality audio connection you can use for your SIRIUS radio. (And if the AUX IN or LINE IN connector is located somewhere on the front of your vehicle radio or elsewhere in the cabin, this is also the easiest way to connect your SIRIUS receiver.)1. Purchase an audio cable that matches the connection type of your vehicle’s audio system and your SIRIUS InV2 unit at your local electronics retailer. • The InV2 unit requires a male 1/8” stereo connector. 2. Plug the cable’s male 1/8” stereo connector into the AUDIO jack on the left side of the InV2 unit. Plug the other end into the AUX IN/LINE IN connector on your vehicle’s audio system. (See Figure 12.)Stereo Cable(Sold Separately)AUDIOJackVehicle RadioTo AUX INor LINE INConnectorInV SI2 Unit(Left Side)Figure 12

[ Installation ] 35Direct FM Audio ConnectionIf your vehicle’s audio system does not have an Aux In/Line In connection, a SIRIUS FM Direct Adapter (sold separately) will provide the next best quality connection between your SIRIUS InV2 and your vehicle radio. You will listen to your SIRIUS radio through your car radio’s FM tuner, but the SIRIUS FM Direct Adapter connects your vehicle’s FM radio directly to your SIRIUS radio’s FM Out jack, eliminating the outside static and interference you sometimes experience when using a wireless FM connection. (See Figure 13.)NOTE: Professional installation may be required. See your local SIRIUS retailer. The SIRIUS FM Direct Adapter is available at your local SIRIUS retailer or at http://shop.sirius.com. Follow to the instructions included with the FM Direct Adapter.Vehicle RadioAntennaConnectionVehicleAntennaFM OUTJackInV SI2 Unit(Left Side)FM Direct Adapter(Sold Separately)FM ModeFM ModeFigure 13

[ Installation ]36Cassette AdapterIf your vehicle’s audio system has a cassette player you can purchase a cassette adapter from your local electronics retailer or from SIRIUS at http://shop.sirius.com. Plug the adapter’s connector into the AUDIO jack on the left side of the InV2 unit, and insert the adapter into your vehicle’s cassette player. (See Figure 14.)Note: Refer to the cassette adapter’s instructions for correct use.Cassette ModeCassette ModeVehicle RadioCassette Adapter(Sold Separately)InV SI2 Unit(Left Side)AUDIOJackFigure 14

[ Installation ] 37Wireless Audio ConnectionIf you cannot connect your SIRIUS InV2 directly to your vehicle’s audio system, it con-tains an FM transmitter that will ‘broadcast’ its audio to your vehicle’s FM radio. To use this you need to tune the InV2’s FM transmitter to an FM frequency that’s not being used in your area (see Figure 15). If you use an FM channel that is being used by a local broadcaster, it will interfere with the performance of your SIRIUS radio. 1. Use your vehicle radio’s Tune function (not the Scan function) to tune through its FM channels to find an FM channel (between 88.1MHz and 107.9MHz) that is not broadcasting in your area. • If you’re not sure which FM channels are not broadcasting in your home or travel cities, you can also go to http://www.sirius.com/fmchannel and search for a suggested FM channel based on your zip code. 2. Once you have located an FM channel that is not broadcasting in your area, save it as a preset on your vehicle radio. This will become your SIRIUS preset. 3. Dock your SIRIUS receiver and turn its power ON. Wait for the Channel Update to finish before pressing any buttons. SIRIUS InV SI2Vehicle Radio MATCHCHANNELSFigure 15

[ Installation ]38 4. Press and hold the FM PRESETS button. The InV2’s display will show the FM1 preset frequency (see Figure 16). Note: FM1 is factory-set to 88.1MHz. This may not be the best frequency for your area. 5. Press the Select button to select the FM1 preset. 6. Use the Channel UP/DOWN buttons to browse-through the different FM channels until the channel you saved as a preset in Step 2 on page 37 appears (see Figure 17). 7. Press the Select button. The new channel will now be the FM1 preset.To listen to your SIRIUS radio, turn your SIRIUS radio ON, then turn your vehicle’s FM radio ON and press the SIRIUS preset you set in Step 2, on page 37. You should hear your SIRIUS radio through your vehicle’s FM radio.FM PresetsButtonSelectButtonChannelUP/DOWNButtonsFigure 16Figure 17

[ Installation ] 39TIP: If you regularly travel between cities with different active FM channels, you may need to find channels that are not broadcasting in each city. Your SIRIUS InV2 can store 5 different preset FM transmitter channels so you can easily switch to the best FM channel for each city.Wireless Audio Connection Using the FM Extender AntennaYour SIRIUS radio includes an FM Extender Antenna (FEA) that can maximize the audio quality of your SIRIUS radio when using a Wireless Connection. The FM Extender Antenna brings the FM signal transmitted from your SIRIUS radio into close proximity with your vehicle’s FM antenna to provide a strong FM signal for good reception (see Figure 18). Because of the different kinds and locations of radio antennas found in different vehicles, SIRIUS suggests that the FM Extender Antenna be professionally installed in your vehicle. Professional installation provides an experienced technician to install the Extender Antenna, knowledge of your vehicle for locating its radio antenna, and routing the cable and connecting it to your SIRIUS radio. Ask your SIRIUS retailer if they provide professional installation services, or can recommend a professional installation service.Vehicle Radio SIRIUS InV SI2FM Extender AntennaVehicle FM AntennaMatch ChannelsFigure 18

[ Installation ]40IMPORTANT NOTEThe FM Extender Antenna is placed inside your vehicle in close proximity to the vehicle’s FM antenna. In order for it to provide a strong FM signal for good reception, it MUST be mounted in the correct location and orientation, as described in the following section. The correct mounting location and orientation is determined by the type and location of the vehicle’s FM antenna.WARNING AND SAFETY INFORMATIONSafety PrecautionsBe sure to observe the following warnings. Failure to follow these safety instructions and warnings may result in a serious accident and/or personal injury.Installation must be performed according to this installation guide. SIRIUS is not responsible for issues arising from installations not performed according to the pro-cedures in this guide.Do not install the FM Extender Antenna where it will hinder or block your view. In some states it may be illegal to mount it on the windshield of your vehicle. Check applicable law for any restrictions or limitations before installing the extender cable on your windshield.Do not install the FM Extender Antenna where it may hinder the function of safety devices such as an airbag. Doing so may prevent the airbag from functioning prop-erly in the event of an accident.The installation and use suggestions contained in this manual are subject to any restrictions or limitations that may be imposed by applicable law. The purchaser should check applicable law for any restrictions or limitations before installing the extender cable.••••

[ Installation ] 41WARNINGNotice To Drivers In California and MinnesotaState law prohibits drivers in California and Minnesota from using suction mounts on their windshields while operating motor vehicles. Other dashboard or friction mounting options should be used. SIRIUS does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice. (See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71)A NOTE ABOUT THE INSTALLATION PROCEDUREBefore you permanently mount the FM Extender Antenna (FEA), you will first mount it using the included suction cup mounts to test the installation. Once you find an acceptable location, you will remove the suction cups and permanently adhere the FEA using its adhesive mounts.

[ Installation ]42INSTALLATIONStep 1: Determine the type and location of your vehicle’s FM antennaThe key to properly installing the FEA in your vehicle is being able to determine the type and location of your vehicle’s FM antenna. The type and location of the FM antenna in your vehicle should be one of the following (see Figure 19, opposite):A. Whip/aerial mounted on the front fender or hood: A fixed or retractable aerial antenna located on the front fender or hood of the vehicle.B. Whip/aerial mounted in the A-pillar of car frame: A fixed or retractable aerial antenna located in the A-pillar of the vehicle’s frame.C. In-glass, in the rear windshield: Several lengths of wire in the rear windshield glass, usually near the top of the window. There is a difference between the FM antenna and the rear window defroster wires found in many vehicles. The FM antenna wires have uneven spacing, breaks in the wires, and some of the wires do not run from edge-to-edge in the glass, while the rear window defroster wires have uniform spacing and all wires run from edge-to-edge in the glass.D. Whip/aerial mounted on rear part of roof: A whip or aerial antenna mounted on the rear part of the roof (often just above the rear windshield glass). The whip or aerial should be 7 inches or longer.E. Whip/aerial mounted on the rear fender or trunk: A fixed or retractable whip or aerial antenna located on the rear fender or trunk of the vehicle.F. Whip/aerial mounted on front part of roof: A whip or aerial antenna mounted on the front part of the roof (often just above the front windshield glass). The whip or aerial should be 7 inches or longer.G. In-glass, in the front windshield: One or more strands of wire in the front wind-shield, usually near the top of the windshield.H. In-glass, in a rear side window: Several strands of wires in a rear side window, often found in SUVs, mini-vans and station wagons.

[ Installation ] 43A. B.C. D. E.F. H.G.Figure 19

[ Installation ]44Step 2: Prepare the FEA for temporary installationAttach the suction cups to the antenna portion of the FEA in the positions shown in Figure 20. The antenna portion of the FEA is the relatively thinner section of the cable in between the bead and the arrow that transmits the FM signal to your vehicle’s FM antenna.Step 3: Use the suction cups to temporarily install the FEA according to your vehicle’s antenna typeOn the next several pages you will find the FEA mounting location for your type of FM antenna (A, B, C, etc.). Before attaching the FEA, clean the area where the suction cups will be mounted with the supplied alcohol swab. The FEA wire between the two suction cups should be pulled taut and as straight as possible, and should not obstruct the driver’s view.Figure 20ATTACH SUCTION CUPS AS SHOWNON BOTH ENDS OF THE THIN WIRETHIS THINNER PORTION OF THE FEA ISWHAT TRANSMITS THE FM SIGNAL TOYOUR VEHICLE’S FM ANTENNADURING THE FINAL INSTALLATION USE THE CABLEGUIDES TO HOLD THE CABLE IN POSITION UNTILIT REACHES THE INNER TRIM OR MOULDING CONNECTS TO YOUR SIRIUSVEHICLE DOCK’S FM OUTCONNECTORANTENNACABLEBEADARROW

[ Installation ] 45For vehicles with A and B type FM antennas:Whip/aerial mounted on the front fender or hoodWhip/aerial mounted in the A-pillar of car frameMount the FEA vertically on the front windshield at the edge of the glass, on the same side as the vehicle’s antenna (i.e. nearest to the antenna). See Figure 21. Clean the suction cup mounting areas with the alcohol swab. The FEA wire between the two suction cups should be pulled taut, and as straight as possible, and should not obstruct the driver’s view.Caution: In some states it may not be legal to put the FEA on the windshield glass. In this case, the FEA should be mounted on the A-Pillar adjacent to the vehicle’s FM antenna.••Alternate MountingLocation on AdjacentA-PillarMount FEA at Edgeof Windshield Nearestto Vehicle AntennaA. B.Figure 21

[ Installation ]46For vehicles with C and D type FM antennas:In-glass, in the rear windshieldWhip/aerial mounted on rear part of roofMount the FEA horizontally along the top edge of the rear windshield (see Figure 22). For vehicles with a rooftop antenna, center the FEA below the antenna whip. For vehicles with an in-glass antenna, the FEA should be directly over one of the FM antenna’s wires. Note: Do not install the FEA over the defroster wires (see inset on Figure 22). Clean the suction cup mounting areas with the alcohol swab. The FEA wire between the two suction cups should be pulled taut, and as straight as possible, and should not obstruct the driver’s view.••FM ANTENNADEFROSTER WIRESC. D.Mount FEA onRear WindshieldFigure 22

[ Installation ] 47For vehicles with an E type FM antenna:Whip/aerial mounted on the rear fender or trunkMount the FEA vertically on the rear windshield at the edge of the glass, on the same side as the vehicle’s antenna (i.e. nearest to the antenna). See Figure 23. Clean the suction cup mounting areas with the alcohol swab. The FEA wire between the two suction cups should be pulled taut, and as straight as possible, and should not obstruct the driver’s view.•Mount FEA at Edgeof Windshield Nearestto Vehicle AntennaE.Figure 23

[ Installation ]48For vehicles with F or G type FM antennas:Whip/aerial mounted on the front part of roofIn-glass, in the front windshieldMount the FEA horizontally along the top edge of the front windshield or install it into the headliner of the vehicle just above the front windshield (see Figure 24). For vehicles with a rooftop antenna, center the FEA below the antenna whip. For vehicles with an in-glass antenna, the FEA should be directly over the antenna wire itself. Clean the suction cup mounting areas with the alcohol swab. The FEA wire between the two suction cups should be pulled taut, and as straight as possible, and should not obstruct the driver’s view.Caution: In some states it may not be legal to put the FEA on the windshield, so the FEA should be installed into the headliner. Remove the suction cups and tuck the wire into the headliner, stretched taut and straight.••Alternate MountingLocation TuckedInto HeadlinerMount FEA AlongTop Edge ofWindshieldF. G.Figure 24

[ Installation ] 49For vehicles with an H type FM antenna:In-glass, in a rear side windowMount the FEA directly over the in-glass antenna wires. If the antenna wires are vertical, mount the FEA vertically on the glass; if the in-glass antenna wires are horizontal, mount the FEA horizontally on the glass. (See Figure 25.) Clean the suction cup mounting areas with the alcohol swab. The FEA wire between the two suction cups should be pulled taut, and as straight as possible, and should not obstruct the driver’s view.•H.Mount FEA DirectlyOver Antenna WiresFigure 25

[ Installation ]50Step 4: Temporarily plug the FEA into the InV2’s FM OUT connectorSee Figure 26.Step 5: Tune your vehicle’s FM radio to an FM channel that’s not being used in your areaUse your vehicle radio’s Tune function (not the Scan function) to find an FM channel (between 88.1MHz and 107.9MHz) that is not broadcasting in your area. If you’re not sure which FM channels are not broadcasting in your home or travel cities, you can also go to http://sirius.com/fmchannel and search for a suggested FM channel based on your zip code.• Once you have located an FM channel that is not broadcasting in your area, save it as a preset on your vehicle radio. This will become your SIRIUS preset.FM OUTJackCable FromFM Extender AntennaInV SI2 Unit(Left Side)Figure 26

[ Installation ] 51Step 6: Set Your SIRIUS InV2’s FM transmitter to the same FM channela. Dock your SIRIUS receiver and turn its power ON. Wait for the Channel Update to finish before pressing any buttons.b. Press and hold the FM PRESETS button. The InV2’s display will show the FM1 preset frequency (see Figure 27). Note: FM1 is factory-set to 88.1MHz. This may not be the best frequency for your area.c. Press the Select button to select the FM1 preset. d. Use the Channel UP/DOWN buttons to browse-through the different FM channels until the channel you saved as a preset in Step 5 on page 50 appears (see Figure 28).e. Press the Select button. The new channel will now be the FM1 preset.To listen to your SIRIUS radio, turn your SIRIUS radio ON, then turn your vehicle’s FM radio ON and press the SIRIUS preset you set in Step 5, on page 50. You should hear your SIRIUS radio through your vehicle’s FM radio.FM PresetsButtonSelectButtonChannelUP/DOWNButtonsFigure 27Figure 28

[ Installation ]52Step 7: Optimize the placement of the FEAMute the volume of your InV2. (Press the MENU button, then select AUDIO LEVEL and turn the volume down to zero. See Audio Level, on page 67.) Note, your SIRIUS radio is still ON.Turn up the volume of your vehicle’s FM radio. If you hear static or interference adjust the position of the FEA until the static or interference is eliminated or minimized (see Figure 29).If the level of static or interference is still high, please select another FM channel by repeating Steps 5 & 6, on pages 50 – 51.1.2.3.Figure 29

[ Installation ] 53Step 8: Permanently install the FEANote: If you are mounting the FEA in the vehicle’s headliner, skip this step. When you are satisﬁ ed with the FEA’s mounting location, remove the suction cup mounts and peel the backing off the bead and arrow adhesive mounts. Clean the area where the FEA will be attached with the alcohol swab. Permanently adhere the FEA in the same position on the glass (or A-pillar), making certain the wire is taut and is as straight as possible (see Figure 30). If necessary, use the cable guides to hold the cable.Figure 30REMOVEADHESIVE BACKINGFROM ARROWREMOVEBOTH SUCTION CUPS USE THE CABLE GUIDES TO HOLD THE CABLEIN POSITION UNTIL IT REACHESTHE INNER TRIM OR MOULDING REMOVEADHESIVE BACKINGFROM BEADTHIS THINNER PORTION OF THE FEASHOULD BE TAUT WHEN THE FEAIS PERMANENTLY ADHERED

[ Installation ]54Step 9: Route and hide the cable through the vehicle to the Vehicle DockHide the FEA cable by properly routing it to your SIRIUS Vehicle Dock (see Figure 31). Use the cable guides to hold the cable in place until it reaches the inner trim or mould-ing at the edge of the window. Take advantage of any existing cable channel or wiring conduit and route the cable around the passenger compartment to the Vehicle Dock. Take care not pull the cable across sharp edges that could damage it, and keep it away from areas where it might entangle feet. Coil and secure any excess antenna cable in a location where it can be hidden and secured (such as under the carpet or floor mat). Plug the FEA cable into the Vehicle Dock’s FM OUT connector (see Figure 33, on page 56).Figure 31

[ Installation ] 55Appendix A: Tips for Identifying the FM AntennaCorrectly identifying your vehicle’s FM antenna is a key to successfully installing the FEA. The preceding installation section already showed you the different kinds of FM antennas found on vehicles. However, there are several types of antennas found on vehicles that you may at first believe to be the FM antenna but which in reality are not. Instead they may actually be GPS, OnStar®, cell phone, factory-installed satellite radio antennas, or another type of antenna.Please be aware of the following when identifying your vehicle’s FM antenna:Puck-type antennas and shark-fin type antennas are never the FM antenna. Figure 32 shows several types of these antennas which should not be mistaken for an FM antenna. If you have located one of these types of antennas on your vehicle you can be certain that it’s not the FM antenna. Continue your search to find the actual FM antenna.1.Figure 32

[ Installation ]56Greater confusion may arise with whip type antennas. Figure 33 shows some whip type antennas which can be found on the front or rear of a vehicle’s roof, or on the rear windshield. Some of these antennas could be the FM antenna and some are not the FM antenna.Antennas with a short 2-4 inch stubby whip or protrusion are not FM antennas, while antennas with a whip length of 7 inches or longer are likely to be the FM antenna. If your vehicle has a short stubby antenna, you should continue searching your vehicle’s FM antenna.If after searching your vehicle you’re still uncertain as to where its FM antenna is located then SIRIUS recommends professional installation of the FM Extender Antenna. Ask your SIRIUS retailer if they provide professional installation services, or can recommend a professional installer.If you don’t correctly identify your vehicle’s FM antenna, the installation of the FEA will result in poor performance and unsatisfactory results.2.3.Figure 33

[ Installation ] 57Subscribing to the SIRIUS ServiceBefore you can listen to the SIRIUS service, you need to subscribe to the SIRIUS Satel-lite Radio service. To subscribe, do the following:Be sure that your SIRIUS InV2 is correctly installed, is properly docked in the Ve-hicle Dock, and that the antenna is oriented to receive the SIRIUS signal.Turn on the InV2. After the startup se-quence, it will update the SIRIUS channel line-up (see Figure 34a). Wait until the channel updates have completed before pressing any buttons.Once the channels have been updated, the radio will automatically tune to chan-nel 184 and the display will change to Call 1-888-539-SIRIUS to Subscribe (see Figure 34b). You will not be able to listen to any other channels until you activate your SIRIUS subscription.Use the Channel UP/DOWN buttons to tune to channel 0 to display your InV2’s unique 12-digit SIRIUS ID Number (SID). See Figure 34c. Write the SID number down.The SID number is also available on your InV2’s packaging, Have your credit card handy and contact SIRIUS on the Internet at: https://activate.siriusradio.com/ and follow the prompts to activate your subscription. You can also call SIRIUS toll-free at: 1-888-539-SIRIUS (1-888-539-7474).When you have successfully subscribed to the SIRIUS service your InV2 will dis-play UPDATED (see Figure 34d). To continue, press any button.You are now ready to begin enjoying SIRIUS Satellite Radio’s digital entertainment, and can tune to other channels!1.2.3.4.•5.6.a.b.c.d.Figure 34

[ Controls ]58ControlsSIRIUS InV2 Front Panel and ConnectionsFigure 35 and the section following identify and describe the SIRIUS InV2’s buttons, controls and connections. 1. LCD Display: Displays information about the InV2’s operation and about the pro-gram that is playing. 2. Power Button: Turns the radio’s power ON and OFF. 3. FM Presets Button: Selects between different preset frequencies used by the built-in wireless FM transmitter. 2 3 4 569101112178Figure 35

[ Controls ] 59 4. Display (DISP) Button: Pressing the DISP button toggles the display between the following modes:Channel Number and Channel NameChannel Number and Artist NameChannel Number and Song TitleChannel Number and Artist Name/Song TitleChannel Number and Category Name Pressing and holding the DISP button activates the Display Brightness menu mode, allowing you to use the Channel UP/DOWN buttons to adjust the LCD display’s brightness (see Brightness and Contrast, on page 67). 5. MENU Button: Accesses Menu Options to make setup and feature changes. Pressing and holding while in any menu screen exits the Menu Options completely and returns to the Default display screen. 6. Channel UP/DOWN Buttons: Press to tune to the next higher or lower channel. Press-and-hold to change channels up or down in increments of 10. 7. Select Button: Selects items highlighted on the display screen. When the Default screen is displayed, pressing and holding the Select button returns to the previous channel played. 8. Preset Buttons (1 – 6): Set and select preset channels. 9. DC5V Power Connector: Power connection for the supplied cigarette lighter adapter (see page 33). 10. Antenna (ANT) Connector: Connection for the supplied magnetic antenna (see page 33). 11. FM OUT Connector: FM output for use with the optional FM Direct Adapter (see page 35). 12. AUDIO OUT Connector: Audio output for directly connecting to your vehicle’s audio system (see pages 34 & 36).•••••

[ Operation ]60OperationDisplay Screen InformationWhenever you power your InV2 ON, the channel that was playing last will automatically begin playing, and the LCD display screen will show the currently-tuned channel num-ber along with either the channel name, artist name, song title, artist name/song title or the category name. Pressing the DISP button cycles the display between the different modes (see Figure 36). This screen is referred to as the Default screen in this manual.Note: Information (such as artist names and song titles) that is too large to fit on the display in its entirety will scroll from right to left. Channel Number & Channel NameChannel Number & Artist NameChannel Number & Category NameChannel Number & Song TitleChannel Number & Artist Name/Song TitleFigure 36

[ Operation ] 61Changing ChannelsPressing the Channel UP or DOWN button will immediately tune to the next or previous channel. Pressing and holding the Channel UP or DOWN button will immediately skip up or down by 10 channels. Pressing and holding the Select button will return to the channel that was playing immediately before the current channel.Channel PresetsYou can store up to 6 of your favorite channels as presets for quick access by pressing the 1 – 6 buttons.Storing Channel PresetsTo store a favorite channel as a preset, do the following:Tune the InV2 to the channel you want to store as a preset. Press and hold for 1 second the numbered preset button (1 – 6) in which you want to store the channel. You will hear an audible beep and the channel number on the display will flash to confirm that the channel has been stored as a preset.Note: If the preset button already has a channel stored in it, the newly-stored channel will replace the original preset.Selecting PresetsTo tune to a preset channel, press and release one of the 1 – 6 buttons. If you press a preset button in which no channel has been saved, a PRESET EMPTY message will be displayed (see Figure 37).1.2.Figure 37

[ Operation ]62FM Preset Button If you are using a wireless connection between your SIRIUS InV2 and your vehicle’s audio system (see page 37), the FM Preset button makes it easy to select between the InV2’s five different preset FM transmitter frequencies or select new FM transmitter preset frequencies without having to go through the Menu Options.Pressing the FM Preset button while the Default screen is active will display the current preset FM transmitter frequency (see Figure 39, left). Pressing the FM Preset button again will change to the next preset FM transmitter frequency (see Figure 39, right)Pressing and holding the FM Preset button will go directly to the Menu Options FM PRESETS screen (see page 65). Figure 39

[ Menu Options ] 63Menu OptionsMenu Options allows you to set and/or change your SIRIUS InV2’s various features and settings. The following settings are available in the Menu Options:SIRIUS IDFM PresetsFM TransmitBrightnessContrastAudio LevelTonesChannel LockEdit CodeSignalFactory SetPressing and releasing the MENU button displays the SIRIUS ID screen (see Figure 40, on page 64). While the SIRIUS ID screen is active, use the Channel UP/DOWN buttons to scroll to the next or previous menu item and press the Select button to select it. If you don’t make a selection within 10 seconds the InV2 will exit the Menu Options and revert to the Default display screen. Pressing the MENU button anywhere in the menu system will revert to the previous Menu screen; pressing and holding the MENU button will exit the Menu Options and return to the Default display screen.•••••••••••

[ Menu Options ]64SIRIUS IDThis displays your InV2’s 12-digit SIRIUS ID (SID) number (see Figure 40). The SID is unique to each SIRIUS radio, and is required to activate your service. We recommend that you write this number in the space provided near the end of this user guide.No adjustments are allowed in this mode. To exit, press the MENU button.Figure 40

[ Menu Options ] 65FM PresetsThe FM PRESETS Menu Option lets you set or change the InV2’s built-in FM transmitter preset frequencies. You can set up to 5 different FM preset frequencies. 1. When the FM PRESETS screen is displayed, press the Select button. The FM1 preset will be displayed (see Figure 41, left). Pressing the Channel UP/DOWN buttons will cycle-through the five FM presets (see Figure 41, right). When the preset you want is displayed, press the Select button.Note: The factory default setting for all 5 FM Presets is 88.1MHz. This may not be the best frequency for your area. 2. To change that preset’s FM frequency, use the Channel UP/DOWN buttons to highlight a different FM frequency (see Figure 42). When the frequency you want is displayed, press the Select button. 3. Repeat Steps 1 — 2 for as many FM presets as you wish.If you frequently travel to different areas, you can set the five FM presets to frequencies that are not being used by broadcasters in different areas.Figure 42Figure 41

[ Menu Options ]66FM TransmitThe FM TRANSMIT menu option (see Figure 43) allows you to turn the the InV2’s built-in FM transmitter ON and OFF. 1. Pressing the Select button displays the FM ON screen (see Figure 44, left). 2. Use the Channel UP/DOWN buttons to toggle between FM ON and FM OFF (see Figure 44, right). 3. When the option you want is displayed, press the Select button. Figure 44Figure 43

[ Menu Options ] 67Brightness and ContrastBrightness adjusts the overall intensity of the LCD display to help with viewing in different lighting conditions. Contrast adjusts the relationship between the background and the text on the LCD display. Pressing the Select button from the BRIGHTNESS or CONTRAST menu option (see Figure 45, left) displays a 10-segment horizontal bar graph (see Figure 45, right). Use the Channel UP/DOWN buttons to adjust the display’s brightness or contrast. The bar graph will indicate the change. When you’re finished, press the Select button to save the change.Audio LevelSelecting the AUDIO LEVEL menu option (see Figure 46, left) displays a 10-segment horizontal bar graph (see Figure 46, right). Use the Channel UP/DOWN buttons to adjust the InV2’s audio volume level. The bar graph will indicate the change. When you’re finished, press the Select button to save the change.Figure 45Figure 46

[ Menu Options ]68TonesThe TONES menu option (see Figure 47) lets you select whether to hear an audible confirmation tone as you navigate menus and lists. 1. From the TONES screen, press the Select button, and use the Channel UP/DOWN buttons to toggle between BEEP ON and BEEP OFF (see Figure 48). 2. When the option you want is displayed, press the Select button. Figure 47Figure 48

[ Menu Options ] 69Channel LockYour SIRIUS InV2 has the ability to lock channels you do not want others (such as children) to access without your permission. When browsing channels with the Channel UP/DOWN buttons, channels that are locked will have a lock icon next to their channel number (see Figure 49). When the anyone tries to tune to a locked channel, an ENTER CODE screen will be displayed and the channel won’t be accessed until the correct 4-digit code number is entered. 1. Select the CHANNEL LOCK menu option. The LOCK/UNLOCK screen will appear (see Figure 50). 2. To lock or unlock a channel, press the Select button: a. The first time you access the LOCK/UNLOCK menu, you must enter the default lock code. The default lock code is 1 1 1 1. Use the Preset buttons to enter the code number and press the Select button to set it. b. After entering the code, a list of channels will appear. c. Use the Channel UP/DOWN buttons to navigate to the channel you want to lock or unlock. When the channel is displayed, press the Select button to lock or unlock it. Locked channels will have a lock icon displayed next to their names (see Figure 49).To change the lock code from 1 1 1 1, see Edit Code, on page 70.Figure 49Figure 50

[ Menu Options ]70Edit CodeThe EDIT CODE menu option allows you to change the Lock Code. 1. When the Edit Code screen is displayed, press the Select button. The ENTER# screen (see Figure 51, left) will appear. 2. Use the Preset buttons to enter the 4-digit code number and press the Select button. The NEW CODE screen will appear (see Figure 51, right). 3. Use the Preset buttons to enter a new 4-digit code number and press the Select button. 4. You will be prompted to confirm the code (see Figure 52, left). Use the Preset buttons to re-enter the new code number and press the Select button. A confirmation screen will appear (see Figure 52, right).Note: If you have forgotten your Channel Lock code, call SIRIUS Customer Service for help.Figure 51Figure 52

[ Menu Options ] 71SignalWhen using the optional Home Docking Station or Boombox indoors, it is important to aim the SIRIUS antenna for maximum signal reception. The SIGNAL screens visually show the strength of the satellite and terrestrial signals being received by the InV2. (Refer to the Home Docking Station installation guide for more information about properly orienting the antenna.)Select the SIGNAL menu option and press the Select button. The signal strength screen will be displayed (see Figure 53). The ‘S’ bar graph indicates the strength of the SIRIUS satellite signal; the ‘T’ bar graph indicates the strength of the SIRIUS terrestrial signal (if available).Figure 53

[ Menu Options ]72Factory SetThe Factory Set menu option will restore most every feature of the radio to the original factory settings. The following is a list of all features affected by the Factory Set option:All Channel Presets are clearedFM Transmitter set to ON FM Transmitter Preset #1 set to 88.1 MHzDisplay brightness set to 50%Display Contrast set to 50%Audio level set to -3dBConfirmation Tone set to ONNote that the Channel Lock feature is not affected by the Factory Set option. If a code has been set for the Channel Lock feature, the code will not be reset by the Factory Set feature, preventing someone from circumventing the Channel Lock feature. Channels which have been locked will remain locked.To activate the Factory Set feature, and restore the above features to their factory settings, do the following: 1. Use the Channel UP/DOWN buttons to display the FACTORY SET menu option, then press the Select button. 2. Press the Channel UP/DOWN buttons to toggle between the RESTORE? Y(ES) and RESTORE? N(O) screens (see Figure 54). When the RESTORE? Y(ES) screen appears, press the Select button.•••••••Figure 54

[ Menu Options ] 73 • If you do not want to restore the InV2 to its factory settings, press the Select button when the RESTORE? N(O) screen appears. You will be taken back to the MENU OPTIONS screen. 3. The ARE YOU SURE? screen (Figure 55, left) will be displayed. Press the Select button to restore the factory settings. The RESTORING screen will appear (see Figure 55, right). • If you do not want to restore the InV2 to its factory settings, press and hold the MENU button to return to the Default screen.When the restore is complete, the InV2 will tune to the last channel that was active before the Factory Set was begun.Figure 55

[ Troubleshooting ]74TroubleshootingSymptom SolutionThe InV2 does not power ONBlown fuse, or the power cable is not properly connected.• Check for a bad fuse and check power cable connectionDisplay reads: No AntennaThe satellite antenna is not connected to the radio. • Check the satellite antenna connection to the radio.Display reads: Acquiring SignalNo satellite signal is being received. • Check for obstacles over or around the satellite antenna. • Change the vehicle location to eliminate nearby obstacles (bridges, overpasses, tress, buildings, etc.).Audio static or loss of clarityThe FM frequency contains static.• Locate a quiet FM frequency on your vehicle radio and set the InV2’s FM transmitter frequency to match.• If using the InV2’s AUDIO OUT connector, check the cable connections.No sound The audio cables are not connected, or the vehicle’s FM radio is set to the wrong frequency. • Check the audio cables at the InV2 and the vehicle’s audio system. • Tune the vehicle’s FM radio to the same FM frequency the InV2’s FM transmitter is tuned.

[ Warranty ]76WarrantySIRIUS Satellite Radio Inc. (the “Company”) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original pur-chase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company’s option) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the location shown below under WARRANTY RETURN. This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred for installation, removal or reinstallation of the product, or to damage to tapes, compact discs, speakers, accessories, or vehicle electri-cal systems. This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, ne-glect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE RE-PAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRAN-TIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 48 MONTHS FROM DATE OF ORIGINAL PUR-CHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.WARRANTY RETURN: To obtain repair or replacement within the terms of this Warranty, please return product to an authorized retailer or call Customer Service at 1-800-869-5590; proof of purchase and description of defect are required. Products to be returned to an ap-proved warranty station must be shipped freight prepaid.

[ SIRIUS ID ] 77SIRIUS IDWrite down the SIRIUS ID (SID) of your SIRIUS InV2 in the space provided below.SID:

SIRIUS Customer Service: 1-888-869-5590customercare@sirius-radio.comSIRIUS Satellite Radio Inc.1221 Avenue of the AmericasNew York, NY 100201-888-869-5590http://www.sirius.com

SI2TK1 (InV2) User Guide (081707a)sirius.comSirius Satellite Radio Inc.1221 Avenue of the AmericasNew York, NY 10020800.869.5590

Navigation menu