Quanta Computer PXC Quanta Video Presence Solution User Manual TempConfidential rev

Download:
Mirror Download [FCC.gov]
Document ID	2691701
Application ID	7H/KHp+mPzczJXBoI5FcUw==
Document Description	TempConfidential_User Manual_rev
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	153.26kB (1915763 bits)
Date Submitted	2015-07-24 00:00:00
Date Available	2016-01-23 00:00:00
Creation Date	2015-07-07 10:24:54
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2015-07-07 10:25:02
Document Title	Microsoft Word - PX3PXC quick guide_20140923_EN_rev
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ahsia

Quanta Computer Inc.
Getting to know your PX3
PX3 Video Presence Solution Quick Start Guide
The photos below show the details of PX3 camera unit and keypad unit.
Package Contents
Camera unit x 1
Keypad unit x 1
5V/3A power adapter x 1 for camera unit
12V/2A power adapter x 1 for keypad unit
Micro HDMI cable (type D) x 1
HDMI cable (type A) x 1
VGA cable x 1
LAN cable x 1
Quick start guide x 1
POWER
LAN
TV
MINI USB
Power key
OTG port
5V/3A adapter
HDMI IN
Main LED
Figure 4 camera unit
TV
Router
Installing your PX3
Figure 1 camera unit installation
1. Install camera unit: Connect LAN cable, micro HDMI cable, and power adapter to
camera unit as showed in Figure 1.
2. Place the camera unit on top of the TV and adjust the stand to fix PX3 as showed
in Figure 3.
3. Turn on TV and switch to the dedicated HDMI output channel. When PX3 menu
is displayed on TV, continue to install the keypad unit.
4. Install keypad unit: Place the keypad unit on the meeting table. Connect power
adapter to keypad unit as showed in Figure 2. Connect HDMI cable or VGA
cable (depending on the notebook interface) to keypad unit if you want to use
projector mode or screen sharing.
5. When the LCD display on the keypad unit shows “Welcome”, your PX3 is ready
for use.
Speaker
4 Direction Keys,
O K button
POWER
VGA
Audio Call
End Call
Video Call
Projector/screen
sharing mode
HDMI
Menu
Zoom In
Volume Up
Numeric Keys
Volume Down
Zoom O ut
Mute/Unmute
Reset button
12V/2A adapter
Figure 5 keypad unit view 1
Note1: It is important to install the camera unit prior to the keypad unit to
establish wireless connection between these two parts.
Note 2: The maximum distance range between camera unit and keypad unit is 5
meters. Any farther will degrade the functionality of PX3.
12:34 PM
Notebook
Figure 2 keypad unit installation
Top LED
12:34 PM
Projector/
Screen Sharing
Mode LED
Mute/Un-mute
LED
Microphone
Figure 3 camera unit stand installation
Figure 6 keypad unit view 2
Quanta Computer Inc.
Keypad function
Key
Using your PX3
Name
Function
Up
In menu page, it is used to move cursor upward.
In preview or video call session, it is used to rotate
camera’s view angle upward.
Down
In menu page, it is used to move cursor downward.
In preview or video call session, it is used to rotate
camera’s view angle downward.
Left
In menu page, it is used to move menus or cursor
leftward.
In preview or video call session, it is used to rotate
camera’s view angle leftward.
Right
In menu page, it is used to move menus or cursor
rightward.
In preview or video call session, it is used to rotate
camera’s view angle rightward.
OK
It is used to confirm the selection or pop up soft
keyboard in editing columns.
Audio Call
Make audio call to the dialed numbers.
Video Call
Make video call to the dialed numbers.
End Call
In a call session, end a video or audio call.
In menu page, return to the last page or status.
Mode switch
Enable projector or screen sharing mode
Menu
Enable/disable menu
Volume Up
Turn volume up
Volume Down
Turn volume down
Zoom In
Zoom in camera
Zoom Out
Zoom out camera
Mute
Enable/disable mute function
Numeric keys
In any menu page, press any numeric key to pop up
dial page and input numbers.
In text input field, it is used to input the numbers.
In dial page or text input field, press “0” for 2
seconds and then release to input “+”.
In any menu page, press “*” to pop up dial page and
input “*”.
In text input field input “*”.
In any menu page, press “#” to pop up dial page and
input “#”. In text input field input “#”.
• How to set up the network
Go to Settings → Network Settings. Select DHCP to assign IP address. After setup,
press [Save] to exit. For fixed IP users, please unclick DHCP and specify an IP/ DNS
address. In text input field, Press Ok key to activate the soft keyboard. Press
[Done] key on soft keyboard to finish editing each column. Press [Save] key on
menu to exit. Return to the main menu by pressing the Menu button on the
on top right of TV screen should
keypad unit. The network connection icon
icon instead, please return to network setting page to
be on. If you see
reconfirm the setting. If network connection still fails, contact your MIS for
further assistance.
Note: Please check with your MIS for the IP/DNS address information required
in the network setting page.
• How to set up the SIP account
Go to Settings → SIP Account for setup. You can find the SIP setting label on the
bottom of keypad unit. Please input all the information on that label into the SIP
account setting page. In text input column, press ok key to activate soft keyboard.
Press [Done] key on soft keyboard to finish editing each column. After setup,
press [Save] to exist. Return to the main menu by pressing the Menu button on
on top right of TV screen will turn white
the keypad unit. The handset icon
instead, please return to SIP
when the SIP account is ready for use. If you see
Account page to re‐confirm the setting.
• How to make a video call with phone numbers
Input phone numbers with the keypad on the keypad unit and then press the
Video call key.
• How to make a video call from contact list
Go to Contacts and use Left/Right key on the keypad unit to brows contact list.
Press Ok key to select one of the contacts you wish to call. In the contact info
window, select [Video call] and press Ok key on keypad unit to make video call.
• How to make an audio call with phone numbers
Input phone numbers with the keypad on the keypad unit and then press the
Audio call key.
• How to make an audio call from contact list
Go to Contacts and use Left/Right key on the keypad unit to brows contact list.
Press Ok key select one of the contacts you wish to call. In the contact info
window, select [Audio call] and then then press Ok key on keypad unit to make
audio call.
• How to add a new contact
Go to Contacts. Press Menu key on the keypad unit. Select [Add a new contact].
Use Up/Down key to go to the desired column for editing. Press Ok key to
activate soft keyboard for edit. Press [Done] key on soft keyboard to finish editing.
Press [Save] key to exit.
• How to use projector mode
In any page of PX3 TV screen, connect your notebook or video player to PX3
keypad unit with either a HDMI cable or VGA cable. Press Mode switch key on
the keypad unit to use projector mode.
• How to use screen sharing
During a video call, connect your notebook to PX3 keypad unit with either a
HDMI or a VGA cable and then press Mode switch key on the keypad unit to
share the contents.
• Firmware update
PX3 will automatically download new version software if available on server. Go
to Settings → Firmware Update to check if there is new version info displayed at
the bottom right of the screen. Select [Update] if you wish to update your PX3
with the new software.
• How to shut down PX3
Press the power button on the camera unit (as showed in Figure 1) for 3 seconds.
The TV screen will display “Shutting down” message indicating PX3 is shutting
down.
• How to restart PX3
Press the power button on the camera unit (as showed in Figure 1) for 3 seconds.
The TV screen will display “Shutting down” message indicating PX3 is shutting
down. When the TV screen is off, press power key on the camera unit again to
restart PX3. When PX3 menu is displayed on TV, press the reset button on
keypad unit as showed in Figure 5 to reset keypad unit. When the LCD display
on keypad unit showed “Welcome”, your PX3 is ready for use.
Note: Please always shut down and restart PX3 by pressing the power button.
Shutting down PX3 by unplugging power cord directly may damage the system.
Trouble shooting
• Reset keypad unit
If you cannot set up the connection between the camera unit and keypad unit,
please press the reset button on keypad unit as showed in Figure 5.
• Reset PX3
If unexpected system failure occurs, please press the power button on camera
unit as showed in Figure 1 for 10 seconds to shut down the system. Press the
power button again to restart the system. When PX3 menu is displayed on TV,
press the reset button on keypad unit as showed in Figure 5 to reset keypad unit.
When the LCD display on keypad unit shows “Welcome”, your PX3 is ready for
use.
CE Marking
This device has been tested to and conforms to the regulatory requirements of the
European Union and has attained CE Marking. The CE Mark is a conformity marking
consisting of the letters “CE”. The CE Mark applies to products regulated by certain
European health, safety and environmental protection legislation. The CE Mark is
obligatory for products it applies to: the manufacturer affixes the marking in order
to be allowed to sell his product in the European market.
This product conforms to the essential requirements of the R&TTE directive
1999/5/EC in order to attain CE Marking.
Quanta Computer Inc.
The CE Marking is not a quality mark. Foremost, it refers to the safety rather than to
the quality of a product. Secondly, CE Marking is mandatory for the product it
applies to, whereas most quality markings are voluntary.
Marking: The product shall bear the CE mark.
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the
equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) this device may not cause harmful interference and
2) this device must accept any interference received, including interference that
may cause undesired operation of the device.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This transmitter must not be co‐located or operating in conjunction with any other
antenna or transmitter.
where FCC ID: 2ACIK‐HS6618U is the module's FCC certification number.
RF statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
The Keypad Unit supports RF functions including 5.2 GHz、5.8 GHz wireless digital
audio transceiver and UWB/WiMedia Band Groups 3 receiver. Wireless digital audio
transceiver is designed for DARR83‐APK Wireless Audio Processor and Airoha
AL5230S RF Transceiver connected to Antenna Diversity switch for 5.2GHz、5.8 GHz
802.11 a standard OFDM modulation application then It have point‐to‐point and
point‐to‐multipoint and simple pairing network architectures.
It’s a OEM module (20 x 40 mm) named WLL7011 by Askey agenda manufacture
and with embedded PCB dual‐band diversity antennas to avoid dropouts due to
multipath fading.
UWB is based upon Alereon AL5100 UWB RF transceiver and Alereon AL6301
MAC/BB for WiMedia standard and it can be used on Device side radio application.
It’s a small module (20 x 27 mm) named HS6618U‐D by Hanshin
agenda manufacture and with one WiMedia Band Groups 3 PCB antenna.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2015:07:07 10:25:02+08:00
Create Date                     : 2015:07:07 10:24:54+08:00
Metadata Date                   : 2015:07:07 10:25:02+08:00
Format                          : application/pdf
Title                           : Microsoft Word - PX3PXC quick guide_20140923_EN_rev
Creator                         : ahsia
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:eb42c3f9-f675-4695-8baf-d1a22fdb1d32
Instance ID                     : uuid:7ddcadc4-bc1b-40b3-9109-b210672ad2df
Page Count                      : 3
Author                          : ahsia

EXIF Metadata provided by EXIF.tools