Quanta Microsystems US105 IEEE 802.11 b/g WLAN module User Manual US105 User Manul 20080111

Quanta Microsystems, Inc. IEEE 802.11 b/g WLAN module US105 User Manul 20080111

Users Manual

UUSS110055 UUsseerr GGuuiiddee____ IEEE 802.11 b/g WLAN module Date: 2008/01/11 Version: 1.0
Chapter 1 Functional Description This product provides the easiest way to wireless networking. This User Manual contains instructions in the operation of this product. Please keep this manual for future reference. 1.1 Features z Includes Encore signal processing for Industry-leading receive sensitivity and extended range: ․ -71 dBm at 54Mbps z High level of integration with direct conversion radio architecture z Flexible support for a variety of system bus interfaces including: usb, minicard z Programmable data rates of 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps. z Hardware-based IEEE 802.11i encryption/decryption engine, including 64-bit/128-bit WEP, TKIP, and AES z IEEE802.1x support. z Dynamic Power Management under driver control. z WHQL-certified drivers for Windows® XP/Me/2000/98SE/98 operating systems. z Wi-Fi® compliant. 1.2 Integrated Radio Transceiver This Mini card module includes an integrated RF transceiver that has been optimized for use in 2.4-GHz WLAN systems. It has been designed to provide low-power, low-cost, and robust communications for applications operating in the globally available 2.4-GHz unlicensed ISM band. With an external transmit power amplifier, it develops full output power per the IEEE802.11b/g Specification.
1.3 Receiver Path This Mini card module has a wide dynamic range, direct conversion receiver. It employs high-order on-chip channel filtering to ensure reliable operation in the noisy 2.4-GHz ISM band. The excellent noise figure of the receiver makes an external LNA unnecessary. 1.4 Transmitter Path This Mini card module includes a linear transmitter capable of delivering up to +15 dBm while meeting the IEEE802.11g specification. The output power is adjustable in 1-dB steps, down to 0 dBm. Base-band data is up-converted directly to the 2.4-GHz ISM band. 1.5 Calibration This Mini card module enables the device to be used in high-volume applications because calibration routines are not required during manufacturing test. These calibration routines are performed periodically in the course of normal radio operation. Chapter 2 Installation Driver 2.1 Driver Features  IEEE 802.11b/g  Ad-Hoc / Infrastructure  WEP 64 / 128-bit  WPA-PSK / WPA2-PSK (by WZC / Funk Client)  WPA / WPA2 (by WZC / Func Client)  802.1x – TLS / 802.1x – PEAP (by WZC / Funk Client)  LEAP (by Funk Client)  WPA-TTLS (by Funk Client)
 TKIP  AES  IEEE Power Save 2.2 Installing the driver Step1. Install Realtek utility. Step2. Update driver ‘rtl8187B.sys’ Product Specifications Functional Specifications Standard IEEE 802.11b; IEEE802.11g; IEEE 802.11i draft Bus Interface USB Data Rate 802.11g compliant: 11, 5.5, 2, 1 (DSSS/CCK); 6, 9, 12, 18, 24, 36, 48, 54 (OFDM) Mbps data rates Media Access Control CSMA/CA with ACK Radio Technology 802.11g: DSSS/CCK, OFDM Modulation Techniques OFDM/CCK Network Architecture Ad-hoc mode (Peer-to-Peer) Infrastructure mode Operating Channel 802.11 b & g 11: (Ch. 1-11) – N. America, Taiwan 14: (Ch 1-14) – Japan 13: (Ch. 1-13) – Europe ETSI Frequency Range 802.11 b & g 2.412 ~ 2.462 GHz – N. America, Taiwan 2.412 ~ 2.484 GHz – Japan 2.412 ~ 2.472 GHz – Europe ETSI Transmit Output Power 802.11b 16 dBm 802.11g 14 dBm Receiver Sensitivity 802.11b 802.11g
11 Mbps: -84 dBm 5.5 Mbps: -86 dBm 2 Mbps: -87 dBm 1 Mbps: -88 dBm 54 Mbps: -68 dBm 48 Mbps: -70 dBm 36 Mbps: -73 dBm 24 Mbps: -76 dBm 18 Mbps: -80 dBm 12 Mbps: -82 dBm 9 Mbps: -83 dBm 6 Mbps: -84 dBm Security WEP/WEP2, WPA/WPA2, TKIP Operating Voltage 3.3V OS supported Windows 200/XP, 64bit OS will be available in Q1, 2005Antenna Type Dual antenna connector
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions: OEM integrator is still responsible for testing their end product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Without Co-located The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Taiwan 警語 : 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、 加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用， 並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 本模組於取得認證後將依規定於模組本體標示審合格籤，並要求平台上標示「本產品內含射頻模組：ID 編號」 The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user manual of the end product. The user manual which is provided by OEM integrators for end users must include the following information in a prominent location. “To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Label for end product must include “ Contains FCC ID:FCC ID: T5U-US105”

Navigation menu