Quanta Microsystems US302 IEEE 802.11n WLAN USB 2.0 module User Manual 1

Quanta Microsystems, Inc. IEEE 802.11n WLAN USB 2.0 module 1

User manual

Download: Quanta Microsystems US302 IEEE 802.11n WLAN USB 2.0 module User Manual 1
Mirror Download [FCC.gov]Quanta Microsystems US302 IEEE 802.11n WLAN USB 2.0 module User Manual 1
Document ID1070872
Application IDDqULifrTlv0xhGsy+yaPjA==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize21.67kB (270876 bits)
Date Submitted2009-02-20 00:00:00
Date Available2009-02-20 00:00:00
Creation Date2008-09-15 01:51:50
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2009-02-12 17:05:09
Document Title1
Document CreatorMicrosoft® Office Word 2007
Document Author: 95010905

Product Specification
US302-RL
Model Name: IEEE 802.11n WLAN
USB 2.0 Module
Version: 0.4
Date: 2008/9/15
Quanta Microsystems, Inc.
Tel:+886-3-3979000
Fax:+886-3-397990
5F, No.188, WenHwa 2nd RdKuei Shan Hsiang,
Taoyuan Shien, 333,Taiwan
Contents
1.
2.
3.
Revision History ................................................................................................... 3
Related Documents .............................................................................................. 3
Overview ............................................................................................................... 4
3.1.
Scope .......................................................................................................... 4
3.2.
Features ...................................................................................................... 4
3.3.
Specification .............................................................................................. 5
3.4.
3.5.
3.6.
4.
Mechanical Characteristics ........................................................................ 6
Module function Block Diagram ............................................................... 7
RoHS Compliant ........................................................................................ 7
Engineering sheets ............................................................................................... 7
Pins Out and Pin Descriptions ............................................................................... 7
第 2 頁,共 7 頁
1. Revision History
Date
Release
Author
Description
2008/5/24
0.1
Richard Chou
First release
2008/6/15
0.2
Richard Chou
Rx parameters modified
2008/8/15
0.3
Richard Chou
Tx power modified
2008/9/15
0.4
Richard Chou
Add mechanical drawing
2. Related Documents
Date
2008/6/10
第 3 頁,共 7 頁
Author
Ralink
Document(s)
RT3070 datasheet
3. Overview
3.1.
Scope
This document describes the specifications of US302 WLAN USB
module. The low power consumption and smaller size are suitable for USB
adapter.
US302 implements half-duplex OFDM, CCK, and DSSS baseband
processing supporting all IEEE 802.11n data rates. The MAC supports the
IEEE 802.11 wireless MAC protocol as well as 802.11i security, receive
and transmit filtering, error recovery, and quality of service(QoS), and
Extended Range technology, dramatically increasing WLAN performance
3.2.
Features
 BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK and CCK












modulation technique
Operates at 2.4GHz frequency band
802.11e compatible bursting
Supports Windows XP, Windows Vista, Linux kernel 2.6.10.
USB bus powered, external power is no required.
Support Pre-IEEE 802.11n (TGn draft 6.0), short GI and long GI,
20MHz and 40 MHz bandwidth. Data rate up to 150Mbps maximum.
Supports Ad-hoc mode in IEEE 802.11b, Ad-hoc G (802.11g OFDM
rates) and Ad-hoc N (802.11n rates) mode.
802.11n SSN technique (1Transmit/1Receive).
Supports Infrastructure mode in 802.11n,802.11b and 802.11g modes
Supports Site survey: 802.11n/g/b BSS and IBSS.
Supports USB adapter hot-swap, device driver disable/enable
Supports Radio On/Off in software.
Supports IEEE 802.1X,
Authentication modes: Open system, Share Key, Auto Switch,
IEEE 802.1x, WPA, WPA-PSK, WPA2, WPA2-PSK
ii Encryption method: WEP 64/128, TKIP, AES
 USB 2.0(High/Full Speed) and backward compatible with USB 1.1
(Full Speed).
第 4 頁,共 7 頁
3.3.
Specification
Standards
Conformity
Frequency
IEEE 802.11n(draft 3.0)
Range
11b/g/n: 2.412~2.4835GHz
11b/g: CH1~11
Type
USB 2.0 with 6pins connector
Channels
11n (HT20): CH1~11
11n (HT40): CH3~9
Modulation
Technique
OFDM/ BPSK/ QPSK/ CCK
Windows XP SP2 32bit/64bit
Device Drivers
Linux kernel 2.6.16
Data Rate
(Mbps)
Security
Windows Vista 32/64bit
Operating
Voltage
Warranty
DC 3.3V via USB bus power
1 year warranty limited
1Mbps to 11Mbps for 11b,
6Mbps to 54Mbps for 11g,
MCS0 to MCS7 for 11n HT20/HT40
Supports 64-bit & 128-bit WEP for
legacy mode
WPA/WPA2/WPS for all mode
Coverage
60Meters (Indoor)
Area
80Meters (Outdoor)
Temperature
0 ~ 60°C (Operation),
-20~70°C (Storage)
Data rate
Data rate
11Mbps CCK (11b)
11Mbps CCK (11b)
- 85 dBm
Sensitivity
54Mbps OFDM(11g)
- 70 dBm
(AntA+AntB)
11n HT20 MCS7
- 66 dBm
11n HT40 MCS7
- 63 dBm
Current
Consumption
(AntA+AntB)
第 5 頁,共 7 頁
Typical
Typical
Mode
Watts/mA@3.3v
11b TX
0.660/200
11g TX
0.594/180
11n HT20 TX
0.627/190
11n HT40 TX
0.660/200
11b RX
0479/145
11g RX
0.479/145
11n HT20 RX
0.479/145
11n HT40 RX
0.627/190
WLAN off
0.165/50
+16 dBm
Output Power 54Mbps OFDM(11g)
+13 dBm
(AntA)
6Mbps OFDM (11g)
+16 dBm
HT20 MCS7
+12 dBm
HT40 MCS7
+12 dBm
3.4.
Mechanical Characteristics
第 6 頁,共 7 頁
3.5.
Module function Block Diagram
3.6.
RoHS Compliant
US302RL is fully compliant with RoHS requirement.
4. Engineering sheets
Pins Out and Pin Descriptions
Pin no.
Definition
USB data differential input
Reset
3.3V
第 7 頁,共 7 頁
Pin no.
Definition
USB data differential input
Ground
Ground
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15/RSS-210 of the FCC/IC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC/IC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15/RSS-210 of the FCC/IC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Radiation Exposure Statement:
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body. This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter.
This device is intended only for OEM integrators under the following conditions:
1. The antenna must be installed such that 20 cm is maintained between the
antenna and users, and
2. The transmitter module may not be co-located with any other transmitter or
antenna,
IMPORTANT NOTE: In the event that these conditions can not be met (for example
certain laptop configurations or co-location with another transmitter), then the FCC/IC
authorization is no longer considered valid and the FCC/IC ID can not be used on the final
product. In these circumstances, the OEM integrator will be responsible for re-evaluating
the end product (including the transmitter) and obtaining a separate FCC/IC authorization.


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : No
XMP Toolkit                     : 3.1-702
Create Date                     : 2008:09:15 01:51:50Z
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2009:02:12 17:05:09+08:00
Metadata Date                   : 2009:02:12 17:05:09+08:00
Format                          : application/pdf
Creator                         : 95010905
Title                           : 1
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:c42ed4e1-b354-467e-9c5b-5595f694e1c5
Instance ID                     : uuid:14d46ef0-dac3-471c-8665-3cb54bf81fac
Has XFA                         : No
Page Count                      : 9
Language                        : zh-TW
Author                          : 95010905
EXIF Metadata provided by EXIF.tools
FCC ID Filing: T5U-US302

Navigation menu