Quanta Microsystems WU202 IEEE802.16e WiMAX USB Dongle User Manual WU202 v02
Quanta Microsystems, Inc. IEEE802.16e WiMAX USB Dongle WU202 v02
User manual rev2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1343475 |
| Application ID | nXAjOoqt7Z/GmyxSOvlIPA== |
| Document Description | User manual rev2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 73.45kB (918141 bits) |
| Date Submitted | 2010-09-15 00:00:00 |
| Date Available | 2011-03-20 00:00:00 |
| Creation Date | 2017-11-08 01:20:48 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-11-08 01:20:48 |
| Document Title | Microsoft Word - WU202_User Manual_v02.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | 98062901 |
Quanta
Inc.
Computer
Quanta WiMAX Connection Manager
Operator Guide
Version 1.1
Aug. 25, 2010
Quanta
Inc.
Computer
Fe de ra l C o m m unic a tio n C o m m issio n Inte rfe re nc e Sta te m e nt
This e q uip me nt ha s b e e n te ste d a nd fo und to c o mp ly with the limits fo r a C la ss B
d ig ita l d e vic e , p ursua nt to Pa rt 15 o f the FC C Rule s.
The se limits a re d e sig ne d to
p ro vid e re a so na b le p ro te c tio n a g a inst ha rmful inte rfe re nc e in a re sid e ntia l
insta lla tio n. This e q uip me nt g e ne ra te s, use s a nd c a n ra d ia te ra d io fre q ue nc y
e ne rg y a nd , if no t insta lle d a nd use d in a c c o rd a nc e with the instruc tio ns, ma y
c a use ha rmful inte rfe re nc e to ra d io c o mmunic a tio ns.
Ho we ve r, the re is no
g ua ra nte e tha t inte rfe re nc e will no t o c c ur in a p a rtic ula r insta lla tio n.
If this
e q uip me nt d o e s c a use ha rmful inte rfe re nc e to ra d io o r te le visio n re c e p tio n, whic h
c a n b e d e te rmine d b y turning the e q uip me nt o ff a nd o n, the use r is e nc o ura g e d to
try to c o rre c t the inte rfe re nc e b y o ne o f the fo llo wing me a sure s:
- Re o rie nt o r re lo c a te the re c e iving a nte nna .
- Inc re a se the se p a ra tio n b e twe e n the e q uip me nt a nd re c e ive r.
- C o nne c t the e q uip me nt into a n o utle t o n a c irc uit d iffe re nt fro m tha t to whic h the
re c e ive r is c o nne c te d .
- C o nsult the d e a le r o r a n e xp e rie nc e d ra d io / TV te c hnic ia n fo r he lp .
FC C C a utio n: Any c ha ng e s o r mo d ific a tio ns no t e xp re ssly a p p ro ve d b y the p a rty
re sp o nsib le fo r c o mp lia nc e c o uld vo id the use r's a utho rity to o p e ra te this e q uip me nt.
This d e vic e c o mp lie s with Pa rt 15 o f the FCC Rule s. O p e ra tio n is sub je c t to the
fo llo wing two c o nd itio ns:
(1) This d e vic e ma y no t c a use ha rmful inte rfe re nc e , a nd
(2) this d e vic e must a c c e p t a ny inte rfe re nc e re c e ive d , inc lud ing inte rfe re nc e tha t
ma y c a use und e sire d o p e ra tio n.
IMPO RTA NT NO TE:
FC C Ra d ia tio n Expo sure Sta te m e nt:
This e q uip me nt c o mp lie s with FC C ra d ia tio n e xp o sure limits se t fo rth fo r a n
uncontrolled environment.
This tra nsmitte r must no t b e c o -lo c a te d o r o p e ra ting in c o njunc tio n with a ny o the r
a nte nna o r tra nsmitte r.
Page 2
Quanta
Inc.
Computer
SAR compliance has been established in typical laptop computer(s) with USB slot, and
product could be used in typical laptop computer with USB slot. Other application like
handheld PC or similar device has not been verified and may not compliance with related RF
exposure rule and such use shall be prohibited.
Page 3
Quanta
Inc.
Computer
Contents
1.
Introduction ...........................................................................................................................................6
Document Scope...........................................................................................................................6
1.1.
2.
Install and Un-install Windows Driver and Connection Manager ........................................................7
2.1.1.
Un-installation of Windows Driver & Connection Manager........................................................7
2.1.2.
Execute InstallShield Wizard .......................................................................................................7
2.1.3.
Install with Second WiMAX device ...........................................................................................10
2.1.4.
Upgrade WiMAX Connection Manager.....................................................................................10
3.
Configuration by WiMAX Connection Manager................................................................................13
3.1.
Connection Mode .......................................................................................................................14
Auto Mode..................................................................................................................................14
3.1.1.
Profile .........................................................................................................................................15
3.2.
Scanning Setting .........................................................................................................................16
3.2.1
User Authentication ....................................................................................................................19
3.2.2.
How to Upgrade F/W ..........................................................................................................................20
4.
Trouble Shooting.................................................................................................................................24
5.
Why I can’t detect my device? ...................................................................................................24
5.1.
Why I can’t find any base station? .............................................................................................24
5.2.
Why I can’t connect to base station? ..........................................................................................24
5.3.
How to log debug information and report it? .............................................................................25
5.4.
What does LED activity mean? ..................................................................................................26
5.5.
Appendix .............................................................................................................................................27
6.
Create Device Information *.IFO file ........................................................................................27
6.1.
Device Authentication ................................................................................................................28
6.2.
User and Device Authentication .................................................................................................29
6.3.
Functional Button .......................................................................................................................30
6.4.
Profile .........................................................................................................................................31
6.4.1.
Scan ............................................................................................................................................32
6.4.2.
Network ......................................................................................................................................33
6.4.3.
Statistic .......................................................................................................................................34
6.4.4.
Tools ...........................................................................................................................................34
6.4.5.
Page 4
Quanta
Inc.
Revision History
Version
Release Date
Description
1.1
Aug. 25, 2010
Based on WU202 to update the document.
1.0
Apr. 30, 2009
1st User Guide Release
Page 5
Computer
Quanta
Inc.
Computer
1. Introduction
The WiMAX dongle supports IEEE 802.16e-2005 state of the art Scalable OFDMA based Technology. It
provides users a seamless broadband wireless access, video streaming at home, office or on
the move. To protect information transmitting through wireless network, standard security Sublayer PKMv2
EAP based user authorization/authentication for data encryption is supported.
The following chapters will show you how to install the software package step by step.
1.1. Document Scope
This document has been written based on:
- WCM: 02.01.06
- OS: Windows 7 x86-based PC, English Version
Page 6
Quanta
Inc.
Computer
2. Install and Un-install Windows Driver and Connection Manager
2.1.1. Un-installation of Windows Driver & Connection Manager
1.
Please EXIT the WiMAX Connection Manager
first.
2.
Please click “Start
All Programs
WCM
Uninstall WCM” to remove it.
2.1.2. Execute InstallShield Wizard
1.
Please plug in WiMAX device into the laptop
and execute InstallShield Wizard to install
windows driver and connection manager.
2.
Please click “Next” button.
Page 7
Quanta
Inc.
3.
If the laptop is off auto-install feature for
security reasons, please open “CD Driver:
WU202-GN…” and run “setup.exe”.
4.
Please click “Install” button to continue
installation.
5.
WCM InstallShield will pop out a message if
your laptop doesn’t install .NET Framework.
6.
Please check if your Windows has .NET
Framework 2.0 or plus, or WCM may not work
properly.
Page 8
Computer
Quanta
Inc.
7.
Prepare to copy configuration file to
C:\WiMAX.
8.
Windows will find new hardware and guide you
to complete installation.
9.
Please check “Always trust software from
“Sequans Communications”.” and click
“Install” button to continue installation.
10. It may take a few minutes to complete driver
installation.
Page 9
Computer
Quanta
Inc.
11. After InstallShield Wizard has successfully
installed WCM and driver, windows will prompt
a message.
12. Click “Finish” button to finish InstallShield
Wizard.
13. You can run the WCM from the WiMAX
Connection Manager icon on desktop or run
WCM from “Start
All Programs
WCM
WiMAX Connection Manager”.
2.1.3. Install with Second WiMAX device
1.
Each device is written with unique serial
number in the flash, so windows will
recognize each device as different one.
2.
Once you plug in the second device,
Windows will pop out “Found New
Hardware Wizard” and install driver
automatically.
2.1.4. Upgrade WiMAX Connection Manager
1.
This section will guide you how to upgrade to
latest software package in client side.
2.
Please make sure to plug in your WiMAX
device first.
3.
Please execute InstallShield of new WCM,
and click “Yes” button if you want to upgrade
the WCM.
Page 10
Computer
Quanta
Inc.
4.
Click “Next” button to start installing WCM.
5.
Click “Install” button to start install WCM.
6.
It will pop out a Question window. If you
want to keep the configuration settings,
please click “No” button.
Page 11
Computer
Quanta
Inc.
7.
It will show the message “Found USB/ PCIe
Device”.
8.
It may take a few minutes to complete driver
installation.
9.
Please click “Finish” button to exit the
Wizard.
Page 12
Computer
Quanta
Inc.
3. Configuration by WiMAX Connection Manager
1.
Please open WiMAX Connection Manager
firstly.
2.
Please move the mouse on the WCM and
press “Ctrl + Alt + F9” to show the
“Advanced” button for advance settings.
Please click “Advanced” button and input the
code “admin2”.
3.
Once you switch to Advanced View, WCM
will keep staying at Advanced View till you
exit WCM or minimize to system tray.
Page 13
Computer
Quanta
Inc.
4.
Please plug in WiMAX device and wait for
WCM detects device.
5.
After WCM detects WiMAX device, you can
start to set up the profile settings and EAP
parameters.
3.1. Connection Mode
3.1.1. Auto Mode
1.
If you have well setup frequency, bandwidth
and the other EAP settings. Please keep the
“Auto Mode” setting as “On” on “Profile”
tab, this button will let device always try to
automatically connect with BS.
2.
If “Auto Mode” is to “On” and the BSs
information are listed in Pre-defined List or
in History List on “Scan” tab, MS will
automatically connect with BS.
3.
Please note that if you ever double clicked the
NAP ID in the Base Station Scan List on
“Scan” tab, it means you didn’t want to
automatically connect with BS and the “Auto
Mode” will be “Off”.
Page 14
Computer
Quanta
Inc.
4.
Please remember to keep the “Auto Mode” as
“On” to let device automatically connect with
BS.
3.2. Profile
The user profile “WiAMXd.cfg” is stored in the directory “C:\WiMAX\”.
1.
Please plug in WiMAX device and wait for
WCM detects device as depicted in the right
screenshot.
2.
When WCM detects WiMAX device, you can
start to set up the EAP parameters.
3.
Please input all the information on “Profile”
tab, including PKM, Authentication, EAP
Method, NWG, Inner EAP, and so on.
4.
Please click “Save Setting” button to save
your setting.
5.
You also can re-set the “Operator Password”
for advance setting.
Page 15
Computer
Quanta
Inc.
3.2.1
1.
Scanning Setting
Please click “Scan Setting” button to enter
setting page.
2.
In the Scan Channel Setting field, you can
set up some searching criteria.
3.
CINR Threshold filter: searching BS if and
only if CINR is higher than specified value
(dB). Minimum: -20, and maximum: 40.
4.
Period setting: Period (0) which is initial
period in second after which the terminal
restart scanning procedure. Minimum: 0, and
maximum: 255.
5.
Retry setting: (n) configurable maximum
value of the countdown procedure. Minimum:
0, and maximum: 50.
Page 16
Computer
Quanta
Inc.
6.
In the Center Frequency List field, you can
set up some specified frequency you want.
7.
Frequency Range: please select your target
and frequency range according to what kind of
WiMAX device you used.
8.
Bandwidth: please select your preferred
bandwidth in KHz. WCM supports
mix-bandwidth scanning mechanism.
9.
Frequency: please input your preferred
frequency in KHz according to what kind of
WiMAX device you used.
10. Please click Add button to add it into
frequency list.
11. Please select frequency from frequency list
and click Delete button to remove it from the
list.
12. You can click Clear All button to clear all
setting of Center Frequency List.
13. In the Frequency Range List field, you can
set up some specified frequency range you
want.
14. Frequency Range: please select your target
frequency range according to what kind of
WiMAX device you used.
15. Frequency Step: please select increasing step.
16. Bandwidth: please select your preferred
bandwidth in KHz. WCM supports
mix-bandwidth scanning mechanism.
17. Start Frequency: please select starting
frequency in KHz according to what kind of
WiMAX device you used.
18. End Frequency: please select ending
frequency in KHz according to what kind of
Page 17
Computer
Quanta
Inc.
WiMAX device you used.
19. Please click Add button to add it into
frequency list. WCM supports maximum up
to three sets of frequency range list.
20. Please select frequency from frequency list
and click Delete button to remove it from the
list.
21. You can click Clear All button to clear all
setting of Center Frequency List.
22. If you have confirmed all your setting, please
click Save Setting button.
23. This device will auto-reboot in order to make
your settings become effective.
Page 18
Computer
Quanta
Inc.
Computer
3.2.2. User Authentication
This section only guide you to connect with BS by User Authentication, for Device Authentication and
User and Device Authentication, please refer to chapter 6.
1.
Please enable PKM by selecting the
“PKMv2_EAP” option.
2.
Please select “User Authentication” as your
authentication method. WCM will select EAP
Method as “EAP-TTLS”.
3.
Please select inner EAP method, such as PAP,
CHAP, MSCHAP and MSCHAPV2.
4.
Please input postfix (Realm) of “Outer
Identity”.
5.
Please load your CA Certificate.
6.
Please input “User ID”.
7.
Please input “User Password”.
8.
Please select NWG spec as R1.0, Draft or No
Decoration.
9.
Please click “Save Setting” button to save all
authentication settings.
10. If you want to reset to default setting, please
click “Reset” button.
11. Now, you can start connecting to BS
successfully after setting scanning method
through scan setting button as shown in
section 3.1.
Page 19
Quanta
Inc.
4. How to Upgrade F/W
1.
This section will guide you how to upgrade
the F/W of the device.
2.
Please click “Upgrade” button on ‘Tools” tab
to start the F/W upgrade wizard.
3.
Please choose “Upgrade firmware from a
file”, and then click “Next” button.
Page 20
Computer
Quanta
Inc.
4.
Click “Read Firmware” button to browse
the new F/W file.
5.
Please browse the new F/W file and then
click the “Open” button.
6.
Please click “Details” button if you want to
check the new F/W information.
Page 21
Computer
Quanta
Inc.
7.
It will show the file name of new F/W in the
window, then click “Start Upgrade” button
to start upgrade procedure.
8.
The message is to notify you to start the
upgrade procedure.
9.
The device will auto reboot and then start to
upgrade new F/W. Please don’t power off
device during the upgrade procedure.
10. In the upgrade procedure, the LED will
display “Green Flashing” light
11. There are total 5 files to transport and burn to
flash, it will take a few minutes to do this.
Page 22
Computer
Quanta
Inc.
12. After all files are burned success, the device
will reboot automatically and display a
successful message.
13. Please click “Close” button to exit the F/W
upgrade wizard.
14. Please click on “Device” tab to check if the
F/W version is the same with new F/W
version.
Page 23
Computer
Quanta
Inc.
Computer
5. Trouble Shooting
5.1. Why I can’t detect my device?
1. If there is a yellow exclamation point on WiMAX Network Adapter, please re-install the
driver from
2. C:\Program Files\WCM\Driver\USB.
Please check if you have installed software package successfully. If not, please uninstall WCM, reboot your
3. computer and reinstall it again.
Please check if LED function is OK on your device,
I.
II.
4.
if YES,
i.
Please uninstall WCM
ii.
Please reinstall software package again.
if NO,
i.
Please unplug and plug device and check it again.
Hibernation mode issue: In order to avoid an issue caused by Microsoft Vista when operating system
recovers from hibernate mode, please update the hotfix provided by Microsoft website.
5. http://support.microsoft.com/kb/KB946723
Blue Screen issue: In order to avoid abnormal situation caused by Microsoft XP SP2, when user uses
configure editor, please update the hotfix provided by Microsoft website.
5.2. Why I can’t find any base station?
1. Please check if your BS is still alive or not?
2. Please check your bandwidth and frequency setting is correct.
3. If your setting is correct and you still can not find any BS, please reboot your computer and try it again.
4. If you still can’t find BS, please report it and contact your support team.
5.3. Why I can’t connect to base station?
1. Please check if your BS is still alive or not?
2. Please check if WCM detects your device and LED function of device works.
3. If WCM can’t detect your device, please refer to 5.1.
4. If WCM can detect your device and also find BS, but you can’t connect to BS, please check if your profile
setting is correct, including user ID, password, CA, and etc.
5. If you still can’t connect to BS, please exit WCM and unplug and plug your device and try it again.
6. If you still can’t connect to BS, please report it and contact your support team.
Page 24
Quanta
Inc.
5.4. How to log debug information and report it?
Please open WCM and click on “Tools” tab.
1. For CLI window:
I.
Please click “Popup CLI window” button and input the administrator code “22822281”.
II.
You can run the CLI command and get the response in this window.
III. The log file is stored in “C:\Program Files\WCM\WiMAXlog.txt”.
Page 25
Computer
Quanta
Inc.
2.
Computer
For Debug Message
I.
Please click “Debug Message” button that will pop out another window to have scanning, network
link status and EAP log.
Please check application type and message level you want to filter messages. You can click “Pause”, “Start”,
“Clear”, “Save As”, and “Load” button to control tracking messages.
5.5. What does LED activity mean?
The different state information for WU series is as follows:
1.
USB dongle:
LED
Device Activity
LED Status
Initialized
Green
Firmware Upgrade
Green (Flashing)
No Connection
Green
Normal Operation
Blue
Page 26
Quanta
Inc.
6. Appendix
6.1. Create Device Information *.IFO file
1.
If you would like to set up a WCM with
security, especially Device Authentication and
User + Device Authentication, please use
WCM to generate the Device Authentication
Information file firstly.
2.
WCM will import all your necessary
certificates and generate a file named *.ifo
format.
3.
Please enable PKM by selecting
PKMv2_EAP.
4.
Please select “Device Authentication” as
your authentication method.
5.
Please choose “Host PC” item and click
“Create New” button from “Get Device
Authentication Information File from…”
field.
6.
Please select your Certificate files.
CA Certificate file
Device Certificate file
Private Key Certificate file
7.
Enter your Key Password. If there is no
password for authentication, please keep it
empty.
8.
Select the directory you want to place the
*.IFO file. Please choose “Host PC” item.
“WiMAX Device” item is for feature.
9.
Click “Make” button to generate *.ifo file.
10. You have created Device Authentication
Information File successfully.
Page 27
Computer
Quanta
Inc.
6.2. Device Authentication
1.
Please follow section 6.1 to create Device
Authentication Information File before you
set up device authentication.
2.
Please enable PKM by selecting the
“PKMv2_EAP” option.
3.
Please select “Device Authentication” as
your authentication method. WCM will select
EAP Method as “EAP-TLS”.
4.
Please check the “Outer Identity”, it should
be “0017C4XXXXXX”.
5.
0017C4XXXXXX is the MAC address of
your device. Please type ipconfig/all in the
DOS command window to check whether it
matches your MAC address or not.
6.
Please input postfix (Realm) of “Outer
Identity”.
7.
Please load your CA Certificate.
8.
Please load your Device Authentication
Information File from your local hard disk.
9.
You can click “Create New” button to create
new one used for device authentication.
10. Please select NWG spec as R1.0 or Draft or
No Decoration.
11. Please click “Save Setting” button to save all
authentication settings.
12. If you want to reset to default setting, please
click “Reset” button.
13. If the “Outer Identity” is empty, please exit
this WCM and take out your WiMAX device.
14. You must plug in your WiMAX device firstly
Page 28
Computer
Quanta
Inc.
before you configure device authentication,
otherwise WCM can NOT detect and get your
device MAC address and can NOT put its
MAC address as outer identity for device
authentication.
15. Once you have plugged in your WiMAX
device, please open WCM and wait for 5
seconds for WCM to initialize your device
and get MAC address. Then you can start to
configure device authentication.
16. Now, you can connect to base station
successfully.
6.3. User and Device Authentication
1.
Please follow section 6.1 and section 6.2 to
create Device Authentication Information File
before you set up user and device
authentication.
2.
Please enable PKM by selecting the
“PKMv2_EAP” option.
3.
Please select “User and Device
Authentication” as your authentication
method. WCM will select EAP Method as
“EAP-TTLS”
4.
Please select Inner EAP, such as PAP, CHAP,
MSCHAP and MSCHAPV2.
5.
Please input postfix (Realm) of “Outer
Identity”.
6.
Please load your CA Certificate.
7.
Please input “User ID”.
8.
Please input “User Password”.
9.
Please load your Device Authentication
Page 29
Computer
Quanta
Inc.
Information File from you local hard disk.
10. You can click “Create New” button to create
new one used for device authentication.
11. Please select NWG spec as R1.0 or Draft or
No Decoration.
12. Please click “Save Setting” button to save all
authentication settings.
13. If you want to reset to default setting, please
click “Reset” button.
14. If the “Outer Identity” is empty, please exit
this WCM and take out your WiMAX device.
15. You must plug in your WiMAX device firstly
before you configure device authentication,
otherwise WCM can NOT detect and get your
device MAC address and can NOT put its
MAC address as outer identity for device
authentication.
16. Once you have plugged in your WiMAX
device, please open WCM and wait for 5
seconds for WCM to initialize your device
and get MAC address. Then you can start to
configure device authentication.
17. Now, you can connect to base station
successfully.
6.4. Functional Button
The following Configuration File parameters affect the WCM behavior.
Page 30
Computer
Quanta
Inc.
6.4.1. Profile
1.
“Auto Mode” On/Off, select on to enable
automatic connection.
2.
“NWG R1.0.0” option, use decoration with
the format {am=1} preceding outer identity.
3.
“NWG Draft” option, use decoration with
the format {1} preceding outer identity.
4.
“No Decoration” option, use no decoration
preceding outer identity.
5.
“Save Setting” button, click to save current
setting into active profile.
6.
“Reset” button, click to reset current setting
to default.
7.
“Generate” button, click to generate random
outer identity.
8.
“Static Outer Identity” option, check it to
use static outer identity as user defined one.
9.
“Save” button, click to save operator
password once you change it.
10. “Scan Setting” button, click to open scan
setting.
Page 31
Computer
Quanta
Inc.
6.4.2. Scan
1.
“Disconnect” button, click it to disconnect
with current base station. If your WCM is in
“Auto Mode On” state, WCM will reconnect
to BS automatically. This action of
“Disconnect” button will not cause WCM to
switch off Auto Mode.
2.
“Scan Base Station” button, click it to do
manual scanning. This function is valid if and
only if you switch “Auto Mode” off.
3.
“Start/Stop” button, click it to start/stop the
WiMAX RF.
4.
“Operator Allowed List” button, click it to
add, delete, and clear allowed operator list.
5.
“Add” button, click it to add new operator ID
into allowed list.
6.
“Clear All” button, click it to clear all
allowed list.
7.
“Load Default” button, click it to load
default allowed list.
8.
“Save Setting” button, click it to save current
operator allowed list.
9.
“Close” button, click it to close current
window.
Ex.,
Target BS group1 (HEX format)
00:00:17:10:21:14
00:00:17:10:21:15
00:00:17:10:21:16
00:00:17:10:21:17
So, you can define the Start Operator ID and mask1
Page 32
Computer
Quanta
Inc.
as
Start Operator ID = 00:00:17:10:21:14
mask1 = FF:FF:FF:FF:FF:FC
Target BS group2 (HEX format)
00:00:18:10:11:11
00:00:18:10:xx:yy
So, you can define the Start Operator ID and mask2
as
Start Operator ID = 00:00:18:10:11:11
mask2 = FF:FF:FF:FF:00:00
6.4.3. Network
1.
“IP Release” button, click it to release current
IP address.
2.
“IP Renew” button, click it to renew the lease
time of current IP address.
NOTICE:
IP release/renew buttons are for you to manually
release/renew IP address. Basically, you don’t need
to do that, unless MS can not release/renew IP
address. However if MS enters network entry and
gets IP address successfully. Once if you click IP
release button, BS will deregister MS and force
MS to do network entry procedure.
Page 33
Computer
Quanta
Inc.
6.4.4. Statistic
1.
“Service Flow Refresh” button, click it to
refresh the status of service flow.
6.4.5. Tools
1.
“Popup CLI Window” button, click it to
show a CLI window for CLI commands.
2.
“Upgrade” button, click it to open upgrade
wizard.
3.
“Debug Message” button, click it to open
Debug Message window.
4.
IOT block, set IOT mode for different BS.
5.
Debug Setting block:
Debug Port: UDP port “1234”
Debug IP: IP address “127.0.0.1”.
Enable debug message: Enable to show the
debug messages in Debug Message tool.
Save Debug Setting: Save the debug settings.
Page 34
Computer
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res Author : 98062901 Create Date : 2010:09:07 17:03:48+08:00 Modify Date : 2010:09:14 22:19:00-07:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2 Metadata Date : 2010:09:14 22:19-07:00 Format : application/pdf Title : Microsoft Word - WU202_User Manual_v02.doc Creator : 98062901 Document ID : uuid:630bb7dc-7ed3-434b-afcb-31733840232c Instance ID : uuid:c102a2be-a37b-4e96-acaa-8a67369f5b4c Page Count : 34EXIF Metadata provided by EXIF.tools