Quanta Microsystems ZM108 ZigBee 2.4GHz Module (1T1R) User Manual Product Spec ZM108 v02

Quanta Microsystems, Inc. ZigBee 2.4GHz Module (1T1R) Product Spec ZM108 v02

User Manual

Design Specification Model No.: ZM108 Model name: ZM108 IEEE 802.15.4 RF4CE ZigBee transceiver module Version: v0.1 Date: July 15, 2010 Quanta Microsystems, Inc. Tel： +886-3-3979000 Fax：+886-3-397990 5F, No.188, WenHwa 2nd RdKuei Shan Hsiang, Taoyuan Shien, 333,Taiwan
U.S. Regulatory Wireless Notice Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna, As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: T5U-ZM108”. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
Contents 1. Revision History ............................................................................................................... 3 2. Overview ........................................................................................................................... 4 2.1. Scope...................................................................................................................... 4 2.2. Features .................................................................................................................. 4 2.3. Specification .......................................................................................................... 5 2.4. Mechanical Characteristics .................................................................................... 6 2.5. Interface definition................................................................................................. 7 2.6. RoHS Compliant .................................................................................................... 8 2.7. EMI EMC certifications......................................................................................... 8 Page 2
1. Revision History Date Release Author Description Jul 15, 2010 0.1 Jack Ong First release Page 3
2. Overview 2.1. Scope This document describes the specifications of ZM108 IEEE 802.15.4 transceivers module. The low power consumption and smaller size are suitable for consumer electronic. ZM108 also provides a cost-effective solution for short-range data links and networks. 2.2. Features Extremely low cost Ease of implementation Reliable data transfer Short range operation Very low power consumption Appropriate levels of security Can be used globally Page 4
2.3. Specification Absolute Maximum Ratings Rating Symbol Value Unit Power Supply Voltage VBATT, VDDINT -O.3 to 3.9 Vdc RF Input Power Pmax 1O dBm Storage Temperature Range Tstg -2O to 7O °C Operating conduction Rating Symbol Min Typ Max Unit Power Supply Voltage VBATT, VDDINT 2.O 3.0 3.6 VDC Operation Temperature Rang TA -1O 25 6O °C Operation Frequency f 2.4O5 2.48 GHz Transmit Center Frequency Tolerance -4O +4O ppm Characteristic (operating voltage=3.OVDC ; temperature=25°C) Characteristic Min Typ Max Unit DC Electrical Characteristics Normal mode current 20 40 mA Idle mode current 1 6 mA Transmit Transmit Power -4 O 3 dBm Error Vector Magnitude (EVM) (over temp.) --- 18 35 Receiver Sensitivity for 1% Packet Error Rate (PER) -92 -86 dBm Maximum Input Power 10 dBm Channel Rejection for 1% PER (desired signal-82 dBm) +/-5 MHz (adjacent channel) -4O dBm +/-1O MHz (alternate channel) -35 dBm >= 15 MHz -35 dBm Energy Detect / Link Quality Indicator -5 5 dB Page 5
2.4. Mechanical Characteristics Outline dimension drawing Page 6
2.5. Interface Definition CON6 Pin Pin Name 1 Reserve 2 RST_N 3 GND 4 RX (TBD) 5 TX (TBD) 6 Voltage input Page 7
2.6. RoHS Compliant ZM1O8 is fully compliant to RoHS requirement. 2.7. EMI EMC Certifications ZM1O8 is fully compliant with FCC, CE regulatory requirements. Page 8

Navigation menu